SD planned revenues from inactive price condition

Hello,
please assist.
Revenue elements from the SD pricing procedure (coditions) that are not statistical are updated as planned revenue on the sales order item (within table COSP with the business transaction SDOR).
The relevant revenue accounts are determined within the revenue account determination.
Is the revenue account determination processed also for SD conditions, which are inactive (KOMV-KINAK)?
We have got an issue, that also some conditions, which are inactive because of subsequent price (KOMV-KINAK=Y) are updated into the COSP-SDOR as planned revenue. Therefore the position has more planned revenue within the result analysis and as we use the revenue based result analysis method, it influences the WIP calculation.
Thanks in advance
P

Issue solved.
The reason was the SAP Note 1062462.
This note is used to extract also inactive conditions into BW. Unfortunatelly, due to this modification, the inactive conditions are not deleted from xmckomv, which is used also for updating the planned revenues (and other SIS statistics, which are based on the conditions), so they were added to the planned revenues.
We have to deimplement the note.

Similar Messages

  • Planned revenue from Sales document

    HI,
    We are using Assembly processing where the Project is triggerred thru sales order.The planned revenue from the sales order can be seen in CNS41.
    Apart from this I am creating some other sales order which I assign manually to the same project but at another WBS but the planned revenue amount of which doesn't flows in CNS41.I thnk it shuld get reflected in revenue report wht culd be solution ?..
    At assembly sales order document type is with item category TAD and for further sales orders we r using item category TAN wht is significance of this ?
    Pl suggest.
    Edited by: Shrikrishna Rasam on Sep 26, 2008 3:28 PM

    Hi,
    Pl check whether account determination is taking place in sales order. VA02->Environment->Analysis->Account determination.
    Most likely, account determination may not be taking place.
    If so, pl do necessary customization -
    SD->Basic Functions->Account Assignment/ Costing->Revenue Account determination
    Regards
    Murali

  • Plan Revenue from Billing plan..Report

    Hi Expert,
    If i have plan the revenue hierarchically and after that I am planning the revenue from Billing Plan ..in SLR531 Report ..which values will be come...
    Is there any report where I can see all [lan values for revenue from billing plan....
    Regards
    RAMA. S Sharma

    Not answerd but clousing the thread
    Regards
    Rama Shanker sharma

  • Planned revenues on WBS element

    Hello,
    I have a problem in that my WBS elements are not recognizing planned revenue from its adjoining sales order. I have checked everything from a PS point of view such as planning profile etc... and all looks okay.  I have also checked the AcctdetermProc. on the Billing type "KOFI00", the billing type on the sales document type and the billing relevance "I" on the item category. There are no issues with credit control. I have also reviewed many notes such as 96404 without any success.
    Could you please suggest other problems that may be causing it and how to go about fixing it
    Many thanks,
    Ashleigh Crosher
    [email protected]

    Hello Ashleigh Crosher,
    This is with referance to your similar problem in WBS not recognizing planned revenues (Sales Pricing). As per your steps even I have checked all the setting in PS as well in SD but still not able to short out the problem. Can you please let me know is your problem solved, if yes then let me know how to solve it.
    Thanks & Regards,
    Tushar

  • Planned revenue not update in project

    Dear All
    I have a scenario project triggered from sales order. When my sales order saved my project get triggered in background and my planned revenue from sales order automatically flow in project report. Up till now I donu2019t have any issue.
    Now my client required milestone billing activate in system. I have done necessary configuration to activate milestone billing and also maintain revenue element for billing plan in planning profile with element type 11. When I create milestone for activity and maintain invoicing percentage its copy to my billing plan in sales order but now my planned revenue not flow in report.
    Please let me know any specific option which I have missed out.
    Regards

    closed

  • Price conditions from Info Record to PO

    Hi,
    While creating PO, Price conditions flow from Purch.info record.
    My requirement is => In the Item detail Conditions Tab, the price should not be available for editing (i.e.it should be in display mode) at end user level. If we need to modify the Amount against any condition it should be done only in info record only.
    How to address this requirement.
    Regards,
    Baskar

    Hi,
    1. Go to SPRO > MM > Purchasing > Authorization Management > Define Function Authorizations for Buyers > Function Authorizations: Purchase Order > Here "New Entries" and define Function Authorization Key as "01" and give description.
    OR use T. Code - OMET
    Here under "General parameters" subscreen,
    Activate "Display conditions" indicator and assign Field selection as "$DE1", do not select "Enter conditions"
    In "Possible ref. objects", select "W/o reference" otherwise reference documents (for e.g. PR, RFQ, etc...) for PO creation will become mandatory.
    2. Now go to SU01 > Enter User ID > Parameters Tab > Here for Parameter ID EFB i.e. Function Authorization: Purchase Order, maintain value "01" and check in PO field selection will get applied for that user.
    Now check in PO, Conditions will become in display mode.

  • How to avoid user from entering new price condition in return order

    Dear Expert
    We are facing a scenario where we make return order; the Price is copied from the invoice. And it is working perfectly. The system does not allow us to change the price.
    The issue we are facing here is that user can input new condition like discount /premium and change the net value for the return order pricing, and this will reflect in the credit note for returns.
    Is there a way to restrict the user from entering any pricing condition in the header or item conditions tab.
    although we cannot change the original price coming from invoice referenced for return order, but the user can input new price conditions as below. This must not be allowed.
    The price must come according to the Qty being referenced.
    While making the credit for returns, the user has a chance of further making changes to the net value by adding new conditions. Hence this must also be restricted for any changes.
    Thanks
    Edited by: Lakshmipathi on Jan 31, 2012 6:55 PM
    Thread Locked - Reason Cross Post

    okie .... i will tell briefly what is the problem ....
    Take a scenario wherein a user has logged into my application and he is performing a task which will put his user id and his employee id into the session. Then he opens another window by using either ctrl+n or through files->new window.
    So now a new browser will open but the session will be same ..... in this newly opened browser, user performs some operation which will remove the user id and employee id from the session .... Now if he again comes back to the first window and tries to do some operation, then a null pointer exception will be thrown saying that the employee id is null .... because he has deleted that in the newly created browser ..... to avoid this situation what can we do ???? can you please help me in this regard ??? you got my problem right !!!

  • CRM 5.0 ISA insert new price condition from order entry screen

    In CRM 4.0 we wrote a custom field on the order entry screen that shows the list price (sub 1),  we allow the user to change this value (inserts a PB00 price condition in the item pricing) and validates the change is within a certain % of the list price.
         The jco method we used in 4.0 no longer exist in 5.0, been using the 55 page IPC VMC PDF in note 809820 but still can't figure out how to replicate.
        Any help on what class / method might help us insert a manual price condition from ISA would be appreciated.

    It could be possible to use CRM BAdI to do this function.

  • Copy price conditions from order to invoice

    Dear experts,
    I have a problem I can't solve myself !
    When we create an invoice from an order, the conditions are copied using a predefined pricing procedure in customizing ... Now, I think I have a strange problem ... When the conditions are copied from the order to the invoice, the inactive conditions are not copied (which seems normal) ... Now, I would like one inactive pricing condition (ZPRO) to copied always, because this one is mandatorry on invoice and otherwise I get an error while copying ... Is there a userexit where I can force this ? And how do I implement this ?
    Thanks in advance for the answers ...
    Greetz,
    Kurt.

    Hi,
    Try this.
    GO to the VTFA transaction..
    Give the source sales document type and target billing type..
    Press item button..Choose the item category..
    In the pricing type give "D" (Copy pricing elements unchanged)...And check again..
    This might work..
    Thanks,
    Naren

  • Automatically update of the info record price conditions from last purchase

    Dear.
    I need to massive update the info record price conditions from the last purchase order price for a list of materials.
    Does exist a standard transaction where I can I do this ?
    Thanks.

    hi,
    Yeah, I just checked it..
    Its not possible in Std. SAP system...
    There is no field provided for the same...
    the other way, but doesn't applies to you...as you are doing massive job...
    still if req. then check..
    The other way is:
    Maintain Quotation and ref. it in inforecord...price gets updated easily from it...
    Regards
    Priyanka.P

  • I want to retrieve data from p0001-PLANS based on the below condition,

    Hi,
    I want to retrieve data from p0001-PLANS
    based on the below condition
    select stext from hrp1000 where plvar = '01' and otype = 'S' and objid = p0001-plans and begda GE pn-begda and endda LE pn-endda.
    Thanks,
    Rama.

    Hi
    Based on the Query you have specified thoise are stoerdin an Internal table- then
    select stext from hrp1000 into table t_hrp where plvar = '01' and otype = 'S' and objid = p0001-plans and begda GE pn-begda and endda LE pn-endda.
    The check table for this PLANS is T528B .
    if t_hrp[] is not intitial.
    select * from t528B intot table t_528 where plans eq t_hrp-plans.
    endif.
    Now you can get the PLANS data.
    Refer to the Text tbale for PLANS -  T528T
    To get the TEXTS -
    if t_hrp[] is not initial.
    select * from T528T into table t_528T where plans eq t_hrp-plans.
    endif.
    Regards
    Lekha

  • KMANU field value download from R/3 to CRM for price Condition type

    Hi
    We done changes for KMANU field in R/3 - price condition type and that changes have to download from r/3 to CRM. I was tried below object adapters to update field value (R/3 u2013 table name: T685A - KMANU) from R/3 to CRM (Table :PRCC_COND_CT u2013 KMANU). Could you any one tell me how to resolve it. Its urgent plz
    u2022         DNL_CUST_CNDALL
    u2022         DNL_CUST_CND
    u2022         DNL_CUST_PRC
    u2022         DNL_CUST_FGD
    u2022         DNL_CUST_PRICE
    Appreciate your help...........
    Regards
    Sri

    Hello Sri,
    Ideally object DNL_CUST_CNDALL should get all changes done to customizing setting in R/3 to CRM.
    Did you check the logs in txn CND_MAP_LOG_DISPLAY in CRM?
    You can get some hints there, if any error has occured during the download.
    Best Regards,
    Shanthala Kudva.

  • Extracting Inactive Pricing conditions from 2lis_11_vaikon

    Hi,
    Currently we are able to extract all the pricing conditions except Inactive conditions.
    Can any one advice how to extract inactive pricing conditions from 2lis_11_vaikon.
    Regards,
    Rahul.

    see note 1062462
    (you can find that via a simple Google search btw)

  • Price condition from R3

    Hi all,
    I'm on SRM 5.0 ECS.
    My focus is the PO. I need the same price condition (with the same access sequence) of R/3 on SRM.
    There is a copy functionality or a direct relation with the backend?
    thanks
    enzo

    Hi
    To replicate new pricing conditions from R/3 to EBP run the program BBP_UPLOAD_PAYMENT_TERMS
    Payment terms you can see in IMG:
    Supplier Relationship Management -> SRM Server -> Cross-Application Besic Settings -> Create Payment Conditions
    made part of maitenance view BBPV_PTERM_LOCAL.
    This view is only to maintain local payment terms, that means created in SRM, not in R/3.
    If you replicate your payment terms from R/3 backend (using report BBP_UPLOAD_PAYMENT_TERMS ), there are stored in table BBP_PAYTERM as being backend dependent (those seen in BBPV_PTERM_LOCAL are also stored in this table).
    Concerning texts for those payment terms, there are in table BBP_PAYTERM_TEXT, for all languages in which they exist in R/3. Check in R/3 with view T052.
    Be careful, i saw for SRM 5.0 that in order to have entries in BBP_PAYTERM_TEXT, corresponding data must exist in R/3 view T052U.
    This means that, in R/3 transaction OBB8 (change view "Terms of Payment"), your payment term must have had field "Own explanation" filled-in at one moment in order to create row in T052U.
    If not, T052U-TEXT1 is not updated, so payment term will not be created for the concerned language in SRM.
    Regards
    Krish

  • Extracting product price conditions from CRM

    Hi,
    Is there a business content extractor available to extract product price conditions from product master records in CRM to BW?
    Thanks very much.
    Rui

    Hallo
    Please have a look
    http://help.sap.com/saphelp_nw04/helpdata/en/04/47a46e4e81ab4281bfb3bbd14825ca/frameset.htm
    I hope this can help you
    Mike

Maybe you are looking for