Sd: TAX CODE MWST

Hi experts,
how I can implement different tax code for different document?
I mean in the sales order, I have tax code MWST (V3) =21%, then in the credit note I need to implement a different tax code for MWST egual to RC=21,00%. The problem is that this document have the same pricing procedure.
could you help me please??
thanks in advance

maintain ur document type as a new field in the access and link that access to the access sequence then ur probrlem will be solved.

Similar Messages

Condition type MWST tax code A1 does not exist

Hi all,
I'm facing the problem while I'm releasing Billing doc to Accounting. This is the error
Condition type MWST tax code A1 does not exist
Message no. FF762
Diagnosis
When calculating tax, the system tried to determine the condition amount and the condition number from tables A003 and A053 using the specified condition type and tax code. However, no values were found there.
System Response
The specified amount cannot be posted in FI.
Procedure
Check the Customizing settings for the specified tax code. Check whether the validity period (possible with tax jurisdictions) is defined.
I have already checked FTXP, and the Tax Code is already there.
I have already checked the condition record, and it is already there,
Maybe I have missed something...?
Thanks before for all your help
Regards,
Rizki Harris

Hi Typewriter,
1. Check in a previously created invoice, accounting document - the tax code? (FB03) is it A1?
   --> the tax code is A1
2. In VK12, MWST do you have other values of % tax (e.g. 0%). In a sales order, give appropriate Tax classification values for CMR, MMR so that MWST value = 0. Create invoice and check if you are getting the message
   --> in VK12 for Key Combination Domestic Taxes :
        TaxCl1Cust   TaxCl.Mat     Name                                 Amount     Valid from    Valid To         Tax Code
        0                    1                  Tax Exempt Full Tax                          25.07.2011   31.12.9999    A0
        1                    0                  Liable For Taxe No Tax                        01.01.2008   31.12.9999    A1
        1                    1                  Liable forTaxeFull Tax              10       25.07.2008 31.12.9999    A1
     --> I still don't understand what do you mean by CMR, MMR ?
3. Condition type MWST is not allowed to be processed manually..
Regards,
Rizki Harris

In sales order for the condition type MWST, **Tax code** is displaying wron

Hi
In sales order for the condition type MWST, *Tax code* is displaying wrongly at header level i.e. FF instead of AO (under account determination tab)
AO tax is 0% but for FF it is 19%
I have checked with the Access sequence it is picking access 08 correctly according to this it should show AO in tax code field for MWST but it is not so..
There is a manual change for tax classification for material master in va02 initially it was blank now it is changed to ' 0 ' is any way influencing....?
Even if I consider material tax classification and customer tax code should not be FF because tax code FF is not maintained for the combination of access sequences for condition type MWST
Please help me.
Rajendra Prasad

Dear Rajendra,
There is a manual change for tax classification for material master in va02 initially it was blank now it is changed to ' 0 ' is any way influencing....?
Definitely material Tax classification will influence to determine the Tax code.
-->So Make sure that customer and material master having proper tax classification indicator.
-->Have you Update the price after changing the tax classification in the sales order.by going to item dat -->condition tab then click on Update push button bottom of the conditions screen.
-->Once again the check the condition record maintanence also for your MWST access sequence.
I hope this will help you,
Regards,
Murali.

MWST Tax code

Hi All,
MWST condition type is only available in Purchasing pricing procedure MM not in Tax procedure under FI.
1) How can i use this condition type & post value to VST key.
2) should i include MWST in Tax procedure also.
Pls advise how to use this condition type.
Regards
Ashok

Dear Ashok,
In ME11 on purchaisng screen enter the tax code. If you want to determine the price with the MWST tax condition then you need to use MEK1 ohterwise the tax amount will comes from tax pricing procedure from FI.
Also, visit the following thread:
Diff B/ween UTXJ and MWST Tax Condition.
Hope this will help.
Regards,
Naveen.

Condition type MWST tax code S0 does not exist

Hi, Pls advice how can I eliminate that idoc error message:
"Condition type MWST tax code S0 does not exist"
Should I maintain tr VK13 as well?

Does S0 exist in FTXP?
If not create it there?
If it does, check the config to make sure it picks up a GL account and account key MWS

Tax Percentage NOT Refresh for MWST Condition when Tax Code Change

Hi All,
I have maintained MWST condition on Purchase Order with a default value P1 (10%).
During data entry, when I attempted to overwrite the tax code to P0 (0%), under Condition tab the tax percentage still showing 10% instead of refresh the rate according to the tax code.
Is this a config error or system behaviour? Are there any SAP Note that I can apply to fix the problem?
Applied SAP Note 655335 - ME22 ME22n tax at service level - Doesn't seem to fix the problem.
Regards,
Sarah

Hi
I think this may useful to U
Condition Type for Adding VAT
Definition
A condition type that you use to show the VAT amount in the pricing procedure in purchase orders.
Use
Customizing
Create a new condition type, ZWST, in Customizing for Materials Management (MM), by choosing Purchasing ® Conditions ® Define Price Determination Process ® Define Condition Types ® Define Condition Type.
To do so, copy condition type MWST and make the following settings:
Description: VAT Amount
Condition Class: D (Tax)
Calculation Type: A (Percentage)
Condition Category: D (Tax)
In the Changes Which Can Be Made group box, select the following checkboxes:
Item Condition
Delete
Amount/Percent
Value
Add the new condition type to the pricing procedure (in the standard system, RM0000), in Customizing for MM, by choosing Purchasing ® Conditions ® Define Price Determination Process ® Define Calculation Schema.
Create a new entry in the pricing procedure as follows:
Step: 36
Cntr (Counter): 0
CTyp (Condition Type): ZWST
Man. (Manual Entry): Select this indicator.
P (Print): S (printed in totals block)
Reqt.: 10
AltCty. (Condition Formula): 16

Error-- Condition type MWST tax code A0 does not exist

I have an Invoice and it didnu2019t pass for accounting entry.
The error is promptu201D Condition type MWST tax code A0 does not existu201D, It never came at the time of Sales order creation.
Diagonosis says the following
When calculating tax, the system tried to determine the condition amount and the condition number from tables A003 and A053 using the specified condition type and tax code. However, no values were found there.
Procedure says the following thing
Check the Customizing settings for the specified tax code. Check whether the validity period (possible with tax jurisdictions) is defined.
Please guide.

Christiano,
First let analyze the situation.
1. Execute Tcode VA02 --> Item Details --> Conditions tab --> Click Analysis button. Try to find for condition Type MWST whether values are flowing.
If it is not there then you have not maintained condition record.
2. Tax Code.
Execute FTXP Tcode , Check For A0 Tax code check whether you have maintained any value. if yes then check in condition record, whether you created record with Tax Code - A0
If everything above is perfect and correct
3. Check Copy Controls and Pricing type
Check the Validation period (it should not be the problem)
Check and Revert
Regards
Sathya
Edited by: Sathya Pavan Yedavalli venkata on Apr 21, 2009 2:06 PM

Down load MWST records to with the tax code as before

Hi All,
I need to make some changes to the MWST tables in respect of a VAT rate increase in Spain due on 1st July.
I would like to know how to down load MWST records to with the tax code as before?
Aditya

Hi Aditya
You should create a new tax code for the new VAT rate; you should not change the rate for the existing code. This is because you may need to post/correct transaction for the old rate after the change in rates.
Data is stored in T683S. Select where KALSM = your tax procedure, for Spain this will most likely be TAXES

Tax code BW does not appear in any G/L account item

Hi Gurus,
I have a requirement with Brazil client, they have got two types of taxes (PIS and COFINS) For which I created 2 tax codes BW & BX (with 100% & 100%). I created two tax conditoins ZPIS & ZCOF with access sequence MWST. I assigned tax codes to each one of those condition types.
I processed the entire cycle right from quotation to commercial invoice. But while releasing document for accounting in VF02, I am getting the above error. I have checked all configuration settings in SD and also in FI. But I could not found the solutions anywhere. I checked in all postings but thats also fruitless.
Could anyone of you have got this error and if you know the solution, then your response to this post will be high appreciated.
Thanks in advance.
Laks

Not sure why you have maintained 100% for both the tax codes. I am also not sure, where you have maintained this percent. Is it in FTXP ?? As you should be aware, all tax codes would be created in FTXP with respective tax percentage like 4% for one tax code and 12.50% for other tax code.
thanks
G. Lakshmipathi

Tax code O1 does not appear in any G/L account item

Hi Gurus,
I have a requirement with client, they have got two types of taxes (Adv Income Tax & Value Added Tax). For which I created 2 tax codes O1 & O2 (with 5% & 1.5%). I created two tax conditoins ZVAT & ZAIT with access sequence MWST. I assigned tax codes to each one of those condition types.
I processed the entire cycle right from quotation to commercial invoice. But while releasing document for accounting in VF02, I am getting the above error. I have checked all configuration settings in SD and also in FI. But I could not found the solutions anywhere. I checked in all postings but thats also fruitless.
Could anyone of you have got this error and if you know the solution, then your response to this post will be high appreciated.
Thanks in advance.
regards,
Kumar
Edited by: Mukesh Munigala on Jul 10, 2010 7:29 PM

Refer following link for understanding & solution:
Accounting document not posted from billing document SD module
Hopefully this can assist you.
Thanks & Regards
JP

Tax code Blank on Inter-company Accounting Document

The Tax code field in Intercompany Accounting Document is Blank though MWST has A0 ( Zero Tax) as tax code but PR00 & PI01 have no tax codes . The Accounting document of Commercial Invoice has tax code A2 which has MWST & PR00 with tax code A2 ( Full tax) & PI01 as Blank, even at the time of condition record creation for PR00 & PI01 there is no place to enter tax code as these I believe come from customer master record - tax classification. the customer record for Sales Org Ireland has been maintained as Tax exempt.
Sales Flow-
Irish Customer orders to Sales Org Ireland
Sales Org Ireland - has Plant UK as delivery plant- delivers goods to customer
Sales Org Ireland Invoices - Irish customer with correct tax code
Sales Org UK creates Intercompany Invoice to Sales org Ireland with blank tax code in accounting doc
IV Invoice creates RD04 with fullprocessed IDoc in Ireland which does correct Invoice verificiation posting in Ireland.
the only problem is when UK creates IV invoice the a/c document generates has tax code as blank where it should with A0 ( tax exempt) code.
Kindly help

Use SAP Note 10560 & 112609

Changing Tax Code in Sales Order

Hi All,
I've a requirement to change the tax code of MWST CT from normal value XX to a new tax code in sales order for few excpetion cases.
For normal cases the tax code will always be XX for MWST CT in the sales order. However for very specific business need the tax code for the existing sales order needs to be changed to a new value. The need for changing the tax code always arise after creating the sales order.
Kindly suggest the possible ways to meet this requirement.
Regards,
Ashish

Changing the tax code in the sales order is not std sp procedure and I don;t think sp allow tampering with it either.
The taxes are based on the combination for customer and material and I suggest that you maintain all tax codes at the material and customer level for all combinations possible and each customer is alloted one unique one.
What are the possible reason why tax changes. It can only be the delivery address is changed. If the material iself changes then you may have to modify the sales order itself but if there is a change in the ship to party then....
Now if the shipto party changes then you can always redetermine taxes in billing where the actual taxes will be redetermined based on the new conditions.
If you see the tax line item in the sales order you will see that it is greyed out.
You can change the excise duty but not taxes.
This is the default where the condition type is prohibited from changing manually. But if you change the setting to Free or manual then you can change the value of tax bu the tax code will be as determined by the combination of material and shipto.
regds
Jude
Edited by: jude xavier on Sep 7, 2008 8:23 PM
Edited by: jude xavier on Sep 7, 2008 8:24 PM

Is it possible to have more than one Tax code per line item in Billing docu

Is it possible to have more than one Tax code per line item in Billing document ?

Hi,
I have a different perspective there.
If an item is applicable for two different taxes which are represented by two different tax condition types and these tax conditions are configured in the tax procedure, FTXP and so on....then these two condition records can have two different tax codes.
We actually have this scenario in EU now, where EU talks about service tax in 2010 apart from the normal VAT. So now we have MWST and ZWST(Say)
Now there are some materials which come with a service associated with it. So a service charge is also levied when the material is sold. So the material price will become applicable for VAT and the service charge becomes applicable for service tax. In this case, the tax classification of the customer will have two entries in sales orders updated in the fields VBAK-TAXK1 and VBAK-TAXK2 based on the sequence number of these condition types.
Now based on different tax classification of the customer, we have 2 different tax codes representing different %of tax.
Hope it helps

Tax statement item missing for tax code O3

Hi experts,
I'm sorry about my question which can find out a lot in SDN forum, but i still post this here because my case is different, I see some similar Error, but I cant solve my issue.
In sales standard process, I do SO, DO, Bill without that error. but Just Free goods process.
I have a error in Free goods process
I create SO for Free goods and enter manual quantity and Item category
(I'm using R100 condition for free good)
Then create Delivery.
Then create Billing, save and get error:
Document 90000319 saved (no accounting document generated)
Message no. VF050
After that, I go to VF02, and click to Release flag, I get:
Tax statement item missing for tax code O3
Message no. FF805
Diagnosis
No tax item exists for tax code O3 in a G/L account item. A possible
cause is an incorrect transfer of parameters by the application to the
Accounting interface.
Procedure
Enter an OSS message.
I search in OSS note, but I cant solve it.
Please help me to solve this Error,
Many thanks

Hi,
In FS03, I see allowed output tax in tax account.
I get the reason of this error, but I dont know how to solve.
In my procedure, I have some condition type:
PR00 - price
R100 - 100% discount
MWST - Output tax
and, Z001: FEE (This amount must sent to Goverment, no tax, so I enter higher Step no. in procedure)
In case Free goods, in VF01 must: (example: Sent 1 material A (price 10) to customer for free, no tax, but Fee (1))
Dr: Customer account: 1
Dr: Sales deduce: 10
Cr: Sales revenue: 10
Cr: Fee: 1
But I cant post this transaction.
Can you give me a solution for this case?

Tax statement item missing for tax code O0 . ||Message no. FF805

Hi Gurus,
I am trying to post SD billing document to accounting. The system issues error message FF 805 - Tax statement item missing for tax code O0. Our Development and Production systems are working fine and we have this issue with the quality system.
The following TCODES are verified for the configuration in FI and SD.
FTXP, FS00, V/0K, V/08, VK13, MEK3, FB13, VK0A
We have gone through the checklist specified in the following threads.
Error : Tax statement item missing for tax code
FF805 Tax statement item missing for tax code
FF805 Tax statement item missing for tax code O0
Tax code error
Eror message FF805 when mwst based condition value is zero
As well as refered the following OSS notes and checked the configuration with the development/production systems, which seems to be exactly same.
Note 971253 - Causes for error message FF805 in SD
Note 112609 - How are tax codes transferred to conditions ?
Note 400766 - Changes in accounting interface for Release 4.6
Please let us know if we are missing anythig else.
Thanks,
Veeru.

Issue resolved, Ultimately there was some user-exit missing.
Thanks,
Veeru.

Sd: TAX CODE MWST

Similar Messages

Maybe you are looking for