Search Help Event

Hi,
I have a table that shows countries.
Under it I have an input field with search help.
What I want to do is to put the country selected in the search help automatically into the table .
To achieve this I have tried using a calculated field, but what happens is that the selected value gets into the table only
after an another event,  such as selecting the search button again, is called.
Does anyone know how to cause the selected value to be written to the current table element?
Thanks and regards
yuval

Hello Peery,
what is the input help you are using? either EVS/OVS?
Regards
Nizamudeen SM

Similar Messages

  • How to provide search help for input field

    Hi Experts,
    I have a field WBS elements on my selection screen view1 .  I need to provide search help for that.
    Can anyone please help how to proceed with that?
    Regards,
    Chitrasen

    hi ,
    pls refer this WIKI on SDN :
    http://wiki.sdn.sap.com/wiki/display/WDABAP/UsingSearchhelpattachmentsforWebDynproABAP
    refer this online SAP help :
    http://help.sap.com/saphelp_nwmobile71/helpdata/en/3d/e53642e2a3ab04e10000000a1550b0/content.htm
    also go thru this thhread :
    Re: search help event
    regards,
    amit

  • Further action after leaving search help without event "onEnter"

    Hi,
    I created an iView with an input field to select an employee with search help PREM. Everything works well, so I can search by several match codes.
    And here's my problem: I need the name of the employee in an output field of my iView whenever I select a result of the search help without pressing the enter key (just to make the user sure to use the right employee).
    Is there the possibility to call a customer function and afterwards to bind the element? Ok, I think I need an interaction – but how can I do this without the event onEnter? I just want to select an employee with the search help and -when returning back- displaying his name.
    We substituted an html-application with this iView. The html-appl used a piece of java script in which we used the "on blur"-function, so when we left the input field we called a function to select the employee's name. This way was fine...
    Ok folks, who has an idea/solution?!
    Steffen

    hi steff........
               what you can do is... instead of a standard search help, you can use ovs... so in the coding part you can fill other details too with respect to the selected value... or
            try filling the output field  in the wddomodify method.
    ---regards,
       alex b justin

  • How to call elem. Search help on Button click event in WD appilcation

    Hello All,
    i have requirement to call elem. search help on button click event in WD application. currently i am calling FM  F4IF_START_VALUE_REQUEST but getting the short dump as below,
    The following error text was processed in the system X31 : Screen output without connection to user.
    The error occurred on the application server saps_X31_31 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    SYSTEM-EXIT of program SAPLSDH4
    Function: F4_PRESEL_WITH_TABSTRIP of program SAPLSDH4
    Form: F4PROZ_STEP_PRESEL of program SAPLSDSD
    Function: DD_SHLP_SINGLE_STEP of program SAPLSDSD
    Form: F4PROZ_LOOP of program SAPLSDSD
    Form: F4PROZ of program SAPLSDSD
    Function: F4IF_START_VALUE_REQUEST of program SAPLSDHI
    Method: ONACTIONSEARCH_CUSTOMER of program /1BCWDY/50TU5ZEXF3K0IWCWE153==CP
    Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/50TU5ZEXF3K0IWCWE153==CP
    Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
    is there any way to achieve the required behaviour.
    please let me know.
    Regards,
    Chandra

    Hi Friends,
    I have the similar kind of requirement. Upon click on a Button on screen i need to call a search help, and collect one or more selected material numbers.
    The search help is working fine and i am getting the entries with the following code.
    The problem is i am finding extra popup on screen.
    CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
    EXPORTING
    tabname         =  space
    fieldname       =  space
    SEARCHHELP      =  'MAT1'
    MULTIPLE_CHOICE =  'X'
    STEPL           =  0
    value           = 'MATNR'
    *dynpprog        =  progname
    *dynpnr          =  dynnum
    *dynprofield     = 'CARRIER'
    CALLBACK_PROGRAM          = 'ZTEST_1_PRA'
    CALLBACK_FORM             = 'F4CALLBACK'
    TABLES
    RETURN_TAB                = RETURN_TAB
    EXCEPTIONS
    FIELD_NOT_FOUND           = 1
    NO_HELP_FOR_FIELD         = 2
    INCONSISTENT_HELP         = 3
    NO_VALUES_FOUND           = 4
    OTHERS                    = 5.

  • Event Handling for free programmed search help bond dynamically in SO

    Dear Expert,
    I met a problem of how to handle an event raised by a free programmed search help - (F4), and this F4 is invoked
    by a field defined in a Selection Option component (WDR_SELECT_OPTIONS) - SO. 
    The scenario is that I would like to update the SO after the user multiple select some entries in the F4. I could tranfer
    back all the value chosen in the F4 to the consumer SO, but I can not update the icon in the SO(e.g  in SO, multiple values will be
    displayed with a green arrow icon), because I could not define a handler in SAP standard component SO, and it looks like there is no chance to catch the event triggered at the end of selection in F4.  (this event belonged to this F4)
    Welcome any suggestions or ideas, Thanks very very much. 
    In Addition, I use this way to enable the F4 for SO
    lo_so_component->create_cmp_usage_group(
         name = 'F4_TRANSPORT'
         used_component = 'ZTRANSPORT').

    thanks all

  • Eventing on dictionary search help on date field

    Hi Experts,
    In my WDABAP application I have a Date input field. I have used dictionary search help into this field to display calender searc help.
    Now on select of the date from the calender I want to trigger one event which will enable some other fields in the application.
    Can you please tell me how to implement this on select event of the date.
    Thanks
    Sonia.

    Hi,
      Since you are using an Input Field , only event possible is "On Enter" event.This event is triggered when  "enter" key is pressed by the user after selecting a value in the input field.So may be you can use this and proceed further.
    Although it may not serve you the actual requirement that you have to achieve , because input field does not have any event for "On select".
    [On Enter|http://help.sap.com/erp2005_ehp_04/helpdata/EN/14/0ce74114a1da6fe10000000a1550b0/frameset.htm] this link might help
    Cheers,
    Aditya.

  • Event handler on search help PREM how to?

    Hello!
    I'm new to webdynpro and did already some basic tutorials.
    One thing which isn't covered there i want to know...
    I have for example to attributes.
    PERSNO and ENAME.
    On Perso i have the basic search help PREM
    In my webdynpro i have these 2 Input fields. Now i need an event which fills the ENAME, after i selected a PERNR via the search help.
    How can i handle these events?
    greets thomas

    Hi
    see standard component WDR_TEST_OVS
    this link will be helpful
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/wdabap/abap%2bwd%2bobject%2bvalue%2bselector(OVS)
    Abhi

  • Dictionary Search Help - how to trigger an event after F4 help

    Hi,
    I been searching the web lately to find a way to trigger an event after using the F4 input help.
    Here is an example of what I would like to do:
    - I have a WD form with a inputfield in it.
    - The input field is bound to datalement "LIFNR".
    - In my context I have specified the Input Help Mode to "Dictionary Search Help"
    - And the Dictionay Search Help is set to "KRED"
    A user will the click on F4 to start the Search help, then pick a LIFNR and the WD inputfield wil be filled.
    What I want is to trigger an event when this is happening.
    Does anyone have som tips or guides for me regarding this problem?
    Thanks in advance! =)

    Hi Mathias Hagen
    Actually there is no straight way of doing this , but still you can trigger a event in F4 search help ...  below is very informative blog to trigger the F4 search help by chris
    Firing a WDA event on using a Search Help - how to do it, without an NDA
    regards
    Chinnaiya P

  • How to triger a event when select search help

    code like this
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS: pa_werks LIKE t001w-werks.
    SELECTION-SCREEN COMMENT 20(10) g_werks.
    SELECTION-SCREEN END OF LINE.
    AT SELECTION-SCREEN ON pa_werks.
      g_werks = pa_werks.
    I want when select search help ,g_werk changed,but now  only press enter g_werks will be change
    how can I do ? when select a value from search help  g_werks change

    Hi,
    Use something like this:-
    PARAMETERS : p_werks TYPE t001w-werks.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_werks.
      PERFORM get_f4_help.
    *&      Form  GET_F4_HELP
    *      -->P_WERKS  text
      "populate an internal table with all possible values to be displyed
      "Use FM F4IF_INT_TABLE_VALUE_REQUEST
    Hope this helps you.
    Regards,
    Tarun

  • Search help - On Change event in delivery order process transaction

    Hello to all,
    The functional guys want to have an abap code written in the delivery order transaction VL02N in the item detail of an item. We have to call a transaction when a particular value is selected in the search help of the field, 'Mat Freight Group' in the 'Loading & Shipment' tab  in the Item Details screen. How do i proceed with this requirement ?
    Thanks
    Shehryar Dahar

    Hi
    Check the following enhancements/user exits for the delivery transaction and use the related one for your purpose
    V02V0001
    V02V0002
    V02V0003
    V02V0004
    V50PSTAT
    V50Q0001
    V50R0001
    V50R0002
    V50R0004
    V50S0001
    V53C0001
    V53C0002
    V53W0001
    VMDE0001
    VMDE0002
    VMDE0003
    VMDE0004
    Reward points for useful Answers
    Regards
    Anji

  • Search help is not triggering second time in interactive form

    Hi,
    I have online interactive form in WDABAP. And I have few search helps in the form, If i click on any search help it is opening and I can select the value and the same is populated to the field. But if i click it again search help is not opening.
    Only one time it is triggering and also after I clicked one serach help, other search helps also dont work.
    Can some one guide me? Is it something to do with scripting or any other configuration?
    Now Im using ALD7.1 and Reader version is 8.1.0.
    did any one faced this problem? Really appreciate if some one can help me on this.
    Regards,
    Ravi

    hi,
    The following code is generated in the preopen event of the valuehelp.
    // DO NOT MODIFY THE CODE BEYOND THIS POINT - 710.20061129084151.349066.349066 - ValueHelpDropDown.xfo
                       var processingValueHelp = ContainerFoundation_JS.getGlobalValue(event.target, "processingValueHelp");
                       if(processingValueHelp == false) {
                           ContainerFoundation_JS.setGlobalValue(event.target, "processingValueHelp", true);
                           this.rawValue = "";
                           this.clearItems();
                           ContainerFoundation_JS.SendMessageToContainer(event.target,
                                                                         "valueHelp",
                                                                         this.dataNode.somExpression.replace(/(xfa.?\.)(datasets.?\.)(data.*?\.)/, ""),
                                                                         this.rawValue,
                                                                         event.target.mouseX,
                                                                      event.target.mouseY);
                       // END OF DO NOT MODIFY
    I have tried placing this code in click event instead of preopen.But still no use. Can we make changes to this code? Can some one give me some idea what changes need to be done..
    Regards,
    Ravi

  • Issue with Search Help Creation

    Hi All,
    I need to display the match code for the Z table ZPRODUCT and the field is PRODH. The data should be retrieved from the table T179 by filtering PRODH = 'ZZ*' and STUFE = '1'. So, I am trying to create a Search Help for this requirement. But, the field ZPRODUCT-PRODH is of 5 Characters length and the field T179-PRODH is of 18 characters length. As the lengths are not matching, it is not allowing me to create the Search help. Could someone tell me if there is any way to overcome this issue?
    Or is there any better approach to create the match code apart from the Search Help. Can we use the Table events for this requirements? Please share your thoughts.
    Thanks a lot in advance.
    Regards,
    Paddu.

    Did you check the screen field names & search help name? is it identical & unique?
    Raja T

  • About Running Remote Search Helps in SRM via Webdynpro ABAP

    Hi there,
    I am having troubles trying to implement an input help for a custom field in the standard Shopping Cart Portal page for item level.
    I would like to implement the same input help used in field Network of Activities, but as I can see in WDA component '/SAPSRM/WDC_UI_DO_ACC', it seems to use another component in order to run a remote Search Help (I assume it is an original search help from PS system).
    Does anybody know how to use this backend search help WDA Component? (/SAPSRM/WDC_UI_BACKEND_SH)
    I haven´t found any information regarding that :S.
    Another option would be to create a new RFC FM in PS returning the expected values, and use these entries to build a list value selector associated to the corresponding context attribute (This is not what I would like...)
    Thanks in advance!

    Vicente Ángel Lopez Romero wrote:
    > Hi there,
    >
    > I am having troubles trying to implement an input help for a custom field in the standard Shopping Cart Portal page for item level.
    >
    > I would like to implement the same input help used in field Network of Activities, but as I can see in WDA component '/SAPSRM/WDC_UI_DO_ACC', it seems to use another component in order to run a remote Search Help (I assume it is an original search help from PS system).
    >
    > Does anybody know how to use this backend search help WDA Component? (/SAPSRM/WDC_UI_BACKEND_SH)
    >
    > I haven´t found any information regarding that :S.
    >
    >
    > Another option would be to create a new RFC FM in PS returning the expected values, and use these entries to build a list value selector associated to the corresponding context attribute (This is not what I would like...)
    >
    > Thanks in advance!
    Figured it out.
    /SAPSRM/WDC_UI_BACKEND_SH is a 'freely programmed' search help used in SRM.
    1. Add this helpview (HV) component usage to your component controller, and view controller.
    2. Map HV SELECTION context to your view
    3. Modify the context attribute you want backend searchhelp to 'freely programmed', and select the component usage created in step above (note this is done dynamically in SAP code, b/c attribute is defined as dictionary search help in SAP components) -- this took a bit to figure out.
    4. IMPORTANT: Give your context attributes the SAME NAME (COST_CTR in my case) as those in structure /SAPSRM/S_CH_WD_MAP_ACC (how obvious was that)
    5. IMPORTANT: Set your LOGSYS in /SAPSRM/CL_PDO_VALHELP_FACTORY class - love those those factories (tic)
    DATA: lo_helper TYPE REF TO /SAPSRM/IF_PDO_ACCT_ASSGT_HLPR,
    CALL METHOD /SAPSRM/CL_PDO_VALHELP_FACTORY=>GET_ACCT_ASSGT_HELPER
    RECEIVING
    RO_ACC_ASSGT_HELPER = lo_helper.
    CALL METHOD lo_helper->set_searchhelp_control
    EXPORTING
    iv_logsys = ls_logsys-logsys.
    6. Now handle event DATA_SELECTED to get data from SELECTION, and move to your Context field.
    How simple was that? Yikes. I should have just built a custom dictionary search help to RFC over and call the BAPI for Cost Center List.
    - Tim

  • Need some help in creating Search Help for standard screen/field

    I need some help in adding a search-help to a standard screen-field.
    Transaction Code - PP01,
    Plan Version - Current Plan (PLVAR = '01'),
    Object Type - Position ( OTYPE = 'S'),
    Click on Infotype Name - Object ( Infotype 1000) and Create.
    I need to add search help to fields Object Abbr (P1000-SHORT) / Object Name (P1000-STEXT).
    I want to create one custom table with fields, Position Abb, Position Name, Job. Position Abb should be Primary Key. And when object type is Position (S), I should be able to press F4 for Object Abb/Object Name fields and should return Position Abbr and Position Name.
    I specify again, I have to add a new search help to standard screen/field and not to enhance it.
    This is HR specific transaction. If someone has done similar thing with some other transation, please let me know.
    There is no existing search help for these fields. If sm1 ever tried or has an idea how to add new search help to a standard screen/field.
    It's urgent.
    Thanks in advace. Suitable answers will be rewarded

    Hi Pradeep,
    Please have a look into the below site which might be useful
    Enhancing a Standard Search Help
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/daeda0d7-0701-0010-8caa-
    edc983384237
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee93446011d189700000e8322d00/frameset.htm
    A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
    This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
    A search help exit is called at certain timepoints in the input help process.
    Note: The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
    Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
    During the input help process, a number of timepoints are defined that each define the beginning of an important operation of the input help process.
    If the input help process is defined with a search help having a search help exit, this search help exit is called at each of these timepoints. If required, the search help exit can also influence the process and even determine that the process should be continued at a different timepoint.
    timepoints
    The following timepoints are defined:
    1. SELONE
    Call before selecting an elementary search help. The possible elementary search helps are already in SHLP_TAB. This timepoint can be used in a search help exit of a collective search help to restrict the selection possibilities for the elementary search helps.
    Entries that are deleted from SHLP_TAB in this step are not offered in the elementary search help selection. If there is only one entry remaining in SHLP_TAB, the dialog box for selecting elementary search helps is skipped. You may not change the next timepoint.
    The timepoint is not accessed again if another elementary search help is to be selected during the dialog.
    2. PRESEL1
    After selecting an elementary search help. Table INTERFACE has not yet been copied to table SELOPT at this timepoint in the definition of the search help (type SHLP_DESCR_T). This means that you can still influence the attachment of the search help to the screen here. (Table INTERFACE contains the information about how the search help parameters are related to the screen fields).
    3. PRESEL
    Before sending the dialog box for restricting values. This timepoint is suitable for predefining the value restriction or for completely suppressing or copying the dialog.
    4. SELECT
    Before selecting the values. If you do not want the default selection, you should copy this timepoint with a search help exit. DISP should be set as the next timepoint.
    5. DISP
    Before displaying the hit list. This timepoint is suitable for restricting the values to be displayed, e.g. depending on authorizations.
    6. RETURN (usually as return value for the next timepoint)
    The RETURN timepoint should be returned as the next step if a single hit was selected in a search help exit.
    It can make sense to change the F4 flow at this timepoint if control of the process sequence of the Transaction should depend on the selected value (typical example: setting SET/GET parameters). However, you should note that the process will then depend on whether a value was entered manually or with an input help.
    7. RETTOP
    You only go to this timepoint if the input help is controlled by a collective search help. It directly follows the timepoint RETURN. The search help exit of the collective search help, however, is called at timepoint RETTOP.
    8. EXIT (only for return as next timepoint)
    The EXIT timepoint should be returned as the next step if the user had the opportunity to terminate the dialog within the search help exit.
    9. CREATE
    The CREATE timepoint is only accessed if the user selects the function "Create new values". This function is only available if field CUSTTAB of the control string CALLCONTROL was given a value not equal to SPACE earlier on.
    The name of the (customizing) table to be maintained is normally entered there. The next step returned after CREATE should be SELECT so that the newly entered value can be selected and then displayed.
    10. APP1, APP2, APP3
    If further pushbuttons are introduced in the hit list with function module F4UT_LIST_EXIT, these timepoints are introduced. They are accessed when the user presses the corresponding pushbutton.
    Note: If the F4 help is controlled by a collective search help, the search help exit of the collective search help is called at timepoints SELONE and RETTOP. (RETTOP only if the user selects a value.) At all other timepoints the search help exit of the selected elementary search help is called.
    If the F4 help is controlled by an elementary search help, timepoint RETTOP is not executed. The search help exit of the elementary search help is called at timepoint SELONE (at the
    F4IF_SHLP_EXIT_EXAMPLE
    This module has been created as an example for the interface and design of Search help exits in Search help.
    All the interface parameters defined here are mandatory for a function module to be used as a search help exit, because the calling program does not know which parameters are actually used internally.
    A search help exit is called repeatedly in connection with several
    events during the F4 process. The relevant step of the process is passed on in the CALLCONTROL step. If the module is intended to perform only a few modifications before the step, CALLCONTROL-STEP should remain unchanged.
    However, if the step is performed completely by the module, the following step must be returned in CALLCONTROL-STEP.
    The module must react with an immediate EXIT to all steps that it does not know or does not want to handle.
    Hope this info will help you.
    ***Reward points if found useful
    Regards,
    Naresh

  • Search help for a particular value

    Hi ABAP gurus,
    Suppose i have 2 fields in Selection-screen i.e Plant and Material, Plant have 3 values say 1000,2000,3000.Whenever user enter 1000 and Press f4 in Material field then all the material values related to plant 1000 should be displayed,Similarly with value 2000 & 3000.
    Thanks in advance
    Sumit Kumar Sharma

    hi sumit.
    in report if you want search help based on another selection screen field value then you need to one function module to capture selection screen field value. i.e DYNP_VALUES_READ.
    the following is the example program please go though for this no need of enter.
    *Structure declaration
    TYPES: BEGIN OF ty_posnr,
           vbeln TYPE vbeln,
           posnr TYPE vbap-posnr,
           END OF ty_posnr.
    *internal table creatioin
    DATA:t_posnr TYPE STANDARD TABLE OF ty_posnr INITIAL SIZE 0.
    DATA: t_dyn TYPE TABLE OF dynpread,
          w_dyn TYPE dynpread.
    DATA: g_vbeln TYPE likp-vbeln,
          g_posnr LIKE vbap-posnr.
    *Selection screen
    SELECTION-SCREEN BEGIN OF BLOCK b1.
    SELECT-OPTIONS: s_vbeln FOR g_vbeln NO INTERVALS NO-EXTENSION ,
    s_posnr FOR g_posnr NO INTERVALS NO-EXTENSION .
    SELECTION-SCREEN END OF BLOCK b1.
    *At selection screen on event
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_posnr-low.
      PERFORM f4_help.
    *&      Form  f4_help
    *       text
    FORM f4_help .
      w_dyn-fieldname = 'S_VBELN-LOW'.
      APPEND w_dyn TO t_dyn.
      CALL FUNCTION 'DYNP_VALUES_READ'
         EXPORTING
           dyname                               = sy-repid
           dynumb                               = '1000'
    *   translate_to_upper                   = 'X'
    *   REQUEST                              = ' '
    *   PERFORM_CONVERSION_EXITS             = 'X'
    *   PERFORM_INPUT_CONVERSION             = 'X'
    *   DETERMINE_LOOP_INDEX                 = ' '
    *   START_SEARCH_IN_CURRENT_SCREEN       = ' '
    *   START_SEARCH_IN_MAIN_SCREEN          = ' '
    *   START_SEARCH_IN_STACKED_SCREEN       = ' '
    *   START_SEARCH_ON_SCR_STACKPOS         = ' '
    *   SEARCH_OWN_SUBSCREENS_FIRST          = ' '
    *   SEARCHPATH_OF_SUBSCREEN_AREAS        = ' '
         TABLES
           dynpfields                           = t_dyn
    EXCEPTIONS
       invalid_abapworkarea                 = 1
       invalid_dynprofield                  = 2
       invalid_dynproname                   = 3
       invalid_dynpronummer                 = 4
       invalid_request                      = 5
       no_fielddescription                  = 6
       invalid_parameter                    = 7
       undefind_error                       = 8
       double_conversion                    = 9
       stepl_not_found                      = 10
       OTHERS                               = 11
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      CLEAR w_dyn.
      READ TABLE t_dyn INTO w_dyn WITH KEY fieldname = 'S_VBELN-LOW' .
      IF sy-subrc = 0.
        SELECT vbeln
               posnr
               FROM vbap
               INTO TABLE t_posnr
               WHERE vbeln = w_dyn-fieldvalue.
      ENDIF.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
    *            DDIC_STRUCTURE         = ' '
                retfield               = 'POSNR'
    *            pvalkey                = ''
                dynpprog               = sy-repid
                dynpnr                 = '1000'
                dynprofield            = 'S_POSNR-LOW'
    *            STEPL                  = 0
    *            WINDOW_TITLE           =
    *            VALUE                  = ' '
                value_org              = 'S'
    *            MULTIPLE_CHOICE        = ' '
    *            DISPLAY                = ' '
    *            CALLBACK_PROGRAM       = ' '
    *            CALLBACK_FORM          = ' '
    *            MARK_TAB               =
    *          IMPORTING
    *            USER_RESET             =
        TABLES
          value_tab              = t_posnr
    *            FIELD_TAB              =
    *            RETURN_TAB             =
    *            DYNPFLD_MAPPING        =
    *          EXCEPTIONS
    *            PARAMETER_ERROR        = 1
    *            NO_VALUES_FOUND        = 2
    *            OTHERS                 = 3
      IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                                                    " f4_help
    It will work fine. If you satisfied give points.
    regards.
    laxman

Maybe you are looking for