Search help for Acct Assignment not working

Hi,
When I create a PO and go into the account assignment tab at the item level and try to bring up the search help by clicking on the Binoculars , nothing happens. The backend has been upgraded to ERP2005. We are on SRM 5.0
Any thoughts on why this could happen?
Can you shed some light on how I could investigate this issue.
Your help is appreciated.
Joe

Hi
This is a bug in the System. Are you talking of customer fields / standard fields - search help ?
You need to raise an OSS message with SAP on this.
Meanwhile, try these SAP OSS notes.
Note 739509 BBPPO01: SEARCH FOR ACCOUNT ASSIGNMENT CATEGORY DOESN'T WORK
Note 746788 - Back-end system search help for cost center
Note 656633 - Search help requires dialog users
Note 907016 - Error when you select search help
Also ensure, proper authorization objects are provided by BASIS team.
Let me know incase you need any assistance.
Regards
- Atul

Similar Messages

F4 help for 0MAT_SALES is not working in BI 7

Hi Gurus,
The F4 help for 0MAT_SALES is not working when distibution channel is selected as (!=02) in Bex Analyzer. But for all other values for distibution channel i am getting values in F4 help.
Since 02 is excluded it is supposed to give values for all other combination. but it not so.
Could anyone of you please help me on this?
Thanks in advance.

Closing Thread

Search Help for Vendor Feild not getting populated in the Screen Element

Hi Everyone,
In transaction Miro, I get a POP-UP for Invoicing Party i.e. Vendor and Users required a custom search help.
The Search help for Vendor(LIFNR) is KRED_C and i appended a Z search help under this.
Now that the search help exists and I can drill down the values too but when i select/choose any value, that value is not getting populated in Screen feild.
is there any validation I need to do for this.
Please suggest me... I checked SDN there are many things but i couldn't figure out wat i need to do and where I need to modify.
Regards,
Raj

Dear Hema,
Could you please tell me how many internal tables you are using to store the data for display.
I observerd that you have lt_stock and lt_mat2 declared in the part of the program
>DATA: lv_stock TYPE lty_stock.
>DATA: ltmat2 TYPE TABLE OF lty_mat.
you have displayed above, however you are also using ls_stock and lv_stock .
>IF p_ztotal = ' '. "line
>WRITE 18 ls_stock-matnr.
>WRITE 38 lv_stock-strgr.
>
>ELSEIF ztotal = 'S'.                             "subtotal
    >WRITE: 15 ls_stock-nrmit.
    >WRITE 32 lv_stock-dispo.
    >WRITE 43 lv_stock-fevor.
>ELSE.                                            "total
    >WRITE: 15 'TOTAL'(016), ls_stock-prgrp.
>
>ENDIF.
Are those for displaying some other information?
Also the problem of display you are facing can also be because there are no records to be displayed which satisfies the selection criteria.
Best Regards,
Rajesh.
Please reward points if found helpful.

Search help of material is not working in ECC 6.0 : Urgent

Hi Friends,
I am using ECC 6.0. I have a problem in search help of material by plant. In the search help of material (choosing the tab plant material by descriptions), if i give any plant which is 3 chars long (exp. ABC) it is giving correct combination of plant material. But if i am giving a plant which is 4 chars long (exp ABCD) it firing a message saying no values found, although the combination exist. (if i am giving only material name it is showing both 3 chars and 4 chars long plant).
for ref: please use transaction MD04 and press f4 in material field and choose tab "plant material by descriptions", and give 3 chars and 4 chars long plant.
please help me to trace the problem or any OSS note.
correct answer will be awarded.
I will appreciate to not giving code of search helps because it is a standard SAP functionality that is not working.
Regards
Krishnendu

Krishnendu,
Please check your SAPGui frontend i think you are using 7.10 patch level 3.? if not try with some other system that have 7.10 patch level 3.
a®

Help for date field not working after upgrade

hi experts,
In our BSP application for a page we had an inputfield (date).
Onvaluehelp for input field we were calling the saphelpdate function.
however after upgrade this functionality is not working properly as no pop up comes after clicking on the icon.
we have upgraded to SPS 16 recently.
please help me.
regards,
Arvind.

Hi, I try upper case but nothing happen. This is all my code by far, I hope you can help me:
DATA: BEGIN OF T_PCONT OCCURS 0,
      PCONT LIKE ZPSPERMISOS-PSOBKEY,
END OF T_PCONT.
DATA: BEGIN OF T_FIELDS OCCURS 0.
        INCLUDE STRUCTURE help_value.
DATA END OF T_FIELDS.
DATA: BEGIN OF T_VALUES OCCURS 0,
      VALUE(60) TYPE c.
DATA: END OF T_VALUES.
DATA: N TYPE i.
SELECTION-SCREEN BEGIN OF BLOCK b20 WITH FRAME TITLE text-b02.
SELECT-OPTIONS:
    P_CONT FOR ZPSPERMISOSH-PSOBKEY OBLIGATORY NO-EXTENSION NO INTERVALS,
    P_INT FOR ZPSPERMISOSH-PARTNER OBLIGATORY NO-EXTENSION NO INTERVALS,
    P_FEC FOR ZPSPERMISOSH-ZFINICN NO-EXTENSION NO INTERVALS,
    P_RAZ FOR ZPSPERMISOSH-ZRAZONFINIC NO-EXTENSION NO INTERVALS.
SELECTION-SCREEN END OF BLOCK b20.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_CONT-LOW.
PERFORM P_HELP_P_CONT USING P_CONT-LOW.
*&      Form P_HELP_P_CONT
FORM P_HELP_P_CONT USING P_P_CONT.
DESCRIBE TABLE T_PCONT LINES N.
IF N EQ 0.
    T_FIELDS-FIELDNAME = 'PSOBKEY'.
    T_FIELDS-TABNAME    = 'ZPSPERMISOS'.
    T_FIELDS-SELECTFLAG = 'X'.
    APPEND T_FIELDS.
    CLEAR T_FIELDS.
    SELECT PSOBKEY FROM ZPSPERMISOS
    INTO TABLE T_PCONT.
    SORT T_PCONT BY PCONT.
CALL FUNCTION 'HELP_VALUES_GET_WITH_TABLE'
    EXPORTING
      CUCOL        = 10
      CUROW        = 1
      TABNAME      = 'T_PCONT'
      FIELDNAME    = 'PCONT'
    IMPORTING
      SELECT_VALUE = P_P_CONT
    TABLES
      FIELDS       = T_FIELDS
      VALUETAB     = T_VALUES.
ENDFORM.                    " P_HELP_P_CONT
Edited by: J. Garibaldi on Nov 25, 2009 11:14 AM
Edited by: J. Garibaldi on Nov 25, 2009 11:16 AM

Thread: Predefined Search Help for WERKS doesn't work properly

Hi
I read the above thread which partially helped solve my problem.
I would like to include werks-low and werks-high on the input screen both with search help and also allow user to input multiple selection if needed.
All help welcome
Torben

Hi
Many thanks for your help. This is my first dialog program so still learning.
I choose method 1 from you link but still can't get it to work.
My code in top program.
SELECTION-SCREEN BEGIN OF SCREEN 0110 AS SUBSCREEN.
select-options s_werks for t001w-werks.
SELECTION-SCREEN END OF SCREEN 0110.
my screen 0100 flow logic.
process before output.
module status_0100.
CALL subscreen sub1 INCLUDING SAPMZINFO2 0110.
process after input.
module okcode.
module user_command_0100 at exit-command.
field : m_lifnr module m_check_0100.
CALL subscreen sub1.
module read_data.
module user_command_0100.
All activates ok.
But when I execute program I don't see the subscreen and get the following error.
Call Subscreen: SAPMZINFO2 0100 NO DYNPRO NAME
What am I doing wrong?
Regards
Torben

F4 search help on ECP does not work

Hello experts,
Using a WBS with ECP and displaying the cost amounts, the F4 search help on 'Base unit of Measure' does not work. Please let me know if anybody has encountered this before and if so whether it is a SAP error or whether there is some setting which has not been configured correctly.
Any help would be appreciated
regards

Same here

Predefined Search Help for WERKS doesn't work properly

Hi Experts,
in my dynprofield I have a field called 'gf_werks'.
In Screen painter I manually added predefined search help H_T001W_T.
If I push F4 on gf_werks search help pops up.
But if I select one entry it transports the name of selected werks. But I need werks itself not its name...
What I'm doing wrong?
Regards,
Zaya

Good morning,
Sriniras, thank you very much!
I tried ur suggestion and it solved my problem. Now I'm getting werks not its name
Best Regards,
Zaya

Problems with search help for cost assignment

We have recently applied SP 10 to our Dev and QA systems. We have our system set up in such a way that when the user clicks on the binoculars for cost assignments and does a search, they will only see the accounts they are authorized to use (coming from the backend security). This works just fine in Production (without SP10).
But, depending on the test user, I am getting mixed results in our QA system. I have already sent a message to OSS but am hoping someone in this forum can point me in the right direction.
I have searched the forum and found several topics on this issue. But, I was not able to find something that is the same as my problem.
For my test users, they click on the binoculars then click Start. One test user was brought back to the shopping cart without any results. Another test user was given several entries. But, they did not belong to that user.
Can someone please point me in the right direction to get the binoculars working correctly?

Hello,
For First::
In general the CO Area (here: cost center) is derived from R/3 Backend Enterprise
Structure and should be re-determined if another acc. objects is
entered that belongs to a different CO Area. Please also check the
settings in R/3 Backend IMG, path:
->Enterprise Structure ->Assignment ->Controlling
->Assign company code to controlling area
The company code is assigned to the CO Area through the following
assignment:
->Materials Management
->Assign purchasing organization to company code
The CO Area is in general the organizational object in
highest (CO) level. Assignments to other MM/CO objects are located
in lower Enterprise hierarchy level. Hence, the CO Area does not
change if a different CO object of a lower level (here: cost center)
is assigned to a SRM document.
For Second::
The only possibility I see is to set the message to error message in
the customizing in the backend. The message number is KI 170. When you
look at the long text of this message in transaction SE91 in the
backend, you will find the description where to look in the customizing.
When you have set this message to ERROR, then no purchase order will be
created in the backend. Instead the shopping basket gets the status
'ERROR' and the administrator will recieve a work item in his inbox.
Then he can check the backend and either post the purchase orders again
after solving the problem, or he can delete the shopping baskets.
Please check the note for more infos or the documentation.
Setting the message KI 170 to error message will solve your problem.
See note 333136. I would think that if you create
a PO directly in the backend if you do not have the message configured
as and error you will be able to create the PO.
I hope this information helps.
Kind regards,
Gaurav

Search option for a variable not working in BEX

Hi Experts,
I have a variable on selection screen "Sold to". I am not able to do a search on this for "texts". For keys i am able to do. Is there any reason? Please suggest.
Thanks & Regards,
Vijaya

Hi Vijaya,
Check in BEx tab of sold to..which text(short, medium, long) are you using in BEx.
Check if the selected format of text is loaded in Sold to text master data table...
Check if you have created characteristic value variable...
Hope it helps,
Best regards,
Sunmit.

The Help Tab (OSX ML) where you search for something does not work

If I click "Help" and then search "expand" it will show me where expand is. But in CS6 when I clicked it the command would go through and pull up the page to expand pixels. Instead, I have to go find it. It works in every other Adobe app I use except Photoshop CC.
I am on the latest version and on CC

Hi Peter
Thanks a lot for your help (and sorry for not having answered quicker, but my boss gave me a more urgent task last week...).
Anyway, I did what you suggested (re-importing into a brand new project), and then the search for synonyms really worked! But, being a sceptical person, I did the same with another project, and with that one, it did not work. So, what I did next was compare all the settings of these two projects, and I found a difference.
RH8 now contains a function that's called 'Teilzeichenfolgensuche' (I don't know the English expression, but have a look at the attached picture: this is a screen shot from the second page when I generate WebHelp). After having done several tests, I came to the following conclusions:
Search for synonyms does not work in HTML-Help, but it does work in WebHelp (and maybe others, but they are not relevant for me, so I did not test them);
Search for synonyms does only work, when the function 'Teilzeichenfolgensuche' is NOT activated.
Could maybe somebody test this, too, and post here whether my conclusions are really correct?
Btw: This fact is not mentioned in the RH-Manual; actually, this function 'Teilzeichenfolgensuche' is not even mentioned there (at least not in the German edition)!!!
Can hardly wait to see your feedback; thanks again for everybody's support!
Kurt

Search help for SKAT-SAKNR OR SKAT-SAKNR is not working

Hi All,
I have created a Search Help for F4 in a dialog program for SKAT-SAKNR OR SKAT-SAKNR. While i click F4 on that field, it displays blank values.
Here is the module:
module HELP_FOR_SAPGL_ACC input.
CLEAR t_SAPGL.
SELECT SAKNR TXT20
 FROM SKAT
 INTO CORRESPONDING FIELDS OF TABLE t_SAPGL UP TO 1000 ROWS
 WHERE SPRAS = SY-LANGU.
 WHERE L_GL_ACC = v_FIELD_VALUE-FIELDVALUE.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 DDIC_STRUCTURE = ' '
 RETFIELD = 'SAKNR'
 PVALKEY = ' '
 DYNPPROG = PROGNAME
 DYNPNR = DYNNUM
 DYNPROFIELD = 'SKA1-SKANR'
 STEPL = 0
 WINDOW_TITLE =
 VALUE = ' '
 VALUE_ORG = 'S'
 MULTIPLE_CHOICE = ' '
 DISPLAY = ' '
 CALLBACK_PROGRAM = ' '
 CALLBACK_FORM = ' '
 MARK_TAB =
IMPORTING
 USER_RESET =
 TABLES
 VALUE_TAB = t_SAPGL
 FIELD_TAB =
 RETURN_TAB =
 DYNPFLD_MAPPING =
EXCEPTIONS
 PARAMETER_ERROR = 1
 NO_VALUES_FOUND = 2
 OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endmodule.
In the above code I am selecting 1000 rows from SKAT table and in the Search Help Popup it is also displaying 1000 rows but all are blank.
Please help me.
Regards,
Avaneet

Hi check my weblog on search help exit codeing..
https://wiki.sdn.sap.com/wiki/x/du0
\* Prepare for output
CALL FUNCTION 'F4UT_RESULTS_MAP'
TABLES
shlp_tab = shlp_tab
record_tab = record_tab
source_tab = lt_result
CHANGING
shlp = shlp
callcontrol = callcontrol
EXCEPTIONS
illegal_structure = 1
OTHERS = 2.
IF rc = 0.
callcontrol-step = 'DISP'.
ELSE.

How to assign search help for custom cost centre field in SRM 7.0

Hi Experts!!
We are currently working in SRM 7.0.As per our business requirement, in account assignment tab we need to use a custom
cost centre field (ZCOST_CENTRE) instead of standard cost centre field.It is observed that for standard cost centre field there is a standard web-dynpro search-help assigned where it will return the F4 search help values from backend.
Can any one of you please help me how can I assign the search-help for the custom cost centre field. Is there any FM to call the backend cost centre search help for custom field or any other way how can I achieve this?
Thanks in advance.
Regards,
Kalyani

kalyani,
i can see your requirement in below way..
as it just reads: you need to assign the standard cost center help to a z cost center field in component /SAPSRM/WDC_UI_DO_ACC.. which actually is fetched though the component /SAPSRM/WDC_UI_BACKEND_SH
so, if you see the component controller of SAPSRM/WDC_UI_DO_ACC you will see the component
USAGE_SH_F4 /SAPSRM/WDC_UI_BACKEND_SH
USAGE_SH_F4 /SAPSRM/WDC_UI_BACKEND_SH INTERFACECONTROLLER
so you can replicate the same functionality for your z field.
but can you clarify one thing.. why are you going for this z field in place of standard field ?

My itnues for pc is not working :( it shows that iTunes has stop working,I have downloaded Itnues many times but still it is not working, please help me

my itnues for pc is not working it shows that iTunes has stop working,I have downloaded Itnues many times but still it is not working, please help me

Please helppppp

Assign search help for a screen field in standard program?

Hi All,
Is there any other way to assign search help to a standard SAP screen field? (to be precise i want to assign search help to Recipient field in table control of components tab in transaction IW32/IW31)
I know we can do this by assigning search help through screen painter (by changing standard program, which is my last option).
Any advice/help will be greatly appreciated.

Hi,
I think you will find solution in below threads:
Re: Search Help for standard field
How to assign a search help
Search help for Standard SAP field
Reward if helpful
Rgds,

Search help for Acct Assignment not working

Similar Messages

Maybe you are looking for