Search Help not getting displayed

Hi ,
I have included my own Search Help ZSH to Standard Search Help MAT1 which is related to field MATNR , in the following path..
In MAT1->MAT1_A, I have INCLUDED my Search Help.
I have tested it in SE11, it's working fine.
But, in VA01 screen when I press F4 on the MATNR field only 9 Search Helps are displayed, and my Z-Search Help is not getting displayed.
What additional settings should I do for the display of my Z-Search Help?
Thanks in advance,
Shivaa...

Also look at this thread Search help enhancement - VA01
Regards,
Raymond

Similar Messages

Search Help Not show/display the data

Dear All,
              I have created a search help whith mannual itab of 4 entries. Itab is filled correctly, but when i see in the screen field it show the search help and display no record with the message 4 entries found; but I can't see the data.
pls. guide me what can be the problem
Thanks and Regards,
Sohail

Hi,
If you want to Show the Search help for Particular Field in Screen painter , You must give the Code In PROCESS ON VALUE REQUEST(POV).
ie.
process on value-request.
field P9611-REQ_STATUS module GET_REQ_STATUS.
and in Program Give the internal table Fieldname in Capital Letter while Passing in Fuctional Module.
like.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'REQ_STATUS2'    "internal table field
      dynpprog        = sy-dynnr
      dynpnr          = sy-dynnr
      dynprofield     = 'P9611-REQ_STATUS' "screen field name
      value_org       = 'S'
    TABLES
      value_tab       = req_status_tab "internal table
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc NE 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
With Regards
Kesavaperumal

I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

Has your carrier been having issues with Call Display? Do the telephone numbers come up when people call, or does it just show 'Unknown Number' or 'Blocked' ?

Screen fields not getting displayed after Line 16

Hi All,
There is a screen exit created in IW51, now the new requirment is to add 3 more fields. I added the fields below the exiting fields, in line number 15 , 16 &17. After executing the Tcode I could find that the field created in line 17 is not getting displayed in runtime. I have increased the screen length. The fields if moved to line numbers below 16 then they are getting displayed. Can anyone help me to find why it is not getting displayed after line 16.

Hi,
Can you give me the Enhancement name?
I searched for the exits using package , but i did not find any screen exists for that IW51 Tcode?

Workitems are not getting displayed in UWL

Hi All,
We have deployed ESS/MSS Business packages in our system. Also configured UWL to display workitems in portal. But when testing leave request, leave request workitems are not getting displayed in portal as UWL. Any help on this will be appreciated.
Thanks,
Krish.

Hello,
have created some new users and done with the leave request, it comes to backend inbox, but not
visible in portal. Re-configured UWL, but still the task not coming( leave request). For other users it is > coming?
Where have you created these users? Many times it is not enough to create new users in a backend system. You will have to create them in the data source which is used by the UME of your portal or to map this data source with the system where you have created your new users
You can see what data source your portal is using by going to
Portal --> System Administration --> System Configuration --> UME Configuration --> Data Source
If this Data Source doesn´t contain your new users, then UWL wouldn´t be able to show their items.
Here you can check if your user is contained in the data source:
Portal --> User Administration --> choose the right data source --> put in the username --> search
Please check if your users are correctly created.
Regards,
Iris

Export parameter in elementary search help not working.

I have created an elementary search help that will display all sold-tos for entered ship-to(s). Everything works fine except that the sold-to that is selected from the hit list is not being entered into the customer field on the selection screen.
eg transaction VD03, F4 on Customer, enter import parameters VKORG VTWEG SPART and KUNN2, hit list is displayed correctly and one line selected. I expect that my export parameter KUNNR should now appear in the Customer field of VD03 but its not.
This is my elementary search help definition:
Elementary srch hlp ZDEBIC                         Active
Short description    Customers for Ship-to
Selection method   Z_DEBIC            Dialog type
Text table                            Hot key         2
Search help exit    Z_SHIP_TO_SEARCH_HELP_EXIT
Parameter IMP EXP LPos SPos Data Element Default Value
SORT1                       1                  AD_SORT1
SORT2                       2                  AD_SORT2
MCOD1                      4                  MCDD1
MCOD3                      5                  MCDD3
PSTLZ                        6                  PSTLZ
KTOKD                       7                  KTOKD
VKORG     x       x       8        1        VKORG         VKO
VTWEG     x       x       9        2        VTWEG        VTW
SPART      x       x      10       3        SPART          SPA
KUNN2      x               11       4        KUNN2          KUN
KUNNR              x       3                  KUNNR
I suspect the problem may be with default value KUN against KUNN2, but if I put it against KUNNR, I get a message "No values for this selection" instead of my hit list.
Can anybody give me a clue as to the problem?
Thanks,
Brigitte

I just found out - I had asked my fellow ABAPer to have a look at it and he just told me that he had changed the Parameter Assignment of the Collective Search Help from the proposed one of KUNN2 C KUNNR to KUNNR C KUNNR. It seems that was necessary as well so I'm putting this in for future reference of anybody with the same problem.

'@' not getting displayed in the ALV report

Hello,
I am facing a strange issue in the ALV report display. A string starting with '@' is not getting displayed and says "default icon " on the report. and this is varying from system to system for the same user.
can anyone please help me in resolving the issue.
Thanks in advance.
Thanks and Regards,
Santhosh Guptha N.

@ is a default value as per ALV internal process. This is used in icons .
I think this is causing the confusion.
Check in the fieldcat if there is any adjsutment to be made to handle this.
Br,
Vijay

Portal Forms are not getting displayed in the new oracle environment.

Hi All,
The Forms in our Portal applications are not getting displayed after we have done the upgradation of Database in Unix from 8i to 9i. The reports are working fine.The forms that were added as portlets are not getting displayed and other forms that are called thorough links returns error when it is run. The Newly created forms are also not running but returns error. The Portal Version is 3.0.9.8.3. Pls help.
Regards,
Tom

Hi ,
Based on the requirement , check whether the customer contact has been done carried out for the invoice , then possibility it must have gone out of the worklist , chekc whether the Invoice posted in the AR has been transferred to FSCM collection .

Battery , time , signal strength bar is not getting displayed in home screen , these will be displayed only when i click on any app. Can u let me know the setting change ?

Battery , time , signal strength bar is not getting displayed in home screen , these will be displayed only when i click on any app. Can u let me know the setting change ?

Did you check the Zoom setting?
Have you tried a reset (reboot)? Hold HOME and SLEEP until an Apple logo appears.
If it isn't Zoom and a reboot doesn't help try Settings/General/Reset - Reset all settings

Default Value is not getting displayed in SUN ONE Ldap

Hello,
I have created an attribute in slapd.user_at.conf and it is associated in slapd.user_oc.conf.
The attribute default value is given through SUN ONE Console. But, In our application the default value is not getting displayed.
We need the default value to run our applicatin. Can anyone help me for this issue
Regards,
K. Senthil Kumar

Hi anandkumar,
I belive this issue can be resolved by changing the Query proprties for the perticular field.
Kindly check the Field proerties in query designer and ensure that Text is enabled ather than Key.
__Field property check up:__Go to query designer->click onn the field-> Right hand side in properties click on display tab-> select Text in drop down menu of Display as tab.
FURTHER CHECK UP: check the master data avaiulability for the perticular info object, if masterdata is not available, do the text data for txt data availability in report level.
Hope this helps you!!
Best Regards,
Maruthi

Material type not getting displayed in the cube........

Hi,
In my infocube material type for one of the material is not getting displayed.
When I check in the content of the cube for this material all the fileds are getting displayed except material type.
However it is present in the material master data from which it is put into the update rules to populate in the cube.
Its getting displayed for some other materials , so we cant say that mapping is wrong or problem with update rules.
Can some body let me know what could be the reason.
Thanks,
Jeetu

Hi Jeetu,
can you check in your cube if you have for one material, entries with AND entries without the MATL_TYPE? If this is the case then you were loading transactional data before having the corresponding material master data.
You should adapt your scenario:
- first do not use the standard attribute derivation during your URules: performance is very bad.
- implement a start routine filling an internal table with your material and MATL_TYPE for all entries of material in your datapackage.
- implement an update routine on the MATL_TYPE with a READ on this internal table an raise an ABORT = 4 if the MATL_TYPE is initial or the material in not found.
Now to fix your situation you'll have to reload your cube or alternatively just reload your missing MATL_TYPE MATERIAL from your cube itself and selective delete those which are empty.
hope this helps...
Olivier.

Graph is not getting displayed in R12

Hello folks,
Cureently m working on R12 upgrade project.
And we have a report which is working fine 12 but the graphs are not getting displayed as like 11i.
Could you plz any one help how to fix the issue.
Note: There is no error is coming up. But in the graph part , graph is not getting displayed.
Regards,
Krishna

Hello folks,
Cureently m working on R12 upgrade project.
And we have a report which is working fine 12 but the graphs are not getting displayed as like 11i.
Could you plz any one help how to fix the issue.
Note: There is no error is coming up. But in the graph part , graph is not getting displayed.
Regards,
Krishna

Links not getting displayed in the contextual panel

Hi,
I have created a contextual panel inside a transparent container. And created a method in the same view supply_values of type supply function to supply the values to the panel.Inside the method I have coded like:
DATA TAB TYPE WD_THIS->ELEMENTS_N_VIEW_SWITCH.
DATA LINE TYPE WD_THIS->ELEMENT_N_VIEW_SWITCH.
LINE-TEXT = 'User Manual'. "#EC NOTEXT
LINE-ENABLED = ABAP_TRUE.
APPEND LINE TO TAB.
LINE-TEXT = 'Logout'. "#EC NOTEXT
LINE-ENABLED = ABAP_TRUE.
APPEND LINE TO TAB.
NODE->BIND_TABLE( TAB ).
Also in the context of the view I have created a node and supplied the method 'supply_values' in the supply function.Under the node I have 2 attributes named text and enabled. Text is of string type and enabled is of boolean type. In the properties of the contextual panel I have bound the visible property with the enabled attribute.
Now when I am running this application , links are not getting displayed in the contextual panel. Though when I debug TAB contains the values. Please suggest if I have missed out something or I need to look into the properties of the contextual panel. Any pointers will be really helpful.
Regards,
Ashutosh

Hi,
Can you elaborate ' ItemEnable property of ViewSwitch'.
I have already bound the enable property of the panel with a context attribute of type wdy_boolean but it is still not working.
Regards,
Ashutosh

Header not getting displayed in the next page in the second table

Dear Experts ,
I have a query regarding Header not getting displayed in the next page in the second table of the main window. .Let me elobrate the issue.
I have a smartform in which there are 2 tables TABLE 1 and TABLE 2 in the smartform MAIN window. TABLE 1 is for pending PO and TABLE 2 is for future delivery date P O separated by text in between.
Now the header for both the tables and the data are getting displayed properly if the total output is in only one page. But If there are more entries in the TABLE 1 the Header for the TABLE 2 is not getting displayed. Header for TABLE 1 yet gets displayed properly in the next page in case of more entries.
Only issue is that Header for TABLE 2 is not getting displayed in second page but it gets displayed if the entries are less in TABLE 1 and the total output is in one page .
Please provide a elobrate solution on this problem as the requirement is urgent.
Thanks,
Regards,
Sachin Hada

Hi Sachin,
you need to cteate two pages FIRST and NEXT.
in first page --> FIRST
next --> NEXT
in next page
page---> NEXT
next ---> NEXT.
you copy the first page main window is the same in next page
aslo
I think help ful for you
thanks & Regards
BHUPAL.

Whenever a record is Edited the rows are not getting displayed in the repor

Hi all,
When a new record is added or edited, It is physically getting added or edited according to the process, but those records are not getting displayed in the report..
Please Any body faced this situation...
Help me to identify what error i am doing........
thanks in advance
kavitha L

Hi KChamarti,
I am also trying to display images insid the datagrid but i get a weird broken image(all silver gray).
My item renderer is:
          <mx:DataGridColumn headerText="Type">
               <mx:itemRenderer>
                 <mx:Component>
                  <mx:HBox verticalGap="2">
                      <mx:Image id="dgImage" source="\assets\images\{toLowerCase(data.type)}.jpg" />
                      <mx:Label text="{data.type}"/>
                    </mx:HBox>
                 </mx:Component>
               </mx:itemRenderer>
            </mx:DataGridColumn>
Am i mentioning the source of the image in the right way?

Search Help not getting displayed

Similar Messages

Maybe you are looking for