Material type not getting displayed in the cube........

Hi,
In my infocube material type for one of the material is not getting displayed.
When I check in the content of the cube for this material all the fileds are getting displayed except material type.
However it is present in the material master data from which it is put into the update rules to populate in the cube.
Its getting displayed for some other materials , so we cant say that mapping is wrong or problem with update rules.
Can some body let me know what could be the reason.
Thanks,
Jeetu

Hi Jeetu,
can you check in your cube if you have for one material, entries with AND entries without the MATL_TYPE? If this is the case then you were loading transactional data before having the corresponding material master data.
You should adapt your scenario:
- first do not use the standard attribute derivation during your URules: performance is very bad.
- implement a start routine filling an internal table with your material and MATL_TYPE for all entries of material in your datapackage.
- implement an update routine on the MATL_TYPE with a READ on this internal table an raise an ABORT = 4 if the MATL_TYPE is initial or the material in not found.
Now to fix your situation you'll have to reload your cube or alternatively just reload your missing MATL_TYPE MATERIAL from your cube itself and selective delete those which are empty.
hope this helps...
Olivier.

Similar Messages

Amount not getting displayed in the cube

Hi,
I have a ZTable which has got an Amount field declared like this.
AMOUNT WAERS CUKY 5 0 Currency Key
And I declared a ZAMOUNT as Amount in the cube and provided 0CURRENCY.
Initially there was no value in the Amount column in the Ztable and hence could not see any value of Amount in the cube.But after entering values in the ZTable, I deleted the replicated the DS, create TR, UR and then create an InfoPckg and then created the Data Transfer Process. But still I am not able to see the Amount Value in the cube.
Kindly Help
Sam..

> hi Sam,
>
> did you assign AMOUNT field from ztable to infoobject
> ZAMOUNT in transfer rules ? move AMOUNT from left to
> right in tab 'datasource./transf.rules ?
> and ZAMOUNT mapped ? (with ZAMOUNT)
>
> hope this helps.
Hi Edwin,
Assigning and mapping which you mentioned is just pulling an arrow from the left Amount to right ZAmount, right? I did that. But there is an additional 0Currency on the right side without getting mapped? Should I map that also to Amount? Any issue with Rules.
Regards,
Sam...

Total is not getting displayed in the ALV output.

Hi,
Total is not getting displayed in the ALV output.
I m using :REUSE_ALV_BLOCK_LIST_APPEND & REUSE_ALV_BLOCK_LIST_DISPLAY
Are there any issues with it as the same settings are working fine with REUSE_ALV_LIST_DISPLAY
source code:
DATA: layout TYPE slis_layout_alv,
      IT_eventS TYPE slis_t_event,
      fcat   TYPE slis_t_fieldcat_alv WITH HEADER LINE,
      rec_fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
TYPES: BEGIN OF ty_tab,
      belnr TYPE dberchz-belnr,
      belzart TYPE dberchz-belzart,
      net TYPE dberchz-nettobtr,
      END OF ty_tab.
DATA: lt_tab TYPE STANDARD TABLE OF ty_tab.
SELECT belnr belzart nettobtr
FROM dberchz
INTO TABLE lt_tab[]
WHERE belnr eq '000000000001'.
if sy-subrc ne 0.
ENDIF.
* defining layout
layout-colwidth_optimize = 'X'.
layout-def_status = 'X'.
*defning event
*event
*defining field catalog
fcat-col_pos = 1.
fcat-fieldname = 'BELNR'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 2.
fcat-fieldname = 'BELZART'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 3.
fcat-fieldname = 'NET'.
fcat-tabname = 'LT_TAB'.
fcat-do_sum = 'X'.
APPEND fcat.
*calling alv
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
    i_callback_program             = 'YZ_PLR'
*   I_CALLBACK_PF_STATUS_SET       = ' '
*   I_CALLBACK_USER_COMMAND        = ' '
*   IT_EXCLUDING                   =
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
    is_layout                        = layout
    it_fieldcat                      = fcat[]
    i_tabname                        = 'LT_TAB'
    it_events                        = IT_EVENTS[]
*   IT_SORT                          =
*   I_TEXT                           = ' '
tables
    t_outtab                         = lt_tab[]
* EXCEPTIONS
*   PROGRAM_ERROR                    = 1
*   MAXIMUM_OF_APPENDS_REACHED       = 2
*   OTHERS                           = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
Thanks,
Gaurav

Hi
No I don't think, this is my code (based on your code) and it works fine:
TYPE-POOLS SLIS.
DATA: BEGIN OF LT_TAB OCCURS 0,
       BELNR LIKE BSEG-BELNR,
       GJAHR LIKE BSEG-GJAHR,
       WRBTR LIKE BSEG-WRBTR,
       WAERS LIKE BKPF-WAERS,
      END OF LT_TAB.
DATA: LAYOUT     TYPE SLIS_LAYOUT_ALV,
      IT_EVENTS TYPE SLIS_T_EVENT,
      FCAT       TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
      REC_FCAT   TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
START-OF-SELECTION.
FCAT-COL_POS       = 1.
FCAT-FIELDNAME     = 'BELNR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'BELNR'.
FCAT-REF_TABNAME   = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS       = 2.
FCAT-FIELDNAME     = 'GJAHR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'GJAHR'.
FCAT-REF_TABNAME   = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS       = 3.
FCAT-FIELDNAME     = 'WRBTR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-CFIELDNAME    = 'WAERS'.
FCAT-REF_FIELDNAME = 'WRBTR'.
FCAT-REF_TABNAME   = 'BSEG'.
FCAT-DO_SUM        = 'X'.
APPEND FCAT.
FCAT-COL_POS       = 4.
FCAT-FIELDNAME     = 'WAERS'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'WAERS'.
FCAT-REF_TABNAME   = 'BKPF'.
FCAT-DO_SUM        = SPACE.
APPEND FCAT.
SELECT * FROM BSEG INTO CORRESPONDING FIELDS OF TABLE LT_TAB
    WHERE BUKRS = 'MAAB'
      AND BELNR = '0000000001'.
LT_TAB-WAERS = 'EUR'.
MODIFY LT_TAB FROM LT_TAB TRANSPORTING WAERS WHERE WAERS = SPACE.
*CALLING ALV
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
    EXPORTING
      I_CALLBACK_PROGRAM = 'ZPROVAMAX5'.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      IS_LAYOUT   = LAYOUT
      IT_FIELDCAT = FCAT[]
      I_TABNAME   = 'LT_TAB'
      IT_EVENTS   = IT_EVENTS[]
    TABLES
      T_OUTTAB    = LT_TAB[].
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
I've also inserted a currency field
Max

Work item not getting displayed in the portal

Hi experts,
We are creating a protoype for one of the standard HCM form for change in working time. When we initiate the process, the workflow is supposed to identify the agent(which is the manager in this case) and push the work item in the inbox of the manager.
In our issue, we are able to see the workitem in SAP inbox, but the same work item is not getting displayed in the portal.
If we try to approve from the SAP inbox, the hard coded message u201CWork item can only be executed using the Portal and the UWLu201D comes. [this comes through the method of one of the tasks 17900101 which we are using for approving the form]
We commented the message by using a Z class. Now we donu2019t get the hardcoded message, but still the workflow does not complete from here.
Can this be aan integration issue of the workflow tasks with the portal??Can someone elaborate on this??

<ItemType name="uwl.task.webflow.TS17900101.SAP_ECC" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchWebDynPro" executionMode="default">
      <ItemTypeCriteria systemId="SAP_ECC" externalType="TS17900101" connector="WebFlowConnector"/>
      <Actions>
        <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
          <Properties>
            <Property name="WebDynproApplication" value="ApproveFormApp"/>
            <Property name="WebDynproDeployableObject" value="sap.com/pa~asr~formstep"/>
            <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
            <Property name="openInNewWindow" value="yes"/>
            <Property name="display_order_priority" value="5"/>
          </Properties>
          <Descriptions default=""/>
        </Action>
      </Actions>
    </ItemType>
You have to say to your portal team to modify their XML file as above. In simple you hvae to configure the task in the portal and in the SWFVISU txn as follows with the following vizualization parameters
Task TS17900101 and visualization type is JavaWebDynpro
APPLICATION     ApproveFormApp
PACKAGE     sap.com/pa~asr~formstep

Links not getting displayed in the contextual panel

Hi,
I have created a contextual panel inside a transparent container. And created a method in the same view supply_values of type supply function to supply the values to the panel.Inside the method I have coded like:
DATA TAB TYPE WD_THIS->ELEMENTS_N_VIEW_SWITCH.
DATA LINE TYPE WD_THIS->ELEMENT_N_VIEW_SWITCH.
LINE-TEXT = 'User Manual'. "#EC NOTEXT
LINE-ENABLED = ABAP_TRUE.
APPEND LINE TO TAB.
LINE-TEXT = 'Logout'. "#EC NOTEXT
LINE-ENABLED = ABAP_TRUE.
APPEND LINE TO TAB.
NODE->BIND_TABLE( TAB ).
Also in the context of the view I have created a node and supplied the method 'supply_values' in the supply function.Under the node I have 2 attributes named text and enabled. Text is of string type and enabled is of boolean type. In the properties of the contextual panel I have bound the visible property with the enabled attribute.
Now when I am running this application , links are not getting displayed in the contextual panel. Though when I debug TAB contains the values. Please suggest if I have missed out something or I need to look into the properties of the contextual panel. Any pointers will be really helpful.
Regards,
Ashutosh

Hi,
Can you elaborate ' ItemEnable property of ViewSwitch'.
I have already bound the enable property of the panel with a context attribute of type wdy_boolean but it is still not working.
Regards,
Ashutosh

Whenever a record is Edited the rows are not getting displayed in the repor

Hi all,
When a new record is added or edited, It is physically getting added or edited according to the process, but those records are not getting displayed in the report..
Please Any body faced this situation...
Help me to identify what error i am doing........
thanks in advance
kavitha L

Hi KChamarti,
I am also trying to display images insid the datagrid but i get a weird broken image(all silver gray).
My item renderer is:
          <mx:DataGridColumn headerText="Type">
               <mx:itemRenderer>
                 <mx:Component>
                  <mx:HBox verticalGap="2">
                      <mx:Image id="dgImage" source="\assets\images\{toLowerCase(data.type)}.jpg" />
                      <mx:Label text="{data.type}"/>
                    </mx:HBox>
                 </mx:Component>
               </mx:itemRenderer>
            </mx:DataGridColumn>
Am i mentioning the source of the image in the right way?

Master Data Attribute is not getting reflected in the Cube?

Hi All,
I have loaded the data from ODS to the cubes for customer master and it contains a lot of navigational attributes
for instance :
master data for customer in development is
customer customer group 5(nav attributes) Customer pricing group
1001 HAW IE
And hence when i load the customer 1001 from the ods to the cubes i can see the customer contains navigtional attributes for customer pricing group but CUSTOMER GROUP5 doesnt gets displayed in the cube.
I check the master data it contains the values for customer group. How to Rectify this issue?
Pls advise me!!
Thanks
Pooja

hi all,
I have explicity clicked on the navigational attributes in the cube i can see the values for the other navigational attributes being displayed in the cube for customer master but then only one navigational attribute is not getting displayed.
For instance
customer, customer gp2, customer grp5
100, nr, nv
only customer grp5 is not getting displayed which has values in the master data but then customer grp2 along with customer is getting displayed.
Thanks
Pooja

Material cost not getting displayed in CN41N

Hi Gurus,
When we execute CN41N, Materials assigned to the Network activity are visible but the cost of each material is not getting displayed against it (under Proj. Cost Plan Column) and it is appearing as '0' whereas, it is appearing as an accumulated cost against the activity. I checked SAP notes for this problem, though I could see some notes which are very close to the problem but all are for Release 600 whereas we are using 604 (ECC 6.0). Have anyone encountered such problems or whether the cost will not appear against Material in CN41N.
Awaiting your valuable suggestions.
thanks in advance.
Vinodh

I have seen planned cost of material against material itself in structure report like CN41, CN41N under following conditions:-
1. Valuated Project Stock
2. Material is created using Reservation for WBS or PR+Res for WBS Procurement indicators.
3. Costing relevancy box ticked for material
4. Statistical Cost element exists for Inventory account.
I have not seen planned cost for non-stock item or material with res for network in project. This is purely based on my experience and I dont have any notes or help document to validate my statement.

Data is not getting displayed in the report from an Infoset.

Hi All,
I am having a report based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
Could anyone please suggest why the data is not getting displayed in the query designer.
Thanks & Regards,
A.V.N.Rao

Hi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao.

Header not getting displayed in the next page in the second table

Dear Experts ,
I have a query regarding Header not getting displayed in the next page in the second table of the main window. .Let me elobrate the issue.
I have a smartform in which there are 2 tables TABLE 1 and TABLE 2 in the smartform MAIN window. TABLE 1 is for pending PO and TABLE 2 is for future delivery date P O separated by text in between.
Now the header for both the tables and the data are getting displayed properly if the total output is in only one page. But If there are more entries in the TABLE 1 the Header for the TABLE 2 is not getting displayed. Header for TABLE 1 yet gets displayed properly in the next page in case of more entries.
Only issue is that Header for TABLE 2 is not getting displayed in second page but it gets displayed if the entries are less in TABLE 1 and the total output is in one page .
Please provide a elobrate solution on this problem as the requirement is urgent.
Thanks,
Regards,
Sachin Hada

Hi Sachin,
you need to cteate two pages FIRST and NEXT.
in first page --> FIRST
next --> NEXT
in next page
page---> NEXT
next ---> NEXT.
you copy the first page main window is the same in next page
aslo
I think help ful for you
thanks & Regards
BHUPAL.

SAP Fields not getting displayed on the BDT screen

Hello Gurus,
I am trying to add 2 custom fields on to the claims management screen. The following steps were followed to add 2 fields on to the claims Management subclaim screen.
1. Create a field group Zxxxxx1 with the two fields attached to it as input enabled.
2. Create a View Zxxxxx2 attach the created field group Zxxxxx1, then create a subscreen screen add two fields to the screen and make them as input enabled. Then attached the subscreen to the View.
3. Create a PBO and PAI function modules for the screen and attach it to the View Zxxxxx2.
4. Create a section Zxxxxx3 and attach the view Zxxxxx2 to the section.
5. Attach the section to the Subclaim Overview Screen.
6. Inspite of doing all the above steps the screen is not getting displayed or the Function module PAI / PBO / FMOD is not being called.
Since I am attaching the section to a standard screen sequence I am not doing any modification to the screen sequence and screen sequence catagory.
Kindly let me know the steps I am missing in the configration of 2 new fields via BDT.
Reagrds,
Shiva

Hi Shiva,
did you create your own Z BDT application? Is it set to be active?
I have no access to any claims management system: Does the claim object support divisibility? If so, have you assigned the correct data set in your view?
Also, if you have your own Z BDT application and the claim object does support divisibility, did you assign the Z application to the divisibility view?
Regards,
Frank
Message was edited by: Frank Vieregge

I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

Has your carrier been having issues with Call Display? Do the telephone numbers come up when people call, or does it just show 'Unknown Number' or 'Blocked' ?

VA00 condition type not getting determined for the returns order

Hi All,
I have a case where VA00 condition type not getting determined for the returns order that has been created with respect to the billing document.
When the pricing conditions are being copied from invoice it is getting copied but later it is getting deleted in the include LV61AA42.
Note:VA00 condition type is getting deleted from the internal table tkomv[].
If any one came across this scenario can you please help me.
Request your valuable inputs

Hi,
Please check the copy control setting in VTAA.
Maintain the pricing type as "D" at item category level for the respective document type .
Hope this will resolve your issue.
Regards,
Krishna O

Terms and conditions not getting displayed on the last page

Hi All,
I have to display a smartform, on the front side of the page i have to display material details and on the back side of the page i have to display terms and conditions. I' am unable to print the material details and terms and conditions in duplex mode, but on the last page only material details are getting displayed, terms and conditions are not getting displayed.
Can you please help me how to make the terms and conditions get printed on the back side of the last page.
Thanks,

I'm a bit confused by the statement "I' am unable to print the material details and terms and conditions in duplex mode".
I suppose you meant to say "I am able to print the material details and terms and conditions in duplex mode", correct?
If the problem is that on the last form page, the T&C is not getting printed on the back of the form, you could force the T&C page by using a flow logic command as the very last element of the main window, which gets processed when all the data is already output. For the command, use the 'Go to New Page' and specify the page name for the Terms & Conditions.
In case this causes an issue that the last page is printed twice (since the T&C page is likely defined with the next page being NEXT_PAGE), then copy the already existing T&C page, call it LASTPAGE and leave the Next Page attribute empty.

Statistical condition types not getting displayed in invoice

We have configured the tax collected at source (TCS) condition types and make them as statistical in the pricing procedure. Now, the issue is when we are using them the values for these condition types are getting calculated correctly as the total value is correct but in the invoice their individual values are not getting displayed.
In the analysis also we can see that the condition records are found but being statistical condition they should get displayed in the invoice as only the correct total value will not serve the purpose, please help
Thanks & regards
Puneet Agrawal

Hi
Keep a break-point (hard) in these program lines and debug and see that whether the condition type(KSCHL) related to Taxes is appearing here or not.
If the condition type for taxes is coming then you can print the taxes.
First check the related condition type for Taxes in T685 table and see here in the code.
<b>Reward points for useful Answers</b>
Regards
Anji

Material type not getting displayed in the cube........

Similar Messages

Maybe you are looking for