Search not extending to Share Point

OK so I have 5 macs one of which I use as a filer server. All running latest version of Mountain Lion.
The File Server mac I have set up some share points and applied permissions. I have owner permissions and all other users have been set read only permissions.
On the client macs I have ensured that the Share Points are not added to the Privacy tab of Spotlight. I have even added them and them removed them to force re-indexing.
So, when I go into a Share Point from a client and carry out a search, I get no results at all with the exception of when I carry out a search (as the owner user). I am thinking that the failure of the search to provide results is based on the permissions set for the user. Surely not !
Can anyone help me out with light of throw any light on it.
Thanks.

Triple-click anywhere in the line below on this page to select it:
mdutil -as | open -ef
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that.

Similar Messages

AD Changes are not reflecting our Share point

We are using our exchange 2010 server has our messaging solution. we are also use our SharePoint 2010 for our portal.
we are enabled multiple domain( abc.com, xyz.com) in our exchange and able to send and receive mails properly.
for some reasons we have changed the [email protected] to
[email protected] in our AD and Exchange.
but in our sharepoint work flow it shows only
[email protected] only. the AD Changes was not replicated in our share point.
anybody help in the issue was appreciated.
awaiting for the update from anybody eagerly.
Jags

The User information list for that site collection will be out of date.
You will need to ensure that:
The UPS Sync process is configured and working
The user is currently 'Active' in the site (get them to log into it)
The UPS Sync job (to sync UPS to site collections) is running.
To confirm this; check their properties in the hidden user information list on the site collection, check their profile in the UPS, check the synch history and if necessary the MIIS logs and then finally run the timer job.

Captivate 6 video files not loading on share point 2013

Hello,
I use Adobe Captivate 6 and have courses that I'm loading to a share point site for learners to access. I worked off of my C: drive, then copied the published folders on a shared drive. I then linked the html URL to play the course.
When the courses were built, some simulations were recorded in video mode. I noticed that in the published folder, Captivate creates mp4 files. For some reason, when the course plays on share point, it does not play these files and the course clocks until you advance to the next slide. Everything else works fine, no issues.
I'm looking to see if anyone else has encountered this same issue and am curious what was done to fix it.
Thanks! Marissa

Thanks for the reply Ron! I checked with my share point admin and she said that share point 2013 (our version) can play mp4 files, so there shouldn't be an issue there.
She's not familiar with Captivate so it's kind of difficult getting to the root of the problem, but somewhere along the line, when the course link is accessed, Captivate is looking for that mp4 file to play it, and it cannot find the file.
I thought then maybe I would take the mp4 file in the published folder and try to embed the video directly into the course, but I haven't tried that.
Any other suggestions?
Thanks, Marissa

Send email is not working in share point desinger 2013 for project server 2013 workflow

Hi,
How to configure email for project server 2013. i have created workflow where i am sending email. It is not sending it.
i have set outgoing mail setting. Tasks are created in my workflow but mail is not sending.
Thank you for helping us.
Thank You
Vinay

Hi,
How to configure email for project server 2013. i have created workflow where i am sending email. It is not sending it.
i have set outgoing mail setting. Tasks are created in my workflow but mail is not sending.
Thank you for helping us.
Thank You
Vinay

Content search web part in shar Point 2013

how to write query in which parameters will comes from end user and depend on which result will come

Hi,
You can add the query parameter in the content search web part as shown in the below screenshot. "MyParameter1" is the parameter you will be passing from the URL.
Please mark it answered, if your problem resolved.

Office 365 Developer site for Share point is not working.

hi,
i created office 365 developer site for share point, it is not working for share point, i am getting error when click on Share point from ADMIN.We will getting am Error:

Hi,
I understand that you stay in the Office 365 admin Center, when you click the SharePoint option, you get the error page.
I recommend to enter the URL as below in the Brower to check whether the account can access SharePoint admin Center.
https://sitename /_layouts/15/online/SiteCollections.aspx
Here is a similar thread for
your reference:
http://community.office365.com/en-us/f/148/t/192116.aspx
Regarding SharePoint Online, for quick and accurate answers to your questions, it is recommended that you initial a new thread in Office 365 forum.
Office 365 forum
http://community.office365.com/en-us/forums/default.aspx
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to configure SharePoint HNSC with a reverse proxy server so that HNSC Share Point URLs are not exposed to end users.

Could you please let me know how SharePoint HNSC can be configured with a reverse proxy server so that HNSC Share Point URLs are not exposed to end users.
In normal path based site collections/web applications, reverse proxy configuration can be done using alternate access mappings with Public URL = "proxy URL", internal = "HNSC Share Point URL" so that share point sends response back
to Public URL = "proxy URL".
In Host Named Site Collections, alternate access mappings are not supported. Each HNSC is designed to have only one URL in each zone. Zone is one of the five zones(Default,Intranet,Internet,Custom,Extranet) with each of which only one alternate
URL is associated. This is what we are able to get using power shell command "Set-SPSiteUrl", but this will not help us to get the response back to proxy URL after a request sent to share point because we could not find any mechanism in share
point HNSC to respond to a different URL(proxy URL). Consequently, Share Point URLs are exposed to external users.
Below share point article in MSDN blog is symmetrical to what we are observing with Share Point 2013 and Proxy Server. It mentions that internal HNSC URLs can’t be hidden using any proxy server. If hiding the internal Share Point URLS is a requirement,
it suggests to use a web application instead of host named site collections.
Though I’m also observing the same behavior with Share Point 2013 HNSC, Could you please confirm my understanding is correct.
http://blogs.msdn.com/b/kaevans/archive/2012/03/27/what-every-sharepoint-admin-needs-to-know-about-host-named-site-collections.aspx
Excerpt from above article-
"Host Named Site Collections Only Use One Host Name
Continuing on the discussion on AAMs and host named site collections, you cannot use multiple host names to address a site collection in SharePoint 2010. Because host-named site collections have a single URL, they do not support alternate access mappings and
are always considered to be in the Default zone. This is important if you are using a reverse proxy to provide access to external users. Products like Unified Access Gateway 2010 allow external users to authenticate to your gateway and access a site
as http://uag.sharepoint.com and forward the call to http://portal.sharepoint.com. Remember that URL rewriting is not permitted. Further, a site collection can only respond to one host name. This means if you are using a reverse proxy, it must forward the
calls to the same URL. If your networking team has a policy against exposing internal URLs externally, you must instead use web applications and extend the web application using an alternate access mapping."<u5:p></u5:p>

Hi Satish,
You are right that only one URL is allowed for each zone of the host-name site collections in both SharePoint 2010 and SharePoint 2013.
It is by design that each host-name site collection only support one URL for each zone.
The article below is about RTM version of SharePoint, and it is the same for SharePoint 2013 with the latest CU.
https://support.microsoft.com/en-us/kb/2826457
So to make the URL of HNSC not exposed to external users is not supported, you need to use path-based sites instead.
Best regards.
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Spotlight searches on network share points are slow

I have a 2008 Xserve running SL 10.6.8
I can perform local spotlight searches directly on the server with no issue. When users connect to a share point on the Xserve and attempt to search it using Spotlight, Finder freezes and pinwheels for a while and finally recovers and continues on with the searches.
The freezing can last as short as 5-10 seconds and can be as long as a few minutes. The users are getting irritated as this is a common occurence.
If I restart the Xserve, the issue will go away for about a week. It's almost like clockwork...a week goes by, and the Xserve needs to be reset.
The hard drives in the Xserve are over 3 years old, and I'm not sure if it could be a hardware issue or something else entirely. Does anyone have any suggestions on what tools I could use to determine the health of my Xserve's hardware or any other ideas as to what may be causing this issue?
Thanks

Ran a Drive Genius scan and integrity check on the RAID volume on the Xserve with no errors reported... so either Drive Genius isn't finding anything wrong or the drives are genuinely in good shape.
I'm planning on setting up some Automator scripts to restart the server during downtime on the weekends but I feel this is a less than desireable solution.

Spotlight NOT indexing root of share point

Wondering if anyone else has ever encountered this issue...
I have a 10.4.9 server install on a G5 Xserve, which has recently stopped allowing any successful searches against the root of the 3 configured share points. It will search properly if you drill down even one level, although that clearly restricts the functionality of being able to perform finds!
The share points are 3 folders located in a second ADM module.
I've walked through variants on the suggestions included in the following thread:
http://discussions.apple.com/thread.jspa?messageID=1242226
With the addition of specifically grep/rm'ing all .Spotlight-V100 folders in place of mdutil -E /Volumes/Name; I've also done the procedure both on the server as root and as client via the above instructions.
I've also created new share points from new folders, which exhibit the exact same issue... so I doubt that it's with any sort of config on the share points themselves.
Is it possible that the volume index for the second drive is being kept in a "primary" .Spotlight-V100 folder, say on the boot volume? I'm banging my head now!
Any help or insight would be much appreciated.
Regards,
Brendon

jimbarg wrote:
Exact same problem with me. I'm still not getting any decent replies from anyone here on the discussions. I've been trying to work with one person who responded to my original post, we've been going through various procedures to try to pinpoint the problem, but so far, no luck. I figured I'd post here as well because MAYBE someone has found a solution for this. It seems you're not the only one with this problem.
Does anyone know if there's a singular file where Spotlight stores its index data, and can it be located, tossed in the trash, and be automatically rebuilt? It seems that every time that I try to force a re-index (by turning the Spotlght Privacy settings on and off for my hard drive), Spotlight fails to re-index (well it seems that way, anyway, because there's no indication of re-indexing taking place in the Spotlight menu item on the top right side of the screen). If there is such a file, I'm wondering if it's somehow corrupt and just refuses to be rebuilt.
Any ideas anyone?
Have you tried trashing the
com.apple.spotlight.plist
from User > Library > Partition and then reindexed with Spotlight?
Pete

Share Point mobile view not working for Custom & Out of Box Web Parts into mobile devices

Hi All,
When we open our share point application in mobile view it gives an error mention below:
some apss, such as content Editor are not supported in mobile view.Tapping on the Title area can bring up navigation window.
We have custom Page Layouts & Master Page with custom Web Parts.
Please revert asap.
Sachin

Hi,
According to your post, my understanding is that you had an issue about the Mobile Devices.
Did you use the IOS Mobile Devices?
Per the pervious threads, we should use the IOS 7 and the above verison.
http://social.technet.microsoft.com/Forums/en-US/b69a342b-b9a3-43f6-b890-c3c3cd7f655c/some-apps-such-as-web-part-page-title-bar-are-not-supported-in-mobile-view-tapping-on-title-area?forum=sharepointadmin
More reference:
http://social.technet.microsoft.com/Forums/en-US/b69a342b-b9a3-43f6-b890-c3c3cd7f655c/some-apps-such-as-web-part-page-title-bar-are-not-supported-in-mobile-view-tapping-on-title-area?forum=sharepointadmin
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Share point in server admin not working correctly... I think

I suspect that the share point in server admin is not working correctly. In workgroup manager when I click on a user and then click on the "home" tab, under the full path field I see a file path of:
afp://server.mydomain.com/Users
However if I go to Server Admin -> AFP -> Share Points then click on the Users share and then click on the share point tab below, enable auto mount is disabled. How can this be possible? I thought for a directory to show up in home in workgroup manager it had to be set as an auto mount. Has something possibly corrupted? And what?

Here's a bit more information about our setup and our experiences with Apple's CUPS implementation:
On the server, all printer queues are set up with only lpr and ipp sharing enabled with the PPD setting for each printer set to Generic Postscript. We found that setting the PPD to the printer specific one on the server caused problems when clients tried to use printer specific options, like paper tray selection, etc.. The selection would be undone, apparently because the driver on the server would override the previous settings. Using Generic Postscript allows the client PPD settings to go through unmodified. Our printers are general a mix of HP LaserJets and some Sharp Copiers.
All clients use lpd to the server queues with the printers' actual PPDs configured. Using ipp is superior in that printer feedback (jams, out of toner, etc) makes it back to the clients, but ipp only works when the client, the server, and the printer are on the same network. If the ipp client is not on the same network, the client spooler immediately goes into a paused state and the print job is stuck on the client.
Using lpd to the server queues works reliably, but there is no feedback to the client. Jobs disappear from the client queue and go to the server, appearing to the user as a successful print. If the printer is down, there's nothing they can see or do about it.

Share Point 2013 Designer not showing platform as "Share point 2013 Workflow" at the time of workflow creation.

Hi All,
I am trying to create workflow for my Share Point 2013 site. To do this, I installed Share Point 2013 Designer,
then created couple of workflows in that, using "Share point 2013 Workflow" platform.
But when today, I tried to create workflow, I found that "Share point 2013 Workflow" platform option was not there. Because of that I am unable to create and deploy workflow on my SP 2013 site.
I am really not getting the problem. As I created some workflows using "Share point 2013 Workflow" platform on same share point designer and now I dont see that option in dropdown.
Please suggest me something for this. I tried all possible solution which are present on internet.
Thanks in advance.

Hi,
Since you are posting the thread in SharePoint 2013 server forum, I assume you are using SharePoint server 2013.
I understand the option SharePoint 2013 platform disappears when you create a workflow in Designer, the issue might be caused by workflow manager. Please refer to the article below and check workflow configuration per the steps listed:
http://techbrij.com/the-option-sharepoint-2013-workflow-platform-not-available
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Use of KM services and TREX Search Engine From share point portal

Hi All,
We would like to Use of KM services and TREX Search Engine From share point portal.
For this purpose we interoperability between windows sharepoint and SAP Portal.
Please provide necessary documents or suggestions for interoperability for above requirement.
mail id : <b>[email protected]</b>
Thanks in advance
Regards
Swarna B

Hi,
See this this links:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e891378-0601-0010-5386-a3387f1b161b
Regards,
Senthil K.

Folders Not Showing in Server Admin AFP Share Point?

Hello all,
My problem is I can make a folder in Server Admin under AFP Share Point, But the Folder wont actually be made on the HD.
Under Server Admin AFP Share Point it will tell me that it doesn't exist?
So I thought I'll go to that point on the HD and make the folder then set the permissions to it... nope I can make the folder I can see it in finder and in terminal, But not in Server Admin AFP Share Point.
I have never seen this before any help is greatly welcomed.

Hi Kristoffer,
I have seen an attribute for folder object which could control SharePoint folder hide or show in webdav explorer view, you can use PowerShell to output the problematic folder property, see if it the case, then use the PowerShell code to set it's property
with blank value to make it show in explorer view,
Use the PowerShell to get the folder object and then check the property value with this code line $folder.Properties["vti_winfileattribs"]
#folder can be site, library level and folder level
$folder = (Get-SPWeb http://sp).Folders["shared documents"].SubFolders["folder1"]
#hide folder
$folder.Properties["vti_winfileattribs"]="00000016"
#show folder
####$folder.Properties["vti_winfileattribs"]=""
$folder.Update()
https://social.technet.microsoft.com/Forums/lync/en-US/9ceafb38-24dc-466c-b497-2cee062b81cf/explorer-view-hidden-folder-attribute?forum=sharepointgeneral
Thanks
Daniel Yang
TechNet Community Support

Ls does not show moved files on share points

We run an XServe G5, and we've recently had a problem with Linux clients connecting up to the share points on the server and not being able to see recently moved files in linux.
Any suggestions or assistance would be welcome.

FAM is a daemon donated from SGI to help clients monitor changes on NFS mounted file systems and not overload the server. It was ported about 5 years ago. I was wondering, if it was running on the Linux boxes if it would be looked at, or if it was UDP, maybe because OSX doesn't have it, the updates/notifications weren't being made.
If that were the case, maybe some extra options would be needed in the Linux boxes /etc/fstab.
Roger

Search not extending to Share Point

Similar Messages

Maybe you are looking for