Search results showing the source before the document title

Hello,
I have created a BI Catalog in Sharepoint 2010, which consists mainly of libraries with rdl items and I have also set a content source in Search Service to search into these libraries. Search results were fine, but after the
last crawl I have noticed a change in the titles. The latest crawled items begin with "Reporting Services -" in the title which probably is resulted by a
differientiation in the crawl method. All the past crawled items keep the document name as a title without any prefix.
I am also certain that the problem is not in the web part which presents the results, because I have found in database level that the title field in the
dbo.MSSCrawlURL table is prefixed for the new items. If you have experienced the same problem please help. Thank you in advance.

Hi,
I'm seeing the same issue after upgrading the SharePoint 2010 to SharePoint 2013.
When I search any upgraded document in SharePoint 2013, the document's "Last Modified Date" was showing an incorrect value in Search Results page but other metadata of document like "Last Modified User" is showing the correct
value so the problem is not with document crawl, something wrong with Last Modified Date property in Search results.
I have seen below comment as answer but I didn't understand the solution to fix this issue for all upgraded documents.
The most likely cause is that there is metadata on the documents that is set to that date which is overriding the other dates in the search result. SharePoint isn't particulary imaginative so it's got to be finding that date from somewhere.
Do we have any solution for this issue? Is this issue will be addressed in SharePoint 2013 SP1?
Note: No issues with documents, which uploaded after upgrade.

Similar Messages

In iTunes 11.0.2.26, an Albums search by track names returns albums as if they only have one track on them, but I still want to access the entire album. How can I have the search results show the entire album (with just the searched for name highlighted)?

Hello, all.
In iTunes 11.0.2.26, an Albums search by track names returns albums as if they only have one track on them, but I still want to access the entire album. How can I have the search results show the entire album (with just the searched for name highlighted)? For instance, I'm wanting to play an album with a particular track on it or I'm searching for albums that include that track. iTunes incorrectly assumes that all I'm after is that one track and then incorrectly displays the album as if there is only one ttrack on it. This is a bonkers default setting. Can I change this?

Click the search magnifying glass and uncheck "Search entire library".
Type in the name of the track.
Click the album of interest to show tracks.
Select the track.
Press the X in the search box to clear the search.
Double click the track you want to start playing first.
tt2

Wep app search result show on the same product page(product large view).

I tried the web app search result show on the same product page.
e.g checking the postcode which built as web app on the product page, to check availability to ship the user's area.
so the result show on the same page(doesn't necessary to lose the product page), however the web app result doesn't show on the same product page.
There is only way i know is to link another page.
Anyone has done?

I have done something similar with simple jquery, by loading the results page within a div placed inside the details template.
By doing this I solved all my needs. In your case will work too as long as you only need to show information.

When I try to open a document from my file on Mac OS X the following message appears, with the Bluetooth logo: 'SELECT A BLUETOOTH DEVICE ....Select a device to send file ...' I then have to go to the source of the document, e.g. Pages, to open the file.

When I try to open a document from my file on Mac OS X the following message appears, with the Bluetooth logo: 'SELECT A BLUETOOTH DEVICE ....Select a device to send file ...' I then have to go to the source of the document, (e.g. Pages), to open the file. Please could someone help?

The Get Info dialog should look something like this:
The "Change All" button should be at the bottom of the "Open With" section. This is how it appears in Snow Leopard. Other OSX versions many be slightly different.
If something is changing the setting back to something else you may have a deeper problem than I am able to help you with. What is appearing in the Open with area before you correct it?
If the problem is still persisting, instead of double clicking on the file to open it, try right or control clicking and then select Open With and choose the proper app from the list.

Search results showing incorrect modified date

Hi All,
I have a one difficulty in search results.
Document showing incorrect modified date in search results. And this happens for one document only.
We have customized the search/results.aspx page, Our document is showing correct modified date in document properties,All Items.aspx like 31/4/2013.
But when i search with document name in search, result showing incorrect modified date like 24/6/2004.
I checked with database in SQL, every thing is fine.
I have updated the Modified date through powershell script for one document and after that this recent modified date is showing in search results.
But after updating the Modified date through powershell, issued document not showing the recent modified date in search results. still showing as 24/6/2004.
I should not do edit property and save, to create new version.
I don't know what is happening in search crawl. All ready full crawl running daily basis.
I want to check whether this issued document is crawling or not. Could anybody help me to get out of this. what is the main cause of this issue.
Thanks & Regards
MD.Liakath ali

Hi,
I'm seeing the same issue after upgrading the SharePoint 2010 to SharePoint 2013.
When I search any upgraded document in SharePoint 2013, the document's "Last Modified Date" was showing an incorrect value in Search Results page but other metadata of document like "Last Modified User" is showing the correct
value so the problem is not with document crawl, something wrong with Last Modified Date property in Search results.
I have seen below comment as answer but I didn't understand the solution to fix this issue for all upgraded documents.
The most likely cause is that there is metadata on the documents that is set to that date which is overriding the other dates in the search result. SharePoint isn't particulary imaginative so it's got to be finding that date from somewhere.
Do we have any solution for this issue? Is this issue will be addressed in SharePoint 2013 SP1?
Note: No issues with documents, which uploaded after upgrade.

SEARCH results - shows file name. Can I change this?

I am using TCS2 in Windows XP.
In Robohelp when you search the online help, it brings back the search results but they are displayed under the filename heading. Can I change that? I don't necessarily want my filename displayed to users... maybe the Chapter name?
TIA
-Adriana

Hi--
I have no solution yet but am having very much the same problem, and would like to get in on this conversation while I continue experimenting. I'm working TCS2 (Frame 9 and Robo 8), linking the Frame book to Robo to create CSH. I'm a long-time Framer but a newbie to Robo and TCS2.
As far as I can tell from reading through the thread, I've got some kind of variation going: some of my CSH Search results show the heading, and some show the filename. I haven't yet discovered what is the difference in the Frame file, although I believe that's where I'll find it. It's consistent from search to search. (That is, if it a topic shows up in Search results as the filename once, it does so consistently. Ditto others showing up as the heading.)
In addition to hereby signaling moral support (!) and an interest in a solution, I'd like to provide my settings here and see how yours compare.
The marker I created to manage output CSH filenames is "FileName." I'm working with engineers who are not native English speakers and have never implemented CSH. For the 30 or so (out of 75) topics that actually are going to be linked from the application, I created FileName marker text that starts with "LinkTo_<menupath>." (Example: "LinkTo_WebSecurity_ServerSecurityGroups_Adding.") The idea is to help them see what to link up where. (It also made editing map IDs faster: I just select and automap any topic name starting with LinkTo_.)
So I'm getting Search results that look like this:
Things to know about xyz
text text text...
LinkTo_Statistics_Events
text text text...
My "File > Project Settings > Edit conversion settings... > Other" settings are:
Context Sensitive Help Marker: blank
Topic Name Pattern: grayed out but is "(Default)"
Topic Name Marker: FileName
Not sure this is optimum. (As I said, a Robo newbie.) Also, my chapter titles and H1 thru H3 are set up to paginate, although I realized later that filling Topic Name Marker field disables pagination.
Thanks, will keep working on it --
Anne

The call was cancelled by the caller before the remote party answered

Hi,
We have a Lync 2010 Enterprise deployment in a single site with 2 FE and Mediation Server collocated.
When dialling a number from a PSTN phone the call gets routed via our PBX/PBX Gateway/Mediation Server/FE Server to the desktop Lync client successfully.
As soon as the user answers the call with the Lync client the call 'hangs' and terminates without hearing anything on either side.
The snooper logs show:
Error:
SIP/2.0 487 Request Terminated
Partial Content:
User-Agent: UCCAPI/4.0.7577.4398 OC/4.0.7577.4398 (Microsoft Lync 2010)
Ms-client-diagnostics: 52092;reason="The call was cancelled by the caller before the remote party answered"
Content-Length: 0
Please help?
Vinkie

What kind of gateway are you using to connect to your PBX and how? What is your media set to? G.711 μ-law or a-law? I'd check media settings there as a starting point.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".

A friend gave me an older Nano 3rd generation. Can anyone tell me how to delete what is on there and how to get rid of his name. It does not connect to my itunes. I cannot even find the source or the place to restore it as suggested in the owners manual.

I have a 3rd generation ipod that a friend gave me. I cannot find anything on how to get rid of his name and music on it. This is what the owners manual says:
"Select ipod nano in the soiurce list and click the summary tab" I cannot find the source or the summary tab on itunes. Can any one help me? I would like to delete everything on it and start over but I am afraid I cannot add anything back on it. I know this is detailed and a lot, but I really need help.

Restore
Note: Because Restore erases all of the songs and files on iPod, make sure toback up any files you've saved on the iPod disk. All of your songs, videos, podcasts, audiobooks, and games can be loaded back to your iPod provided that you have them stored in your iTunes Library.
How to restore your iPod:For Windows:
1. Make sure you've reinstalled the latest version of iTunes.
2. Open iTunes, and then connect your iPod to your computer.
3. After a few moments, it will appear in the source list in iTunes. If the iPod's display doesn't show "Connected" or "Do not disconnect" you may need to put the iPod into disk mode to proceed.
4. Select your iPod in the source list and you will see information about it appear in the Summary tab of the main iTunes windows.
5. Click the Restore button. You will be prompted with one or more restore options that may prompt iTunes to automatically download of the latest iPod Software. The 4 possible restore options are:
Restore Option 1: Restore - Restores with same iPod Software version already on iPod.
Restore Option 2: Use Same Version - Restores with same iPod Software version already on iPod even though a newer version is available.
Restore Option 3: Use Newest Version - Restores with the latest iPod Software on your computer.
Restore Option 4: Restore and Update - Restores with the latest iPod Software on your computer.
6. A progress bar will appear on the computer screen indicating that the first stage of the restore process has started. When this stage is completed, iTunes will instruct you to leave iPod connected to your computer to complete restore.
7. During the stage 2 of the restore process, the iPod will show an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remains connected to the computer or iPod Power adapter during this stage. Note: The progress bar may be difficult to see since the backlight on the iPod display may be off.
8. After stage 2 of the restore process is complete and the iPod is connected to the computer, the iTunes Setup Assistant window will appear asking you to name your iPod and choose your syncing preferences similar to when you connected your iPod for the first time.
For Mac:
1. Make sure you've reinstalled the latest version of iTunes.
2. Open iTunes, and then connect your iPod to your computer.
3. After a few moments, it will appear in the source list in iTunes. If the iPod's display doesn't show "Connected" or "Do not disconnect" you may need to put the iPod into disk mode to proceed.
4. Select your iPod in the source list and you will see information about it appear in the Summary tab of the main iTunes windows.
5. Click the Restore button. You will be prompted with one or more restore options that may prompt iTunes to automatically download of the latest iPod Software. The 4 possible restore options are:
Restore Option 1: Restore - Restores with same iPod Software version already on iPod.
Restore Option 2: Use Same Version - Restores with same iPod Software version already on iPod, even though a newer version is available.
Restore Option 3: Use Newest Version - Restores with latest iPod Software version on your computer.
Restore Option 4: Restore and Update - Restores with latest iPod Software version on your computer.
6. A message will appear prompting you to enter an administrator's name and password.
7. A progress bar will appear on the computer screen indicating that the first stage of the restore process has started. When this stage is completed, iTunes will instruct you to leave iPod connected to your computer to complete restore.
8. During the stage 2 of the restore process, the iPod will show an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remains connected to the computer or iPod Power adapter during this stage. Note: The progress bar may be difficult to see since the backlight on the iPod display may be off.
9. After stage 2 of the restore process is complete and the iPod is connected to the computer, the iTunes Setup Assistant window will appear asking you to name your iPod and choose your syncing preferences similar to when you connected your iPod for the first time.
Source:
iPod nano (3rd generation) Troubleshooting Assistant
Message was edited by: michael08081

How can we get the source of the page which is loaded on the browser using

Dear Sir,
How can we get the source of the page which is loaded on the browser using javascript
What is the exact path to get the source object in JS?
thanks & regards,
Sudheesh - INDIA

um... the document object?

How can I get a file to copy all of the files in a directory except itself and the source of the copy function will be the directory the final program is in?

How can I get a file to copy all of the files in a directory except itself and the source of the copy function will be the directory the final program is in? This application must be in Lab View 8.

you mean something like this (see below)?
Now you may have to implement code to check if the destination folder exists and to create it, etc. But if you use the Front Panel Control to select the destination folder, it should be okay.
Not the best implementation, mind you but you'll get the idea..
Message Edited by JoeLabView on 04-18-2007 03:43 PM
Attachments:
copy folder contents.PNG ‏10 KB

How can i say yes to automatic updates when they stop my wireless dlink to Virgin home broadband from getting on the internet and then i have to do a system restore to the day before the update to get it back to normal?!? Frustrated

how can i say yes to automatic updates when they stop my wireless dlink to Virgin home broadband from getting on the internet and then i have to do a system restore to the day before the update to get it back to normal?!? Frustrated
== This happened ==
Not sure how often
== automatic updates go on my computer, say if i click yes to update when shutting down

You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac

Timer works if I set the time before the current one

Hi,
I've got a block that is part of an actionListener that has 4 buttons, anyway I want the timer to execute something exactly at the time I set it.....but in the code that I have it also executes if i set the time before the current time
Here's the segmant:
private class ButtonResponder implements ActionListener
          public void actionPerformed(ActionEvent event)
                if (event.getSource() == exitButton)
                              System.exit(0);
               if(event.getSource() == setButton)
                    int hour = Integer.parseInt(hours[hourComboBox.getSelectedIndex()]);
                    int min = Integer.parseInt(minutes[minuteComboBox.getSelectedIndex()]);
                    Calendar calendar = Calendar.getInstance();
                    calendar.set(Calendar.HOUR_OF_DAY, hour);
                    calendar.set(Calendar.MINUTE, min);
                    calendar.set(Calendar.SECOND, 0);
                    Date time = calendar.getTime();
                timer = new java.util.Timer();
                    timer.schedule(new TimerTask()
                         public void run()
                              JOptionPane.showMessageDialog(null, "it is time");
                    , time, 5*1000);
               if (event.getSource() == cancelButton)
                    timer.cancel();
          }So if I put zeros in hours and minutes it will execute immediately....how can I make execute at the exact time (so that if the time now is 2:00 and I set it to 1:00 it only executes the next day??
Message was edited by:
Octavian

Bump the day if the time is less than current time.
Kaj

Determening which member of the array was the source of the event

Hi, I have an array that contains 5 panels, all five panels are registered to respond to mouse double-clicked event. I want to get the index number of the clicked panel in the array, but getSource() method wouldn't return it. Can anybody give me a hint on how can I do it?

Hi, I have an array that contains 5 panels, all five
panels are registered to respond to mouse
double-clicked event. I want to get the index number
of the clicked panel in the array, but getSource()
method wouldn't return it. Can anybody give me a hint
on how can I do it?
int clickedPanelNo = -1;
for(int panelNo = 0; panel < NoOfPanels; panelNo++) { // For each panel...
if(panelArray[panelNo].equals(theEvent.getSource())) { // If it's the source of the event
clickedPanelNo = panelNo; // Remember it
}Davide

Error in Data loading - The source of the fiscal year variant has changed

Hi All,
Need your kind suggestions to solve the issue.
I am trying gto load data from one cube to another. the base cube has data with 0CALDAY. in the next cube I am trying to derive 0FISCPER from 0CALDAY. But while loading I am getting this error.
The source of the fiscal year variant has changed
Could someone guide me.
Thanks in advance.

Hi Saugata,
nice to exchange views after a long time.
well, if u are sending data to the target cube which contains data for the separate financial entity of different finacial parameters like fiscal varient then u need to update global transfer settings, and then load data.
parhaps u also need to check the value of the Fiscal year varient to the target cube.
hope this helps.

How to see the source of the views - SPK

Generally view source can be feteched by the data dictionary user_views in which the field 'TEXT' is used to pop up the source of the query.
1) how could we see the entire query of the source from the field 'TEXT' as the data type of the field is 'LONG', So we can get only portion of the query.?
Please suggest a way to see the entire source of the view from the field 'TEXT'

SQL> set long 100000

Search results showing the source before the document title

Similar Messages

Maybe you are looking for