Search term 'CompanyID = 0' does not return the data I need.

Hi all,
I have implemented an integration to get data of Contact from Eloqua by SOAP APIs.
In my test data, some contacts have company information whose ID is 0 and some ID is 1. When using searchTerm 'CompanyID = 1', I could get the records whose Company ID is 1. But when using 'CompanyID = 0', 0 record(s) would be returned.
Is there anything special for the value 0?
Any suggestions?
Thanks,
Biao

Hi Dharmesh,
I tried other IDs greater than 0 and all work well.
My block issue now is that, I could find some Contacts with CompanyID 0 but there is no filter to select them out.
Any suggestions?
Thanks,
Biao

Similar Messages

When using rabbitmq-jms for vFabric RabbitMQ javax.jms.Message.getJMSDestination does not return the actual destination when it is received from a consumer listening on a Topic with a wild card

When using rabbitmq-jms for vFabric RabbitMQ javax.jms.Message.getJMSDestination does not return the actual destination when it is received from a consumer listening on a Topic with a wild card. I have tested with both 1.0.3 and 1.0.5 clients with RabbitMQ 3.1.5.
I was wondering if the community was aware of this problem and if there are any workarounds? If not what is the proper channel to file a bug report. An example code snippet is below. The test fails because the TextMessageMatcher expects the destination passed in on construction (second parameter) to equal the desination on the message received (aquired from getJMSDestination).
        Mockery context = new Mockery();
        final MessageListener messageListener = context.mock(MessageListener.class);
        final Latch latch = new LatchImpl();
        final String prefix = "test" + System.currentTimeMillis();
        context.checking(new Expectations() {
                oneOf(messageListener).onMessage(with(new TextMessageMatcher("MSG1", prefix + ".1234")));
                will(new CustomAction("release latch") {
                    @Override
                    public Object invoke(Invocation invocation) throws Throwable {
                        latch.unlatch();
                        return null;
        final Connection connection = createConnection(null, null);
        Session session = connection.createSession(false, Session.AUTO_ACKNOWLEDGE);
        connection.start();
        Topic wildcardTopic = (Topic) getInitialContext().lookup(prefix + "." + "#");
        Topic destination = (Topic) getInitialContext().lookup(prefix + ".1234");
        final MessageConsumer consumer = session.createConsumer(wildcardTopic);
        consumer.setMessageListener(messageListener);
        MessageProducer producer = session.createProducer(null);
        producer.send(destination, session.createTextMessage("MSG1"));
        latch.await(5000);
        connection.close();
        Thread.sleep(5);
        context.assertIsSatisfied();

Check where your MDB sends the [response] messages to.

LOV does not return the value (2)

PPR in general does not work correctly if invalid HTML is generated. One example of an invalid HTML is having an opening <TD> tag immediately following another opening <TD> tag.
After checking everything else, if LOV still does not return the value, test whether it's not a problem with the invalid HTML by placing the messageLovInput outside of the complicated layout nestings you may have. If it works outside of the layout nestings, look for the possible problems in the layout nestings.

Hi RamKumar,
Thanks for your reply.. I have already done that but no luck :(
Regards,
Hemanth J

When the program gets terminated unexpectedly (power failure, UPS fails), when I reopen it, it usually does NOT return the previous pages, as I have checked in the 'options' box,

# Question
When the program gets terminated unexpectedly (power failure, UPS fails), when I reopen it, it usually does NOT return the previous pages, as I have checked in the 'options' box, but goes to some random collection of pages often from months ago. Very frustrating - can anything be done to COMMAND it to save current pages and re-open there? (As I said, I have this box checked in the options, but it does not work ..

Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode?

RoadMap does not return the selected step on ESS 600 Record Time entry

RoadMap does not return the selected step on Record Time entry application in ESS. Is it suppose to behave similar way or is it suppose to take user to the selected step. If yes , then is there a setting or customization that i have to take care of, as its a standard SAP delivered ESS Record working time application.
Please let me know. I appreciate your help in advance.

Check with administrator in the src configuration thing,
Cheers,
Apparao

Error: 'BP category 1 does not fit the data in category 2'

Hi,
            i have written a program to create a contact person and the code for it is pasted below...when i run this program i get nothing but this message in the status bar 'BP category 1 does not fit the data in category 2'...can someone tell me wht the error means and y it is coming.
thanks:)
pushpa
*table for storing the line by line records in the excel file
TYPES: BEGIN OF TTAB,
        REC(1000) TYPE C,
       END OF TTAB.
DATA ITAB TYPE TABLE OF TTAB WITH HEADER LINE.
*variable for storing the name of the excel file to be uploaded
DATA UP_FILE TYPE STRING.
*data to be uploaded
TYPES: BEGIN OF TDAT,
        FLD1 TYPE BAPIBUS1006_CENTRAL_ORGAN-NAME1,
        FLD2 TYPE BAPIBUS1006_ADDRESS-STREET,
        FLD3 TYPE BAPIBUS1006_ADDRESS-CITY,
        FLD4 TYPE BAPIBUS1006_ADDRESS-REGION,
        FLD5 TYPE BAPIBUS1006_ADDRESS-POSTL_COD1,
        FLD6 TYPE BAPIBUS1006_ADDRESS-COUNTRY,
        FLD7 TYPE BAPIBUS1006_CENTRAL-PARTNEREXTERNAL,
       END OF TDAT.
DATA IDAT TYPE TABLE OF TDAT WITH HEADER LINE.
DATA: BUSINESSPARTNER TYPE BAPIBUS1006_HEAD-BPARTNER,
      CENTRALDATA TYPE BAPIBUS1006_CENTRAL,
      ORGANIZATION TYPE BAPIBUS1006_CENTRAL_ORGAN,
      ADDRESS TYPE BAPIBUS1006_ADDRESS,
      BAPIRETURN LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE.
PARAMETERS P_FILE TYPE LOCALFILE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
    EXPORTING
      STATIC    = 'X'
    CHANGING
      FILE_NAME = P_FILE.
START-OF-SELECTION.
UP_FILE = P_FILE.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                = UP_FILE
    TABLES
      DATA_TAB                = ITAB
    EXCEPTIONS
      FILE_OPEN_ERROR         = 1
      FILE_READ_ERROR         = 2
      NO_BATCH                = 3
      GUI_REFUSE_FILETRANSFER = 4
      INVALID_TYPE            = 5
      NO_AUTHORITY            = 6
      UNKNOWN_ERROR           = 7
      BAD_DATA_FORMAT         = 8
      HEADER_NOT_ALLOWED      = 9
      SEPARATOR_NOT_ALLOWED   = 10
      HEADER_TOO_LONG         = 11
      UNKNOWN_DP_ERROR        = 12
      ACCESS_DENIED           = 13
      DP_OUT_OF_MEMORY        = 14
      DISK_FULL               = 15
      DP_TIMEOUT              = 16
      OTHERS                  = 17.
*writing out the contents of the internal table itab
LOOP AT ITAB.
    WRITE:/ ITAB-REC.
    CLEAR IDAT.
    SPLIT ITAB-REC AT CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB
                INTO IDAT-FLD1 IDAT-FLD2 IDAT-FLD3 IDAT-FLD4 IDAT-FLD5 IDAT-FLD6 IDAT-FLD7.
    APPEND IDAT.
ENDLOOP.
LOOP AT IDAT.
    MOVE: IDAT-FLD1 TO ORGANIZATION-NAME1,
          IDAT-FLD2 TO ADDRESS-STREET,
          IDAT-FLD3 TO ADDRESS-CITY,
          IDAT-FLD4 TO ADDRESS-REGION,
          IDAT-FLD5 TO ADDRESS-POSTL_COD1,
          IDAT-FLD6 TO ADDRESS-COUNTRY,
          IDAT-FLD7 TO CENTRALDATA-PARTNEREXTERNAL,
          '0001' TO CENTRALDATA-PARTNERTYPE.
    CALL FUNCTION 'BAPI_BUPA_CREATE_FROM_DATA'
      EXPORTING
        PARTNERCATEGORY         = '1'
        CENTRALDATA             = CENTRALDATA
        CENTRALDATAORGANIZATION = ORGANIZATION
        ADDRESSDATA             = ADDRESS
      IMPORTING
        BUSINESSPARTNER         = BUSINESSPARTNER
      TABLES
        RETURN                  = BAPIRETURN.
    IF BAPIRETURN IS NOT INITIAL.
      READ TABLE BAPIRETURN INDEX 1.
      MESSAGE
        ID BAPIRETURN-ID
        TYPE BAPIRETURN-TYPE
        NUMBER BAPIRETURN-NUMBER
        WITH BAPIRETURN-MESSAGE_V1
        BAPIRETURN-MESSAGE_V2
        BAPIRETURN-MESSAGE_V3
        BAPIRETURN-MESSAGE_V4.
      EXIT.
    ENDIF.
    REFRESH BAPIRETURN.
    CLEAR BAPIRETURN.
    CALL FUNCTION 'BAPI_BUPA_ROLE_ADD'
      EXPORTING
      BUSINESSPARTNER = BUSINESSPARTNER
      BUSINESSPARTNERROLE = 'BUP001'
      DIFFERENTIATIONTYPEVALUE =
      TABLES
      RETURN = BAPIRETURN.
    IF BAPIRETURN IS NOT INITIAL.
      READ TABLE BAPIRETURN INDEX 1.
      MESSAGE
        ID BAPIRETURN-ID
        TYPE BAPIRETURN-TYPE
        NUMBER BAPIRETURN-NUMBER
        WITH BAPIRETURN-MESSAGE_V1
        BAPIRETURN-MESSAGE_V2
        BAPIRETURN-MESSAGE_V3
        BAPIRETURN-MESSAGE_V4.
      EXIT.
    ENDIF.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    WRITE:/ 'Business Partner ID:', BUSINESSPARTNER.
ENDLOOP.

Hi Pushpa,
         you can use following code to create relationships using BAPI. In this Business partner is organisatin. contact persion paramenter is person. other information related to relationship details
CALL FUNCTION 'BAPI_BUPR_CONTP_CREATE'
    EXPORTING
      BUSINESSPARTNER           = SEARCH_PARTNER
      CONTACTPERSON             = CONTACT_SAP
VALIDFROMDATE             = '00010101'
VALIDUNTILDATE            = '99991231'
DEFAULTRELATIONSHIP       =
ADDRESSGUID               =
      CENTRALDATA             = WA_CENTRAL_DATA
      ADDRESSDATA             = WA_ADDR_DATA
      TABLES
    BAPIADTEL                 = I_TEL_DATA
    BAPIADFAX                 = I_FAX_DATA
BAPIADTTX                 =
BAPIADTLX                 =
    BAPIADSMTP                = I_EMAIL_DATA
BAPIADRML                 =
BAPIADX400                =
BAPIADRFC                 =
BAPIADPRT                 =
BAPIADSSF                 =
BAPIADURI                 =
BAPIADPAG                 =
BAPIAD_REM                =
BAPICOMREM                =
     RETURN                    = I_RETURN
hope this will help you
Siva

Any idea what this errorr means? the data type of the reference does not match the data type of the variable

I am using Veristand 2014, Scan Engine and EtherCat Custom Device. I have not had this error before, but I was trying to deploy my System Definition File (run) to the Target (cRio 9024 with 6 modules) and it failed. It wouldn't even try to communicate with the target. I get the 'connection refused' error.
I created a new Veristand project
I added the Scan Engine and EtherCat custom device.
I changed the IP address and auto-detected my modules
i noticed tat Veristand didn't find one of my modules that was there earlier. (this week)
So, i went to NiMax to make sure software was installed and even reinstalled Scan Engine and Veristand just to make sure.
Now, it finds the module, but when i go to deploy it getsto the last step of deploying the code to the target, and then it fails.
Any thoughts?
Start Date: 4/10/2015 11:48 AM
• Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
• Initializing TCP subsystem...
• Starting TCP Loops...
• Connection established with target Controller.
• Preparing to synchronize with targets...
• Querying the active System Definition file from the targets...
• Stopping TCP loops.
Waiting for TCP loops to shut down...
• TCP loops shut down successfully.
• Unloading System Definition file...
• Connection with target Controller has been lost.
• Start Date: 4/10/2015 11:48 AM
• Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
• Preparing to deploy the System Definition to the targets...
• Compiling the System Definition file...
• Initializing TCP subsystem...
• Starting TCP Loops...
• Connection established with target Controller.
• Sending reset command to all targets...
• Preparing to deploy files to the targets...
• Starting download for target Controller...
• Opening FTP session to IP 10.12.0.48...
• Processing Action on Deploy VIs...
• Setting target scan rate to 10000 (uSec)... Done.
• Gathering target dependency files...
• Downloading testChassis.nivssdf [92 kB] (file 1 of 4)
• Downloading testChassis_Controller.nivsdat [204 kB] (file 2 of 4)
• Downloading CalibrationData.nivscal [0 kB] (file 3 of 4)
• Downloading testChassis_Controller.nivsparam [0 kB] (file 4 of 4)
• Closing FTP session...
• Files successfully deployed to the targets.
• Starting deployment group 1...
The VeriStand Gateway encountered an error while deploying the System Definition file.
Details:
Error -66212 occurred at Project Window.lvlibroject Window.vi >> Project Window.lvlib:Command Loop.vi >> NI_VS Workspace ExecutionAPI.lvlib:NI VeriStand - Connect to System.vi
Possible reason(s):
LabVIEW: The data type of the reference does not match the data type of the variable.
=========================
NI VeriStand: NI VeriStand Engine.lvlib:VeriStand Engine Wrapper (RT).vi >> NI VeriStand Engine.lvlib:VeriStand Engine.vi >> NI VeriStand Engine.lvlib:VeriStand Engine State Machine.vi >> NI VeriStand Engine.lvlib:Initialize Inline Custom Devices.vi >> Custom Devices Storage.lvlib:Initialize Device (HW Interface).vi
• Sending reset command to all targets...
• Stopping TCP loops.
Waiting for TCP loops to shut down...
• TCP loops shut down successfully.
• Unloading System Definition file...
• Connection with target Controller has been lost.

Can you deploy if you only have the two 9401 modules in the chassis (no other modules) and in the sysdef? I meant to ask if you could attach your system definition file to the forum post so we can see it as well (sorry for the confusion).
Are you using any of the specialty configurations for the 9401 modules? (ex: counter, PWM, quadrature, etc)
You will probably want to post this on the support page for the Scan Engine/EtherCAT Custom Device: https://decibel.ni.com/content/thread/8671
Custom devices aren't officially supported by NI, so technical questions and issues are handled on the above page.
Kevin W.
Applications Engineer
National Instruments

"BP Category 1 does not fit the data in category 2" "Replies Appreciated"

Hi Gurus,
When i am trying to create an "Individual Account" in UI, I am getting the error "BP Category 1 does not fit the data in category 2".
If i try to create a "group" then it says "BP Category 3 does not fit the data in category 2".
It allows me to create only "Corporate Account" i..e. Category 2.
What should i do to create "Individual Account" and "Group". (Category1 & Category 3).
Individual Account (Category 1) - "BP Category 1 does not fit the data in category 2".
Corporate Account (Category 2) - Able to create only Corporate Account
Group (Category 3) - "BP Category 3 does not fit the data in category 2".
Thanks & Regards
Rohan

Hi Rohan,
Hope this SAP Note : 1232459, Solves your problem.
You might have created a custom configuration for corporate accounts.
Unfortunately in case of custom configurations exist, they are selected with higher priority.
So in this case the configuration for corporate accounts is also shown for individual accounts,
this causes error.
In order to solve this problem, create a custom configuration for individual account also,
i.e for view BP_HEAD/AccountDetails. Object type BP_ACCOUNT and object subtype INDIVIDUAL.
Please make sure that the custom configuration includes the fields firstname and lastname for
persons instead of name1 and name2 which are only allowed for corporate accounts.
I hope the above information resolves your problem.
Best Regards
Shiven

CRM 2007 IC : error "BP category 2 does not fit the data in category 1"

Hi Guys,
When I am trying to save the data on the Bupacreate page it gives the error as follows.
"BP category 2 does not fit the data in category 1".
Can anyone suggest what is causing this error to happen and how this error can be corrected.
thanks & regards
Sandy

Hi,
This error usually occrus when you try to set field in without specifing bptype ie person, group etc. In our scenario we were trying to set field in Person which was not present in group. but since do_prepare_output method is same in both, that feild was getting set for group as well. When we placed restriction this error got removed.
Best regards
Pankaj Kumar

Text box does not display the date??

I have a text box <input type="TEXT" name="invoiceDate" readonly></input>. I select the date using datepicker .The date gets displayed in the text box.Then i click on "Show" button which loads the same jsp page again.
When the page is loaded the text box does not show the date.
I try to save the date in the text box as
<% String date1=request.getParameter("invoiceDate");
<input type="hidden" name="date1" value="<%=date1 %>">
<%>
The value is saved in this hidden variable..
Plz help me what to do next
Thanks

Its a hidden field and that's why it isnt displayed.
Use
<input type="text" name="date1" value="<%=date1 %>"> ram.

Installer could not locate the data it needed... Entourage 2008

Hi, I'm a bit of newbie to Mac's... I am trying to work out why a copy of Entourage 2008 I have wont install... I have posted on the Mactopia forums but with no success, so I thought I would try here, as I am not sure if it is an Entourage/Microsoft issue or a Mac OS issue. Every time I try to install my downloaded e2008.iso (came with my Exchange server rental) I get the following error: "Install Failed. The installer could not locate the data it needed to install the software. Check your install media or internet connection and try again or contact the software manufacturer for assistance". I am assured that the download I have is complete and 'verified'. When I double click the .iso file, it mounts and then opens - i then click through 'Office Installer_mpkg / contents / distribution.dist to begin the install. If anyone has any advice on what I might be doing wrong I would appreciate it! Thanks.

Thanks - it is reputable (should be...) as it is from the company i get my exchange server rental through, part of the 'package' is a download of entourage or outlook. Unfortunately they do not offer very good mac support... Have gone back to them to make it their problem! thanks all the same.

Discovery seach does not return the correct messages

We're trying to produce what I thought would be simple reports on the entire mail database. We have a simple single Exch2010 box. When using the discovery search tool, it is returning WAY too much of the wrong info. I just want to put in keywords, restrict
the FROM to a single @domain.com and limit by date. It seems like the tool would do such a simple thing, but it doesn't seem to filter out on the FROM at all. It just does the keywords and dates. Without the limit on the From domain there are thousands of
incorrect hits.
I have the latest CU's, the user is definitely part of the discovery role group, it works on just keywords, but its just spewing all kinds of useless information. Anyone have any ideas? I really don't use powershell and would prefer not to since I have a
bunch of these to do in various options, but I can't trust the data.
Curt Kessler - FLC

Hi Curt,
To know more about the issue, could you please let me know the search query you specified which give unexpected result? Since you mentioned you don’t want to use shell, are you using ECP? When
perform the search, how did you specify the “Keywords” and “Messages To or From Specific E-mail Address”? Which mailbox did you use as the destination mailbox to store the search result?
I recommend not choose the “Include items that can’t be searched” and “Enable deduplication” option. Please try again and give me a screenshot of the result
if still other emails from other senders appear in the search result. Please set the keywords as format
“Keywords”1 AND (“Keywords2” OR “Keywords3”)
Note: If we only specify one keywords, what’s the result? Please test and check.
Meanwhile, to narrow down the issue, it’s recommend to use shell to search, it’s useful to test the issue and verify if the same result using the same search queries and still emails form other
senders appear. For example:
New-MailboxSearch -Name "Search-20140307" -TargetMailbox “Target mailbox to store the search result” -StartDate "01/01/2014" -EndDate "03/07/2014" -Senders "sender
email address or domain name" -SearchQuery "search keywords" -ExcludeDuplicateMessages
For more information about discovery search, we can refer to the following articles:
Title: Mailbox Search
Link1:
http://technet.microsoft.com/en-us/library/dd298064(v=exchg.141).aspx
Link2:
http://technet.microsoft.com/en-us/library/dd335072(v=exchg.141).aspx#PDS
Link3:
http://www.msexchange.org/articles-tutorials/exchange-server-2010/compliance-policies-archiving/managing-multi-mailbox-search-exchange-server-2010-part2.html
Regards, Eric Zou

DATE type returned from function does not return the time component

Hi,
I'm dealing with a strange problem. I have a PL/SQL function (running on Oracle 8.1.4.7) which returns a DATE value. Like we all know the DATE datatype includes a date component and a time component.
The function I used for testing is like this:
FUNCTION ReturnDate return Date is
dReturn Date;
Begin
select sysdate into dReturn from dual;
return dReturn;
end ReturnDate;
When I call this function from .NET using ODP.NET the date value I get does not have the time component included only the day-month-year components.
This is a code-snippet that calls the function :
command.CommandText="Schema.ReturnDate";
command.CommandType=CommandType.StoredProcedure;
command.Parameters.Add("Return_Value",
OracleDbType.Date,0,ParameterDirection.ReturnValue);
command.ExecuteNonQuery();
I use the OracleDbType.Date type which I think is the most logical choice, because the type in the Database is after all DATE.
However this does not include the time componet. But if I change the OracleDbType.Date to OracleDbType.TimeStamp I get the time component. I'm not happy with this "hack" because I'm not sure what will happen when we upgrade our version of the Database to Oracle 9i which uses the new TimeStamp datatype.
Is this a bug that the OracleDbType.Date does not include the time component??

How do you examine the output Date value?
If it is from the string, then the time components will
not show because the NLS_DATE format in the client
machine does not contain the time components.
In American, the Date format is 'DD-MON-RR' by default whereas, the TimeStamp format is 'DD-MON-RR HH.MI.SSXFF AM' by default.
Can you take a look at the time components from the OracleDate by accessing the time properties, eg. OracleDate.Hour, OracleDate.Minute..etc to see if the time values are there?
Thanks
Martha

Toplink does not return the object sometimes - VeryHigh Volume application

Hi All,
Toplink version: 10.1.3.4, OAS 10.1.3.4, Oracle 10g, RedHat linux 4.0
We have a high volume application where toplink issues one of our queries like 25K times/hour.Query is a simple one querying the table based on the primary key(Id) that should return 1 object.
This query is not returning the object sometimes I should say like 200 times/hour. What bothers me is that the same query on the same Id(primary-key) returns the object another time.
I did enable the toplink logging level to FINE where I could see the SQL query getting issued to the DB, I was unsuccessful in changing the logging level to ALL to check if the object is getting returned by the toplink layer and being registered in the cache kind of details.
This is not easily re-producable as this only occurs in our Pre-Prod environment where we can simulate high volume. This completely baffles me and I am running out of ideas.
Thanks in advance.
-Ram
Edited by: Raam on Jun 4, 2009 7:41 PM

If you are configured for an isolated cache then there should be no concurrency issues. Each thread will query the database directly and load the object into the UnitOfWork. Is there an Exception handler configured on TopLink? Are you getting a timeout exception or some other exception that is being ignored?
--Gordon

Binocular search for Cost Center is not returning any data

Hi Gurus,
When clicking on the SRM-Shooping Cart-Cost Assignment- Account Assignment Overview- Cost center Binocular search icon, it is not returning any data. However, when drilling down in the Account Assignment Overview, you will see another Binocular search icon for Cost Center which is working fine.
Any idea of how you troubleshoot it.
Thanks in advace for your help.
HA

Not sure about the cost assignment drill down, but after we applied SP13 to SRM server 550 the binoculars for cost center stopped working. the following note corrected this.
Note 1259735 - Search help of generic account does not work
If it has never worked, then probably need to setup a RFC dialog user for the F4 search help, Multiple threads on here around the dialog user for F4 with details on configuration and use.
JF

Search term 'CompanyID = 0' does not return the data I need.

Similar Messages

Maybe you are looking for