Searching by Criteria: what are the keywords?

I want to search for files using just criteria (created, last opened, etc.), without regard to file name or contents.
It works putting "created:>10/1/2007" into the search box (finder or spotlight). I couldn't get it to find by "Last opened:>10/1/2007". I finally figured out it was "last opened date:>10/1/2007".
I can't find any comprehensive list of what the keywords are for metadata. Is there such a thing?
Also, I think there is an error in the help file for spotlight. It says:
"author:tom AND author:thom searches for items authored by Tom and Thom, in case you don’t know the exact spelling of his name"
I think the AND should be an OR. I don't think you'd get ANY result from the search shown.
There needs to be a thorough discussion of searching somewhere. It's an absolutely fabulous feature, but needs abit more documentation I think.

You're going to have to ask your e-mail provider. We don't have the slightest clue who that is, much less what the correct settings would be.

Similar Messages

What are the pros and cons of using people keywords, given that my catalogue is already uptodate with regular keywording of all subjects? e.g., will the people keyword transfer to other programs?, can I use the same name for a people keyword and regular

What are the pros and cons of using people keywords, given that my catalog is already up to date with regular keywording of all subjects? e.g., will the people keyword transfer to other programs?, can I use the same name for a people keyword and regular keyword in the same photo?

What are the pros and cons of using people keywords, given that my catalog is already up to date with regular keywording of all subjects? e.g., will the people keyword transfer to other programs?, can I use the same name for a people keyword and regular keyword in the same photo?

What are the possibilities and limitation of using Out of the box content search webpart on SharePoint Online 2013/O365 ?

Hi All,
We are migrating from on-premise SharPoint 2010 to SharePoint online 2013.
I have few questions below:
What are the possibilities and limitations of using Out of the box content search webpart?
Also, how the cross site publishing will work in SharePoint online something with managed navigations and product catalog apporach? if it is not supported, then what are the alternatives to acheive the same?
Appriciate any commnets/clarifications.Thanks in advance.
Thanks,
Dhananjay.

Here are the possibilities of Content search webparts
http://office.microsoft.com/en-in/office365-sharepoint-online-enterprise-help/configure-a-content-search-web-part-in-sharepoint-HA104119042.aspx
http://office.microsoft.com/en-in/office365-sharepoint-online-enterprise-help/when-to-use-the-content-query-web-part-or-the-content-search-web-part-in-sharepoint-HA104206662.aspx
Compare the strengths and limitations of the Web Parts
It’s important that you understand the strengths and limitations of the two Web Parts because if you choose the wrong one, your site could run into performance problems. You can use both Web Parts to show content that is based on a query. In a simplified
world, here’s how you can decide between the two:
Use the CQWP when you have a limited amount of content, your query is simple, and you don’t expect your content to grow much in the future.
Use the CSWP in all other scenarios when you want to show content that is based on a query.
The table below gives a comparison of the two Web Parts:
Web Part behavior
Content Query Web Part
Content Search Web Part
Query configuration
Easy
You’ll need to know about certain search features such as
managed properties.
Query across large amounts of content
Limited
Yes
Handle complex queries
Limited
Yes
Scale to handle future content growth
Limited
Yes
Display content from other site collections
No
Yes (see
section below)
Design of query results can be customized
Yes, by using XSLT.
Yes, by using HTML.
Maintenance cost in a complex site architecture
High
Small (see
section below)
Narrow down the query results that are displayed in the Web Part
No
Yes, in combination with the
Refinement Web Part.
It was not there previously but then it was added to Office 365
http://blogs.office.com/2013/10/29/search-innovations-for-site-and-portal-design-in-sharepoint-online/
If this helped you resolve your issue, please mark it Answered

What are the criterias for supporting the Cisco AP1242?

I need to support and configure the Cisco APs. May I ask what are the additional certificates that I need other than CCNA in order to support the APs.

There are carious certification that might help. For one, the CCNA hs some wireless... you will need a background on basic route switch. Lke mentione earlier, the CCNA for wireless should have alot of information. these certifications just don't cover the 1242's. They cover RF, autonomous, LWAPP. antenna gain and power.... all the other goodies that can help you troubleshoot issues better.

Does anyone know what does the keyword section do?

Does anyone know what does the keyword section do? Under "Any of the webpages -> Properties -> Basic tab -> Tags/Keywords"?
Is it used for part of the google search?

Its tagging (Classification), one of the bright feature of any content management system. It allows author to classify the content in system. There are various advantages but i would refer you to go through http://dev.day.com/docs/en/cq/current/wcm/tag_admin.html. Apart from that you can search in google as well to find relative information about classification in content management system.

What are the steps to optimise ABAP code

What are the steps to optimise ABAP code, that is how to increase the performance of a code?

Hi
Welcome to SDN forum
1) Dont use nested select statements
2) If possible use for all entries in addition
3) In the where addition make sure you give all the primary key
4) Use Index for the selection criteria.
5) You can also use inner joins
6) You can try to put the data from the first select statement into an Itab and then in order to select the data from the second table use for all entries in.
7) Use the runtime analysis SE30 and SQL Trace (ST05) to identify the performance and also to identify where the load is heavy, so that you can change the code accordingly
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d0db4c9-0e01-0010-b68f-9b1408d5f234
ABAP performance depends upon various factors and in devicded in three parts:
1. Database
2. ABAP
3. System
Run Any program using SE30 (performance analys) to improve performance refer to tips and trics section of SE30, Always remember that ABAP perfirmance is improved when there is least load on Database.
u can get an interactive grap in SE30 regarding this with a file.
also if u find runtime of parts of codes then use :
Switch on RTA Dynamically within ABAP Code
*To turn runtim analysis on within ABAP code insert the following code
SET RUN TIME ANALYZER ON.
*To turn runtim analysis off within ABAP code insert the following code
SET RUN TIME ANALYZER OFF.
Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
Avoid for all entries in JOINS
Try to avoid joins and use FOR ALL ENTRIES.
Try to restrict the joins to 1 level only ie only for tables
Avoid using Select *.
Avoid having multiple Selects from the same table in the same object.
Try to minimize the number of variables to save memory.
The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
Avoid creation of index as far as possible
Avoid operators like <>, > , < & like % in where clause conditions
Avoid select/select single statements in loops.
Try to use 'binary search' in READ internal table. Ensure table is sorted before using BINARY SEARCH.
Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
Avoid using ORDER BY in selects
Avoid Nested Selects
Avoid Nested Loops of Internal Tables
Try to use FIELD SYMBOLS.
Try to avoid into Corresponding Fields of
Avoid using Select Distinct, Use DELETE ADJACENT
Check the following Links
Re: performance tuning
Re: Performance tuning of program
http://www.sapgenie.com/abap/performance.htm
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
check the below link
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
See the following link if it's any help:
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
Check also http://service.sap.com/performance
and
books like
http://www.sap-press.com/product.cfm?account=&product=H951
http://www.sap-press.com/product.cfm?account=&product=H973
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
Performance tuning for Data Selection Statement
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
Debugger
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
Run Time Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617cafe68c11d2b2ab080009b43351/content.htm
SQL trace
http://help.sap.com/saphelp_47x200/helpdata/en/d1/801f7c454211d189710000e8322d00/content.htm
CATT - Computer Aided Testing Too
http://help.sap.com/saphelp_47x200/helpdata/en/b3/410b37233f7c6fe10000009b38f936/frameset.htm
Test Workbench
http://help.sap.com/saphelp_47x200/helpdata/en/a8/157235d0fa8742e10000009b38f889/frameset.htm
Coverage Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c7/af9a79061a11d4b3d4080009b43351/content.htm
Runtime Monitor
http://help.sap.com/saphelp_47x200/helpdata/en/b5/fa121cc15911d5993d00508b6b8b11/content.htm
Memory Inspector
http://help.sap.com/saphelp_47x200/helpdata/en/a2/e5fc84cc87964cb2c29f584152d74e/content.htm
ECATT - Extended Computer Aided testing tool.
http://help.sap.com/saphelp_47x200/helpdata/en/20/e81c3b84e65e7be10000000a11402f/frameset.htm
Just refer to these links...
performance
Performance
Performance Guide
performance issues...
Performance Tuning
Performance issues
performance tuning
performance tuning
You can go to the transaction SE30 to have the runtime analysis of your program.Also try the transaction SCI , which is SAP Code Inspector.
1 Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
2 Avoid for all entries in JOINS
3 Try to avoid joins and use FOR ALL ENTRIES.
4 Try to restrict the joins to 1 level only ie only for 2 tables
5 Avoid using Select *.
6 Avoid having multiple Selects from the same table in the same object.
7 Try to minimize the number of variables to save memory.
8 The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
9 Avoid creation of index as far as possible
10 Avoid operators like <>, > , < & like % in where clause conditions
11 Avoid select/select single statements in loops.
12 Try to use 'binary search' in READ internal table. Ensure table is sorted before using BINARY SEARCH.
13 Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
14 Avoid using ORDER BY in selects
15 Avoid Nested Selects
16 Avoid Nested Loops of Internal Tables
17 Try to use FIELD SYMBOLS.
18 Try to avoid into Corresponding Fields of
19 Avoid using Select Distinct, Use DELETE ADJACENT.
Reward points for useful Answers
Regards
Anji

What are the opprtunities in Australia

Hey Guys,
Can someone tell me what are the opportunities available for EBS consultants in Australia.
Especially in Inventory and Purchasing....I'm also into Financials as well.
Thanks.

Dear User,
The first and fast way to search the job opening is "www.google.com" keyword "australia + job site + oracle ebs"
Hope this will help
Thanks
Regards,
Taj

What are the major components in class?

1)     What is the purpose of load-of-program? When it will be trigger?
2)     Write the code for displaying the three parameters in single line with the first parameter as mandatory in the selection screen?
3)     Which event triggered whenever the user call the function BACK, EXIT, CANCEL?
4)     What are the major components in class?
5)     What is the functional module is used to get popup screen for ALV reports?
6)     Which type of pool is used to get drop-down list?
7)     What is the tcode for creating the variant truncations?
8)     Is it possible to call LDBs number of times in same report?
9)     What are the conditions to use control break statements in our report program?
10)     What is the use of range statement?
11)     What is the difference between normal reports and alv reports? With comparing to normal report are there any disadvantages in alv reports?
12)     What are the components used to suppress the fields in the selection-screen?
13)     What is the standard program to transport selection screen variants?
14)     What is the event keyword for defining event block for reporting events?
15)     What is the specific statement use when writing a drill down report?
16)     What are the different tools to report data in sap?
17)     Write the menu path to create a selection text in reports?
18)     How do we omit the leading zero s while formatting outputs in reports?
19)     What are the report truncations?
20)     How do we align selection input in single row?
21)     How do we suppress the display of input fields on selection screen?

this forum is not for answering your interview questions...if you stucked with any realtime problem then post...please try to respect forum terms and conditions.
Thank you.

What is vendor performance report what are the fields using in the report

What is vendor performance report what are the fields using in the report and i need some sample reports for that particular topic (clasical report)not using any alvs or any advance topics.
U R Satish Patnaik

hi
good
*"Table declarations...................................................
TABLES:
EKKO, " Purchasing Document Header
CDHDR, " Change document header
SSCRFIELDS. " Fields on selection screens
*"Selection screen elements............................................
SELECT-OPTIONS:
S_EBELN FOR EKKO-EBELN, " Purchasing Document Number
S_LIFNR FOR EKKO-LIFNR, " Vendor's account number
S_EKGRP FOR EKKO-EKGRP, " Purchasing group
S_BEDAT FOR EKKO-BEDAT, " Purchasing Document Date
S_UDATE FOR CDHDR-UDATE. " Creation date of the change
" document
*" Data declarations...................................................
Field String to hold Purchase Document Number *
DATA:
BEGIN OF FS_EBELN,
EBELN(90) TYPE C, " Purchase Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created
" the Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
END OF FS_EBELN,
Field String to hold Purchase Document Header *
BEGIN OF FS_EKKO,
EBELN TYPE EKKO-EBELN, " Purchasing Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created the
" Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
END OF FS_EKKO,
Field String to hold Account Number and name of the Vendor *
BEGIN OF FS_LFA1,
LIFNR TYPE LFA1-LIFNR, " Account Number of Vendor
NAME1 TYPE LFA1-NAME1, " Name1
END OF FS_LFA1,
Field String to hold Change date and the name of the user *
BEGIN OF FS_CDHDR,
OBJECTCLAS TYPE CDHDR-OBJECTCLAS, " Object Class
OBJECTID TYPE CDHDR-OBJECTID, " Object value
CHANGENR TYPE CDHDR-CHANGENR, " Document change number
USERNAME TYPE CDHDR-USERNAME, " User name
UDATE TYPE CDHDR-UDATE, " Creation date of the change
" document
END OF FS_CDHDR,
Field String to hold Change document items *
BEGIN OF FS_CDPOS,
OBJECTCLAS TYPE CDPOS-OBJECTCLAS," Object class
OBJECTID(10) TYPE C, " Object Value
CHANGENR TYPE CDPOS-CHANGENR, " Document change number
TABNAME TYPE CDPOS-TABNAME, " Table Name
FNAME TYPE CDPOS-FNAME, " Field Name
VALUE_NEW TYPE CDPOS-VALUE_NEW, " New contents of changed field
VALUE_OLD TYPE CDPOS-VALUE_OLD, " Old contents of changed field
END OF FS_CDPOS,
Field String to hold Date Element Name *
BEGIN OF FS_DATAELE,
TABNAME TYPE DD03L-TABNAME, " Table Name
FIELDNAME TYPE DD03L-FIELDNAME, " Field Name
ROLLNAME TYPE DD03L-ROLLNAME, " Data element (semantic domain)
END OF FS_DATAELE,
Field String to hold Short Text of the Date Element *
BEGIN OF FS_TEXT,
ROLLNAME TYPE DD04T-ROLLNAME, " Data element (semantic domain)
DDTEXT TYPE DD04T-DDTEXT, " Short Text Describing R/3
" Repository Objects
END OF FS_TEXT,
Field String to hold data to be displayed on the ALV grid *
BEGIN OF FS_OUTTAB,
EBELN TYPE EKKO-EBELN, " Purchasing Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created the
" Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
WERKS TYPE LFA1-WERKS, " Plant
NAME1 TYPE LFA1-NAME1, " Name1
USERNAME TYPE CDHDR-USERNAME, " User name
UDATE TYPE CDHDR-UDATE, " Creation date of the change
" document
DDTEXT TYPE DD04T-DDTEXT, " Short Text Describing R/3
" Repository Objects
VALUE_NEW TYPE CDPOS-VALUE_NEW, " New contents of changed field
VALUE_OLD TYPE CDPOS-VALUE_OLD, " Old contents of changed field
END OF FS_OUTTAB,
Internal table to hold Purchase Document Number *
T_EBELN LIKE STANDARD TABLE
OF FS_EBELN,
Internal table to hold Purchase Document Header *
T_EKKO LIKE STANDARD TABLE
OF FS_EKKO,
Temp Internal table to hold Purchase Document Header *
T_EKKO_TEMP LIKE STANDARD TABLE
OF FS_EKKO,
Internal table to hold Account number and Name of the Vendor *
T_LFA1 LIKE STANDARD TABLE
OF FS_LFA1,
Internal Table to hold Change date and the name of the user *
T_CDHDR LIKE STANDARD TABLE
OF FS_CDHDR,
Internal Table to hold Change document items *
T_CDPOS LIKE STANDARD TABLE
OF FS_CDPOS,
Temp. Internal Table to hold Change document items *
T_CDPOS_TEMP LIKE STANDARD TABLE
OF FS_CDPOS,
Internal Table to hold Data Element Name *
T_DATAELE LIKE STANDARD TABLE
OF FS_DATAELE,
Temp. Internal Table to hold Data Element Name *
T_DATAELE_TEMP LIKE STANDARD TABLE
OF FS_DATAELE,
Internal Table to hold Short Text of the Date Element *
T_TEXT LIKE STANDARD TABLE
OF FS_TEXT,
Internal Table to hold data to be displayed on the ALV grid *
T_OUTTAB LIKE STANDARD TABLE
OF FS_OUTTAB.
C L A S S D E F I N I T I O N *
CLASS LCL_EVENT_HANDLER DEFINITION DEFERRED.
*" Data declarations...................................................
Work variables *
DATA:
W_EBELN TYPE EKKO-EBELN, " Purchasing Document Number
W_LIFNR TYPE EKKO-LIFNR, " Vendor's account number
W_EKGRP TYPE EKKO-EKGRP, " Purchasing group
W_VALUE TYPE EKKO-EBELN, " Reflected Value
W_SPACE VALUE ' ', " Space
W_FLAG TYPE I, " Flag Variable
W_VARIANT TYPE DISVARIANT, " Variant
*--- ALV Grid
W_GRID TYPE REF TO CL_GUI_ALV_GRID,
*--- Event Handler
W_EVENT_CLICK TYPE REF TO LCL_EVENT_HANDLER,
*--- Field catalog table
T_FIELDCAT TYPE LVC_T_FCAT.
AT SELECTION-SCREEN EVENT *
AT SELECTION-SCREEN ON S_EBELN.
Subroutine to validate Purchase Document Number.
PERFORM VALIDATE_PD_NUM.
AT SELECTION-SCREEN ON S_LIFNR.
Subroutine to validate Vendor Number.
PERFORM VALIDATE_VEN_NUM.
AT SELECTION-SCREEN ON S_EKGRP.
Subroutine to validate Purchase Group.
PERFORM VALIDATE_PUR_GRP.
START-OF-SELECTION EVENT *
START-OF-SELECTION.
Subroutine to select all Purchase orders.
PERFORM SELECT_PO.
CHECK W_FLAG EQ 0.
Subroutine to select Object values.
PERFORM SELECT_OBJ_ID.
CHECK W_FLAG EQ 0.
Subroutine to select Changed values.
PERFORM SELECT_CHANGED_VALUE.
CHECK W_FLAG EQ 0.
Subroutine to Select Purchase Orders.
PERFORM SELECT_PUR_DOC.
Subroutine to select Vendor Details.
PERFORM SELECT_VENDOR.
Subroutine to select Text for the Changed values.
PERFORM DESCRIPTION.
END-OF-SELECTION EVENT *
END-OF-SELECTION.
IF NOT T_EKKO IS INITIAL.
Subroutine to populate the Output Table.
PERFORM FILL_OUTTAB.
Subroutine to build Field Catalog.
PERFORM PREPARE_FIELD_CATALOG CHANGING T_FIELDCAT.
CALL SCREEN 100.
ENDIF. " IF NOT T_EKKO...
CLASS LCL_EVENT_HANDLER DEFINITION
Defining Class which handles events
CLASS LCL_EVENT_HANDLER DEFINITION .
PUBLIC SECTION .
METHODS:
HANDLE_HOTSPOT_CLICK
FOR EVENT HOTSPOT_CLICK OF CL_GUI_ALV_GRID
IMPORTING E_ROW_ID E_COLUMN_ID.
ENDCLASS. " LCL_EVENT_HANDLER DEFINITION
CLASS LCL_EVENT_HANDLER IMPLEMENTATION
Implementing the Class which can handle events
CLASS LCL_EVENT_HANDLER IMPLEMENTATION .
*---Handle Double Click
METHOD HANDLE_HOTSPOT_CLICK .
Subroutine to get the HotSpot Cell information.
PERFORM GET_CELL_INFO.
SET PARAMETER ID 'BES' FIELD W_VALUE.
CALL TRANSACTION 'ME23N'.
ENDMETHOD. " HANDLE_HOTSPOT_CLICK
ENDCLASS. " LCL_EVENT_HANDLER
*& Module STATUS_0100 OUTPUT
PBO Event
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'OOPS'.
SET TITLEBAR 'TIT'.
Subroutine to fill the Variant Structure
PERFORM FILL_VARIANT.
IF W_GRID IS INITIAL.
CREATE OBJECT W_GRID
EXPORTING
I_SHELLSTYLE = 0
I_LIFETIME =
I_PARENT = CL_GUI_CONTAINER=>SCREEN0
I_APPL_EVENTS =
I_PARENTDBG =
I_APPLOGPARENT =
I_GRAPHICSPARENT =
I_NAME =
I_FCAT_COMPLETE = SPACE
EXCEPTIONS
ERROR_CNTL_CREATE = 1
ERROR_CNTL_INIT = 2
ERROR_CNTL_LINK = 3
ERROR_DP_CREATE = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. " IF SY-SUBRC <> 0
CALL METHOD W_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT = W_VARIANT
I_SAVE = 'A'
I_DEFAULT = 'X'
IS_LAYOUT =
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
IR_SALV_ADAPTER =
CHANGING
IT_OUTTAB = T_OUTTAB
IT_FIELDCATALOG = T_FIELDCAT
IT_SORT =
IT_FILTER =
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
OTHERS = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. " IF SY-SUBRC <> 0.
ENDIF. " IF W_GRID IS INITIAL
CREATE OBJECT W_EVENT_CLICK.
SET HANDLER W_EVENT_CLICK->HANDLE_HOTSPOT_CLICK FOR W_GRID.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
PAI Event
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN 'CANCEL'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form PREPARE_FIELD_CATALOG
Subroutine to build the Field catalog
<--P_T_FIELDCAT Field Catalog Table
FORM PREPARE_FIELD_CATALOG CHANGING PT_FIELDCAT TYPE LVC_T_FCAT .
DATA LS_FCAT TYPE LVC_S_FCAT.
Purchasing group...
LS_FCAT-FIELDNAME = 'EKGRP'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Purchasing Document Number...
LS_FCAT-FIELDNAME = 'EBELN'.
LS_FCAT-REF_TABLE = 'EKKO' .
LS_FCAT-EMPHASIZE = 'C411'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-HOTSPOT = 'X'.
APPEND LS_FCAT TO PT_FIELDCAT .
CLEAR LS_FCAT .
Name of Person who Created the Object...
LS_FCAT-FIELDNAME = 'ERNAM'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-OUTPUTLEN = '15' .
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Purchasing Document Date...
LS_FCAT-FIELDNAME = 'BEDAT'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Vendor's account number...
LS_FCAT-FIELDNAME = 'LIFNR'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Account Number of Vendor or Creditor...
LS_FCAT-FIELDNAME = 'NAME1'.
LS_FCAT-REF_TABLE = 'LFA1'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Vendor Name'(001).
LS_FCAT-SELTEXT = 'Vendor Name'(001).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Creation date of the change document...
LS_FCAT-FIELDNAME = 'UDATE'.
LS_FCAT-REF_TABLE = 'CDHDR'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Change Date'(002).
LS_FCAT-SELTEXT = 'Change Date'(002).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
User name of the person responsible in change document...
LS_FCAT-FIELDNAME = 'USERNAME'.
LS_FCAT-REF_TABLE = 'CDHDR'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Modified by'(003).
LS_FCAT-SELTEXT = 'Modified by'(003).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Short Text Describing R/3 Repository Objects...
LS_FCAT-FIELDNAME = 'DDTEXT'.
LS_FCAT-REF_TABLE = 'DD04T'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '15'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Old contents of changed field...
LS_FCAT-FIELDNAME = 'VALUE_OLD'.
LS_FCAT-REF_TABLE = 'CDPOS'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '12'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
New contents of changed field...
LS_FCAT-FIELDNAME = 'VALUE_NEW'.
LS_FCAT-REF_TABLE = 'CDPOS'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '12'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
ENDFORM. " PREPARE_FIELD_CATALOG
*& Form SELECT_PO
Subroutine to select all the Purchase Orders
There are no interface parameters to be passed to this subroutine.
FORM SELECT_PO .
SELECT EBELN " Purchasing Document Number
ERNAM " Name of Person who Created
" the Object
LIFNR " Vendor's account number
EKGRP " Purchasing group
BEDAT " Purchasing Document Date
FROM EKKO
PACKAGE SIZE 10000
APPENDING TABLE T_EBELN
WHERE EBELN IN S_EBELN
AND BEDAT IN S_BEDAT.
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S401(M8).
ENDIF. " IF SY-SUBRC NE 0
ENDFORM. " SELECT_PO
*& Form SELECT_OBJ_ID
Subroutine to select Object ID
There are no interface parameters to be passed to this subroutine.
FORM SELECT_OBJ_ID .
IF NOT T_EBELN IS INITIAL.
SELECT OBJECTCLAS " Object Class
OBJECTID " Object value
CHANGENR " Document change number
USERNAME " User name
UDATE " Creation date
FROM CDHDR
INTO TABLE T_CDHDR
FOR ALL ENTRIES IN T_EBELN
WHERE OBJECTID EQ T_EBELN-EBELN
AND UDATE IN S_UDATE
AND TCODE IN ('ME21N','ME22N','ME23N').
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S833(M8) WITH 'Header Not Found'(031).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_EBELN IS INITIAL
ENDFORM. " SELECT_OBJ_ID
*& Form SELECT_CHANGED_VALUE
Subroutine to select Changed Values
There are no interface parameters to be passed to this subroutine.
FORM SELECT_CHANGED_VALUE .
IF NOT T_CDHDR IS INITIAL.
SELECT OBJECTCLAS " Object class
OBJECTID " Object value
CHANGENR " Document change number
TABNAME " Table Name
FNAME " Field Name
VALUE_NEW " New contents of changed field
VALUE_OLD " Old contents of changed field
FROM CDPOS
PACKAGE SIZE 10000
APPENDING TABLE T_CDPOS
FOR ALL ENTRIES IN T_CDHDR
WHERE OBJECTCLAS EQ T_CDHDR-OBJECTCLAS
AND OBJECTID EQ T_CDHDR-OBJECTID
AND CHANGENR EQ T_CDHDR-CHANGENR.
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S833(M8) WITH 'Item Not Found'(032).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_CDHDR IS INITIAL
T_CDPOS_TEMP[] = T_CDPOS[].
ENDFORM. " SELECT_CHANGED_VALUE
*& Form SELECT_PUR_DOC
Subroutine to select Purchase Order Details
There are no interface parameters to be passed to this subroutine.
FORM SELECT_PUR_DOC .
IF NOT T_CDPOS IS INITIAL.
SORT T_EBELN BY EBELN.
LOOP AT T_CDPOS INTO FS_CDPOS.
READ TABLE T_EBELN INTO FS_EBELN WITH KEY EBELN =
FS_CDPOS-OBJECTID BINARY SEARCH.
IF SY-SUBRC NE 0.
DELETE TABLE T_EBELN FROM FS_EBELN.
ENDIF. " IF SY-SUBRC NE 0.
ENDLOOP. " LOOP AT T_CDPOS...
LOOP AT T_EBELN INTO FS_EBELN.
MOVE FS_EBELN-EBELN TO FS_EKKO-EBELN.
MOVE FS_EBELN-ERNAM TO FS_EKKO-ERNAM.
MOVE FS_EBELN-LIFNR TO FS_EKKO-LIFNR.
MOVE FS_EBELN-EKGRP TO FS_EKKO-EKGRP.
MOVE FS_EBELN-BEDAT TO FS_EKKO-BEDAT.
APPEND FS_EKKO TO T_EKKO.
ENDLOOP. " LOOP AT T_EBELN...
T_EKKO_TEMP[] = T_EKKO[].
ENDIF. " IF NOT T_CDPOS IS INITIAL
ENDFORM. " SELECT_PUR_DOC
*& Form SELECT_VENDOR
Subroutine to select Vendor details
There are no interface parameters to be passed to this subroutine.
FORM SELECT_VENDOR .
IF NOT T_EKKO IS INITIAL.
SORT T_EKKO_TEMP BY LIFNR.
DELETE ADJACENT DUPLICATES FROM T_EKKO_TEMP COMPARING LIFNR.
SELECT LIFNR " Account Number of Vendor or
" Creditor
NAME1 " Name 1
FROM LFA1
INTO TABLE T_LFA1
FOR ALL ENTRIES IN T_EKKO_TEMP
WHERE LIFNR EQ T_EKKO_TEMP-LIFNR.
IF SY-SUBRC NE 0.
MESSAGE S002(M8) WITH 'Master Details'(033).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_EKKO IS INITIAL
ENDFORM. " SELECT_VENDOR
*& Form DESCRIPTION
Subroutine to get the description
There are no interface parameters to be passed to this subroutine.
FORM DESCRIPTION .
IF NOT T_CDPOS IS INITIAL.
SORT T_CDPOS_TEMP BY TABNAME FNAME.
DELETE ADJACENT DUPLICATES FROM T_CDPOS_TEMP COMPARING TABNAME FNAME
SELECT TABNAME " Table Name
FIELDNAME " Field Name
ROLLNAME " Data element
FROM DD03L
INTO TABLE T_DATAELE
FOR ALL ENTRIES IN T_CDPOS_TEMP
WHERE TABNAME EQ T_CDPOS_TEMP-TABNAME
AND FIELDNAME EQ T_CDPOS_TEMP-FNAME.
IF NOT T_DATAELE IS INITIAL.
T_DATAELE_TEMP[] = T_DATAELE[].
SORT T_DATAELE_TEMP BY ROLLNAME.
DELETE ADJACENT DUPLICATES FROM T_DATAELE_TEMP COMPARING ROLLNAME.
SELECT ROLLNAME " Data element
DDTEXT " Short Text Describing R/3
" Repository Objects
FROM DD04T
INTO TABLE T_TEXT
FOR ALL ENTRIES IN T_DATAELE_TEMP
WHERE ROLLNAME EQ T_DATAELE_TEMP-ROLLNAME
AND DDLANGUAGE EQ SY-LANGU.
IF SY-SUBRC NE 0.
EXIT.
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_DATAELE IS INITIAL.
ENDIF. " IF NOT T_CDPOS IS INITIAL.
ENDFORM. " DESCRIPTION
*& Form FILL_OUTTAB
Subroutine to populate the Outtab
There are no interface parameters to be passed to this subroutine.
FORM FILL_OUTTAB .
SORT T_CDHDR BY OBJECTCLAS OBJECTID CHANGENR.
SORT T_EKKO BY EBELN.
SORT T_LFA1 BY LIFNR.
SORT T_DATAELE BY TABNAME FIELDNAME.
SORT T_TEXT BY ROLLNAME.
LOOP AT T_CDPOS INTO FS_CDPOS.
READ TABLE T_CDHDR INTO FS_CDHDR WITH KEY
OBJECTCLAS = FS_CDPOS-OBJECTCLAS
OBJECTID = FS_CDPOS-OBJECTID
CHANGENR = FS_CDPOS-CHANGENR
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_CDHDR-USERNAME TO FS_OUTTAB-USERNAME.
MOVE FS_CDHDR-UDATE TO FS_OUTTAB-UDATE.
READ TABLE T_EKKO INTO FS_EKKO WITH KEY
EBELN = FS_CDHDR-OBJECTID
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_EKKO-EBELN TO FS_OUTTAB-EBELN.
MOVE FS_EKKO-ERNAM TO FS_OUTTAB-ERNAM.
MOVE FS_EKKO-LIFNR TO FS_OUTTAB-LIFNR.
MOVE FS_EKKO-EKGRP TO FS_OUTTAB-EKGRP.
MOVE FS_EKKO-BEDAT TO FS_OUTTAB-BEDAT.
READ TABLE T_LFA1 INTO FS_LFA1 WITH KEY
LIFNR = FS_EKKO-LIFNR
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_LFA1-NAME1 TO FS_OUTTAB-NAME1.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
MOVE FS_CDPOS-VALUE_NEW TO FS_OUTTAB-VALUE_NEW.
MOVE FS_CDPOS-VALUE_OLD TO FS_OUTTAB-VALUE_OLD.
READ TABLE T_DATAELE INTO FS_DATAELE WITH KEY
TABNAME = FS_CDPOS-TABNAME
FIELDNAME = FS_CDPOS-FNAME
BINARY SEARCH.
IF SY-SUBRC EQ 0.
READ TABLE T_TEXT INTO FS_TEXT WITH KEY
ROLLNAME = FS_DATAELE-ROLLNAME
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_TEXT-DDTEXT TO FS_OUTTAB-DDTEXT.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
APPEND FS_OUTTAB TO T_OUTTAB.
CLEAR FS_OUTTAB.
ENDLOOP.
ENDFORM. " FILL_OUTTAB
*& Form GET_CELL_INFO
Subroutine to get the Cell Information
--> W_VALUE Holds the value of Hotspot clicked
FORM GET_CELL_INFO .
CALL METHOD W_GRID->GET_CURRENT_CELL
IMPORTING
E_ROW =
E_VALUE = W_VALUE
E_COL =
ES_ROW_ID =
ES_COL_ID =
ES_ROW_NO =
ENDFORM. " GET_CELL_INFO
*& Form VALIDATE_PD_NUM
Subroutine to validate Purchase Document Number
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_PD_NUM .
IF NOT S_EBELN[] IS INITIAL.
SELECT EBELN " Purchase Document Number
FROM EKKO
INTO W_EBELN
UP TO 1 ROWS
WHERE EBELN IN S_EBELN.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E717(M8).
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_EBELN[]...
ENDFORM. " VALIDATE_PD_NUM
*& Form VALIDATE_VEN_NUM
Subroutine to validate Vendor Number
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_VEN_NUM .
IF NOT S_LIFNR[] IS INITIAL.
SELECT LIFNR " Vendor Number
FROM LFA1
INTO W_LIFNR
UP TO 1 ROWS
WHERE LIFNR IN S_LIFNR.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E002(M8) WITH W_SPACE.
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_LIFNR[]...
ENDFORM. " VALIDATE_VEN_NUM
*& Form VALIDATE_PUR_GRP
Subroutine to validate the Purchase Group
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_PUR_GRP .
IF NOT S_EKGRP[] IS INITIAL.
SELECT EKGRP " Purchase Group
FROM T024
INTO W_EKGRP
UP TO 1 ROWS
WHERE EKGRP IN S_EKGRP.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E622(M8) WITH W_SPACE.
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_EKFRP[]...
ENDFORM. " VALIDATE_PUR_GRP
*& Form FILL_VARIANT
Subroutine to fill the Variant Structure
There are no interface parameters to be passed to this subroutine
FORM FILL_VARIANT .
Filling the Variant structure
W_VARIANT-REPORT = SY-REPID.
W_VARIANT-USERNAME = SY-UNAME.
ENDFORM. " FILL_VARIANT
reward point if helpful.
thanks
mrutyun^

What are the attributes available on Task Status Notification?

Hi,
I need to send the information below when a task is completed or rejected. So I would like to know if they are available. I think so because I've got them from Task Status Notification (OIM standard email definition). If not, what are the attributes available on Task Notification?
<Tasks.Task Name> is <Task Details.Status>.
<Task Details.Status>
<Resource.Resource Name>
Target User: <Users.First Name> <Users.Last Name> [<Users.User ID>]
Assigned to: <Task Information.Assignee First Name> <Task Information.Assignee Last Name> [<Task Information.Assignee User ID>]
Response Code : <Responses.Response>
Response Description : <Responses.Description>
Error Details : <Task Details.Reason>
Thanks,
Renato.
Hi,
I have implemented some java code to workaround the problem below... But I don't believe this does'n work in OIM :-):-):-):-) Please, tell me if you are using task status notification in OIM and if your email defintion has the variables below.
Thanks,
Hi,
One of OIM email templates is Task Status Email Notification. I am trying to notify the user (Notification tab) using this template but it didn't work. Even when I set the Object Name and Process Name values for an email definition, it does not work.
How have you implemented task status notification in your workflows? I think if this template exists in OIM, by default, so it is posible to have the information below during notifications.
I think I'll have to call Oracle's Support.
=======================================================
Subject: Process task <Tasks.Task Name> is <Task Details.Status>.
Body:
The Process task <Tasks.Task Name> is <Task Details.Status>.
The details of this process task are as follows:
Process Task Name: <Tasks.Task Name>
Process Task Status: <Task Details.Status>
Resource Name: <Resource.Resource Name>
Target User: <Users.First Name> <Users.Last Name> [<Users.User ID>]
Assigned to: <Task Information.Assignee First Name> <Task Information.Assignee Last Name> [<Task Information.Assignee User ID>]
Response Code : <Responses.Response>
Response Description : <Responses.Description>
Error Details : <Task Details.Reason>
=======================================================
As I've said, the e-mail was sent but in blank:
The Process task is .
The details of this process task are as follows:
Process Task Name:
Process Task Status:
Resource Name:
Target User: []
Assigned to: []
Response Code :
Response Description :
Error Details :
Is it possible to have those fields available on notifications?
Thanks,
Edited by: Renato.Guimaraes on 23/10/2009 08:05
Edited by: Renato.Guimaraes on 24/10/2009 15:57
Edited by: Renato.Guimaraes on 26/10/2009 13:31
I didn't get any answer until now.. Below it is what I've done.
a) Create an entity adapter that is assigned to the post-update of the Specific Task Info data object.
b) Select the task information searching by SCH_KEY, for example (I have to do more tests)
SELECT
sch.sch_key, sch.sch_status, sch.sch_note, mil.mil_key, rsc.rsc_data, rsc.rsc_desc
FROM
osi, sch, mil, rsc
WHERE
mil.mil_key = osi.mil_key and
osi.sch_key = sch.sch_key and
sch.sch_key = ? and
rsc.rsc_key = osi.rsc_key
c) Load the e-mail definition template and replaces the fields
d) Sends the e-mail
With that I solved another problem: I have to send an e-mail always the assignee adds a note to the task.
Edited by: Renato.Guimaraes on 28/10/2009 08:51. How I did that
Edited by: Renato.Guimaraes on 12/11/2009 12:19
Edited by: Renato.Guimaraes on 13/11/2009 07:22 Changed the Thread Subject

Hi Experts,
I want to extend my doubt a little more.
I have a requirment as below.
User will enter a range of Date say 01.06.2011 to 25.06.2011.
I need to show him data in two columns one cloumn for the entered day range and second column for prevoius month date rangei.e(01.05.2011 to 25.05.2011)
can i achive this without using Customer Exit.
Regards
Laxman

What are the parameters in Call transaction method?

Hi ABAPER'S,
Please give me what are the parameters in call transaction method?
Thanks,
Prakash

Processing batch input data with CALL TRANSACTION USING is the faster of the two recommended data transfer methods. In this method, legacy data is processed inline in your data transfer program.
Syntax:
CALL TRANSACTION <tcode>
USING <bdc_tab>
MODE <mode>
UPDATE <update>
<tcode> : Transaction code
<bdc_tab> : Internal table of structure BDCDATA.
<mode> : Display mode:
A
Display all
E
Display errors only
N
No display
<update> : Update mode:
S
Synchronous
A
Asynchronous
L
Local update
A program that uses CALL TRANSACTION USING to process legacy data should execute the following steps:
Prepare a BDCDATA structure for the transaction that you wish to run.
With a CALL TRANSACTION USING statement, call the transaction and prepare the BDCDATA structure. For example:
CALL TRANSACTION 'TFCA' USING BDCDATA
MODE 'A'
UPDATE 'S'.
MESSAGES INTO MESSTAB.
IF SY-SUBRC <> 0.
<Error_handling>.
ENDIF.
The MODE Parameter
You can use the MODE parameter to specify whether data transfer processing should be displayed as it happens. You can choose between three modes:
A Display all. All screens and the data that goes in them appear when you run your program.
N No display. All screens are processed invisibly, regardless of whether there are errors or not. Control returns to your program as soon as transaction processing is finished.
E Display errors only. The transaction goes into display mode as soon as an error in one of the screens is detected. You can then correct the error.
The display modes are the same as those that are available for processing batch input sessions.
The UPDATE Parameter
You use the UPDATE parameter to specify how updates produced by a transaction should be processed. You can select between these modes:
A Asynchronous updating. In this mode, the called transaction does not wait for any updates it produces to be completed. It simply passes the updates to the SAP update service. Asynchronous processing therefore usually results in faster execution of your data transfer program.
Asynchronous processing is NOT recommended for processing any larger amount of data. This is because the called transaction receives no completion message from the update module in asynchronous updating. The calling data transfer program, in turn, cannot determine whether a called transaction ended with a successful update of the database or not.
If you use asynchronous updating, then you will need to use the update management facility (Transaction SM12) to check whether updates have been terminated abnormally during session processing. Error analysis and recovery is less convenient than with synchronous updating.
S Synchronous updating. In this mode, the called transaction waits for any updates that it produces to be completed. Execution is slower than with asynchronous updating because called transactions wait for updating to be completed. However, the called transaction is able to return any update error message that occurs to your program. It is much easier for you to analyze and recover from errors.
L Local updating. If you update data locally, the update of the database will not be processed in a separate process, but in the process of the calling program. (See the ABAP keyword documentation on SET UPDATE TASK LOCAL for more information.)
The MESSAGES Parameter
The MESSAGES specification indicates that all system messages issued during a CALL TRANSACTION USING are written into the internal table <MESSTAB> . The internal table must have the structure BDCMSGCOLL .
You can record the messages issued by Transaction TFCA in table MESSTAB with the following coding:
(This example uses a flight connection that does not exist to trigger an error in the transaction.)
DATA: BEGIN OF BDCDATA OCCURS 100.
INCLUDE STRUCTURE BDCDATA.
DATA: END OF BDCDATA.
DATA: BEGIN OF MESSTAB OCCURS 10.
INCLUDE STRUCTURE BDCMSGCOLL.
DATA: END OF MESSTAB.
BDCDATA-PROGRAM = 'SAPMTFCA'.
BDCDATA-DYNPRO = '0100'.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
CLEAR BDCDATA.
BDCDATA-FNAM = 'SFLIGHT-CARRID'.
BDCDATA-FVAL = 'XX'.
APPEND BDCDATA.
BDCDATA-FNAM = 'SFLIGHT-CONNID'.
BDCDATA-FVAL = '0400'.
APPEND BDCDATA.
CALL TRANSACTION 'TFCA' USING BDCDATA MODE 'N'
MESSAGES INTO MESSTAB.
LOOP AT MESSTAB.
WRITE: / MESSTAB-TCODE,
MESSTAB-DYNAME,
MESSTAB-DYNUMB,
MESSTAB-MSGTYP,
MESSTAB-MSGSPRA,
MESSTAB-MSGID,
MESSTAB-MSGNR.
ENDLOOP.
The following figures show the return codes from CALL TRANSACTION USING and the system fields that contain message information from the called transaction. As the return code chart shows, return codes above 1000 are reserved for data transfer. If you use the MESSAGES INTO <table> option, then you do not need to query the system fields shown below; their contents are automatically written into the message table. You can loop over the message table to write out any messages that were entered into it.
Return codes:
Value
Explanation
0
Successful
<=1000
Error in dialog program
> 1000
Batch input error
System fields:
Name:
Explanation:
SY-MSGID
Message-ID
SY-MSGTY
Message type (E,I,W,S,A,X)
SY-MSGNO
Message number
SY-MSGV1
Message variable 1
SY-MSGV2
Message variable 2
SY-MSGV3
Message variable 3
SY-MSGV4
Message variable 4
Error Analysis and Restart Capability
Unlike batch input methods using sessions, CALL TRANSACTION USING processing does not provide any special handling for incorrect transactions. There is no restart capability for transactions that contain errors or produce update failures.
You can handle incorrect transactions by using update mode S (synchronous updating) and checking the return code from CALL TRANSACTION USING. If the return code is anything other than 0, then you should do the following:
write out or save the message table
use the BDCDATA table that you generated for the CALL TRANSACTION USING to generate a batch input session for the faulty transaction. You can then analyze the faulty transaction and correct the error using the tools provided in the batch input management facility.

What are the main transaction codes in XI?

What are the main transaction codes in XI?

SAP XI TRANSACTION CODES
ALRTCATDEF- Alerts Configuration.
ALRTDISP - Display of Alerts Created
SXMB_IFR -> Start Integration Builder
SXMB_MONI -> Integration Engine - Monitoring
SXI_MONITOR -> XI: Message Monitoring
SXI_CACHE -> To Access IS runtime cache
SXI_SUPPORT -> Test all the Repository and Directory Objects
SXI_CACHE -> XI data directory cacheidx1 -> idoc adapter
IDX2 -> idoc metadata
IDX5 -> monitor idoc adapter
SM21 -> log di sistema
ST22 -> dump abap (analisi di eccezioni)
SMQ1 -> messages inbound e outbound queue
SMQ2 -> messages inbound e outbound queue
SMICM -> J2EE administration
ST06 -> stato della macchina cpu memory filesystem machine status - cpu, memory and file system.
ST03 -> workload.
SCC4 -> visualizza mandanti del sistema
WE20 -> partner profiles
sale - ale settings
RZ10 - edit system profile
SM59 ->mantain rfc destinations
BD64 -> mantain distribution model (trasformazioni)
SU01 -> users
AL08 -> list all logged users(user login logon)
SE10 -> Change Request
SE09 -> Change Request
WE05 -> All idocs
WE19 -> IDoc Test Tool
WE21 -> port definition
SE11 -> Data dictionary
SM21 -> log sistema xi
se37 -> mantain funcion modules
SICF -> http server configuration
SMGW -> trace, alzare livello di trace.
BD13 ->
BD64 -> modelli di distribuzione
PFCG -> Roles
tabella TSTC -> sap transactions codes
tabella TSTCT -> transaction descriptions
STMS -> transports management
SPAM -> apply ABAP support packages
SPAU -> manage objects after apply support packages
SE01 -> manage change requests
SLDCHECK -> Test SLD Connection
SLDAPICUST-> SLD API Customizing
SXMB_ADM -> Integration Engine - Administration
SXMB_MONI_BPE -> Process Engine - Monitoring
SE38 -> ABAP Editor
SE11 -> ABAP Dictionary
ST22 -> ABAP dump analysis
SPROXY-> ABAP Proxy Generation
SE80 -> Object Navigator
ABAPDOCU -> ABAP Documentation and Examples
SE24-> Class Builder
SM21-> Online System Log Analysis
SMQ1-> qRFC Monitor (Outbound Queue)
SMQ2-> qRFC Monitor (Inbound Queue)
RZ70-> SLD Administration
SM58-> Asynchronous RFC Error Log
SM59-> RFC Destinations (Display/Maintain)
SMICM-> ICM Monitor
WE60-> Documentation for IDoc types
BD87-> Status Monitor for ALE Messages
IDX1-> Port Maintenance in IDoc Adapter
IDX2-> Meta Data Overview in IDoc Adapter
WE05-> IDoc Lists
WE02-> Display IDoc
WE19-> Test tool
WE09-> Search for IDocs by Content
WE20-> Partner Profiles
WE21-> Port definition in XI
SE16-> Data Browser
SE93-> Maintain Transaction Codes
SM30-> Call View Maintenance
SU01-> User Maintenance
SM02-> System Messages
BD54 -Logical System Creation.
SWXF_PBUILDER -> for Detail BPM Process
SMQS - > to register the destination in QOUT scheduler
WEOUTQUEUE - > to start the queue processing
SMQR - > to register the queue
IDXPW - > to activate the IDOC message package
IDXP - > to monitor the message packages.
SWF_XI_CUSTOMIZING -> transaction to check prerequisites for integration processes.
http://www.erpgenie.com/abaptips/content/view/452/62/

What are the importent transaction codes in edi

what are the importent transaction codes in edi

hi,
=>sale - ALE Customizing
=>bale - Distribution Administration (ALE)
=>wedi - IDOC Type and EDI Basis
=>shdb - BDC (Transaction Recorder)
=>lsmw - LSMW
=>bapi - BAPI
=>spau - Display Modified DE Objects
=>spdd - Display Modified DDIC Objects
=>sara - central idoc archiving
=>stms - Transport Management System
=>wedi - IDOC Type and EDI Basis (IDOC Configuration)
=>bd21 - Analyze change pointers - create IDOC from change pointer
=>bd10 - Send Material Master
=>bd12 - Send Customer Master
=>bd14 - Send Vendor Master
=>bd50 - Activate Change Pointer for Message Type
=>bd55 - Conversion rule user exit (Link conversion rule user exit to the different system \ partner combinations)
=>bd54 - Maintain Logical Systems
=>bd71 - Distribute Customer Model
=>bd87 - Process Inbound IDOCs
=>bd88 - Process Outbound IDOCs
=>bdm2 - Cross-system IDOC Reporting
=>bdm7 - ALE Audit - statistical analyses
=>bdm8 - ALE Audit - sending confirmations
=>bd61 - Activate Change Pointer generally
=>bmv0 - Direct Input Data Transfer Administration
=>rz04 - Operation Mode
=>rz12 - RFC Server Group Maintenance
=>sar3 - Archiving object customizing
=>s001 - SAPoffice Inbox
=>s010 - Standards Texts (SAP Script)
=>se01 - Transport Organizer (Extended View - Performing and managing the transport of development object across different systems)
=>se09 - Transport (Workbench) Organizer (Controlling and keeping track of Development work and Development Objects)
=>se78 - Administration of Form Graphics (Import Graphics into SAP System)
=>se84 - ABAP Repository Information (search for SAP objects)
=>su01 - User Maintenance (Security)
=>su02 - Maintain Authorization Profiles
=>su03 - Maintain Authorizations
=>sm36 - Background Job Scheduling
=>sm37 - Background Job Monitoring (display batch jobs)
=>sm31 - Table Maintenance
=>sm30 - Calling View Maintenance
=>sm35 - Batch Input Monitoring (Error Logs)
=>sm50 - Process Overview
=>sm58 - Transactional RFC Monitoring
=>sm59 - Maintain RFC Destinations (Define RFC Configuration)
=>snro - Number Range Objects (for IDOCs)
=>we02 - Display IDOC
=>we05 - IDOC lists
=>we07 - IDOC statistics
=>we12 - Inbound processing of outbound file - convert outbound to inbound file
=>we14 - Process (dispatch) IDOCs through Port - RSEOUT00
=>we15 - Outbound IDOC from NAST - message control
=>we16 - Inbound File
=>we18 - Generate status file
=>we19 - Test tool
=>we20 - Add new Message Type to Partner Profile
=>we21 - Maintain Port Definition
=>we30 - IDOC Type development
=>we31 - IDOC Segment development
=>we41 - Process Code Outbound
=>we42 - Process Code Inbound
=>we46 - IDoc Administration
=>we47 - Status Code Maintenance
=>we57 - Assign function module to logical message and IDoc type
=>we63 - IDOC Type for Parser Output
=>we82 - Assign IDOC to Message Type
=>we60 - IDOC Documentation - IDOC Types
=>we61 - IDOC Documentation - IDOC Record Types
=>we81 - Create new IDOC Message Types
=>we82 - Assign IDOC to Message Type
=>pa20 - Display HR Master Data
=>pa30 - Maintain HR Master Data
=>bd59 - Create and assign Filter Object Type for Message Type
=>bd64 - Maintenance of ALE or any other Distribution Model
Hope this helps, Do reward.

What are the master Data in SAP SD

Hi All,
I have a question. Even though its a naive question please bear with me.
what are the master data in SAP SD.
These are the one's i know.
1) Customer Master Data
2) Material Master Data
But what i want to know is does the following ones come under master data?
1) Price master data
2) Transporters master data(we are using transportation management)
3) Route master data
4) Customer material info records
5) Credit master data(iam using credit management)
What will be the master data for Transportation management(module), CIN(country India version), credit management & rebate processing
Thanks for your valuable time & knowledge.
Regards,
Pavan

Hi Pavan,
 Just to add some more valuable information.
Organisational master data : Every company is structured in a certain way. In order to work with the SAP System your company structure has to be represented in the system. This is done with the help of various organizational structures.
Condition master data : In sales and distribution, products are sold or sent to business partners or services are performed for them. Data about the products and services as well as about the business partners is the basis for sales processing. Sales processing with the SAP R/3 System requires that the master data has been stored in the system.
Material master data : In addition to sales and distribution, other departments of the company such as accounting or materials management access the master data. The material master data is stored in a specific structure in order to allow access from these different views.
Document master data : The processing of business transactions in sales and distribution is based on the master data. In the SAP R/3 System, business transaction are stored in the form of documents. These sales and distribution documents are structured according to certain criteria so that all necessary information in the document is stored in a systematic way.
Customer Master Data : or for that matter various business partners, we maintain data for them also called as the customer master data or vendor master data like that.
Thanks & Regards
Sadhu Kishore

What are the key points to beconsider while upgrading from 4.7 to ECC 6.0

hai
What are the key points to beconsider while upgrading from 4.7 to ECC 6.0
please provide sufficient material
points will be rewarded
regards
v.sridhar

Hi Sridhar,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional perspective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, and QM.....
Click on Search
then it displays the Release Version and the Delta Functionality. Which can be downloaded to a word document if required.
And also check the release notes of ECC 6.0 in service.sap.com.
When you are upgrading from 4.6C to ECC6
Nothing major, follow the same process you'd follow if you were updating PI service packs in R/3 or enhancing data sources. Empty queues in RSA7 and lbwq. Also empty setup tables through lbwg as the upgrade doesn't like it if these tables contain data. This is all on the R/3 side (although you empty RSA7 by running each delta TWICE in BW).
To transfer queues from lbwq to rsa7, execute jobs through LO cockpit (lbwe).
Some of your data sources could also be using sm13 instead of lbwq, so do check it out as well.
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't require solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Major difference is ECC6 is netwear product having WASJAVA+ABAP
secondly support unicode apart from this we have other diff. you can get form master guide from service.sap.com/instguides.
Please go through the link that is shown here and if there is any doubts then feel free to ask.
Major difference is ECC6 is net weaver product having WASJAVA+ABAP
secondly support Unicode apart from this we have other diff. you can get from master guide from service.sap.com/instguides
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't required solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Please also Refer sdn thread and make a small search where u can find lot of information Reg this
olution Browser would give the differences (Features):
http://solutionbrowser.erp.sap.fmpmedia.com/ Give source and target versions.
Release Info:
ECC 6.0:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Refer below and search for posts on this topic on sdn
There are so many differences between the version in different objects
I
These are the some of the settings that are differed in the two versions and in that two objects
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
Upgrade from 4.6c to 6.0 ECC
upgrade from 4.7 to ecc 6.0
Please Do Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Searching by Criteria: what are the keywords?

Similar Messages

Maybe you are looking for