Searching for a BAdI...

Hi All,
I'm just curious, what is the most easiest way to find the BAdI of a certain transaction? tnx! Helpful tips will be rewarded.
Regards,
Mackoy

Hi,
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
Now
4) Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any transaction
if you follow this 7 steps, and execute/run your infotype or press any button then see whether the screen is going to stop there, if the scrren stops and goes to Debugging mode then there should be a BADI for that one
or
First take the development package name of the tcode u want to search and then goto se18 or se19 .press f4 in the definition name and give the Development package name and check the BADI's
Regards,
Nandha
Reward if it helps

Similar Messages

How to search for a badi

how to search for a badi
srinivas.

Hi Srinivas,
Good
Check this link
/people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
Run this program
*& Report ZNEGI16 *
REPORT ZNEGI16 .
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
endcase.
Solution 2
1.Get the Package of the program name of the transaction.
2.Go to Transaction SE18.
3.Press F4 on the badi definition name.
4.Click the information systems button.
5.Give the Package name and press enter.
6.Select the BADI that is relevant to the application.
Good Luck and thanks
AK

How to search for a BADI in a transaction

Hi All,
Please let me know the steps to find a BADI for a transaction.
Thanks,
Jaffer Ali.S

check this.
u can find BADI's in different ways...
1>First go to any transaction->iN THE menu bar SYSTEM->STATUS->Get the program name ->double click->u will go to the program attached to the tcode.Now search term will be CALL CL_EXITHANDLER.Now u will get list of BADI'S available..
2>Goto SE24->Give class name as CL_EXITHANDLER->Display->double click on get_instance mathod->Now u will go inside the method->Now put break point on the cl_exithandler.Now go to any transaction code and pass dat..U will see that it will be stopped on the break point which u set on the cl_exithandler...In the exit name u can find list of badi's attached to the tcode..
There are multiple ways of searching for BADI.
Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Finding BADI Using SQL Trace (TCODE-ST05).
Finding BADI Using Repository Information System (TCODE- SE84).
1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for CL_EXITHANDLER=>GET_INSTANCE.
Make sure the radio button In main program is checked. A list of all the programs with call to the BADIs will be listed.
The export parameter EXIT_NAME for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter INSTANCE will have the interface assigned to it. Double click on the method to enter the source code.Definition of Instance would give you the Interface name.
2. Start transaction ST05 (Performance Analysis).
/people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
3. Go to Maintain Transaction (TCODE- SE93).
Enter the Transaction VD02 for which you want to find BADI.
Click on the Display push buttons.
Get the Package Name. (Package VS in this case)
Go to TCode: SE84->Enhancements->Business Add-inns->Definition
Enter the Package Name and Execute.
Here you get a list of all the Enhancement BADIs for the given package MB.
The simplese way for finding BADI is
1. chooes Tcode Program & package for that Tcode.
2. Go to Tcode se18
3. Press F4
4. search by package or by program.
Regards
Kiran Sure

How to search for (new) BAdIs?

Hi,
I found some forum threads, blogs, and wikis in sdn about "How to search for BAdIs".
Here the list I found:
1. SE18 u2013 BADI Definition
2. SE81 u2013 Application Hierarchy
3. SPRO u2013 SAP IMG Reference
4. SE84 u2013 Object Navigator u2013 Repository Information System
5. SPAU_ENH (ECC6.0) u2013 Enhancements -> Simple or Composite (spots, implementations, sections, upgrades)
6. ST05 u2013 SQL Trace -> Buffer Trace
7. SE24 -> CL_EXITHANDLER -> Breakpoint at Method GET_INSTANCE -> Run Transaction -> Exit_name -> BADI name
The fastest ways are ST05 and SE24, I think. Are there such effective ways for the new, kernel based BAdIs? ST05 and CL_EXITHANDLER with debugger donu2019t work.
thanks in adavance,
Michael

Hi,
Missed one more method
The below steps should enable you to find any BADI related to any transaction in a matter of minutes.
Go to the transaction SE37 to find your function module.
Locate the function SXV_GET_CLIF_BY_NAME.
Put a breakpoint there.
Now open a new session.
Go to your transaction.
Goto the screen where you want to find any BADI available, it will stop in this function.
Double click on the function field EXIT_NAME.
That will give you name of the BADI that is provided in your transaction.
Again execute and it stop again and fill with new BADI name if any
Repeat the same step and you come to know how many BADI exist
Regards
Bala Krishna

Search for BADIS in 4.6c

I am looking for a BADI to change a PO Item in 4.6c. THe is no user exit that exists that will allow me to change the item data.
In searching for the BADI, I went to SE18 and looked at all existing definitions and there is nothing that resembles what I am looking for (I know that BADI ME_PROCESS_PO_CUST exists in some version of SAP but I don't see it in 4.6c)
I also search my BAPI and the transaction for 'exithandler' and do not find that in the code.
I am missing anything ? Does this pretty much tell me that a BADI does not exist to change the PO in 4.6c?
thanks, BAR

Hello BAR,
You are right, there is no user-exit nor a BADI to change any standard fields of the PO. Only user-defined fields may be changed.
Regards,
John.

Is there any way to search for bad blocks in my Macintoshi HD without formating it? I'm experiencing too much I/O problems...

Is there any way to search for bad blocks in my Macintoshi HD without formating it? I'm experiencing too much I/O problems...

Check the drive health with the free demo of SMART Utility.
http://www.volitans-software.com/smart_utility.php
Reformatting and zeroing out might keep a drive going a bit longer, but once bad blocks become noticeable, it's not a drive you should trust any longer.

Search for BAdi for Customer Master Data (XD01)

Hi experts,
i am looking for a BAdi for Customer Master data (XD01). Can anyone suggest me which one can i use?
thanks in advance.
Regards,
aksh

hi
execute this report
*& Report ZNAGBADI
REPORT ZNAGBADI.
*report zbadi_find .
tables : tstc,
tadir,
modsapt,
modact,
trdir,
tfdir,
enlfdir,
sxs_attrt ,
tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode,
p_pgmna like tstc-pgmna .
data wa_tadir type tadir.
start-of-selection.
if not p_tcode is initial.
select single * from tstc where tcode eq p_tcode.
elseif not p_pgmna is initial.
tstc-pgmna = p_pgmna.
endif.
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object in ('SMOD', 'SXSD')
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(105) sy-uline.
format color col_heading intensified on.
Sorting the internal Table
sort jtab by object.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type c.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
loop at jtab into wa_tadir.
at first.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Enhancement/ Business Add-in',
41 sy-vline ,
42 'Description',
105 sy-vline.
write:/(105) sy-uline.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
format color col_group intensified on.
write:/1 sy-vline,
2 wf_object2,
105 sy-vline.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
select single modtext into wf_txt
from modsapt
where sprsl = sy-langu
and name = wa_tadir-obj_name.
format color col_normal intensified off.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single text into wf_txt
from sxs_attrt
where sprsl = sy-langu
and exit_name = wa_tadir-obj_name.
format color col_normal intensified on.
endcase.
write:/1 sy-vline,
2 wa_tadir-obj_name hotspot on,
41 sy-vline ,
42 wf_txt,
105 sy-vline.
at end of object.
write : /(105) sy-uline.
endat.
endloop.
write:/(105) sy-uline.
skip.
format color col_total intensified on.
write:/ 'No.of Exits:' , wf_smod.
write:/ 'No.of BADis:' , wf_badi.
else.
format color col_negative intensified on.
write:/(105) 'No userexits or BADis exist'.
endif.
else.
format color col_negative intensified on.
write:/(105) 'Transaction does not exist'.
endif.
at line-selection.
data : wf_object type tadir-object.
clear wf_object.
get cursor field field1.
check field1(8) eq 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
when 'SXSD'.
set parameter id 'EXN' field sy-lisel+1(20).
call transaction 'SE18' and skip first screen.
endcase.
reward for useful answers
regards
Nagesh.Paruchuri

How do I stop firefox from redirecting every page I click on in Google search? No matter what I search for in Google when I click on it Firefox redirects me to some other search, sales, or contest page.

How do I stop firefox from redirecting every page I click on in Google search? No matter what I search for in Google when I click on it Firefox redirects me to some other search, sales, or contest page. I have a security program running, no maleware, adware, or virus on my pc. Thanks for the help in advance.

Sounds like a dose of search redirect malware or a redirect virus.
Install, update, and run these programs in this order. They are listed in order of efficacy. '''''(Not all programs detect the same Malware, so you may need to run them all to solve your problem.)''''' These programs are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have. 
''Note: If your Malware infection is bad enough and you are mis-directed to URL's other than what is posted, you may have to use a different PC to download these programs and use a USB stick to transfer them to the afflicted PC.''
Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php] 
SuperAntispyware - [http://www.superantispyware.com/] 
AdAware - [http://www.lavasoftusa.com/software/adaware/] 
Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html] 
Windows Defender: Home Page - [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx] 
Also, if you have a search engine re-direct problem, see this: 
http://deletemalware.blogspot.com/2010/02/remove-google-redirect-virus.html
If these don't find it or can't clear it, post in one of these forums for specialized malware removal help: 
[http://www.spywarewarrior.com/index.php] 
[http://forum.aumha.org/] 
[http://www.spywareinfoforum.com/] 
[http://bleepingcomputer.com]

How to search for a text string in Reports designer?

In iDS reports (10gR2), I want to search from top down for a text string was used in one of the queries or triggers. In Forms, you can do it, in reports the related menu item is always seems to be grayed out no matter what item I pick in the Navigator. Is it doable or not? If yes, then how. I don't wanna open each program piece including the queries in the data model, report triggers or program units and look for (by visual scanning) for the text I am searching for. This is crazy. There must be a way to do it. Thanx.

That is pretty bad for such an expensive report development program. The forms allows it, I wonder why Oracle did not include similar functionality in the reports developer. I knew the conversion to ascii, but during development it is pain in the ... just to search for a simple text string in the related program units in the report, to convert to ascii, do the search and then go back to the developer. Anyway, if that is the only way, there is nothing we can do I guess :(

HT4628 After installing the new OS from apple (10.8.2) my macbook pro keeps disconnecting from the internet. I am connecting with an Airport Extreme and while it shows I am connected, every 20-45 seconds its searching for a wireless connection. Any sugg

I guess I posted my question as a title but that is my issue. My airport is connected via wireless yet it keeps searching for a wireless connection, hence I am experiencing bad latency and disconnection issues. Anyone know a solution?

I have the same problem. And in my case it happens when i transfer "large" files over the WiFi. When i send an MP3 filer over Skype i loose connection. When i transfer updates between my iPhone 5 / iPad 3 and iMac with Mountain Lion i loose connection. When i have a video conference i loose connection. You get the idea.
There is usually like 30 people using their own router on the 2.4 GHz band near by. None on the 5 GHz band which i use. But when my WiFi freezes on ML i can only see my own router. And i am also connected to it. But all my neighbors WiFi routers are now invisble to me. My network stalled.
What i do is that i disconnect my WiFi and then reconnect it again. Thank fixes it. But all my transfers and what not has been dropped. And i have to start all over - and the WiFi will stall again.
While my WiFi is frozen on the iMac with ML i have no problem using the same router on the same 5 GHz band with my iPhone 5 or iPad 3.
Downgrading the AirPort Extreme to 7.6.1 from 7.6.3 helped a bit. Now i only loose connection a few times each day.
It is a software error in ML i am sure of. A driver maybe. But i am suspecting that it is either a speed-sync error or an energy saving error. Like the network card turns of in the middle of a file transfer to save enrgy - maybe.
When i stream movies from my iMac to my Apple TV or 3 there is no problem at all. It is so odd.

Searching for a specific file size

Hello,
It's been a while but it seems like XP let me search for specific file sizes - e.g. if I wanted to search for files that were greater than 10GB or if I wanted to search for files less than 20GB.
I can't figure it out in Windows 8.1.
If the answer is possible through standard search and not powershell, I'd prefer the GUI way.
Thanks

In File Explorer (was Windows Explorer), type the search criteria into the box in the top right of the screen and press Enter.
Example searches are:
A minimum file size, simply type size:>30,000KB into the Search box and press Enter.
type:=.pdf or type:=.doc will display specific file types.
filename:x will display files using a partial filename. x represents the partial filename you want to search for.
kind:video, kind:music or kind:pictures will find all the videos, music or pictures.
If you just click or tap in the Search box, Search Tools will appear which allows the choosing of a Kind, a Size, Date Modified, Other Properties and Advanced search. In Folder Options > Search Tab, the search options can be changed, e.g. Find partial
matches.
Providing the location is indexed, you can search in File Explorer for a specific word or phrase by typing content:
followed by your phrase enclosed in double quotes. This will produce a list of files matching the criterion.
Speed up the search by opening File Explorer (was Windows Explorer) at the folder you want to search, rather than at the root folder. Also, pressing F3 will show Search options like Date Modified and Size.
Ninety-nine per cent of politicians give the rest a bad name.

Searching for a Special Soundc

Hello,
sry for my bad english i'm german
I have a pc with a cheap soundcard, which has a optical sound input.
At this soundcard i use the creative T7900 7. sound system.
Now i want to connect my XBox360 to the soundcard via optical sound input.
But my cheap soundcard only supports stereo if i get the sound signal over optical input.
Is there a Creative soundcard which supports 5. via optical in?
I want to get the 5. signal from my Xbox360 via optical cable in my soundcard and then direct to the creative T7900 sound system which is connected to the soundcard. Is there such a cheap soundcard from creative, or is it impossible?
Thank you?

Welcome to Apple Support Communities!
Using a popular search engine, I located this resource:
http://www.apple.com/downloads/macosx/system_disk_utilities/microsoftofficeopenx mlfileformatconverter.html
It is also referenced here: http://280slides.com/pptx.php

Opportunity Search for Status NE (is not) is not supported by SAP Standard

Hi experts,
due to wiki entry
Searching for business transactions in the web ui using the Status criteria - CRM - SCN Wiki
the opportunity search for a status with operator NE is not supported.
Is there any SAP proposal for an appropriate workaround?
Thank you and best regards
Vanessa

Hello Vanessa,
This is a fresh development for my current customer which is not yet completely tested. The last customer had the same requirement, created an OSS-message for it, SAP told him in standard it is not possible and gave up. I think I already heard that too many selection parameters are not supported but I haven't seen it yet in our project. But I have seen that with mabye 100000 excluded transactions there is a time out.
The alternative would be to create a sub-class of the GENIL-class (I think this is CL_CRM_QOPP_RUN_BTIL in your case - search for CL*OPP*IL* ) where the SQL-statement is triggered and redefine the relevant method (which is normally GET_DYNAMIC_QUERY_RESULT) and enhance the SQL-statement. Somewhere is customizing you have to replace the original class with the new class afterwards but right now I don't know where. I have not yet done this from scratch and I need to investigate this a little bit further.
The second alternative would be to modify the select statements in a BADI. I guess it is CRM_BADI_RF_Q1O_READ. But there I only the the possibility to change the STATUS_COMMON-criteria to OBJECT_ID criterias as still STATUS_COMMON NE is not supported in the SQL-statement of the GENIL-class.
Best regards,
Thomas

Authorization check when searching for transactions

Hi all,
We have a requirement to show only those activities for which a user is authorized. A custom authorization object has been maintained and the check in CRMD_ORDER has been extended accordingly. When opening an activity, the check is executed correctly, but when searching for activities, ALL activities are still shown, so the check is not performed at that particular moment. I have tested with standard authorization objects as well, but none of them are taken into account. Does anyone of you know how we can have the authorization check executed before or during the search, so that only those activities are shown, that the user may maintain as well.
Thanks in advance!
Regards,
Joost

Hello Joost,
Check if BADI CRM_ORDER_INDEX_BADI could not map your requirement.
Regards,
Frédéric

How to search for the particular ABAP Object

Hi,
I am using the SAP 4.6C machine, I need to search for the particular ABAP Object. Plz can anyone help me in this.
Regards,
Pralhad P. Teggi

You'll get a better response if you ask a meaningful question.
If you want to scan for Business Objects (BOR) use transaction SWO1
For ABAP classes / objects use a combination of transactions SE24 / SE18 / SE19 and /or SE80
(SE 18 / SE 19 are for Badi's)
Cheers
Jimbo

Searching for a BAdI...

Similar Messages

Maybe you are looking for