Searching Records Following the Creation of a Lookup Table

Hello,
Please excuse my ignorance but I have just created a lookup table by using the wizard in SQL Workshop. All is well text has been replaced by numbers. My issue is that when I do a search now using a drop down list based on a query it returns records based on other numbers as well. That is if '2' relates to an item the search picks up anything containing a 2: 2,21,22, etc. How can I get the query to return a value for the number selected and not anything containing that number?
and (
instr(upper("MODEL_ID"),upper(nvl(:P40_REPORT_SEARCH,"MODEL_ID"))) > 0
Kind Regards,
Swelch
Edited by: Steve Welch on Mar 9, 2012 12:03 PM

Here are two potential solutions
and (instr(upper('~'||"MODEL_ID"||'~'),upper(nvl('~'||:P40_REPORT_SEARCH||'~',"MODEL_ID"))) > 0)or
AND model_id = NVL(:P40_REPORT_SEARCH, model_id)The first is often used for components such as shuttles. I think I've added the special characters in the right place - not tested/verified against my previous example
The second may be more appropriate to your scenario, depending on your data.
Scott

Similar Messages

Inserting records in the ABAP exit function (hashed table XTH_DATA)

Hi all,
I want to add records in the logic of an ABAP exit function. Due table XTH_DATA being a hashed table the normal insert or append is not possible.
My logic MUST move the data to a temporary table (ITAB) where the logic is executed (modifying KYF values and creating new records.
In order to quickly get to a result I have solved the problem in an awful way through hardcoding the structure of ITAB to be the same as XTH_DATA is in this specific case.
I would like to know if someone has an exmaple of a nice way to dynamically create an ITAB with the structure of XTH_DATA?
At the end it should be possible to do: XTH_DATA[] = itab[].
Greetings,
Martin

Hi Martin,
the only way I know is to solve this problem with sort of pointers, field symbols. Roughly spoken the idea is you lookup the structure of xth_data in table dd03l. you define an internal table of type any. you loop around your xth_data table and assign the value of each column of xth_table to your internal table. then you do your your adding. Hopefully then you can simply assign xth_data to your itab.
regards,
Jürgen

Split records into two files based on lookup table

Hi,
I'm new to ODI and want to know on how I could split records into two files based on a value in one of the columns in the table.
Example:
Table:
my columns are
account name country
100 USA
200 USA
300 UK
200 AUS
So from the 4 records I maintain list of countries in a lookup file and split the records into 2 different files based on values in the file...
Say I have records AUS and UK in my lookup file...
So my ODI routine should send all records with country into file1 and rest to file2.
So from above records
File1:
300 UK
200 AUS
File2:
100 USA
200 USA
Can you help me how to achieve this?
Thanks,
Sam

1. where and how do i create filter to restrict countries? In source or target? Should I include some kind of filter operator in interface.
You need to have the Filter on the Source side so that we can filter records accordingly the capture the same in the File. To have a Filter . In the source data store click and drag the column outside the data store and you will have Cone shaped icon and now you can click and type the Filter.
Please look into this link for ODI Documentation -http://www.oracle.com/technetwork/middleware/data-integrator/documentation/index.html
Also look into this Getting started guide - http://download.oracle.com/docs/cd/E15985_01/doc.10136/getstart/GSETL.pdf . You can find information as how to create Filter in this guide.
2. If I have include multipe countries like (USA,CANADA,UK) to go to one file and rest to another file; Can I use some kind of lookup file...? Instead of modifying filter inside interface...Can i Update entries in the file?
there are two ways of handling your situation.
Solution 1.
1. Create Variable Country_Variable
2. Create a Filter in the Source datastore in the First Interface ( SOURCE.COLUMN = #Country_Variable)
3. Create a new Package Country File Unload
4. Call the Variable in Country_Variable in Set Mode and provide the Country (USA )
5. Next call the First Interface
6. Next call the Second Interface where the Filter condition will be ( SOURCE.COLUMN ! = #Country_Variable )
7. Now run the package .
Solution 2.
If you need a solution to handle through Filer.
1. Use this Method (http://odiexperts.com/how-to-refresh-odi-variables-from-file-%E2%80%93-part-1-%E2%80%93-just-one-value ) to call the File where you wish to create store the country name into the variable Country_Variable
2. Pretty much the same Create a Filter in the Source datastore in the First Interface ( SOURCE.COLUMN = #Country_Variable)
3.Create a new Package Country File Unload
4.Next call the Second Interface where the Filter condition will be ( SOURCE.COLUMN ! = #Country_Variable )
5. Now run the package .
Now through this way using File you can control the File.
Please try and let us know , if you need any other help.

Limiting the values in a lookup table

Hello everyone.
I was wondering if it is possible to limit the selectable values in a lookup table based on certain criteria, foremost the content of a separate field.
Example:
A product has a measurement key that determines which sizes are valid for a given product.
Is it possible for MDM to read this key and filter the values of the table holding all the values for all keys?
Hope that was somewhat clear what I'm trying to do.
Best regards,
Anders

Hello Andres:
I believe that what you should do is to place all the products types into Categories. There, you can give different attributes to each product and therefore, limit what the user can choose as its values.
For instance, you have two products A and B. Each one would have a separate "Measure" field.
Create Categories:
Cat_A
Cat_B
with separate attributes:
Cat_A
|____ Measure_A
Cat_B
|____ Measure_B
And in each Measure <b>Attribute</b> (not field) you can specify the correct values for each category (i.e Product type)
When the user chooses Cat_A as the product type, the Measure_A will appear, with its values. The same will happend for Cat_B
I hope that helps
Regards
Alejandro

Creates new record in the Qualifier Table while importing.

Hi Guys,
When sending new bank details to MDM, then MDM creates a new record in the Bank Detail qualified lookup table. This is OK. But when sending exactly same bank details again to MDM, then MDM creates again a new record in the Bank Detail qualified lookup table. I would expect that it
first performs the Automap and only if it cannot find a value, it will add a new record!
Can you guys help me out from this?
Best Regards
Devaraj PK

Hi Devaraj,
Please check these configuration options of Import Manager
1. Default Qualified Update - The default setting for whether incoming source subrecords either are appended to, completely replace,or update the set of existing qualified links of a qualified lookup field when updating existing records.
2. Default Matching Qualifiers - The default setting for which qualifiers to use as matching qualifiers when matching existing qualified links when updating existing records.
Any operation on the qualified tables will depend on the above two options.
Reward if found useful
Regards,
Jitesh Talreja

Merging two records in a single record for the same matnr,werks and bwart.

Hi I have a requirement to merge two records into one single record using the quantity field from MSEG table.
I am selecting two records from the table MSEG. Now for these two records i have to add the quantity values into one variable.
Then there should be only one record for the same matnr,werks,bwart.
Any suggestion would be appreciated.
Regards,
Amit

hi,
You can COLLECT statement only if all non key fields are numeric.
This statement Adds all such fields and give us a single record.
Regards
Sumit Agarwal

Chart to follow the table

Hi SDN,
We have a web app in which a table and a chart below are both sourced by the same data provider. The columns in the table are fiscal periods and no. of periods display at once are 5.
We just noticed that when we scroll through the table by columns, the chart does not follow the scroll.
So if table was showing Jan thru May data the chart showed the bars accordingly. But now if you scroll and table now shows months February through June, the chart does not follow and still shows bars for January thru May.
Please help.
Saf.

Chart will always display the data for the entire data provider, it will not have the scroll option.

Creation of indexes in tables

SAP 4.7 6.20 Oracle 10g Windows Server 2003
Our SAP system was based on SQL.
Last month it was changed to Oracle 10g.
We really have a lot of developments ( Z programs ), and it's normal for us to create indexes some times.
But I don't know if we are supposed to change our habits from now on because of Oracle.
I have 2 questions :
1) Is the creation of indexes in tables so effective in Oracle as it was for SQL databases ?
2) When I create an index, Am I supposed to use the field MANDT as part of the index ?
Eduardo

Hi,
We are on Oracle 10.2.4.0 .My answers for point
1. Ensure that oracle patches are up-to-date. Also oracle parameters are set correctly.There is one S-note(do not remember right now) which has script file which you can run on your system to find if oracle parameters are set according to recommendation.
2. Mandt can be used in Z programs.Not a problem.
For future: Analyze Expensive SQl statements with the help of St03N and St04 for next2-3 months and tune them.
Does it help

Stored procedure to identify column names from a lookup table

I have a working PL/SQL stored proc as below:
CREATE OR REPLACE PROCEDURE PROC_TEST IS
CURSOR GET_TEST_VALUES IS
SELECT
MF_master.comp_service_b,MF_master.normal_form_amount_b, MF_master.plan_id_b, MF_master.plan_percentage_b, MF_master.plan_service_b,MF_master.autoid,     ORA_master.comp_service_v, ORA_master.normal_form_amount_v,
ORA_master.plan_id_v, ORA_master.plan_percentage_v,
ORA_master.plan_service_v, ORA_master.autoid,     ORA_master.test_var     FROM MF_master, ORA_master
WHERE ((MF_master.autoid = ORA_master.autoid));
BEGIN
FOR REC IN GET_TEST_VALUES LOOP
begin
if rec.test_var='SVC' then
if (to_number(rec.plan_service_b) = to_number(rec.plan_service_v) ) and
(to_number(rec.comp_service_b) = to_number(rec.comp_service_v) ) then
update ORA_master set status_v = 'COMPLETE',last_updt_user_v = 'PROCEDURE',last_updt_date_v = SYSTIMESTAMP where autoid = rec.autoid;
else
update ORA_master set status_v = 'INCOMPLETE',last_updt_user_v = 'PROCEDURE',last_updt_date_v = SYSTIMESTAMP where autoid = rec.autoid;
end if;
end if;
if rec.test_var = 'TERM' then
if (to_number(rec.plan_percentage_b) = to_number(rec.plan_percentage_v) ) and
(to_number(rec.normal_form_amount_b) = to_number(rec.normal_form_amount_v) )
then
update ORA_master set status_v = 'COMPLETE',last_updt_user_v = 'PROCEDURE',last_updt_date_v = SYSTIMESTAMP where autoid = rec.autoid;
else
update ORA_master set status_v = 'INCOMPLETE',last_updt_user_v = 'PROCEDURE',last_updt_date_v = SYSTIMESTAMP where autoid = rec.autoid;
end if;
end if;
     end;
     END LOOP;
     COMMIT;
END;
What I am doing here is, if test_var = 'SVC', I am comparing 2 columns, plan_service_b and comp_service_b(with plan_service_v and
comp_service_v)
Similarly, for test_var = 'TERM', it is plan_percentage_b and normal_form_amount_b(with plan_percentage_v and normal_form_amount_v)
The above works fine as of now, but I am looking for a way to make this design more dynamic. In other words, these comparison columns may change from time
to time and each time something changes, I will have to change this code. Rather, I am looking for a way to have the comparison columns in a
lookup table that I can query to get what needs to be compared.
My thought is :
CREATE TABLE COMPARISON_COL_LOOKUP
(test_var VARCHAR2(10),
MF_column VARCHAR2(30),
ORA_column VARCHAR2(30) );
And then, insert
INSERT INTO COMPARISON_COL_LOOKUP ('SVC','PLAN_SERVICE_B','PLAN_SERVICE_V');
INSERT INTO COMPARISON_COL_LOOKUP ('SVC','COMP_SERVICE_B','COMP_SERVICE_V');
INSERT INTO COMPARISON_COL_LOOKUP ('TERM','PLAN_PERCENTAGE_B','PLAN_PERCENTAGE_V');
INSERT INTO COMPARISON_COL_LOOKUP ('TERM','NORMAL_FORM_AMOUNT_B','NORMAL_FORM_AMOUNT_V');
commit;
In this way, when tomorrow, when something changes - like new columns need to be compared for SVC or TERM, OR, if any comparisons need to
be removed, all I need to do is to change the data in this lookup table !
Now here's my question --- If I have this lookup table, how best can I update my above stored procedure to use this lookup table so that I don't need to
hard-code the column names for comparison ?
Any thoughts/suggestions are appreciated.

While it is certainly technically possible to use dynamic SQL here, I would suggest that you make absolutely certain that you're not making things unnecessarily complicated...
Dynamic SQL is generally substantially harder to write, debug, and maintain than equivalent static SQL. In addition, it takes a lot more work to ensure that dynamic SQL performs as well as static SQL (i.e. you now have to explicitly use bind variables) and that you're not introducing security holes via SQL injection.
If your comparisons are likely to change infrequently, and particularly as those changes would imply changes to the underlying requirements, I would tend to be biased toward keeping the working procedure and just planning on making code changes periodically.
Of course, not knowing your particular requirements, I certainly can't be certain that dynamic SQL would be inappropriate here, but I have seen lots of folks unnecessarily complicate their systems by building overly flexible systems that were painful to support and extend.
Justin

Creating HEX lookup table

Hi,
iam trying to create a lookup table for HEX values but the LUT is taking only decimal values.... here is the problem
Iam getting HEX data from a serial port...........Now with respect this data i have to compare with the LUT and has to display the respective data(result)
LOOKUP TABLE should be like this
LUT X X data
00                       1435.0
01                       1435.5
02    1436.0
C7    1534.5
C8    1535.0
some 200 values.................
now from serial port say C7 is coming ,,,,,,its has to compare with the LUT(200 values) and has to display its corresponding value which 1534.5
please tell me how i have to approach this?????????? now iam using control design and simulation toolkit also(in this LUTs of 1D,2D,3D are avaliable)
ThankYou

Multiply all of your X data by ten (store 1435.5 as 14355) then divide by ten when you take it out.
I'm only familiar with LUTs in FPGA programming (I have at least one week of experience doing this), and don't have either toolkit at home. Hope this helps.
Jim
Jim
You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice

Orcl:lookup-table issue

Hi All,
I am trying to use the orcl:lookup-table for a view, where i pass an id and return the template no.
orcl:lookup-table("CCS_DFLT_TEMP_BY_PERSON","EMPLID",ns0:emplid,"UP_TEMPLATE_NO","jdbc/PersonStore")
Problem is that the CCS_DFLT_TEMP_BY_PERSON is a view and not a table.
Any ideas on how i can solve this issue. I have a collection of data and i loop through the data in my transformation and hence why i need to lookup-table to work for a view.
many thanks
K

done

How to update all the record for a particular column in a table based on search criteria.

Hi All,
I am new to ADF. I have a requirement, where i have to perform mass update on a table.
Scenario:
Ex: I have a dept manual search region. where i search with deptId: 20. I get 20 records in my table. now i have another region where i have a inputchoice list which contains all the columns names that exists in dept table. Beside that i have a input text box and an update button
Now user, first searches with dept id:20 and clicks on search button, where it shows 20 record in the table. He then select a column from input choicelist(ex: ManagerId), then enters new value in the input box(ex: abc) then clicks on update button.
Now i want, all the records in the ManagerId column with dept id:20 to be updated with the new value "abc"
Can anyone help me with the code.
Thanks in advance..

Hi,
If you go to your VO and generate the ViewObjectImpl, in there you can create a method which will contain two parameters, 1 the attribute name and 2 the value.
Then you can follow something like explained in this post:
ADF Tutorial: How to apply bulk actions to a view object rows
The only difference is that you will need to create a method like this:
public void updateAttribute(String attribute, Integer value){
        RowSetIterator iter = createRowSetIterator(null);
        while (iter.hasNext()){
            Row row = iter.next();
            row.setAttribute(attribute, value);
Then you expose that as a client interface and then after you filter your table by your criteria you just need to execute this method passing the right parameters.
Regards

Search for records in the event viewer after the last run (not the entire event log), remove duplicate - Output Logon type for a specific OU users

Hi,
The following code works perfectly for me and give me a list of users for a specific OU and their respective logon types :-
$logFile = 'c:\test\test.txt'
$_myOU = "OU=ABC,dc=contosso,DC=com"
# LogonType as per technet
$_logontype = @{
2 = "Interactive"
3 = "Network"
4 = "Batch"
5 = "Service"
7 = "Unlock"
8 = "NetworkCleartext"
9 = "NewCredentials"
10 = "RemoteInteractive"
11 = "CachedInteractive"
Get-WinEvent -FilterXml "<QueryList><Query Id=""0"" Path=""Security""><Select Path=""Security"">*[System[(EventID=4624)]]</Select><Suppress Path=""Security"">*[EventData[Data[@Name=""SubjectLogonId""]=""0x0""
or Data[@Name=""TargetDomainName""]=""NT AUTHORITY"" or Data[@Name=""TargetDomainName""]=""Window Manager""]]</Suppress></Query></QueryList>" -ComputerName
"XYZ" | ForEach-Object {
#TargetUserSid
$_cur_OU = ([ADSI]"LDAP://<SID=$(($_.Properties[4]).Value.Value)>").distinguishedName
If ( $_cur_OU -like "*$_myOU" ) {
$_cur_OU
#LogonType
$_logontype[ [int] $_.Properties[8].Value ]
#Time-created
$_.TimeCreated
$_.Properties[18].Value
} >> $logFile
I am able to pipe the results to a file however, I would like to convert it to CSV/HTML When i try "convertto-HTML"
function it converts certain values . Also,
a) I would like to remove duplicate entries when the script runs only for that execution.
b) When the script is run, we may be able to search for records after the last run and not search in the same
records that we have looked into before.
PLEASE HELP !

If you just want to look for the new events since the last run, I suggest to record the EventRecordID of the last event you parsed and use it as a reference in your filter. For example:
<QueryList>
<Query Id="0" Path="Security">
<Select Path="Security">*[System[(EventID=4624 and
EventRecordID>46452302)]]</Select>
<Suppress Path="Security">*[EventData[Data[@Name="SubjectLogonId"]="0x0" or Data[@Name="TargetDomainName"]="NT AUTHORITY" or Data[@Name="TargetDomainName"]="Window Manager"]]</Suppress>
</Query>
</QueryList>
That's this logic that the Server Manager of Windows Serve 2012 is using to save time, CPU and bandwidth. The problem is how to get that number and provide it to your next run. You can store in a file and read it at the beginning. If not found, you
can go through the all event list.
Let's say you store it in a simple text file, ref.txt
1234
At the beginning just read it.
Try {
$_intMyRef = [int] (Get-Content .\ref.txt)
Catch {
Write-Host "The reference EventRecordID cannot be found." -ForegroundColor Red
$_intMyRef = 0
This is very lazy check. You can do a proper parsing etc... That's a quick dirty way. If I can read
it and parse it as an integer, I use it. Else, I just set it to 0 meaning I'll collect all info.
Then include it in your filter. You Get-WinEvent becomes:
Get-WinEvent -FilterXml "<QueryList><Query Id=""0"" Path=""Security""><Select Path=""Security"">*[System[(EventID=4624 and EventRecordID>$_intMyRef)]]</Select><Suppress Path=""Security"">*[EventData[Data[@Name=""SubjectLogonId""]=""0x0"" or Data[@Name=""TargetDomainName""]=""NT AUTHORITY"" or Data[@Name=""TargetDomainName""]=""Window Manager""]]</Suppress></Query></QueryList>"
At the end of your script, store the last value you got into your ref.txt file. So you can for example get that info in the loop. Like:
$Result += $LogonRecord
$_intLastId = $Event.RecordId
And at the end:
Write-Output $_intLastId | Out-File .\ref.txt
Then next time you run it, it is just scanning the delta. Note that I prefer this versus the date filter in case of the machine wasn't active for long or in case of time sync issue which can sometimes mess up with the date based filters.
If you want to go for a date filtering, do it at the Get-WinEvent level, not in the Where-Object. If the query is local, it doesn't change much. But in remote system, it does the filter on the remote side therefore you're saving time and resources on your
side. So for example for the last 30 days, and if you want to use the XMLFilter parameter, you can use:
<QueryList>
<Query Id="0" Path="Security">
<Select Path="Security">*[System[TimeCreated[timediff(@SystemTime) <= 2592000000]]]</Select>
</Query>
</QueryList>
Then you can combine it, etc...
PS, I used the confusing underscores because I like it ;)
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

How do I get rid of Yahoo search from starting in the creation of a new tab?

my home page works correctly and I have removed the Yahoo tool bar from plugins/apps (can't remember which) But whenever I open a new tab it opens on this
http://search.yahoo.com/?fr=freeze&type=W3i_NA,132,3_6,Tab%20Search,20110520,16934,0,19,0
I would like it to open on my home page, which firefox does on startup. But I can't find a setting in options that will allow you to dictate what first appears when opening a new tab.
I tried this solution but it didn't work
https://support.mozilla.com/en-US/questions/811550?s=getting+rid+of+yahoo+search&as=s

Do you also have a search bar on your tabs bar if so, it is probably "New Tab" extension, but suggest going through all of the following.
'''Remove the Yahoo Toolbar'''
# "Ctrl+Shift+A" (Add-ons Manager)
# Select Puzzle piece on left-side for Extensions List
# Find "Yahoo Toolbar" and click on "Uninstall" button, and restart Firefox. ''(if you really need to keep the Yahoo toolbar, you can hide the toolbar instead with customize, and still change all the search defaults as below)''
'''Then to fix the default search engine''' used at the Location Bar, change the value of '''keyword.URL''' in '''about:config''' to one of the values shown in [http://kb.mozillazine.org/Location_Bar_search#Location_Bar_search_.28external_-_search_engine.29 Location Bar search] at MozillaZine.
* Google Search (Google search results page)<br>'''http://www.google.com/search?ie=UTF-8&oe=UTF-8&q='''
# type in '''about:config''' into the location bar (in a new tab)
# if the warning message nonsense comes up ''uncheck'' the box '''before''' dismissing the dialog message
# '''filter on keyword'''
# right-click on '''keyword.URL''' and choose "modify" then paste in the Google search engine string of your choice.
# '''filter on defaulturl'''
# right-click on '''browser.search.defaulturl''' ''(if it exists)''and again choose "modify" then paste in the Google search engine string of your choice.
# '''filter on ytff'''
# right-click on '''yahoo.ytff.search.popup_src''' ''(if it exists)'' and again choose "modify" then paste in the Google search engine string of your choice, if adventurous might see if "reset" would remove and see if gone in next session (well not for those keeping the extension).<br
>--above used in https://support.mozilla.com/questions/850287
#If new tabs open with a Yahoo search, then in "C:\program files\Mozilla Firefox: Find the yahoo.xml file and delete it ([/questions/892957])
#If you find an extension call "New Tab" uninstall it (it is unwanted malware), this little gem came with a reinstall of "PicPick" software for me and adds a search bar to the already overcrowed tabs bar, when doing the reinstall update for PicPic do a custom install without anything relating to yahoo.
'''Avoiding the problems:''' Many software installations contain additional baggage known as crapware. The Yahoo Toolbar is packaged with Java [http://imageshack.us/photo/my-images/266/javainstall.png/ picture]
More information on ask.com, Yahoo Toolbars which involve extensions, not just changes to the home page.
* http://kb.mozillazine.org/Problematic_extensions
* Uninstalling toolbars - MozillaZine Knowledge Base<br>http://kb.mozillazine.org/Uninstalling_toolbars

How to create Child record at the time of master record creation.

Hi,
I have MasterVO and ChildVO. And association between both are 1 to *. I have a requirement like, I need to create row in ChildVO at the time of MasterVO row creation.
I have used entity based association to create view link. This view link created ChildVO accessor in MasterRowImpl as type RowIterator.
Actually my idea is to override create method in MasterVORowImpl and call ChildVO ViewObject and call .createRow() method on it. But I don't have access to ViewObject, instead it gave access to RowIterator.
Could you please provide any pointer to achieve above functionality?
Many thanks in advance.
Jdev version - 11.1.1.7.0
Regards,
Dileep.

Hi Tim,
Now it is creating child record at the time of master row creation. But it is working only through BC tester. But when I drag the child VO instance in the jsff page, only master is get created as editable only, child is displayed as read only without populating any default values like child VO surrogate key and other default attributes. But through BC tester it is working fine.
Am I missing anything here while implementing in UI?
Thanks,
Dileep.

Searching Records Following the Creation of a Lookup Table

Similar Messages

Maybe you are looking for