Inserting records in the ABAP exit function (hashed table XTH_DATA)

Hi all,
I want to add records in the logic of an ABAP exit function. Due table XTH_DATA being a hashed table the normal insert or append is not possible.
My logic MUST move the data to a temporary table (ITAB) where the logic is executed (modifying KYF values and creating new records.
In order to quickly get to a result I have solved the problem in an awful way through hardcoding the structure of ITAB to be the same as XTH_DATA is in this specific case.
I would like to know if someone has an exmaple of a nice way to dynamically create an ITAB with the structure of XTH_DATA?
At the end it should be possible to do: XTH_DATA[] = itab[].
Greetings,
Martin

Hi Martin,
the only way I know is to solve this problem with sort of pointers, field symbols. Roughly spoken the idea is you lookup the structure of xth_data in table dd03l. you define an internal table of type any. you loop around your xth_data table and assign the value of each column of xth_table to your internal table. then you do your your adding. Hopefully then you can simply assign xth_data to your itab.
regards,
Jürgen

Similar Messages

Inserting records in the table

Hi All,
I am working on a report where we are inserting huge numbers of records from an internal table to the ztable, I have been advised that rather than inserting all the records at one time we should divide the recods into small blocks may be let's say 100,000 of each block and try inserting the blocks in the ztable. So I was just wondering if anyone of you can help me with this how can I get this?
my internal table is it_data_table and my ztable is z_data_table.
Thanks,
Rajeev

Hi,
Rather than inserting records from the workarea it is better if you use the inetrnal table for insertion. If youu have say 50025 records than it will hit the database that many times which definitely is a performance issue.If you have an internal table say 'it' and another internal table 'it_temp' with a similiar structure, you can try something like as follows
loop at it.
count = count + 1.
it_temp = it.
append it_temp.
if count = 10000.
insert ztable from table it_temp accepting duplicate keys. "to avoid a dump if there are duplicates count = 0.
refresh it_temp.
endif.
endloop.
if it_temp is not initial.
insert ztable from table it_temp accepting duplicate keys.
endif.
In the above code the loop will run the number of record times but, the insert statement will run only 50025/10000 times (i.e, 5 times). After the completion of the loop we need to add the remaining 25 records (because insert will work last inside the loop when 50000 records are reached), for that we will issue the insert statement after completion of the loop, after checking the it_temp table. So the total of 50025 records would be entered in a batch of 6 inserts rather than that many inserts if using just the workarea.
I hope this does help you in your issue.
Thanks and Regards,
Sachin.

How to find last inserted record in the table.

Version: Oracle 10g
I have a table called "Manufacture" and 3 columns as mfno,itemname,quantity.
How to find last inserted record in the table "Manufacture".
As i come to know that Rowid is not result perfect results. Please provide your inputs.

user13416294 wrote:
Version: Oracle 10gThat is not a version. That is a product name. A version is 10.1.0.2 or 10.2.0.4, etc.
I have a table called "Manufacture" and 3 columns as mfno,itemname,quantity.
How to find last inserted record in the table "Manufacture".Not possible as your data model does not cater for it. That simple.
If there is a need to determine some order or associate some time to an entity, then that should be part of the data model - and a relationship, or one or more attributes are needed to represent that information. Thus your data model in this case is unable to meet your requirements.
If the requirements are valid, fix the data model. In other words - your question has nothing to do with Oracle and nothing to do with rowid, rowscn or other pseudo columns in Oracle. It is a pure data modeling issue. Nothing more.

ZSD_TABLE is not defined in the ABAP dictionary as a table"

Hello,
I created zsd_table and inserted few records
When i use this table in program system is giving error message "ZSD_TABLE is not defined in the ABAP dictionary as a table"
How can we define this table in ABAP dictionary?
Thanks

Hi,
Go to Transaction SE11
Give the table name 'ZSD_TABLE'
and click on create and enter the fileds
after entering fields give 'techinical setting' for a table by clicking on technical setting button on tool bar
save check and activate
Regards
Krishna

Copy Function using ABAP Exit Function

Hi Experts,
I am trying to write a copy function using Exit Function (ABAP Code) for BPS-BW. Can anyone suggest me any how-to document provided by SAP for this purpose which mentions the standard steps as well as exactly where to change if I want to change some characteristics values. e.g. I would like to copy from one submission to another, so I would like to change the values of the characteristics SUBMISSION.
Points will be rewarded.
Thanks in advance

Or alternatively you can suggest me, what changes do I need to make in the following code if I want to append to the xth_data rather than replacing the values. I want to use it for copy purpose to want to add extra record in the cube with modified characteristic value rather than replacing the first with the second.
""Local Interface:
*" IMPORTING
*"     REFERENCE(I_AREA) TYPE UPC_Y_AREA
*"     REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
*"     REFERENCE(I_METHOD) TYPE UPC_Y_METHOD
*"     REFERENCE(I_PARAM) TYPE UPC_Y_PARAM
*"     REFERENCE(I_PACKAGE) TYPE UPC_Y_PACKAGE
*"     REFERENCE(IT_EXITP) TYPE UPF_YT_EXITP
*"     REFERENCE(ITO_CHASEL) TYPE UPC_YTO_CHASEL
*"     REFERENCE(ITO_CHA) TYPE UPC_YTO_CHA
*"     REFERENCE(ITO_KYF) TYPE UPC_YTO_KYF
*" EXPORTING
*"     REFERENCE(ET_MESG) TYPE UPC_YT_MESG
*" CHANGING
*"     REFERENCE(XTH_DATA) TYPE HASHED TABLE
FIELD-SYMBOLS: <ls_data> TYPE ANY,
<ch_struct> TYPE ANY,
<cl_coorder> TYPE ANY.
LOOP AT xth_data ASSIGNING <ls_data>.
now <ls_data> points to a line of xth_data and can
be used to reference each characteristic and/or
keyfigure contained within.
choose first structure which contains the characteristics.
ASSIGN COMPONENT 'S_CHAS' OF STRUCTURE <ls_data> TO
<ch_struct>.
*Assign fields for value assignment in the record (ls_data)
choose the characteristic '0COORDER' (use uppercase)
ASSIGN COMPONENT '0COORDER' OF STRUCTURE <ch_struct> TO
<cl_coorder>.
*<cl_coorder> now contains the value of the internal order in the
*record...
*Make the changes in the values
<cl_coorder> = '2'.
When I am changing <cl_coorder> value to '2', I want it to get appened to xth_data as an additional record. That means the earlier <cl_coorder> value must be available in the cube as it is. What changes do I need to do in the code, please suggest.

Adding Records In The User Exit

I have a requirement to modify the transactional data user exit 0CO_PC_PCP_01. Currently this datasource extracts cost estimate data and using some complex rules I need to determine the active cost estimate for each month and duplicate the records according.
ie if a cost estimate dated 01.01.2005 is valid for all of 2005 then I need to duplicate all corrsponding records 11 times ie one set of additional records per month.
I have created the ABAP code to do this and for small volumes of data it works perfectly. However if I increase the data volume the exit seems to run and run.
The code is as efficient as it can be and there are no database selects within it.
My questions are:
1)is it acceptable to add a high volume of new data in the user exit or should I be looking at an alternative.
2) Does the user exit get called multiple times during a dataload. ie once per datapackage. If so then am I correct in saying it is dangerous to add records this way because some of the records added could already exist and be processed within another datapackage and therefore records would then be duplicated.
3) One approach I have thought of but not yet tested is to use the function module(s) used by the SAP standard extractor to populate a table on R3 and then use a custome datasource to retrieve the data from this table.
Any thoughts/views/answers on the above would be appreciated.
Many thanks

Simon,
1. Lets say that the datapacket size is 20000 and all of your records are active. Then when it exits the user exit, the size of the datapacket would be 20000 X 12. that is a very large packet. Probably not a good idea to do this.
2. The user exit will be called for each datapacket. That is correct and yes, it would be wrong to do this in a datapaket. If a record exists in two datapackets, then records are generated for this multiple times.
3. Why are you not considering applying the logic in BW rather than doing it in R/3. That should be relatively easy.
This is how you can do it. When loading the data into BW, load it into an ODS object. Add a new Infoobject to the ODS object (ZACTIVE) for example. In the update rules between infosource and ODS, apply the logic that you are using to determine if each record is active or not. Now from this ODS, load it to either INfoCube or ODS, wherver you want to. In the update rules between the two, you can use the "return table" to generate multiple records where ZACTIVE = true, or you can generate in the start routine instead.
By doing this you emilinate the case of generating duplicate records.
Hope that helps.
Gova

How to insert records into the Table?

Dear Sir,
I'm new to JDeveloper. Now I managed to create a Frame in JDeveloper with many Text fields and a button. In the back end, I have a procedure to insert records to a table, to which I pass the values of the fields as parameters. Now I'm not getting the steps to call the PL/SQL Stored procedure when I click on the button. I'm using Oracle 9i JDeveloper version 9.0.3.1. and Oracle 9i Database.
Please give me the complete steps to achieve my task - it is quite urgent.
Thanking You in advance.
Regards,
Senthil .A. Perumal.

The JDBC tutorial will show you how to call a stored procedure from Java:
http://download-west.oracle.com/docs/cd/B10501_01/java.920/a96654/basic.htm
One more thing, why are you using such an old version of JDeveloper? any reason not to upgrade to the 10.1.3 version of JDeveloper?
Also you might want to look into ADF and how it makes these type of database interactions easier.
See this demo:
http://www.oracle.com/technology/obe/obe1013jdev/adf_swing/master_detail_page_adfswing_bc.htm

How to access BPS variables in ABAP Exit Function

Hi Experts,
I am using a Exit Function. My BPS variables contain multiple values. I want to trasfer then (may be directly read) to an internal table from where I can loop over then.
Could you please suggest me the code for this?
Points will be awarded.
Thanks in advance,
Shiwesh

Did you try using the FMs API_SEMBPS_VARIABLE_GETDETAIL or Z_VARIABLE_GET_DETAIL for this?

How to insert record inside the internal table in below code

Hi all,
My requirement is to find the sub-total and need to insert in between the internal table.
You can see the output ....where I want the sub-total F2 when 1 & 2 combindely , 3 , 4& 5 combindely .Please check it and let me know is it possible
when i am using modification it is not creating extra row inside the table instead it is modifying one row and putting the total there.
For ex: the origianl output is
F1   F2       F3
A      1          1
B      1          1
F      2          1
D      3          1
E      4          1
C      5          1
We want to display all the total of f2 of 1-2 , 3 , 4-5
so expcected output is
F1   F2       F3
A      1          1
B      1          1
F      2          1
     *              3 ->This is the sub-total of 1& 2 of f2
D      3          1
        *           1 ->this is the sub-total of 3
E      4          1
C      5          1
      *             2 -> this is the sub-total of 4 & 5
= space
But coming output is
A 1          1
B 1          1
*             3 -> it is modifying the F row and inserting the total .Total is comong correct but is shoule insert instead of modifying the record!!
*           1
E 4          1
*             2
Please help how to insert the row total at the end of the chage of field
Please find the below code ..Due to space problem i am attaching below
Sas

Here is the solution ....i Got the answer Thanks for your helping hands friends
REPORT YTEST_MODIFY.
DATA: BEGIN OF ITAB OCCURS 1,
TOT TYPE C,
F1 TYPE C,
F2 TYPE C,
F3 TYPE I ,
END OF ITAB.
DATA: BEGIN OF JTAB OCCURS 1,
F1 TYPE C,
F2 TYPE C,
F3 TYPE I ,
END OF JTAB.
START-OF-SELECTION.
ITAB-F1 = 'A'.
ITAB-F2 = 1.
ITAB-F3 = 1.
APPEND ITAB.
ITAB-F1 = 'B'.
ITAB-F2 = 1.
ITAB-F3 = 1.
APPEND ITAB.
ITAB-F1 = 'C'.
ITAB-F2 = 5.
ITAB-F3 = 1.
APPEND ITAB.
ITAB-F1 = 'D'.
ITAB-F2 = 3.
ITAB-F3 = 1.
APPEND ITAB.
ITAB-F1 = 'E'.
ITAB-F2 = 4.
ITAB-F3 = 1.
APPEND ITAB.
ITAB-F1 = 'F'.
ITAB-F2 = 2.
ITAB-F3 = 1.
APPEND ITAB.
SORT ITAB BY F2.
LOOP AT ITAB.
    WRITE:/1 ITAB-F1 ,
          8 ITAB-F2 ,
          10 ITAB-F3 .
ENDLOOP.
LOOP AT ITAB.
    IF ITAB-F2 = 1 OR ITAB-F2 = 2.
      ITAB-TOT = 1.
      MODIFY ITAB.
    ELSEIF ITAB-F2 = 3.
      ITAB-TOT = 3.
      MODIFY ITAB.
    ELSEIF ITAB-F2 = 4 OR ITAB-F2 = 5.
      ITAB-TOT = 4.
      MODIFY ITAB.
    ENDIF.
ENDLOOP.
SKIP 2.
SORT ITAB BY TOT.
DATA : L_SUM(2) TYPE C,
         L_ROW(2) TYPE C.
LOOP AT ITAB.
    MOVE-CORRESPONDING ITAB TO JTAB.
    APPEND JTAB.
    L_SUM = L_SUM + ITAB-F3 .
    AT END OF TOT.
      CLEAR JTAB.
      JTAB-F3 = L_SUM .
      APPEND JTAB.
      CLEAR L_SUM.
    ENDAT.
ENDLOOP.
LOOP AT JTAB.
    WRITE:/1 JTAB-F1 ,
          8 JTAB-F2 ,
          10 JTAB-F3 .
ENDLOOP.
* DATA: a TYPE i , b .
* LOOP AT itab.
*    IF b = 0.
*      a = a + itab-f3.
*    ENDIF.
*    AT END OF tot.
*      MOVE space TO itab-f1.
*      MOVE space TO itab-f2.
*      MOVE a TO itab-f3.
*      MODIFY itab .
*      CLEAR a.
*      b = 1.
*    ENDAT.
*    b = 0.
* ENDLOOP.
* LOOP AT itab.
*    MOVE-CORRESPONDING itab TO jtab.
*    APPEND jtab.
* ENDLOOP.
* ULINE.
* LOOP AT jtab.
*    WRITE: / jtab-f1 , jtab-f2 , jtab-f3.
* ENDLOOP.

How to Debug the DMEE exit function module

Hi All,
I wants to Debug the DMEE tree exit function module.
Could you please guide me.
Regards,
Seshadri

Put a BREAK USER in User-Exit.
Once the system enters into debugging mode,
in debuger on setting tab,
check the Update Debugging and System Debugging.
Regards
Bala Krishna

How to insert records with LONG RAW columns from one table to another

Does anybody know how to use subquery to insert records with columns of LONG RAW datatype from one table to another? Can I add a WHERE clause in the subquery statement? Thanks.

Insert into ... Select statements are not supported for long or long raw. You will have to either use PL/SQL or convert your long raw to blobs.

Insert data into the xml schema-based xmltype table problem!

Hello, there,
I got problem in inserting data into the xmltype table after registered XML schema and created table. details see below:
1) xml schema:
<?xml version="1.0" encoding="UTF-8"?>

<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns="http://www.emergis.com/eHealth/EHIP/data/meta/profile:v1" targetNamespace="http://www.emergis.com/eHealth/EHIP/data/meta/profile:v1" elementFormDefault="qualified">
     
     <xs:simpleType name="RoutingType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="Synch"/>
               <xs:enumeration value="Asynch"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="StatusType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="ACTIVE"/>
               <xs:enumeration value="VOID"/>
               <xs:enumeration value="PENDING"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="SenderApplicationType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="PR"/>
               <xs:enumeration value="CR"/>
               <xs:enumeration value="POS"/>
               <xs:enumeration value="CPP"/>
               <xs:enumeration value="Other"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="ServiceTypeType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="IS"/>
               <xs:enumeration value="WS"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="RouteDirect">
          <xs:restriction base="xs:string">
               <xs:enumeration value="Request"/>
               <xs:enumeration value="Reply"/>
               <xs:enumeration value="None"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="Indicator">
          <xs:annotation>
               <xs:documentation>can we also change the value to "ON" and "OFF" instead? in this way this cn be shared by all type of switch indicator</xs:documentation>
          </xs:annotation>
          <xs:restriction base="xs:string">
               <xs:enumeration value="YES"/>
               <xs:enumeration value="NO"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="RuleType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="ControlAct"/>
               <xs:enumeration value="WSPolicy"/>
               <xs:enumeration value="AccessControl"/>
               <xs:enumeration value="Certification"/>
               <xs:enumeration value="MessageConformance"/>
               <xs:enumeration value="Variant"/>
               <xs:enumeration value="Routing"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="HL7Result">
          <xs:restriction base="xs:string">
               <xs:enumeration value="ACCEPT"/>
               <xs:enumeration value="REFUSE"/>
               <xs:enumeration value="REJECT"/>
               <xs:enumeration value="ACK"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="IIPType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="PUT"/>
               <xs:enumeration value="GET/LIST"/>
               <xs:enumeration value="NOTIF"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="ProfileTypeType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="IIPProfile"/>
               <xs:enumeration value="BizOperationProfile"/>
               <xs:enumeration value="OrchestrationProfile"/>
               <xs:enumeration value="DomainObjectProfile"/>
               <xs:enumeration value="ServiceProfile"/>
               <xs:enumeration value="ExceptionProfile"/>
               <xs:enumeration value="CustomizedProfile"/>
               <xs:enumeration value="SystemProfile"/>
               <xs:enumeration value="HL7XMLSchemaProfile"/>
               <xs:enumeration value="EnricherParametersProfile"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="ParameterType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="String"/>
               <xs:enumeration value="Object"/>
               <xs:enumeration value="Number"/>
               <xs:enumeration value="Document"/>
          </xs:restriction>
     </xs:simpleType>
     
     
     
     <xs:complexType name="ProfileType">
          <xs:annotation>
               <xs:documentation>
          1.Profile IS USED TO BE AN WRAPPER ELEMENT FOR ALL KIND OF PROFILES NO MATTER WHAT KIND OF PROFILE IT IS
          2.ProfileID used to uniquely identify the current profile
          3.ProfileData used to hold all the necessary profile related data
          </xs:documentation>
          </xs:annotation>
          <xs:sequence>
               <xs:element name="ProfileID" type="ProfileIDType">
                    <xs:annotation>
                         <xs:documentation>this will hold all the common attributes, espically the global unique identifier to the profile, no matter what type of profile is</xs:documentation>
                    </xs:annotation>
               </xs:element>
               <xs:element name="ProfileData" type="ProfileDataType">
                    <xs:annotation>
                         <xs:documentation>all the non-common profile meta data that attached to each specific profile type such as IIPProfile, OrchestrationProfile, and BizOperationProfile will be placed here</xs:documentation>
                    </xs:annotation>
               </xs:element>
          </xs:sequence>
     </xs:complexType>
     <xs:complexType name="ProfileIDType">
          <xs:annotation>
               <xs:documentation>global unique identifier and all the common attributes across all different profiles, the @ID and @Type together will be used as the primary key to identify the profile data</xs:documentation>
          </xs:annotation>
          <xs:attribute name="ID" type="xs:ID" use="required">
               <xs:annotation>
                    <xs:documentation>ID is the global unique identifier to the profile, no matter what type of profile it is</xs:documentation>
               </xs:annotation>
          </xs:attribute>
          <xs:attribute name="Name"/>
          <xs:attribute name="Description"/>
          <xs:attribute name="Version">
               <xs:annotation>
                    <xs:documentation>version of the profile data</xs:documentation>
               </xs:annotation>
          </xs:attribute>
          <xs:attribute name="Type" type="ProfileTypeType" use="required">
               <xs:annotation>
                    <xs:documentation>value to identify the ProfileType type within
                    IIPProfile,BizOperationProfile,OrchestrationProfile,DomainObjectProfile
                    ServiceProfile,ExceptionProfile,SystemProfile,HL7XMLSchemaProfile,
                    EnricherParametersProfile,CustomizedProfile
                    </xs:documentation>
               </xs:annotation>
          </xs:attribute>
          <xs:attribute name="Status" type="StatusType" default="ACTIVE">
               <xs:annotation>
                    <xs:documentation>used to show the related profile data status like "ACTIVE","PENDING","VOID"...</xs:documentation>
               </xs:annotation>
          </xs:attribute>
          
     </xs:complexType>
     <xs:complexType name="ProfileDataType">
          <xs:annotation>
               <xs:documentation>meta data associated tightly to each specific type of profile</xs:documentation>
          </xs:annotation>
          <xs:choice>
               <xs:element name="EnricherParametersProfileData" type="EnricherParametersDataType">
                    <xs:annotation>
                         <xs:documentation>Enricher Parameters related profile data
               1. one instance of this type may contains all the related System metadata.
               2. idType part may use to identify different version/release/status
               </xs:documentation>
                    </xs:annotation>
               </xs:element>
               <xs:element name="ExtendProfileData" type="ExtendProfileDataType">
                    <xs:annotation>
                         <xs:documentation>If needed, any profile data not defined within the current release scope can be added here </xs:documentation>
                    </xs:annotation>
               </xs:element>
          </xs:choice>
     </xs:complexType>
     <xs:complexType name="ExtendProfileDataType">
          <xs:sequence>
               <xs:element name="ExtendProfile" type="xs:anyType" minOccurs="0"/>
          </xs:sequence>
     </xs:complexType>
     <xs:complexType name="EnricherParametersDataType">
          <xs:sequence>
               <xs:element name="EnricherParameter" type="EnricherParameter" maxOccurs="unbounded"/>
          </xs:sequence>
     </xs:complexType>
     <xs:complexType name="EnricherParameter">
          <xs:sequence>
               <xs:element ref="Enricher"/>
          </xs:sequence>
          <xs:attribute name="serviceName" type="xs:string" use="required"/>
          <xs:attribute name="interactionID" type="xs:string"/>
     </xs:complexType>
     <xs:element name="Enricher">
          <xs:annotation>
               <xs:documentation>Comment describing your root element</xs:documentation>
          </xs:annotation>
          <xs:complexType>
               <xs:sequence>
                    <xs:element name="Parameters" type="Parameters"/>
                    <xs:element ref="Section" maxOccurs="unbounded"/>
               </xs:sequence>
          </xs:complexType>
     </xs:element>
     <xs:complexType name="ValueType">
          <xs:attribute name="field" use="required"/>
          <xs:attribute name="value"/>
          <xs:attribute name="action"/>
     </xs:complexType>
     <xs:element name="Section">
          <xs:complexType>
               <xs:sequence>
                    <xs:element name="Value" type="ValueType" minOccurs="0" maxOccurs="unbounded"/>
                    <xs:element ref="Section" minOccurs="0" maxOccurs="unbounded"/>
               </xs:sequence>
               <xs:attribute name="path" use="required"/>
          </xs:complexType>
     </xs:element>
     <xs:complexType name="Parameters">
          <xs:sequence>
               <xs:element name="Parameter" minOccurs="0" maxOccurs="unbounded">
                    <xs:complexType>
                         <xs:attribute name="name" use="required"/>
                         <xs:attribute name="reference"/>
                    </xs:complexType>
               </xs:element>
          </xs:sequence>
     </xs:complexType>
     <xs:complexType name="RuleList">
          <xs:annotation>
               <xs:documentation>an array of rules</xs:documentation>
          </xs:annotation>
          <xs:sequence>
               <xs:element name="Rule" type="RuleProfile" minOccurs="0" maxOccurs="unbounded"/>
          </xs:sequence>
     </xs:complexType>
     <xs:complexType name="RuleProfile">
          <xs:attribute name="RName" use="required"/>
          <xs:attribute name="RType" type="RuleType" use="required"/>
          <xs:attribute name="Status" default="ON">
               <xs:annotation>
                    <xs:documentation>By default is ON (or if is missing)</xs:documentation>
               </xs:annotation>
          </xs:attribute>
          <xs:attribute name="Order"/>
          <xs:attribute name="Direction" type="RouteDirect">
               <xs:annotation>
                    <xs:documentation>Request / Reply</xs:documentation>
               </xs:annotation>
          </xs:attribute>
     </xs:complexType>
     
     
     
     <xs:element name="Profile" type="ProfileType">
          <xs:annotation>
               <xs:documentation>Profile IS USED TO BE AN WRAPPER ELEMENT FOR ALL KIND OF PROFILES NO MATTER WHAT KIND OF PROFILE IT IS</xs:documentation>
          </xs:annotation>
     </xs:element>
</xs:schema>
2)register xml schema:
SQL> begin
2 dbms_xmlschema.registerSchema
3 (
4 schemaurl=>'http://rac3-1-vip:8080/home/'||USER||'/xsd/EHIPProfile_v00.xsd',
5 schemadoc=>xdbURIType('/home/'||USER||'/xsd/EHIPProfile_v00.xsd').getClob(),
6 local=>True,
7 gentypes=>True,
8 genbean=>False,
9 gentables=>False
10 );
11 End;
12 /
PL/SQL procedure successfully completed.
SQL>
SQL>
3) xml data:
<?xml version="1.0" encoding="UTF-8"?>

<Profile xmlns="http://www.emergis.com/eHealth/EHIP/data/meta/profile:v1">
     <ProfileID Type="EnricherParametersProfile" Status="ACTIVE" ID="EnricherPP.ID.0001" Name="EnricherPP.ID.0001" Description="EnricherPP.ID.0001" Version="01"/>
     <ProfileData>
          <EnricherParametersProfileData>
               <EnricherParameter serviceName="LRS_BusinessDomainObject.lrs.businessDomainObject.domainObjectBuilder.concrete.ExceptionCreators:createExceptionV50CategoryCanonicalPart" interactionID="">
               <Enricher>
                    <Parameters>
                         <Parameter name="MESSAGE_ID" reference="test"/>
                    </Parameters>
                    <Section path="HEADER">
                         <Section path="RESPONSE_TYPE">
                              <Value field="value" value="I"/>
                         </Section>
                         <Section path="HL7_STANDARD_VERSION">
                              <Value field="value" value="HL7V3"/>
                         </Section>
                         <Section path="DESIRED_ACKNOWLEDGMENT_TYPE">
                              <Value field="value" value="NE"/>
                         </Section>
                         <Section path="SENDING_NETWORK_ADDRESS">
                              <Value field="value" value=""/>
                         </Section>
                         <Section path="SENDING_APPLICATION_IDENTIFIER">
                              <Value field="root" value="2.16.840.1.113883.3.133.1.3"/>
                              <Value field="extension" value=""/>
                         </Section>
                         <Section path="SENDING_APPLICATION_NAME">
                              <Value field="value" value="NL HIAL"/>
                         </Section>
                    </Section>
               </Enricher>
     </EnricherParameter>
          <EnricherParameter serviceName="LRS_BusinessDomainObject.lrs.businessDomainObject.domainObjectBuilder.concrete.DomainObjectCreators:createFindClientsAssociatedIdentifersRequestObject" interactionID="PRPA_IN101105CA">
               <Enricher>
                    <Parameters>
                         <Parameter name="MESSAGE_ID" reference="test"/>
                    </Parameters>
                    <Section path="HEADER">
                         <Section path="RESPONSE_TYPE">
                              <Value field="value" value="I"/>
                         </Section>
                         <Section path="HL7_STANDARD_VERSION">
                              <Value field="value" value="HL7V3"/>
                         </Section>
                         <Section path="PROCESSING_CODE">
                              <Value field="value" value="T"/>
                         </Section>
                         
                         <Section path="DESIRED_ACKNOWLEDGMENT_TYPE">
                              <Value field="value" value="NE"/>
                         </Section>
                         <Section path="RECEIVER_NETWORK_ADDRESS">
                              <Value field="value" value="prsunew.moh.hnet.bc.ca"/>
                         </Section>
                         <Section path="RECEIVER_APPLICATION_IDENTIFIER">
                              <Value field="root" value="2.16.840.1.113883.3.40.5.1"/>
                              <Value field="extension" value=""/>
                         </Section>
                         <Section path="SENDING_NETWORK_ADDRESS">
                              <Value field="value" value=""/>
                         </Section>
                         <Section path="SENDING_APPLICATION_IDENTIFIER">
                              <Value field="root" value="2.16.840.1.113883.3.133.1.3"/>
                              <Value field="extension" value=""/>
                         </Section>
                         <Section path="SENDING_APPLICATION_NAME">
                              <Value field="value" value="NL HIAL"/>
                         </Section>
                    </Section>
               </Enricher>
     </EnricherParameter>
          <EnricherParameter serviceName="LRS_BusinessDomainObject.lrs.businessDomainObject.domainObjectBuilder.concrete.DomainObjectContentEnrichers:enrichPRRequest" interactionID="">

<Enricher>
     <Parameters>
          <Parameter name="MESSAGE_IDENTIFIER" reference="test"/>
     </Parameters>
     <Section path="HEADER">
          <Section path="HL7_STANDARD_VERSION">
               <Value field="value" value="V3PR2"/>
          </Section>
          
          
          <Section path="PROCESSING_CODE">
               <Value field="value" value="T"/>
          </Section>
          
          <Section path="PROCESSING_MODE_CODE">
               <Value field="value" value="T"/>
          </Section>
          
          <Section path="DESIRED_ACKNOWLEDGMENT_TYPE">
               <Value field="value" value="NE"/>
          </Section>
          
          
          <Section path="RECEIVER_APPLICATION_IDENTIFIER[0]">
               <Value field="root" value="2.16.840.1.113883.3.40.1.14"/>
               <Value field="extension" value="SIT1"/>
          </Section>
          
          <Section path="RECEIVER_APPLICATION_NAME[0]">
               <Value field="value" value="receiverAppName"/>
          </Section>
          
          
          <Section path="RECEIVER_AGENT/RECEIVER_ORGANIZATION/RECEIVER_ORGANIZATION_IDENTIFIER[0]">
               <Value field="root" value="2.16.840.1.113883.3.40.4.1"/>
               <Value field="extension" value="receiverOrgId"/>
          </Section>
          <Section path="SENDING_APPLICATION_NAME[0]">
               <Value field="value" value="NLPRSCLNT"/>
          </Section>
          
          
          <Section path="SENDING_AGENT/SENDING_ORGANIZATION/SENDING_ORGANIZATION_IDENTIFIER[0]">
               <Value field="root" value="2.16.840.1.113883.4.3.57"/>
               <Value field="extension" value="3001"/>
          </Section>
          <Section path="PERFORMER/HEALTHCARE_WORKER_IDENTIFIER[0]">
               <Value field="root" value="2.16.840.1.113883.4.3.57"/>
               <Value field="extension" value="HIAL_USR"/>
          </Section>
     </Section>
     <Section path="PAYLOAD">
          
          
          <Section path="AUDIT[0]/AUDIT_INFORMATION">
               <Value field="code" value="LATEST"/>
               <Value field="codeSystem" value="PRSAuditParameters"/>
          </Section>
          
          <Section path="CONFIDENCE/CONFIDENCE_VALUE">
               <Value field="value" value="100"/>
          </Section>
          
          <Section path="HISTORY/INCLUDE_HISTORY_INDICATOR">
               <Value field="value" value="false"/>
          </Section>
          
          <Section path="JURISDICTION/JURISDICTION_TYPE">
               <Value field="value" value="NL"/>
          </Section>
          
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[0]">
               <Value field="code" value="GRS_ADDRESS"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[1]">
               <Value field="code" value="GRS_ELECTRONIC_ADDRESS"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[2]">
               <Value field="code" value="GRS_IDENTIFIER"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[3]">
               <Value field="code" value="GRS_ORGANIZATION_NAME"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[4]">
               <Value field="code" value="GRS_PERSONAL_NAME"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[5]">
               <Value field="code" value="GRS_REGISTRY_IDENTIFIER"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[6]">
               <Value field="code" value="GRS_TELEPHONE"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[7]">
               <Value field="code" value="PRS_CONDITION"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[8]">
               <Value field="code" value="PRS_CONFIDENTIALITY_INDICATOR"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[9]">
               <Value field="code" value="PRS_DEMOGRAPHIC_DETAIL"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[10]">
               <Value field="code" value="PRS_DISCIPLINARY_ACTION"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[11]">
               <Value field="code" value="PRS_INFORMATION_ROUTE"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[12]">
               <Value field="code" value="PRS_NOTE"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[13]">
               <Value field="code" value="PRS_PROVIDER_CREDENTIAL"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[14]">
               <Value field="code" value="PRS_PROVIDER_EXPERTISE"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[15]">
               <Value field="code" value="PRS_PROVIDER_RELATIONSHIP"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[16]">
               <Value field="code" value="PRS_STATUS"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[17]">
               <Value field="code" value="PRS_WORK_LOCATION"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[18]">
               <Value field="code" value="PRS_WORK_LOCATION_ADDRESS"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[19]">
               <Value field="code" value="PRS_WORK_LOCATION_DETAIL"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[20]">
               <Value field="code" value="PRS_WORK_LOCATION_ELECTRONIC_ADDRESS"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[21]">
               <Value field="code" value="PRS_WORK_LOCATION_INFORMATION_ROUTE"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[22]">
               <Value field="code" value="PRS_WORK_LOCATION_TELEPHONE"/>
          </Section>
          
          <Section path="ROLE_CLASS /ROLE_CLASS_VALUE">
               <Value field="value" value="LIC"/>
          </Section>
          <Section path="SORT_CONTROL[0]/SORT_CONTROL_ELEMENT_NAME">
               <Value field="code" value="PrincipalPerson.name.value.family"/>
          </Section>
          <Section path="SORT_CONTROL[0]/SORT_CONTROL_DIRECTION_CODE">
               <Value field="value" value="A"/>
          </Section>
     </Section>
</Enricher>
     </EnricherParameter>
          </EnricherParametersProfileData>
     </ProfileData>
</Profile>
the data is valid against the schema through XML Spy tool... and loaded into the XDB repository...
4) create table and insert data:
SQL> CREATE TABLE EHIP_PROFILE OF SYS.XMLTYPE
2 XMLSCHEMA "http://rac3-1-vip:8080/home/EHIPSBUSER1/xsd/EHIPProfile_v00.xsd" ELEMENT "Profile"
3 ;
Table created.
SQL>
SQL> alter table EHIP_PROFILE
2 add CONSTRAINT EHIP_PROF_PK PRIMARY KEY(XMLDATA."ProfileID"."ID",XMLDATA."ProfileID"."Type");
Table altered.
SQL>
SQL>
SQL>
SQL>
SQL> select xdbURIType('/home/'||USER||'/ProfileData/EnricherPP.ID.0001.xml').getClob() from dual;
XDBURITYPE('/HOME/'||USER||'/PROFILEDATA/ENRICHERPP.ID.0001.XML').GETCLOB()
<?xml version="1.0" encoding="UTF-8"?>
<!--Sample XML file generated by XMLSpy
SQL>
SQL>
SQL> insert into ehip_profile values(xmltype.createXML(xdbURIType('/home/'||USER||'/ProfileData/EnricherPP.ID.0001.xml').getClob()));
insert into ehip_profile values(xmltype.createXML(xdbURIType('/home/'||USER||'/ProfileData/EnricherPP.ID.0001.xml').getClob()))
ERROR at line 1:
ORA-21700: object does not exist or is marked for delete
what's the problem caused the "ORA-21700: object does not exist or is marked for delete" error?
Thanks in advance for your help?

Thanks Marco,
Here're my environment:
SQL> select INSTANCE_NUMBER, INSTANCE_NAME,HOST_NAME,VERSION from v$instance;
INSTANCE_NUMBER INSTANCE_NAME HOST_NAME VERSION
2 rac32 RAC3-2 10.2.0.3.0
I followed your suggested in the above, and always purge recyclebin, but still got the same problem. because in 10gr2, there's no dbms_xmlschema.purge_schema available,
and I did checked the recyclebin after force the delete of schema, nothing inside. any other recommendation?

Insert record in infotype 0581 using function module

Hello experts,
I am using function module HR_INFOTYPE_OPERATION to insert a record in infotype 0581, but its giving exception CX_HRPA_INVALID_INFOTYPE. This infotype is time constraint 1.So how can i handle this.
Reply will be really helpful <removed by moderator>.
Edited by: S Harshit on Feb 17, 2012 6:49 AM
Edited by: Thomas Zloch on Feb 17, 2012

Hi Mallikarjuna,
I am trying to pass the rent amount, but unable to, here is the code.
TYPES: BEGIN OF IT_P0581.
INCLUDE STRUCTURE P0581.
TYPES END OF IT_P0581.
DATA: INFTYKEY LIKE BAPIPAKEY,
RETURN LIKE BAPIRETURN1.
DATA: P0581_TAB TYPE TABLE OF IT_P0581 WITH HEADER LINE.
P0581_TAB-PERNR = 01400038.
P0581_TAB-INFTY = '0581'.
P0581_TAB-BEGDA = '20111010'.
P0581_TAB-ENDDA = '99991231'.
P0581_TAB-RTAMT = 3000 .
append P0581_TAB.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
INFTY = P0581_TAB-INFTY
NUMBER = P0581_TAB-PERNR
SUBTYPE = ''
VALIDITYEND = P0581_TAB-ENDDA
VALIDITYBEGIN = P0581_TAB-BEGDA
RECORD = P0581_TAB
OPERATION = 'INS'
NOCOMMIT = ''
RECORDNUMBER = '000'
DIALOG_MODE = '2'
IMPORTING
RETURN = RETURN
KEY = INFTYKEY
EXCEPTIONS
OTHERS = 0.

Relate to Inserting Record in the Table

Dear Expert ,
Records are getting inserted in a table to a perticular limit...then it stops inserting..
when i delete all the records from that table...then again it starts inserting the new records. Again stops after a perticular limit...
and goes on....
why is it so..?
this command is ok or not
ALTER TABLE CCT_RM_DETAIL_HRI
STORAGE (NEXT_EXTENT 50M, MAX_EXTENTS 200M,MIN_EXTENTS 1,INITIAL_EXTENT 100M, PCT_INCREASE 50M);

I am not getting any error. And you've checked the logs too? Nothing there too?
So what is occuring? Please understand, this is not normal behaviour for a database. Something somewhere is going wrong. But you need to explain to us in detail what you are doing, what you expect to happen and what actually happens. Because we cannot guess and we are not telepathic.
Cheers, APC

Technical Specifiaction for the ABAP HR Functional Spec

HI Please help me to write a technical spec for the below functional spec.
As-Is Business Process
Duplicate Performance, Development and Career Plans are being created. Forms have been created with incorrect validity dates. Some people that should have forms dont and some that should not have forms do. We have no easy way to periodically audit for these situations.
To Be Business Process
Audit report to be run via the SRET report tree to check for duplicate plans, incorrect validity dates, and actives that are missing forms as well as terms that have forms that are not in completed status.   Should be able to save selections as a variant.
Selection Screen
Use selection screen from YAUMI tcode as a base model. We only need the top bar, the selection section,, and a section for invalid data edits, which will be modified as shown below. Additionally, there should be a section to choose templates.
Template section:
      This section can be modeled after the selection screen in program Y_HRHAP_PDPGEN. Each template is selected via drop down, and the plan end year is entered. Drop down to choose template that shows form name. For development and career, the expected end year is 9999, which would be entered in the year for those 2 templates. For the Performance plan, the current year is the end year, and would be entered.
Invalid Data Edits section:
   Checkboxes for:
1)     duplicate plans
2)     invalid validity dates
3)     missing plans for active
4)     terms with non completed plans
Logic
     Include the templates selected above for associates with the chosen selections.
     If duplicate plans checkbox is selected
            If the plan year end on the screen is 9999, see if there is any associate that has more than one of this template in status not equal to Complete. If so, output to audit report.
            If the plan year end on the screen is less than 9999 (i.e. 2007), then see if there is any pernr that has more than one of this template in a status that is not equal to Complete with an validity end date of 12/31/yyyy (where yyyy is the year on the selection screen). If so, output to audit report.
     If invalid validity dates is selected
        If the plan year end on the screen is 9999, see if there is any pernr that has that template in status not equal to Complete with an end date not equal to 12/31/9999. If so, output to audit report.
            If the plan year end on the screen is less than 9999 (i.e. 2007), then see if there is any pernr with that template in status not equal to Complete with an end date = 12/31/9999, or with an end date with a month and day not equal to 12/31. If so, output to audit report.
     If missing plans for active is selected
     See if there are any people in the selected population that do NOT have any of the selected templates in a status not equal to Complete If so, output to audit report.
      If terms with active plans is selected
     See if there are any people in the selected population that DO have any of the selected templates in a status not equal to Complete If so, output to audit report.
Output
      Appraisee Pernr
      Appraisee Name
      Template name
      Validity Dates begin date and end date
      Status / Substatus
      Appraiser Pernr
      Appraiser Name
      Message :
          Duplicate plan
          Invalid Validity End Date
          Missing plan
          Plan not completed.
      For missing plan error, the fields for validity dates, status/substatus, appraiser pernr and appraiser name will be blank.
Thanks
Raja

Hi IB!
Please check the following links for docu:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/80/ea89395eb58c4f9d0c3e837cf0909d/frameset.htm
Check this for ESS:
/people/srinivasarao.gv2/blog/2005/06/11/configuring-ess-in-sap-enterprise-portal-60
I hope it was in time!
Have a nice day!
Best regards,
Zsolt

Inserting records in the ABAP exit function (hashed table XTH_DATA)

Similar Messages

Maybe you are looking for