Second Monitor Has Internet Problem

Hello Everyone,
This is my first post. Hope ya'll can help me. I have a T41 that I have recently connected to a large screen with projector with the idea that I can use the large monitor to watch "linked" video or other linked information from internet. I can get the internet to show on the large screen, but when I click on a link or "second level" the image reverts back to the laptop. Weird... Any suggestions? Thanks CatQueen

Are you connecting your external directly into the laptop itself, or are you using a docking station?
What projector are you using?
Also remember that you can use Presentation Director to assist you in setting your your display schemes: Here's the link:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-46022
We'll do what we can to help.
Best,
Mark
Do NOT PM me with technical issues. Post in the forum for assistance. Thanks

Similar Messages

Second monitor has a 50Hz refresh rate; my mac's lowest output is 60. What can I do?

I'm trying to get my 13" Late-2011 macbook pro to work with either of two second monitors so I can use logic more easily. One's a DELL thing with a screen res of 1280x1024 (though does work on some higher res') which I had working yesterday till I accidentally knocked the adaptor the slightest bit and now I can't make the second screen stay on for more than a few seconds whatever settings I try. Usually the monitor is on (ie not in power save mode) but just displaying nothing, and my mac behaves as if the second monitor is there.
The other one's a Toshiba 20WLT56B Tv with VGA input. The prob with this one is that it's refresh rate is 50Hz and the lowest option I have for my mac is 60Hz. Is there any way to allow me to output at 50Hz instead?
Cheers

if it's a message coming from your yahoo account, it means that your account has been compromised, not your phone itself. i would suggest changing the password for your email account

IMAC 27 - attached a second monitor - mouse tracking problem

After attaching a 19 inch lcd via the mini display port and a dvi adapter my mouse tracking has gone bad, not just from one screen to the other even just on the main screen if you move the mouse around it jumps several inches and is very inaccurate. problem goes away when the second mointor is unpluged.
Can anyone help?
Stephen

I'll add to the chorus: I have the 27" iMac, and I get the same mouse jumpiness when I connect my 24" Acer P244W display via the Mini DisplayPort-DVI adapter. Oddly enough, the mouse jumpiness is more pronounced when I use my old wired MS Intellimouse Optical than when I use the included Magic Mouse. I've confirmed with another Mac (and with this Mac minus the second display) that the wired mouse is functioning normally.
Basically, given slow, constant mouse movement, the cursor will hiccough for about a tenth of a second once every 1.0 seconds, like clockwork. Given more normal use, the cursor will continue to hiccough every second and will also occasionally jump to a completely unrelated location on the screen. (The wired mouse was the worse off here, jumping unpredictably several times a minute.)
I've unplugged the secondary display for now, but I kinda sorta really need it for Flash and video work. Apple, help!

Can't scroll-select on second monitor

When using Safari on my Macbook Pro on a second monitor, I can't select more text in a browser window than what shows on the screen. In other words, when I select and drag, the windows doesn't scroll.
Anyone else have that problem, and any resolution? Other applications, including Firefox, work in the second monitor without apparent problem.

Hmmmm. Looks like nobody has heard of this problem.

Mavericks Second monitor not detected after wakeup from sleep

Hi everybody,
seems like my problem is getting worse after updating to the latest Mavericks (10.9.5), but the general problem came up with upgrading to Mavericks.
I have two monitors connectet to my 3,1 MacPro with ATI Radeon HD 2600 XT 256 MB, which worked without any problems for years (since SnowLeopard).
After upgrading to Mavericks the Mac started loosing the connection to the second monitor after waking up from sleep.
At first only sporadically and then coming up more often. Some Google search showed that I wasn't alone with this problem. When I first started to find a solution for this, some of the workarounds others recommended seemed to help like resetting the PRAM, choosing another resolution with pressed alt button etc. but over time nothing really solved the problem. I only had a chance to get back my second monitor whenever the problem ocurred. Today none of these procedures seem to help, so I give it a shot with this post...maybe someone has a real solution for this (or at least can confirm exactly the same problem so that I can rule out some other reason than a buggy Mavericks?!?).
What I can rule out from trying different setups:
- It is not a problem of monitor brand (no NEC, both same model Xerox brand) nor size (both same resolution and 22")
- it is not a problem of connections and cables (switching the pluging switches the problem to the other monitor)
-> which brings me to the idea that the problem occurs with just one of the graphic cards ports. But since I have no other card available I'd like to rule out software problems before buying new hardware!
- The problem comes up only when waking up from sleep (immediately trying to reboot after the problem has ocurred brings no solution, the secon monitor stays undetected). Shutting down the Mac and booting up after a while (no specific time, but at least a couple of minutes) brings up both monitors perfectly.
- The monitrs try to get through to the Mac: when switching off the undetected monitor manually and switching it on again, it displays: No signal, going to sleep
Hope there is some help around here...this is really getting annoying!
Yours,
Ray

The weird thing is that every morning, when I move my mouse to wake the computer, both displays go from black to show the desktop but the second display immediately goes back to black. Unplugging it and plugging it back in eventually works after multiple trys. Restarting the computer sometimes works but not always.
The only other major change to my computer before this started happening is that I installed Leopard.
So far I've tried setting my Macbook Pro not to go to sleep but that didn't change anything.
Should I try setting my displays not to go to sleep either? I haven't tried that because Energy Saver warned me that it could reduce the lifespan of the display.

CS4 - Is there a way to adjust gamma for second monitor or send to overlay?

One thing that is evident when I edit in Premiere CS4 using the AVCHD 1080i 60 template is that the preview in the second monitor, which in my case is my TV set connected using a DVI to HDMI cable, is that the output is too dark compared to what it should be. Darker areas of the frame sometimes even get crushed into black when the same footage, when played directly from the camcorder, or even burned to blu-ray and played, is noticeably brighter and at the right black levels.
This doesn't happen when editing in Vegas Pro 8, or when the untouched footage is played through other video player, including Windows 7 Media Center.
A workaround for this problem can be to go to the graphics card control panel, in my case ATI Catalyst, and adjust the gamma for the second monitor, with the problem being that when you're done editing in Premiere you have to go back to the normal gamma. At one point I had setup two profiles in Catalyst with shortcuts and it worked well, but one day Catalyst simply lost the profiles and noticing how buggy it was I wasn't going to keep creating profiles so that Catalyst would delete them.
So my question is, since it's not in the preferences, is there some settings file or registry address that I can tweak to make Premiere display a brighter gamma of my choice?
And this may be a dead end, but is there a way to send the output of the second monitor to the overlay so that it can take advantage of the graphic's card video capabilities and display video smoothly? It's nice to have a preview of the timeline, but it's rather annoying if I have to go to the Catalyst control panel and adjust gamma before editing and after editing and that motion is jerky and not interlaced when I'm editing interlaced content.

You need the VESA mount option. That way your minimum angle would be completely vertical and you could open it to a negative 10 degrees.
Hope this helps.
Pete
I am not an HP employee, But I did stay at a Holiday Inn Express last night.
TouchSmart IQ526t CTO Intel 2.26 Ghz 4 gig ram 750 gig HDD Vista Premium 64 bit

Crazy crazy crazy! Airport loses internet when second monitor attached!

Can this really be happening? I decided to try using a second monitor attaching via a mini dvi -dvi converter. Several attempts to get it recognised by the iMac without any success. Scoured the internet groups to see that very many (and I mean very many) others had this problem.
Solved it by swapping my dvi-I lead for a dvi-D lead. The difference is that the DVI-I lead has fewer pins than the DVI-D lead and the iMac mini dvi socked supplies a DVI-D signal. Phew!
So--pleased with myself at surmounting this I fired up Final Cut Pro, dragged the canvas window to the second monitor and had to play around with the resolution setting to get a stable playing of the timeline.
Decided to go on online and see if I was alone on this.
NO INTERNET CONNECTION!!!
30 mins later decided to unplug the second monitor (Philips 200) and got back my inet connection.
Tried the routine again and sure enough each time the second monitor was connected I lost the Airport connection!
Is it possible that the proximity of the second monitor fouls the wireless signal?
Or what?

Kaybee31 wrote:
So far no one has either claimed the same problem or offered a possible explanation.
As I said this loss of internet connection when 2nd monitor is connected is unbelievably odd.
It sounds like another case of EMI (Electromagnetic interference). I believe this is at the root of all these weird Airport or wireless problems. Interestingly enough many of these anomalies are exhibited on the newer generation Macs. Different materials were used, shielding could have been compromised either for cost cutting or by design error. Regardless I'm sure Apple is aware, unfortunately those who purchased these machines may be in the worse case, left with hard wiring for reliable internet and or network connections.......sorry.....

Problems with my second monitor after upgrading to Mountain Lion

Basically I have a Mac Pro 8-core with two video boards (2 x NVIDIA GeForce GT 120 512 MB) connected to two monitors. After upgrading to the Lion Mountain, 90% of the time when I start my MAC the second monitor doesn't show it image, keeps in full black screen, what puzzle me is, I can see the mouse arrow on it, so its alive, but its in black, than I have to restart the computer over and over again until it finally make the second shows it contains.
Have anyone experienced the same problem?!

Hello Carlo!
Sorry but I don't understand which part of my question is not clear. I've been to the Apple Store, they asked me to bring my 20kg Mac Pro and both 24" inches Eizo monitors to central London to have it checked. Well, honestly, this is impossible, is an invitation for an accident.
Is just unbeliavable that no one has experienced my problem, looks like I am the only one person with two monitors using the Lion Mountain.

Red desktop on second monitor problem

Hi,im having a strange issue with a cinema hd display set up as a second monitor on an imac, its showing the desktop fine but its all red coloured.
If i connect a 17" hanns g monitor using the dvi its fine but if i connect an lg monitor that shows up red aswell although the lg works fine on a pc.
Has anyone else had or know of this problem, thanks.

If it's happening with two monitors, it doesn't sound like a compatibility problem. In fact, it sounds a lot like what happens when either pins are bent or else connections are made loosely.
Try checking the pins to make sure none are bent over in the cable being used. Also, when the cable is attached, make sure the thumb screws that hold it down are fully tightened.

Envy 15t-J100 Problem connecting second monitor

Hi!
So I have that problem that I want to know if someone ever had or have the answer for.
Each time I plug a second monitor using an HDMI cable, in order to get it to work I need to go to the device manager, disable and enable the Intel HD 4600 driver.
It's was OK when I used to connect the second monitor once in a while.. but now I use it on daily bases and each time it goes to sleep mode I need to do the disable/enable thing again.
Please let me know if you have any solution,
Thank you,
Ron.

@Berkomb ,
Hello and thank you for posting on the HP support forums. This issue may be due to a possible update from Microsoft. If an updated driver has been loaded that is not from the HP support site it may cause a change in functionality.
You may want to try a system restore back before you noticed the problem.
HP PCs - Using Microsoft System Restore (Windows 8)
Here is another link that may help you as well.
HP Notebook PCs - Troubleshooting HDMI Display and Sound Issues
Please let me know how things go.
Thanks again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Has anybody gotten this popup error message: ASI Eve CL Monitor has encountered a problem and needs to close

Has anybody received this error message: ASI Eve CL Monitor has encountered a problem and need to close?
== This happened ==
Every time Firefox opened
== Don't know

I don't think this is a Firefox problem. I have the same error message and I get it regardless of whether I'm using Firefox or another browser.
In checking [http://www.whatsrunning.net/QueryProductID.aspx?Product=16854] it is a file owned by Microsoft. I suggest you check your registry for errors.

I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area. I have stayed with 10G since the beginning. Most months I don't use the 10G. Verizon has no problem with me paying for Data I don't

I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area. I have stayed with 10G since the beginning. Most months I don't use the 10G. Verizon has no problem with me paying for Data I don't use. This month my daughter comes home from College and she accidentally uses 24G.....14 over get blind sided with $140.00 in overages. I called Verizon today......stopped in to the store today......My neighbor told me they waved charges for her one time. Lots of charges.....But I'm am getting no help. Not even an offer of a payment plan to help me out. I went back just 6 months and I have over paid for 19G.....Seems like they would like to help out their loyal customers!!!! Does anybody have any suggestions on how to deal with them? We are not wealthy....or I would just pay this and walk away......

There is a big misconception in what customers believe a cell carrier is obligated to do.
You pay a set price to use up to that amount of xx data. It makes no difference if you use it to the paid limit or way under. Its like peace of mind when you don't have to worry about a data counter.
Your daughter used the data, your plan is quite clear of what overage charges are. Why should or would Verizon wireless just forgive the charges because you are a customer? Your daughter used the data, get the money from her. That is the responsible thing to do.
There is no "I have been a loyal customer so please remove the $120, or $250, or $2,000.00 since I did not mean to use it"
Your electric company, or gas company or any other company does not remove valid charges. Why should Verizon wireless?
Just pay the invoice and don't think you are being mistreated because Verizon is a business and not a charity.
Good Luck

Is anyone else experiencing problems with the thunderbolt port on their Mac Mini's regarding using it to connect a second monitor? I've got the Mini Display Port to DVI-D adapter along with a DVI-D cable and I can't get an image on the second monitor.

I had an dual display image / setup working twice for a few seconds, but then it cut out. I think there may be a problem with the thunderbolt port.

As far as I can tell you have only listed that you have a DVI monitor connected to the Mini Displayport socket (i.e. the Thunderbolt socket) via presumably the Apple Mini Displayport to DVI adapter and a DVI to DVI cable.
You don't appear to have listed what the second monitor is and how it is connected (even though not working). As such I cannot tell what may be wrong.

How do I Add second monitor to ALL in One ENVY23 that has a HDMI port

How do I Add second monitor to my ALL in One ENVY23 that has a HDMI port the computer has Win 8 Model #: 23se-d494
Product #: F3D93AA#ABA
Serial #: [edited Serial Number by Moderator]
Software Build #: 14AM1HRA601#SABA#DABA
Service ID #: 20140521
PCBRAND #: HP

Here are the specs for your HP ENVY TouchSmart 23se-d494 All-in-One Desktop Computer. Based the specs, the HDMI port on the side of your computer is an INPUT only. This model doesn't have a video output of any kind.
1 - Controls 2 - HDMI In port (model dependent)
You will need to purchase and use a USB-to-video adapter such as the EVGA UV Plus+ UV39 (or any of the many other adapters on the market) to connect an external display to your computer. I personally use and recommend the EVGA UV Plus+ UV39.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

I have a problem when i am connecting my mbpr to a monitor , the internet is going very slow when i connect to the monitor plz help me if i buy a vga to minidisplay it will help??

i have a problem when i am connecting my mbpr to a monitor , the internet is going very slow when i connect to the monitor plz help me if i buy a vga to minidisplay it will help??

dovdov2,
are you saying that when you connect your MacBook Pro to a monitor, your Internet connection slows down, but when you disconnect the monitor, it speeds up again, and that this is reproducible from one day to another?
Does this happen both under OS X and under Windows 7, or only under one of them?
How are you currently connecting your MacBook Pro to your monitor?

Second Monitor Has Internet Problem

Similar Messages

Maybe you are looking for