Secure zone doesn't appear in site manager

secure zone does'nt appear in site manager.
i'm using adobe muse, dreamwaver.

Hi,
Most likely you are under site plan webBasic or webBasic+ which does not include Secure Zone features. 
For a breakdown of features per plan please view here. -> http://helpx.adobe.com/business-catalyst/kb/detailed-plan-breakdown.html
For information on how to upgrade your Muse site you may want to visit this thread below.
- http://forums.adobe.com/message/4827272#4827272
Hope this helps!
-Sidney

Similar Messages

  • Acrobat doesn't appear in App Manager

    I can't get Acrobat Pro XI to appear in App Manager.  I have tried the online download several times.  Any suggestions?

    Sad to say, Vista isn't a supported system for Acrobat XI.

  • Portal doesn't appear in Portal Management Home

    Hi,
    For WebLogic Portal 7.0, I followed the tutorial instructions on how to create
    a new portal (in a new domain). I get as far as adding a portlet. When I try
    to use the portal admin tool to make the portlet visible, and navigate to the
    Portal Management home page, the portal is not visible (nothing is). No errors
    are reported on the console. According to the WebLogic console, the portal app
    is deployed ok, and the portal and portlet appear in the data repository.
    Any ideas gratefully received.
    SB

    &**@&*$@ - Thanks.
    SB
    "Reid" <[email protected]> wrote:
    >
    Make sure you've logged into the admin console as "administrator".
    "Stanley Beamish" <[email protected]> wrote:
    Hi,
    For WebLogic Portal 7.0, I followed the tutorial instructions on how
    to create
    a new portal (in a new domain). I get as far as adding a portlet. When
    I try
    to use the portal admin tool to make the portlet visible, and navigate
    to the
    Portal Management home page, the portal is not visible (nothing is).
    No errors
    are reported on the console. According to the WebLogic console, the
    portal app
    is deployed ok, and the portal and portlet appear in the data repository.
    Any ideas gratefully received.
    SB

  • Solution landscape doesn't appear in Solution Manager Diagnostics

    Dear all,
    I have configured 6 Solution Landscapes in transaction solution_manager. One for ECC5, one for PI 7.0, one for BI 7.0, one for Solution Manager 7.0, one for SRM 4.0 and finally one for NW 04 Portal.
    When I go to my Solution Manager Diagnostics URL
    https://solman.domain.com:50001/smd and I do Diagnostics Setup --> Managed Systems --> Setup Wizard,  I see there all the Solution Landscapes I have configured except for the NW 04 Portal one. Any ideas why I can not see this landscape? I am trying to think if I have missed any configuration but I can not think of something
    Many thanks
    Andreas

    Sad to say, Vista isn't a supported system for Acrobat XI.

  • Acrobat doesn't appear in Application Manager

    Why am I not getting Acrobat XI in Application Manager? Everything else is there, and I know my computer meets the minimum specs for Acrobat.

    Which operating system version are you running?
    Acrobat XI is not supported on Windows Vista.

  • Feature not appearing in site collection features list using powershell

    I created a custom web part solution which adds a custom web part to the web part gallery - simple.
    I did this on my dev server and used Visual Studio's deploy button to deploy it, and it all worked. The solution was added to the Solution Store, my feature was now in the Site Collection features list and automatically activated. So I checked my web part
    gallery and it was there as well... great.
    Now I'm ready to migrate my simple web part to my Prod server. I managed to use WSP builder to build my wsp. So now i have my wsp file.
    I used Powershell to add my solution to my Prod server, that worked. So I ran the Install-SPSolution command and looking at the logs, it all seemed to install fine. Here are the commands I used: 
    Add-SPSolution “E:\Deployment WSPs\HRFeedbackForm.wsp“
    Install-SPSolution -Identity "HRFeedbackForm.wsp" -GACDeployment
    However, when I go to my Site Collection Features, I can't see my feature. There is nothing in my 14 hive either and as far as I can see, and there are no errors in my log files.
    So what have I done wrong?
    So I tested adding and deploying the same solution on my dev box using Powershell and I had the same problem as what I've experienced on my Prod server. So what's the difference between deploying solutions via Visual Studio Deploy and using those powershell
    commands??? Is there something else I'm meant to change, somewhere?
    I hope someone can shed some light on this issue.
    Danielle :)

    Hi,
    I wonder whether you have to populate this web part by force in your web part gallery.
    For this, go to your Site's Home page. Then...
    Site Action > Site Settings > Galleries > Web Parts
    From here...
    Under Library Tools go to Documents Tab > Click on New Documents > The New Web Parts popup will open
    Here search for your web part. If you find it, select it and Check "Overwrite if file already exisists" and click on Populate Gallery.
    If the above does not work, I am stumped too. I will be curious what other members of the community have to add.
    Thanks, Soumya | MCITP, SharePoint 2010
    Omg it was there and i've added it to the web parts library and it works.... that was soooo strange.
    Thanks Soumya :)
    Can you explain at all why the web part has been added to the web part gallery, but the feature doesn't appear under site collection features?
    Danielle :)

  • Multiple Secure Zones with a Single Login Form

    Hello, I've created a login form and 20 different secure zones. I am needing to redirect users to their own personal secure zone automatically once they login (without the need for them to choose the secure zone) Can you please let me know how this can be done? Thank you much

    Hi
    The main difference is :
    Using generic secure zone login option : When customer logs in , he stays on the same page. I mean , Generic secure zone in BC doesn't support redirect to other pages . However, he will have access to all the pages that were in other secure zones to which he actually subscribed to.
    Using Specific secure zone login form, you have option to redirect the user to specific landing page and user will have access to data that is placed in this specific secure zone.
    You may locate the Generic secure zone login form in toolbox > site modules > secure zones > sign in form >  as shown in below screenshot :

  • Secure Zone Login Issues:  It worked great and now just stopped.

    The secure zone on my client's site worked great for about a month and now it just stopped.  All of a sudden it won't let us type into the username and password boxes.  We can click on the "remember me" button and the "submit button" but not type.  I've tried deleting and redoing the code and still nothing.  Our issue is occuring most when used with Chrome's browser.  Any thoughts or suggestions?

    Thanks for your reply, Liam.  Oddly enough I was just reading your expectional contributor profile that popped up in my side collumn.
    Here is the link to the site.  The login works fine in Safari, it's just a problem with Chrome I believe.
    www.myadvancedpt.com
    The login area is in the bottom right of the footer titled "Employee Login."

  • Ending a recurrent secure zone subscription

    Hello,
    We are selling subscription to a secure zone. Is there any way for the subscriber to end the subscription on the front-end? I've been looking over the modules and could not find anything like that. If that is not possible, will just un-subscribing the client from the secure zone end the recurrent payments?

    Hi Maria,
    Unfortunately there's no front-end option. 
    The steps for cancelling membership can be found below.
    Cancelling memberships
    If a subscriber decides to cancel their membership, the workflow is as follows:
    The suscriber will contact you via the contact form on your site (or via a phone call, if you've provided your number online).
    Note: If desired, you can create and publish a Secure Zone cancellation form on your site for this specific purpose.
    After receiving notification, choose Customers > Customers to access their record, as described in the previous section. Click the Recurrence/Direct Debit link to see the Order Details page, as shown in the screenshot above.
    Use the Recurring Status menu to change the setting from Enabled to Disabled.
    Next, follow the steps provided in the next section to manually unsubscribe the customer from Secure Zone.
    KB reference: http://kb.worldsecuresystems.com/kb/setup-recurring-billing-secure-zone.html
    Hope this helps!
    -Sidney

  • I can't find the Secure Zone in my Site-Manager.

    I'm a creative cloud member and I can't find the Secure Zone in my Site-Manager. There are only Web-Formulars and System-E-Mails. What do I have to do?

    Hi there, the creative cloud site you get is only a web basic plan. You do not have those features, you will need to upgrade if you want them.

  • Why can't I add a secure zone to my web site in the admin panel?

    I would like to add a secure zone (or add files to the site) to one of my web sites but I don't have that option in this account. What is the problem here and how to I fix this? In my main account I have the more options under the "Site Manager" tab. However, under this account I only have two options, Web Forms and System emails. Need help ASAP.

    Hi Mr. Baker,
    The option of secure zone depends on your site plan. However, I'd suggest you to please login to your site, hover mouse on your name at the top and go to My Details. Scroll down and make sure "Enable online editing" is checked. If its checked already and still not getting the secure zone option, please provide us the site URL and we'll investigate the issue.
    Regards,
    Aish

  • HT201303 I forgot my security questions and the option of sending an email to reset the questions to my rescue email doesn't  appear . What can I do to retrieve thes question because I can buy in app even I have credit in my account ?????

    I forgot my security questions and the option of sending an email to reset the questions to my rescue email doesn't  appear . What can I do to retrieve thes question because I can't buy any app even I have credit in my account ?????

    Alternatives for Help Resetting Security Questions and Rescue Mail
         1. Apple ID- All about Apple ID security questions.
         2. Rescue email address and how to reset Apple ID security questions
         3. Apple ID- Contacting Apple for help with Apple ID account security.
         4. Fill out and submit this form. Select the topic, Account Security.
         5.  Call Apple Customer Service: Contacting Apple for support in your
              country and ask to speak to Account Security.
    How to Manage your Apple ID: Manage My Apple ID

  • Non Functional Wireless Adapter: Visible and Functional According to Device Manager Doesn't Appear in IPConfig

    Hi all,
    This one has me completely lost. The user normally connects via a USB wireless adapter, which stopped working a few days ago apparently of its own accord. The device is detected and reported as working by both Device Manager, and the Network Connections
    menu, however it doesn't appear at all in ipconfig- Not even to say that it isn't connected to anything. When I try to connect to a network, it reports no connections available as if it was out of range. However, I'm sitting right under a known working access
    point.
    The device is enabled in devmgmt, there is no physical switch to disable it, and the adapter itself is tested as working both on different hardware running Windows 7 and 8, and the same hardware running Slax Linux. Wired connectivity to the affected machine
    appears to be fully functional, which leads me to discount the TCP/IP stack.
    I've tried the default PnP driver, the driver that came with the device on a mini-CD, and the latest driver from the manufacturer. I've also tried a completely separate USB wireless adapter, made by a different manufacturer, which proved to have the same
    problem with identical symptoms.
    I've been through power settings, it is set to Maximum Performance as per the default. I've checked the WLAN autoconfig service, which is running and starting automatically as it always has. I've even checked registry settings suggested elsewhere on technet,
    and those are fine. System restore produced no results. Virus scan came back clean.
    The only two things that seem unusual are A) the fact that the adapter doesn't appear at all in ipconfig, and that Cisco AnyConnect VPN client begins complaining in the event viewer, error description "ROUTTABLE_ERROR_GETBESTROUTE_FAILED" - Presumably
    due to the sudden lack of usable interfaces
    With all this, I'm out of ideas. Thanks for reading, and any suggestions (even insane ones) would be much appreciated.

    Hi Blexie,
    According to your update, I think you have fixed it by yourself.
    I am glad to hear the issue is resolved .
    Thank you for share the solution.
    If you have any concerns, please do not hesitate to let us know. Thanks again, and have a great day!
    Regards,
    Blair Deng
    Blair Deng
    TechNet Community Support

  • I just updated to Firefox 4 and my Roboform toolbar disappeared. Following the instructions on your site and Roboform's site did not help. It doesn't appear in the Customize Toolbar window nor in the Extensions list. How can I get it back?

    I followed the instructions on your site and Roboform's site, but Roboform doesn't appear in the Customize Toolbar window nor does it appear in the Extensions list. How can I get the Roboform Toolbar back?

    Here's an interesting bit: iTunes will let me restore my iPod touch from backup: it's still running iOS 4.3.3. I figured as much... there's backups showing in the Preferences -> Devices list for both devices (and even my old, long gone iPod touch 2G), but my iPhone (on iOS5) isn't giving me any such option. I remember I had to downgrade before to get the backup restored (something went haywire in the setup assistant, and I couldn't restore a backup from iTunes there)... If it was possible to go to iOS 5.0 rather than 5.0.1 I would just do the same thing again, but iOS 5.0.1 isn't an option. I attached a screenshot. Hopefully Apple can get this nonsense sorted out; I think iOS 5 might be the root of this, somehow.

  • Setting Security in Internet Zone to High affects Trusted Sites

    In response to the recent Security Advisory, we recommended our users set the Internet Zone security to High.
    However, this is causing our local Intranet site which is in every users Trusted Sites Zone (set at Medium-Low) to not function.
    I was under the impression that Trusted Sites are treated different than Internet Sites.
    What security settings do they share that would be affected by setting the Internet Zone to High?
    Thank you.
    Jeremy Leigh

    Hi
    f12>Console tab, refresh the page to show suppressed error messages, warnings, blocked content warnings.
    A 'High' security zone settings is equivalent to the Restricted Zones default setting.
    by default Active Scripting, scripting of ActiveX and applets and xss is disabled in the Restricted Zone.... basically domains mapped to the Restricted sites zone will be useless without active scripting.
    Rob^_^

Maybe you are looking for