Seeing twice in B2B consoles

Hi All,
I am using Custom document using generic protocol
My process is , Inbound to B2B, placing the files in ftp folder and B2B will picks up and it will send it to Fusion....
my question is: I placed a file once in ftp folder but it showing twice in B2B console.
I cross checked both the payloads , both are same , but time format is difference of 4 seconds.
I cross checked if i added any resubmission logic, but i m not.
Please help me to resolve this.

Hi CNU,
1Is this a HA configuration with multiple instances of B2B accessing the common File/FTP folder?HA - High Availability, is the concept of running multiple instances of same server. To know more, please refer -
http://www.b2bgurus.com/2008/02/high-availability-with-fileftp-adapter.html
2. What is the value of minimumAge parameter in the Host DC configuration?There is a setting in FILE/FTP transport, receiver file minimum age(in ms) - Time before which b2b will not pickup the file from the target directory. B2B has capability of timestamp based reading, means it would not process the incoming file until the specified time in configuration. It would prevent B2B to read the half written files. By default, it's value is zero.
Regards,
Anuj

Similar Messages

Unable to open b2b console after SOA 11.1.1.6 installation

Hi Gurus,
I had installed oracle SOA 11.1.1.6.0 successfully but i am unable to open b2b console after the installation.
Now
1)With Oracle installation can i able to open b2b console?
2)If not,Should i install oracle b2b soft also?
if yes,I can see the soft in 3 CDs (CD 1 of 1 ,CD 1 of 2 and CD 1 of 3)is it sufficient to install CD 1 of 1 so that others will also get install)
after the installation can i able to open b2b console?
please clarify?
Regards
Ramesh

Hi Anju,
Thanks for the help.
Can you send me some blog to guide me step by step to build Oracle b2b SOA application.
Please clarify:Do i need to install B2B document editor soft(CD 1of 1,CD 1 of 2,CD 1 of 3) or Installation of CD 1 of 1 is sufficient for b2b document editor.
Is B2B server is different from SOA server?If at all i need to deploy some doc in server,Can i deploy in SOA server using document editor?
Can i have some clarity on 1.How to install b2b doc in server?
Can i have a step by step sample to run a simple b2b application?
Regards
Ramesh

Error in B2B Console

Hi gurus,
I am gettig the following error in b2b console while running one of our outbound agreements.This is a strange error and i am seeing it for the first time.
StackTrace:
Error -: AIP-50014: General Error: Error -: AIP-13118: Business Logic Internal Error: java.sql.SQLException: ORA-28232: invalid input length for obfuscation toolkit
ORA-06512: at "SYS.DBMS_OBFUSCATION_TOOLKIT_FFI", line 84
ORA-06512: at "SYS.DBMS_OBFUSCATION_TOOLKIT", line 233
ORA-06512: at line 1
     at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1194)
     at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:836)
     at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:402)
     at java.lang.Thread.run(Thread.java:534)
Caused by: Error -: AIP-13118: Business Logic Internal Error: java.sql.SQLException: ORA-28232: invalid input length for obfuscation toolkit
ORA-06512: at "SYS.DBMS_OBFUSCATION_TOOLKIT_FFI", line 84
ORA-06512: at "SYS.DBMS_OBFUSCATION_TOOLKIT", line 233
ORA-06512: at line 1
     at oracle.tip.common.security.Secret.decode(Secret.java:134)
     at oracle.tip.adapter.b2b.tpa.RepoDataAccessor.addTransportInfo(RepoDataAccessor.java:994)
     at oracle.tip.adapter.b2b.tpa.RepoDataAccessor.addFROMPartyInfo(RepoDataAccessor.java:838)
     at oracle.tip.adapter.b2b.tpa.RepoDataAccessor.getAgreementDetails(RepoDataAccessor.java:412)
     at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:742)
     at oracle.tip.adapter.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:223)
     at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1107)
     ... 3 more
Caused by: java.sql.SQLException: ORA-28232: invalid input length for obfuscation toolkit
ORA-06512: at "SYS.DBMS_OBFUSCATION_TOOLKIT_FFI", line 84
ORA-06512: at "SYS.DBMS_OBFUSCATION_TOOLKIT", line 233
ORA-06512: at line 1
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:315)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:281)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:638)
     at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:183)
     at oracle.jdbc.driver.T4CCallableStatement.execute_for_rows(T4CCallableStatement.java:872)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1160)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3000)
     at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3092)
     at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4285)
     at oracle.tip.common.security.Service.decode(Service.java:119)
     at oracle.tip.common.security.Secret.decode(Secret.java:130)
     ... 9 more
Any ideas?
Oracle B2B Version- 10.1.2.3
Regards
Ayush

Thanks Anuj. This happened in one of our Test Instances, after purging the repo and reimporting the agreements its working fine. If it comes up again or if i see it in Prod instance i will open an SR with Oracle.
Thanks
Ayush

New Apps Tab in document definition page of B2B Console

Hi All,
I am trying to figure out a way to convert all EDI formats into a single Canonical XSD format before sending it to SOA layer. This is to avoid different SOA services for each EDI format.
Could you please let me know something about the Apps tab in document definition page of B2B Console. I am seeing an XSLT File field there. What can we use here?
Regards,
Raghav

If I upload standard 850 ecs file in B2B, can B2B read all custom 850 files, transalte based on standard ecs and send it to SOA layer in a single XSD(850) format?It will be supported in future release. As of now, you have two options -
1. Handle it at SOA by using XSLT transformations. Recommended.
2. You may create a generic 850 ecs which can handle all custom 850 transactions at your end though this will have some limitations and I do not recommend it personally.
And regarding Apps tab, can i create an XSLT file to convert EDI format to canonical format in B2B itself?No. B2B does not execute any XSLT to transform the messages.
Regards,
Anuj

MDS-01401: Fails in updating configuration using B2B console

Hello B2B experts,
I am getting the following error applying any changes to the TP using B2B console. I checked the log and it doesn't give me more information than the following one. I restarted both weblogic and soa severs, and still it is throwing the same error.
MDS-01401: Updating a node in one document "/soa/b2b/tp_MyCompany.xml" using a node from a different document "/soa/b2b/tp_MyCompany.xml.bak" is not allowed.
ADF_FACES-60097: For more information, please see the server's error log for an entry beginning with: ADF_FACES-60096: Server Exception during PPR, #39
Any ideas on this one?
Thanks in advance!

Thanks Anuj for quick response.
There was a problem with one of the file, tp_MyCompany.xml has been backed up by one of our developer as tp_MyCompany.xml.bak and he included that in the exported TP file. When we did an import of that file, the .bak file took precedence over the .xml file. Rather, B2B was trying to update both the files I believe and it was throwing out the expcetion. I deleted the .bak file and reimported it again and everything is now working as expected.
Regards!
Edited by: user021211 on Jul 19, 2011 8:23 AM

Custom File Name Format in B2B Console

Hi,
Please let me know if we can have a customized File Name Format in the B2B Console for the X12 EDI/XML Files.
I have read the Oracle doc and only the following formats are mentioned:
%FROM_PARTY%
%TO_PARTY%
%DOCTYPE_NAME%
%DOCTYPE_REVISION%
%MSG_ID%
%TIMESTAMP%
Is there a way to have a PO# (From the Trading Partner Payload) in the filename format?
You help is appreciated.
Thanks
Priyanka G

no. It has the format which helps B2B in identifying the agreement

Getting error while trying to open the b2b console

Hi All,
I have installed weblogic server 10..3.1.0 and SOA 11.1.1.1.0. After installation I started the admin server and managed servers. While trying to open b2b console after login I am getting the following error message
access denied (oracle.security.jps.service.policystore.PolicyStoreAccessPermission context=APPLICATION,name=b2bui getApplicationPolicy)
Can anyone suggest whst could be the issue with this.

hi,
Suppose if you are installing linux system...
Once try to change the permissions to your specfied user!
try this way may be your problem is solved!
Regards,
Bala satish Kamma
Edited by: 932483 on Jun 11, 2012 7:02 PM

Error while opening b2b console

Hi,
i am facing issue with B2b console in SOA.
I have a clustered environment and when ever i am trying to access the b2b console, i am getting below error in SOA logs and console is not opening:-
<HTTP> <INFVA05189> <WLS_SOA1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1336125613440> <BEA-101020> <[ServletContext@61492488[app:b2bui module:/b2bconsole path:/b2bconsole spec-version:2.5]] Servlet failed with Exception
java.lang.IllegalStateException: Response already committed
at weblogic.servlet.internal.ServletResponseImpl.objectIfCommitted(ServletResponseImpl.java:1608)
at weblogic.servlet.internal.ServletResponseImpl.sendRedirect(ServletResponseImpl.java:834)
at oracle.tip.b2b.ui.util.SessionTimeoutFilter.doFilter(SessionTimeoutFilter.java:213)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Please help me out and let me know if any other information needed from my end.

You are trying to login with a user which does not have any B2B role assigned to it. Either login through a user which has b2badmin role assigned to it or get an appropriate B2B role assigned to the user by your B2B admin
Regards,
Anuj

Error Defining Document Definition 4010_810 in B2B console

Hello B2B Gurus,
I have a small request to you all... I am trying to work on some B2B samples, I have created a Document definition for some reason i was having some issues with my SOA domain so i have created a new domain and i have purged the exisiting definitions in B2B console... When i tried to create the same document defininiton i am getting the below error. Can some one please let me know what is that i am missing.
extImpl addPartialTriggerListeners
WARNING: Could not find partial trigger timeRange from UIGraph[UIXFacesBeanImpl,
id=graph2] with the supported partialTriggers syntax. The partial trigger was f
ound with the deprecated syntax. Please use the supported syntax.
Dec 13, 2010 11:45:34 AM oracle.adfinternal.view.faces.renderkit.rich.SimpleSele
ctOneRenderer _getSelectedIndex
WARNING: Could not find selected item matching value "" in RichSelectOneChoice[U
IXEditableFacesBeanImpl, id=value20]
Dec 13, 2010 11:45:34 AM oracle.adfinternal.view.faces.renderkit.rich.SimpleSele
ctOneRenderer _getSelectedIndex
WARNING: Could not find selected item matching value "" in RichSelectOneChoice[U
IXEditableFacesBeanImpl, id=value30]
Dec 13, 2010 11:45:34 AM oracle.adfinternal.view.faces.renderkit.rich.SimpleSele
ctOneRenderer _getSelectedIndex
WARNING: Could not find selected item matching value "" in RichSelectOneChoice[U
IXEditableFacesBeanImpl, id=value40]
Dec 13, 2010 11:45:35 AM oracle.adfinternal.view.faces.renderkit.rich.SimpleSele
ctOneRenderer _getSelectedIndex
WARNING: Could not find selected item matching value "" in RichSelectOneChoice[U
IXEditableFacesBeanImpl, id=value20]
Dec 13, 2010 11:45:35 AM oracle.adfinternal.view.faces.renderkit.rich.SimpleSele
ctOneRenderer _getSelectedIndex
WARNING: Could not find selected item matching value "" in RichSelectOneChoice[U
IXEditableFacesBeanImpl, id=value30]
Dec 13, 2010 11:45:35 AM oracle.adfinternal.view.faces.renderkit.rich.SimpleSele
ctOneRenderer _getSelectedIndex
WARNING: Could not find selected item matching value "" in RichSelectOneChoice[U
IXEditableFacesBeanImpl, id=value40]
Querying docs for tp_MyCompany
EDI_X124010810null
In checkIfPackageExists /soa/b2b/EDI_X12/4010/ ### 810
In deleteFolder /soa/b2b/EDI_X12/4010/810
EDI_X124010997null
In checkIfPackageExists /soa/b2b/EDI_X12/4010/ ### 997
In deleteFolder /soa/b2b/EDI_X12/4010/997
BEan Util $$$ C:\OFM\Middleware1\user_projects\domains\LOCALSOADOMAIN\servers\so
a_server1\tmp\_WL_user\b2bui\bklbbb\public
Dec 13, 2010 11:46:33 AM org.apache.myfaces.trinidadinternal.config.upload.Uploa
dRequestWrapper setCharacterEncoding
WARNING: Unable to set request character encoding to UTF-8, because request para
meters have already been read.
Dec 13, 2010 11:46:33 AM org.apache.myfaces.trinidadinternal.config.upload.Uploa
dRequestWrapper setCharacterEncoding
WARNING: Unable to set request character encoding to UTF-8, because request para
meters have already been read.
BEan Util $$$ C:\OFM\Middleware1\user_projects\domains\LOCALSOADOMAIN\servers\so
a_server1\tmp\_WL_user\b2bui\bklbbb\public
BEan Util $$$ C:\OFM\Middleware1\user_projects\domains\LOCALSOADOMAIN\servers\so
a_server1\tmp\_WL_user\b2bui\bklbbb\public
FileManager.saveFileInMidTier : Size of file{ C:\OFM\Middleware1\user_projects\d
omains\LOCALSOADOMAIN\servers\soa_server1\tmp\_WL_user\b2bui\bklbbb\public/810.x
sd} is :783509
Dec 13, 2010 11:46:52 AM org.apache.myfaces.trinidadinternal.config.upload.Uploa
dRequestWrapper setCharacterEncoding
WARNING: Unable to set request character encoding to UTF-8, because request para
meters have already been read.
Dec 13, 2010 11:46:52 AM org.apache.myfaces.trinidadinternal.config.upload.Uploa
dRequestWrapper setCharacterEncoding
WARNING: Unable to set request character encoding to UTF-8, because request para
meters have already been read.
BEan Util $$$ C:\OFM\Middleware1\user_projects\domains\LOCALSOADOMAIN\servers\so
a_server1\tmp\_WL_user\b2bui\bklbbb\public
BEan Util $$$ C:\OFM\Middleware1\user_projects\domains\LOCALSOADOMAIN\servers\so
a_server1\tmp\_WL_user\b2bui\bklbbb\public
*FileManager.saveFileInMidTier : Size of file{ C:\OFM\Middleware1\user_projects\d*
omains\LOCALSOADOMAIN\servers\soa_server1\tmp\_WL_user\b2bui\bklbbb\public/810.e
cs} is :1242392
BEan Util $$$ C:\OFM\Middleware1\user_projects\domains\LOCALSOADOMAIN\servers\so
a_server1\tmp\_WL_user\b2bui\bklbbb\public
*## PArameter Name TransactionECSFileBlob &&& /soa/b2b/EDI_X12/4010/810/810def/81*
*0.ecsmds val null*
Dec 13, 2010 11:46:52 AM oracle.tip.b2b.ui.util.BeanUtil log
WARNING:
EXCEPTION:
MESSAGE:Index: 0, Size: 0
STACK TRACE:
java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
at java.util.ArrayList.RangeCheck(ArrayList.java:547)
at java.util.ArrayList.get(ArrayList.java:322)
at oracle.mds.internal.cache.CacheKeyUtil.getRootCacheKeyAndHint(CacheKe
yUtil.java:413)
at oracle.mds.internal.cache.CacheKeyUtil.getRootCacheKeyAndHint(CacheKe
yUtil.java:348)
at oracle.mds.core.UpdateableSOContent.getCacheKey(UpdateableSOContent.j
ava:928)
at oracle.mds.core.UpdateableSOContent.cacheData(UpdateableSOContent.jav
a:869)
at oracle.mds.core.UpdateableSOContent.clearClientObjects(UpdateableSOCo
ntent.java:163)
at oracle.mds.core.MDSTransaction.flushChangesToPTrans(MDSTransaction.ja
va:638)
at oracle.mds.core.MDSTransaction.internalCommit(MDSTransaction.java:237
*2)*
at oracle.mds.core.MDSSession.flushChanges(MDSSession.java:981)
at oracle.tip.b2b.ui.util.FileManager.saveFileInMds(FileManager.java:450
at oracle.tip.b2b.ui.data.document.GuiDefinition.createDefTypeObj(GuiDef
inition.java:328)
at oracle.tip.b2b.ui.data.document.GuiDefinition.save(GuiDefinition.java
*:538)*
at oracle.tip.b2b.ui.backing.admin.AdminDocument.saveThreadAction(AdminD
ocument.java:1666)
at oracle.tip.b2b.ui.business.admin.FileUploadThread.run(FileUploadThrea
d.java:61)
java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
at java.util.ArrayList.RangeCheck(ArrayList.java:547)
at java.util.ArrayList.get(ArrayList.java:322)
at oracle.mds.internal.cache.CacheKeyUtil.getRootCacheKeyAndHint(CacheKe
yUtil.java:413)
at oracle.mds.internal.cache.CacheKeyUtil.getRootCacheKeyAndHint(CacheKe
yUtil.java:348)
at oracle.mds.core.UpdateableSOContent.getCacheKey(UpdateableSOContent.j
ava:928)
at oracle.mds.core.UpdateableSOContent.cacheData(UpdateableSOContent.jav
a:869)
at oracle.mds.core.UpdateableSOContent.clearClientObjects(UpdateableSOCo
ntent.java:163)
at oracle.mds.core.MDSTransaction.flushChangesToPTrans(MDSTransaction.ja
va:638)
at oracle.mds.core.MDSTransaction.internalCommit(MDSTransaction.java:237
*2)*
at oracle.mds.core.MDSSession.flushChanges(MDSSession.java:981)
at oracle.tip.b2b.ui.util.FileManager.saveFileInMds(FileManager.java:450
at oracle.tip.b2b.ui.data.document.GuiDefinition.createDefTypeObj(GuiDef
inition.java:328)
at oracle.tip.b2b.ui.data.document.GuiDefinition.save(GuiDefinition.java
*:538)*
at oracle.tip.b2b.ui.backing.admin.AdminDocument.saveThreadAction(AdminD
ocument.java:1666)
at oracle.tip.b2b.ui.business.admin.FileUploadThread.run(FileUploadThrea
d.java:61)
Additional Log from the Admin Server
*###<Dec 13, 2010 1:19:25 PM EST> <Warning> <org.apache.myfaces.trinidadinternal.config.upload.UploadRequestWrapper> <mia-dt-6111> <soa_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1292264365367> <BEA-000000> <Unable to set request character encoding to UTF-8, because request parameters have already been read.>*
*####<Dec 13, 2010 1:19:25 PM EST> <Warning> <org.apache.myfaces.trinidadinternal.config.upload.UploadRequestWrapper> <mia-dt-6111> <soa_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1292264365367> <BEA-000000> <Unable to set request character encoding to UTF-8, because request parameters have already been read.>*
*####<Dec 13, 2010 1:19:30 PM EST> <Warning> <org.apache.myfaces.trinidadinternal.config.upload.UploadRequestWrapper> <mia-dt-6111> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1292264370304> <BEA-000000> <Unable to set request character encoding to UTF-8, because request parameters have already been read.>*
*####<Dec 13, 2010 1:19:30 PM EST> <Warning> <org.apache.myfaces.trinidadinternal.config.upload.UploadRequestWrapper> <mia-dt-6111> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1292264370304> <BEA-000000> <Unable to set request character encoding to UTF-8, because request parameters have already been read.>*
*####<Dec 13, 2010 1:19:30 PM EST> <Warning> <oracle.soa.b2b.ui> <mia-dt-6111> <soa_server1> <Thread-39> <weblogic> <> <> <1292264370757> <BEA-000000> <*
EXCEPTION:
MESSAGE:Index: 0, Size: 0
STACK TRACE:
java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
*     at java.util.ArrayList.RangeCheck(ArrayList.java:547)*
*     at java.util.ArrayList.get(ArrayList.java:322)*
*     at oracle.mds.internal.cache.CacheKeyUtil.getRootCacheKeyAndHint(CacheKeyUtil.java:413)*
*     at oracle.mds.internal.cache.CacheKeyUtil.getRootCacheKeyAndHint(CacheKeyUtil.java:348)*
*     at oracle.mds.core.UpdateableSOContent.getCacheKey(UpdateableSOContent.java:928)*
*     at oracle.mds.core.UpdateableSOContent.cacheData(UpdateableSOContent.java:869)*
*     at oracle.mds.core.UpdateableSOContent.clearClientObjects(UpdateableSOContent.java:163)*
*     at oracle.mds.core.MDSTransaction.flushChangesToPTrans(MDSTransaction.java:638)*
*     at oracle.mds.core.MDSTransaction.internalCommit(MDSTransaction.java:2372)*
*     at oracle.mds.core.MDSSession.flushChanges(MDSSession.java:981)*
*     at oracle.tip.b2b.ui.util.FileManager.saveFileInMds(FileManager.java:450)*
*     at oracle.tip.b2b.ui.data.document.GuiDefinition.createDefTypeObj(GuiDefinition.java:328)*
*     at oracle.tip.b2b.ui.data.document.GuiDefinition.save(GuiDefinition.java:538)*
*     at oracle.tip.b2b.ui.backing.admin.AdminDocument.saveThreadAction(AdminDocument.java:1666)*
*     at oracle.tip.b2b.ui.business.admin.FileUploadThread.run(FileUploadThread.java:61)*
*>*
Edited by: Patel Sandy on Dec 13, 2010 11:14 AM

Hello Sandy,
I am not sure what exactly the problem is but it seems your domain has been messed up.
Can you create a fresh schema in database using RCU and create a brand new domain pointing to those new schemas and then try to create a b2b document definition?
Regards,
Anuj

How to configure PGP Encryption in B2B Console including jar addition ?

Hi Guys,
I have the following questions with respective PGP Encryption.Can any one clarify on this?
I have PGP Encryption jave code which does not implement CallOut Interface and which encrypt's a file
1. is it mandatory that PGP Java code having a class to implement CallOut Interface ? if yes which methods i need to implement and necessary parameters required ?
2. In what way i can add jar to the server ? Please explain the format of call out jar path for windows and linux?
3. how can i check whether the pgp jar is loaded or not ?
4. Can any one explain the steps to configure PGP Encryption in B2B Console?
Edited by: 972723 on Jan 22, 2013 2:49 AM

How to configure Call out in B2B ?

How do I get rid of the message "To use this machine for downloads, enter you Apple ID and password" which I now see twice since I downloaded the latest version of iTunes? Once is enough and no checkbox exists to say "do not show this message.....".

When I start iTunes, how do I get rid of the message "To use this machine for downloads, enter you Apple ID and password" which I now see twice since I downloaded the latest version of iTunes. Once is enough and no checkbox exists to say "do not show this message....."

Does this apply?
If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support

SOA B2B adapter(send) - B2B console not identifying partners correctly

Hi there,
My case is like this.
Trading partner is sending a doc through custom http server which B2B cant reach.
So I wrote a SOA Composite to fetch this xml from remote & then send the document to B2B.(as if partner is sending to host)
I used B2B adapter & send operation for this.
The issue is, B2B is not correctly recognizing the sender trading partner.
B2B engine is assigning the same TP for both sender and receiver.
I am setting Generic Identifier to set the sender/receiver value.
(for example... am using Google as Host & Amazon as Partner.. )
Properties Set in B2B Adapter:
28-Apr-2011 10:43:20 Sending property "b2b.toTradingPartnerId", value is "Google".Sending property "b2b.toTradingPartnerId", value is "Google".
28-Apr-2011 10:43:20 Sending property "b2b.documentProtocolVersion", value is "Amazon_1.50".Sending property "b2b.documentProtocolVersion", value is "Amazon_1.50".
28-Apr-2011 10:43:20 Sending property "b2b.documentProtocolName", value is "Custom".Sending property "b2b.documentProtocolName", value is "Custom".
28-Apr-2011 10:43:20 Sending property "b2b.fromTradingPartnerId", value is "Amazon".Sending property "b2b.fromTradingPartnerId", value is "Amazon".
28-Apr-2011 10:43:20 Sending property "b2b.toTradingPartnerIdType", value is "Generic Identifier".Sending property "b2b.toTradingPartnerIdType", value is "Generic Identifier".
28-Apr-2011 10:43:20 Sending property "b2b.documentDefinitionName", value is "PO_Defn".Sending property "b2b.documentDefinitionName", value is "PO_Defn".
28-Apr-2011 10:43:20 Sending property "b2b.fromTradingPartnerIdType", value is "Generic Identifier".Sending property "b2b.fromTradingPartnerIdType", value is "Generic Identifier".
28-Apr-2011 10:43:20 Sending property "b2b.documentTypeName", value is "PURCHASEORDER".Sending property "b2b.documentTypeName", value is "PURCHASEORDER".
28-Apr-2011 10:43:20 Invoked 1-way operation "send" on partner "SendB2BOrder".Invoked 1-way operation "send" on partner "SendB2BOrder".
As seen In B2B Console:
Sender Type     Generic Identifier
Sender Value     Amazon
Receiver Type     Generic Identifier
Receiver Value     Google
Sender     Google (????)
Receiver     Google
Any help will be greatly appreciated.
Thanks
Ganesh
Edited by: Ganesh on Apr 28, 2011 6:13 PM

Not sure, What exactly are you trying to achieve.
Please check with your TP that url should be http://<url>:<port>/b2b/httpReceiver . "http://<url>:<port>/b2b/httpReceiver" or "http://<url>:<port>/b2b/transportServlet" URLs are used by B2B to receive the http request.
To send the message out from B2B, values should be like this:
Sender Type Generic Identifier
Sender Value Google
Receiver Type Generic Identifier
Receiver Value Amazon
b2b.toTradingPartnerId = Amazon
b2b.fromTradingPartnerId = Google
This means message to going from Google to Amazon.
If still the issue persist, Send the log to my mail.
Rgds,
Nitesh
[email protected]

B2B console not working in production

I am unable to access the B2B Console URL which refers to a Load balancer.
http://abc.xyz.com/b2bconsole/faces/login.jspx
No changes were made to the environment. Below is the text that appears on the browser.
Please help.@
This XML file does not appear to have any style information associated with it. The document tree is shown below.
<?Adf-Rich-Response-Type ?>
<redirect>
/b2bconsole/faces/login.jspx?_adf.ctrl-state=zqzjahf3i_4
</redirect>

Hi,
Check if u have got any logs regarding this in the defaultTrace file. If so, try correcting it. Else remove and redeploy the application in the prod server and check.
Regards,
Harini S

See Grub menu on console

We have some Dell 860's running Sol10-1106, everything goes smoothly except for getting the Grub menu/splashscreen to display on console. This is somewhat important as they will be across the world and we need grub to select the root disk mirror if the primary goes bad.
I've tried setting:
eeprom console=ttya
and (separately, as all comments say is bad to have them together) setting menu.lst options to redirect display:
serial unit=0 speed=9600
terminal serial
I know this is the correct menu.lst as the kernel flag to redirect standard information to console:
-B console=ttya
works there. Neither works, I see nothing on the console until the OS begins booting. After that console works perfectly.
Any ideas?

We have some Dell 860's running Sol10-1106, everything goes smoothly except for getting the Grub menu/splashscreen to display on console. This is somewhat important as they will be across the world and we need grub to select the root disk mirror if the primary goes bad.
I've tried setting:
eeprom console=ttya
and (separately, as all comments say is bad to have them together) setting menu.lst options to redirect display:
serial unit=0 speed=9600
terminal serial
I know this is the correct menu.lst as the kernel flag to redirect standard information to console:
-B console=ttya
works there. Neither works, I see nothing on the console until the OS begins booting. After that console works perfectly.
Any ideas?

ODSEE 11gR1: DS server instances displayed twice in DSCC console

I recently migrated some DSEE 6.x DS instances to ODSEE 11gR1 (dsconf : 11.1.1.5.0 B2011.0517.2145) on RHEL 5.7 x64 .
When running "./dsccreg list-servers -aC" on the DSCC host, I can see all my ODSEE instances.
However, in the DSCC console, some instances appear twice, in the "Directory Servers" -> "Servers" sub-tab, and some others appear
only once, normally.
For the instances appearing twice, I have the following in the "Server" column:
server shortname:389 (server not registered)
server FQDN:389
I'd like to know how to remove the "server not registered" lines. I don't know how does DSCC build this server list, but I've checked it's
not defined under th cn=dscc tree.
The problem with that wrong display, is that for example in the replication agreements tab, some replication agreements are displayed twice too,
which is confusing.
DSCC runs in a Tomcat 6.0.35 container, and my java version is as follows:
java version "1.6.0_20"
OpenJDK Runtime Environment (IcedTea6 1.9.10) (rhel-1.23.1.9.10.el5_7-x86_64)
OpenJDK 64-Bit Server VM (build 19.0-b09, mixed mode)
Any idea ?

I did what you suggested. Both commands worked fine and produced no errors but the problem remains in the DSCC GUI.
When running ./dsccreg list-servers, it still works fine, I see all servers only once.
Also, I noticed that if I look at the GUI between the remove-server and the add-server command, each server appears
twice with the following comment between brackets: (server not registered).
After registering the server again, one the "(server not registered)" comment 's been removed but the other instance
with the comment remains.
So, the remove-server command doesn't prevent an instance from being displayed in the DSCC GUI. This is what I'd like.

Seeing twice in B2B consoles

Similar Messages

Maybe you are looking for