Seeking Advice on Rejecting MR2 Update

It appears that I may be on of the few very lucky TB users that has been satisfied with it's performance since I purchased it shortly after its' introduction.  I also rushed into the MR1 update and got lucky again.  When the MR2 came out I started checking again and went through all the ailments of everyone here.  Fortunately I quit checking for the update a few weeks back.  Two nights ago I caught a pop up window indicating there was an update available and the it would install in x.xx time and was counting down, same thing happened last night, both times I rejected the update.  
Will the update, now, be continually pushed to my phone and I have to hopefully catch the pop window and reject it or will the system figure out that I am rejecting the update and finally give up the push to update?  I sure don't want to be checking for the pop up window all the time.
Thanks for any information

AZSALUKI wrote:
the problem is that the update did nothing to improve the performance if your device already works fine. all it does is add more bloatware. there's NO reason to have to insatll it if you don't want to......particularly if you were fortunate enough to have the version of skype that previously worked on the tbolt. i was flawlessly making video calls until this update rendered skype useless. i can think of many reasons NOT to get the update....but no reason to get it. 
unfortunately though, i'm afraid it will force itself onto your device at some point. i don't know if there's anything that you could possibly disable to prevent it?
I don't disagree with that. I think the only performance improvement was probably to try to fix the random reboots, but like you said, if you didn't have the problem, you probably won't notice any change. The only extra Verizon addition that I saw was the MyVerizon app. I don't really need it since I have the unlimited hotspot, so I don't need to keep track of that data and I can choose not to use it. I just have it on because I like to know how much data I'm using even if it is unlimited and it's a little more convenient than doing it on the web site. Was there more than that added? I look at everything that is running pretty often and I haven't seen anything else. Not disputing you, I just want to know if there's something else I should be looking for.
I just don't think Verizon is going to let you keep using the free hotspot forever just because you don't update since that is costing them money. It's just my opinion that you will end up being charged for the hotspot even if you do manage to put the OTA off indefinitely. I wanted the $30.00 unlimited Hotspot and I wanted to make sure it would be my choice and not Verizon's because I think they prefer the tiered system to the unlimited. I really don't know if they can tell if you're using the hotspot. I use to think they could because the last time I got a bill in the mail, it showed both the phone data and hotspot data, but I'm not seeing that when I look at my bill on the web site.
As far as Skype, I don't use it, but I have read on other forums that some have had problems with Skype since the update and others haven't. And as usual, I've seen different fixes that work for some and not for others. Another update inconsistency. That seems to be one of the prices you pay with Android. There are so many different phones from different manufacturers that it's hard to do an update or develop an app that will work for all of them. Even those of us with the TBolt have different experiences. The alternative is the one I had before Android and I don't want to go there again.
The only thing that seems certain is that no one is certain about anything and it's all mainly just speculation. But, that's fun also.

Similar Messages

  • Seeking advice: moving universe between systems

    Hi all,
    I've been spending some time trying to work through the Business Objects documentation to try and understand what's involved in migrating a Universe from a non-SQL Server based system to a SQL Server based system.
    I'm seeking advice not having used Business Objects as I am attempting to estimate the work involved for a customer who currently uses BO. I don't know whether it's just a simple exercise of changing the database connection, or whether more work is involved. I've tried to get this information through SAP formally, but not currently being a BO customer they've refused to answer any questions.
    During the course of the migration of the underlying data tables, some columns in some tables have changed their data-type (e.g., from smalldatetime to datetime, or changes in length/precision). I'm also not sure if the tables have changed name: in the old system, they are named in a SQL type manner (i.e. <prefix>.<tablename>) however in SQL Server the objects will be placed in a database named <prefix> with each table being named <tablename>.
    Would this potentially require a full drop of every object in the Universe, or could this exercise be achieved without having to remove and re-add any objects by saying "this object in the Universe is now this object in the database".
    Any advice welcome.
    Cheers,
    Chris...

    Hi Chris,
    The universe is quite a simple tool in that it maps the sql directly to objects. So if the universe points to a table name that is no longer present, you wil get an error in the report, or when you check the integrity of the universe (tools, check integrity)
    The standard formats will move accross without an issue, however it is possible to use vendor specific code in objects. So for instance I could write
    nvl(my_table.my_col, 0) in Oracle
    or
    IsNull(my_table.my_col, 0) in MS SQL.
    If you objects contain these defintions then your job is going to get harder.
    Regards
    Alan

  • Seeking advice ABAP With BW

    Hi Friends/Professional,
    I am working as ABAP Consultant, i would like to learn new technology in sap, i am seeking advice please help me.
    As a abaper shall i select BW or XI or ABAP HR
    which is best acording to industry india/us market.
    i am not interested in coding, please advice,
    few friends giving advice BW.
    shall i go BW or any other module.
    please give advice asap.
    Thanks in advance
    Manisha

    Hi,
    If ur good at ABAP, learn BI/BW, it is the best combination to prefer. Usaully ABAP''ers learn BW very fast( seen this practically). so go ahead & learn BI/BW.
    The  BI BOOKs /Material's which is provided bySAP:
    TBW10 (BI – Enterprise Data Warehousing)
    TBW20 (BI – Reporting & Query Design)
    TBW41 (BI – Extraction with UDI & XI and APD)
    TBW42 (BI – Advanced Enterprise Data Warehousing & Reporting)
    TBW45 (BI – Integrated Planning
    For syllabus details....check the following link...
    http://www.sap.com/services/education/certification/certroles/certificationtest.epx?context=FFC760B8923D16BB5150DAE63E7C1A6B331AF0B9E3A8F73CE3A9B7046E051044503600C911DBA13DCE978D3AC9057626D2B68111A7CD2D707E2EEC31213097E46EB790DD0106435EE0756F7B22F3FA4B4FF0645C06954BF3A150E023B4164DA2C3943DE02E599735DB9B4334B30B38FF20A1DC779D8F55E5F7A6893BDBFA38B94CF455E2A3E0E6851014966C90C80E173937CF7C2372A6FC%7cDA891B3C877030D9765B85CAE6AC82FC3EB6BC7DA10B7335
    Hope this helps,
    regards
    CSM Reddy

  • Seeking advice on SAP/cloud

    Hello all,
    Will be doing proof-of-concept on SAP on cloud, installing ERP and seeking advice/feedback.
    Based on the criteria of easier installation and faster delivery (and of course success story), what will be the recommended combination of platform (LINUX, Windows) and database (Oracle, MS SQL, MAXDB, DB2).
    Thanks in advance.
    Regards,
    Terry

    There are lots of  documents in SDN and other forums which will give much better idea ... but these are my observation
    Installation - Once you have gone past the access process to the cloud environment, after that you can hardly differentiate whether you are on doing a install on cloud or non-cloud. Though definately the time to get the infrastructure for install is much faster.
    Windows or Linux - I would put it as windows or Unix, not sure how many providers offer other flavors of Unix apart from Linux. But obviously the Product itself to some extent will govern what you choose, as has been the case in non-cloud env.
    Database - Again have seen Oracle and DB2 being mostly used. Not sure why, may be stuff like doing system refresh in 15 min ,  etc  are easier to achieve with products like Oracle and DB2.
    Regards,
    Neel
    I dont have any exposure to windows on cloud. So i am not aware of specific positives it might have in cloud.
    Edited by: Neelabha Banerjee on Nov 22, 2011 3:40 PM

  • Seeking advice for backing up Xserve G5 w/ RAID PCI card

    Hello all!
    I'm a newbie to Macs and server admin, and I have inherited the job of setting up a server at work for file storage. I'll do my best to give a concise description of our set-up - I'm looking for some advice on the last few odds and ends... mainly how we can backup the system.
    We bought an Xserve G5 with an option RAID PCI card. We have 3 500GB drives in the Xserve, configured to RAID 5 (giving us effectively 1TB of storage space). We will be using the server for data storage. About 20 computers will access the server over a network; we are using an assortment of Macs and PCS.
    I am seeking advice on backup systems for the server. In the event that the RAID5 fails, we don't want to lose our data. We just need a snapshot of the server; we don't need to archive data or to take the HD offsite. Our old server just used Retrospect to run incremental backups every night (with a complete clean backup once a month). Our current thought is to attach large external hard drive to our admin computer (not the server directly) and run nightly backups as before.
    The major points I have are:
    -Any thoughts on reliable 1 TB external drives?
    -Any recommendations on software that can backup from a RAID over a network? I found info for Retrospect Server 6.0 - it seems to do what we want, but is rather pricey.
    Thanks in advance for any advice! I really appreciate it!
    Xserve G5 Mac OS X (10.4.2)

    Greetings-
    We all started out as newbies at one time or another-no worries. That is why we are here.
    I personally use the Lacie branded drives. They are sturdy and reliable. My only thoughts here are to have at least three external drives-one for today's backup, one for a backup stored securely nearby, and one to be securely stored off-site. Rotate the drives daily so that your worst-case scenario will be a catastrophe that requires you to use a three-day old backup, depending upon how old your off-site backup is. Not ideal but better than the alternative. External drives are cheap enough these days to allow you to do this at a reasonable cost. Plus it is easy enough to throw one in a briefcase and tote it home for safety (just don't lose it!)
    I would stay away from Retrospect. If you search these forums you will find several instances of folks having some serious issues with the program. I use a program called Carbon Copy Cloner that does the job nicely for my basement server. There are ways to do the backups via the command line interface as well but I am not so familiar with those commands. You may have to dig a little deeper to find something that works for you.
    One of the other advantages of the FW external drive is that you can share it with other users, so perhaps you can set things up to have your network backups to go to that drive. Tis a thought.
    Luck-
    -DaddyPaycheck

  • Seeking advice on moving up to HDV editing

    I appreciate folks on this forum who have assisted me in the past when I’ve had questions about iMovie, editing, burning DVDs etc. Karsten, Lennart, Bengt and others from around the world have been very kind and helpful. I am now seeking advice from anyone regarding “moving up” to the HDV world of video editing.
    I recently "retired" my 2003 iMac G4 800 MHz flat screen and replaced it with an iMac 2.8 GHz Intel core 2 duo with a 320 GB hardrive and 4 GB of upgraded RAM. I have a 250 GB external drive as well. I also replaced my old Sony TRV-30 digital camcorder (a great old workhorse which is still going strong after 8 years) with a Canon Vixia HV40 that has high definition recording capability (uses mini DV tape).
    I had been using iMovie HD 06 to edit my video projects along with iDVD and Toast 6 to burn them to DVD. I would like to start shooting HDV video with the new Canon, edit and burn the projects to Blu Ray high definition discs. MCE Technologies (among others, I believe) offer both internal and external Blu Ray burners. I don’t believe that the internal Blu Ray burner would work in my new iMac, but I may be wrong on that. (Does anyone know the answer?)
    I believe that the MCE external Blu Ray burner would work with my equipment if attached to one of the Firewire ports or possibly through one of the USB 2 ports. (there is both a 400 and 800 Firewire port on this iMac model.) I was planning to acquire Final Cut Express as the editing program with Toast 10 Pro (plus the Blu Ray plug in) to burn the edited projects.
    Will this work? Is there anything I should know before I plunge “headlong” into HDV editing? Any advice would be most welcome. Thanks in advance.
    Message was edited by: scooper

    scooper wrote:
    .. iMac 2.8 GHz Intel core 2 duo with a 320 GB hardrive and 4 GB of upgraded RAM. I have a 250 GB external drive .. Canon Vixia HV40 .. external Blu Ray burner .. Final Cut Express .. Toast 10 Pro (plus the Blu Ray plug in)
    Will this work?
    I'm jealous.. wow! MY set-up..
    HDV is supported by IMHD6.. just to mention that. so, HDV-editing is same as SD..
    iMHD6 Export 'FullQuality' creates a file, which is HiDef too, for your Toast/BR workflow ..
    HDV creates on import (IMHD6/FCE) huuuuuge files, 40-60GBs/h .. 250 extHDD = 6h, full..
    actual price for extHDD with 1TB <100€ ..
    keep in mind: internal harddrive has to offer any time 10-20GBs free..
    not every BR-standalone-player accepts homebrewn disks..don't be disappointed...
    Toast and iDVD can burn DVDs (=which offer SD only) from HiDef projects.. no need to 'convert'.. both apps downsize automatically...
    FCE has a (very) steem learning curve.. totally different to iMovie.. no one-click-only, no templates, no ready-mades.. but zillions of options, 101% control.. (simple example: ken burns with zoom-to-zil and rotation and moving out of frame...)
    buy a book of FC Mastermind and AppleDiscussions-Level5 supporter *Tom Wolsky* - he's a sensei, in-depth-knowledge, hands-on (=no tech blabla), easy to read and understand.
    don't start with a project, start with 'tests for the trashbin'..

  • Seeking Director 3D developer to update water feature simulator

    Seeking Director 3D developer to update water feature simulator originally (brilliantly) coded by Brian Robbins and James Newton. (see: www.H2Oarts.com/simulation.htm) Thanks -Scott - i n f o @ H 2 O a r t s . c o m .

    Seeking Director 3D developer to update water feature simulator originally (brilliantly) coded by Brian Robbins and James Newton. (see: www.H2Oarts.com/simulation.htm) Thanks -Scott - i n f o @ H 2 O a r t s . c o m .

  • App rejected due to localStorage issue, seeking advice.

    Hello everyone, Apple has rejected our application because we store files for offline viewing  under localStorage (/Documents)
    This is an extract of the message, we received :
    Data that can be recreated but must persist for proper functioning of your app - or because customers expect it to be available for offline use - should be marked with the "do not back up" attribute. For NSURL objects, add the NSURLIsExcludedFromBackupKey attribute to prevent the corresponding file from being backed up. For CFURLRef objects, use the corresponding kCFURLIsExcludedFromBackupKey attribute.
    How can we do this with Adobe Air using Flex SDK 4.6?
    +LA

    Alright, again I must emphasize that this is not an easy thing to get going, at least it wasn't for me.  However, I have a 5.1+ solution made building on the jampot extension available here:
    http://www.jampot.ie/ane/ane-ios-data-storage-set-donotbackup-attribute-for-ios5-native-ex tension/
    Replacing the ANE file in the zip provided by jampot with the one linked below should then cause calls to that extension to follow the new 5.1 method.
    http://bit.ly/QbeVCg
    The extension documentation has more info on how to use it, but for a quick start, we use something like:
    if (flash.system.Capabilities.version.substr(0,3).toUpperCase() == "IOS")
         var noBackupSetter : MobileBackup = new MobileBackup();
         var result:Boolean = noBackupSetter.doNotBackup(DataStorage.filePrivate.nativePath);
    This will set the entire File.applicationStorageDirectory to DoNotBackup.  Files that are saved within the directory will obey the DoNotBackup rule for the containing folder.
    Make sure you have the MobileBackup class from the files provided by jampot in your project and that you have included the native extension in your project and packaging.  If you have trouble with any of that, please reference the jampot link above, with the exception of using the 2nd link's ANE file.
    Two important notes--
    First, I have only had success compiling my project using this ANE on a Mac against Air 3.3 with the project pointed directly to my iOS 5.1 SDK folder, found at
    /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPho neOS5.1.sdk .  (I am using Xcode version 4.4.1, I do not know if this sdk is available in later versions, but it may be possible to find an upload of someone's copy on the web)
    Second, the code the modified ANE uses requires iOS 5.1.  If you submit an app that uses this ANE and it is installed by a pre-5.1 device, the app will immediately crash.  To keep your app from being installed on pre-5.1 devices, modify your AppName-app.xml file in the root of your project to set the MinimumOSVersion like so:
        <iPhone>
            <InfoAdditions><![CDATA[
                                  <key>UIDeviceFamily</key>
                                  <array>
                                            <string>1</string>
                                            <string>2</string>
                                  </array>
                                  <key>MinimumOSVersion</key>
                                  <string>5.1</string>
                        ]]></InfoAdditions>
            <requestedDisplayResolution>high</requestedDisplayResolution>
        </iPhone>
    I'm sorry I don't have access to the changes I made to source at this time, but I will post again when I can to include the specific changes made.  There really was not much change to the objective-c code.  The hard part was getting the ANE built and working with Flash Builder.

  • Consistent, long-standing performance issues -- seeking advice

    I have a performance problem with my system. It's a problem that's lasted me years, spanning 3 different computers. This leads me to believe it's not the hardware, but something about my system. As I've moved from computer to computer (as well as when I've reinstalled the system), I've taken pains to skip the Migration Assistant and move over preferences and Application Support one by one, in an attempt to isolate and remove the bug. This always appears to work for a while, then inevitably it goes back to it's same, unresponsive, jittery, occasionally slow self. I'm considering getting a new computer, and I want to try to isolate this problem before I go through the process again.
    Here is a list of symptoms. Scroll to the end to read what I've tried to do to fix it.
    DISAPPEARING FINDER
    Once in a while, when waking from sleep, the icons on the Finder disappear. The Finder is be usable, and I can create Finder windows, but the icons aren't there. Fixed by force-restarting the Finder.
    MESSY ICON
    OIAW, when waking from sleep, the mouse arrow will be replaced with what appears to be random lines and static. Easily fixed by hovering over a text box and forcing a cursor change.
    SAFARI BEACHBALL
    I know Safari can be slow as a matter of course, but sometimes mine just GRINDS. I have to either force-quit it or leave it for a while for it to catch it's breath. Some common triggers are Flash embeds (no surprise), big pages, or pages with big photos. Almost always, a page with a lot of photos (like Big Picture), will be impossible to scroll smoothly.
    GARBLED MENUBAR
    Occasionally, I'll look up to the menu bar to find it a garbled mess. It appears as if the menus from more than one application are overlain on top of each other. The bar is still useable, and if I click on any menu, it redraws itself properly.
    MOBILE ME IS A ************
    This is probably the biggest, most consistent, easiest to replicate problem. When Mobile Me is syncing, I might as well not even try to use the computer. It seems to gobble up all memory, making everything else practically useless. I have it set to sync automatically, but I'm pretty sure I've tried hourly and daily and the same problem occurs. (Also, FWIW, I think it's syncing a lot more than it needs to -- not a lot changes from sync to sync. But I'm not sure how to prove this.)
    SLOW DOCK
    If it hasn't been in use for a while, the dock will take a second or two to show (it's positioned on the bottom, hidden).
    FONT CORRUPTION
    This hasn't been happening much lately, but for a while, particular base system fonts would suddenly stop working. The files were still there, and active in FontBook, but they wouldn't work in applications. I would have to remove the file from the System/Library/Fonts folder, then the system would recreate it, and it would work again. This would sometimes happen out of the blue.
    The one consistently corrupt program in this respect is Google Chrome. It's never been usable -- all characters within the window frame are the weird box with a serif A in the middle. (Strangely, the text in the chrome itself -- bookmark text, tab text, etc -- works fine.
    ITUNES STUTTER
    Sometimes the computer is so consumed with whatever it's doing that iTunes will stutter.
    DOCK STUTTER BOUNCE
    Often when opening an app, the dock icon doesn't bounce smoothly, but rather stutters up and down.
    TRANSPARENT MENUBAR
    Sometimes the background of the menubar disappears. Weirdly, the shadow remains.
    SLOW DASHBOARD
    Even after the Dashboard has been loaded for the first time, it can be grindingly slow. It usually zooms into place okay, but activating an module and using it can take 10-20 seconds.
    SLOW SCROLLING
    Sometimes, very rarely, the whole computer will have a scrolling seizure -- scrolling a window will become VERY unresponsive, and very stuttery when it finally does respond. Happens to all apps, and quitting the app doesn't appear to fix it. Only restarting (or logging out and in).
    COVERFLOW
    Like other things, can be jumpy.
    IN SUMMARY, **** IS SLOW
    Basically, sometimes everything just slows. Even the simplest thing is impossible to do, like opening a menu, or finder window, or typing -- it'll stutter and spits out my letters in big chunks.
    *--- THINGS I'VE TRIED ---*
    I've added more RAM. When I went from 2GB to 3GB, things appeared to be fast again. That lasted a few days. Later, I went from 3GB to 4GB, with no noticeable change.
    I've cleared out my fonts. I deactivated all fonts in FontExplorer except for a couple dozen essentials.
    I've verified all fonts in FontBook and removed the offending ones. I fixed any conflicts in FontExplorer.
    I've cleared the cache any number of ways, including with Cocktail. Cocktail offers a variety of configurations for cache clearing, and I've tried a bunch of them.
    After doing all the above for the first time, I actually thought I had cleared out whatever ugliness was invading my system. Things were opening snappily, and Flash movies were playing smoothly. That lasted a day, and things went back to normal. I've tried it again several times since, and while I've seen some mild improvement, it's been nothing like that one miraculous time.
    *--- WHAT NEXT? ---*
    I've seen Apple Store Geniuses about this a few times. It's been very frustrating. What it usually comes down to is: reinstall your system. I did it the first time they suggested it, and the problem always came back. I'm not going to do it again, because it's a major hassle, and obviously doesn't fix the problem.
    The other thing they say to do is look at Activity Monitor. I have done that, but I'm not totally clear what to with the information I see, other than to quit more apps to free more memory. Here's the thing: I'm seeing no discernible difference in free memory between a 3GB system and 4GB system. Same slowness, same sliver of free memory in the pie chart.
    I've done a lot of looking around online, including in this forum, and the one thing I read consistently is that you want to avoid pageouts. I look at my Activity Monitor and see gigs and gigs of pageouts. What I can't find is tips on how to reduce them.
    I've been living with this for a while, because it's just on the threshold of tolerable. It comes in waves, and the times of easygoing make it easy to forget the annoying times. But I'd like to fix it at its root. If you have any advice, I'd love to hear it.
    *--- SCREENSHOTS ---*
    - The garbled menubar
    - An example of very active Activity Monitor with 3GB
    - And one with 4GB
    Thanks!

    Erase the hard drive, install 10.6 from scratch, download and install the 10.6.3 vers. 1.1 Combo Updater, then allow Software Update to download and install any other additional software.
    Do not yet reinstall any third-party software but take some time to test out everything, In this way you will be able to better now if some problems remain which may be indicative of hardware malfunction.
    Since you say these problems have been long standings, I'm surprised you didn't downgrade to Leopard or take the computer in for repair. Letting problems go without solution tends to cause new problems and/or exacerbate existing ones.

  • Advice needed on firmware update-

    Hi everyone… I have successfully replaced the HD on my kid’s imac G3 [yay!] but the [secondhand] disk is running a very old version of OS X [10.0.4, I think…]. Can anyone let me know if I need to carry out any firmware updates before installing Tiger? I’d be so grateful for your advice… many thanks!

    Hello,
    If you need firmware updates, then you'll have to re-install OS 9.1 (or 8.x or whatever version came with your system) to install the updates.
    You cannot update the firmware from OS X on the older iMac G3 systems.
    If you already have the latest firmware revision, then you may not need to worry about re-installing OS 9 to install the firmware updates at all.
    Take a look at this discussion here:
    http://discussions.apple.com/thread.jspa?messageID=2707137&#2707137
    That discussion will show you how to check the version of Firmware that you currently have.
    This will help to determine if you already do have the latest version installed.
    Keep in mind that the firmware revisions shown in this discussion relate to the iMac G3 333 MHz system.
    If you have an iMac G3 350 MHz or faster (the ones with the slot-loading CD-ROM Drive), then your firmware revision numbers should be 4.19.
    The firmware version / update for the slot-loading CD-ROM drive machines is here:
    http://docs.info.apple.com/article.html?artnum=75130
    For the older iMac 333 MHz or other iMacs with a tray-loading CD-ROM Drive, the update you would need is here:
    http://docs.info.apple.com/article.html?artnum=60384
    Note, that you will need to re-install which-ever version of Mac OS that came with your computer to install these firmware updates.
    But, if you find that you already have the latest firmware version for your computer, then you can skip re-installing OS 9 (or whatever came with your system) all-together.
    If you cannot make sense out of the numbers you find when comparing them to the update, let me know what the numbers are that you find, and I'll see if I can help you out.
    If you do re-install OS 9 or OS 8.6 (whichever is needed for your system's updates), then also consider getting the other updates for your system while you are at it:
    http://docs.info.apple.com/article.html?artnum=58174
    You'll find updates for your modem, and CD-ROM drive there.
    I hope this helps.

  • Advice on 4.4 Update

    I have a very simple system, Laptop running Windows 7, 3Gb Ram, 2.0 Gh Processor, secondary 20 inch monitor  - Within the limits of what I do Lightroom 4.3 works flawlessly for me. Very rarely do I print anything, Images are kept  at 8 x 6 inches resolution either 240 or 300. Currently I have no issues with either Photoshop Elements 11, The Nik Plugins or any presets.  The question is simple is there anything to be gained by updating to 4.4. What I've read makes me a little wary and common sense says if it isnt broke don't fix it.
    That said the system ( If you can call it that) is well protected by Norton Ghost. Any advice from the experts would be appreciated.
    Regards
    Rick

    If you are worried do what you should do anyway, backup. If you do not backup how can you ever think of downloading or doing anything on your computer. When you upgrade you will have a fallback for if you have any issues with errors. The program always works better updated anyway because more often than not you will find things have been changed for the better in the newer version. The issues that have happened on here are largely to do with browsers and library issues which are easily rectified. Older Operating systems do cause issues. But you seem to have a Windows 7 Laptop with no issues. Just make sure you system is up to date with Windows and vendor updates like Graphics and service library updates. Back up and update. With software like Acronis Backup you can even save the machine state and reboot in seconds to the previous software and settings if you are that worried.  I hope this helps.

  • Seeking advice/recommendations on a wireless networked camera for personal home security

    Greetings forum! I am in need of advice/recommendations for a medium quality (less than $200) camera that I can set to record via my Airport Extreme network. This is mainly for home security, to watch the main entry point of the domicile. Alerts and/or viewing live stream remotely needed; I am considering the following model and welcome any feedback from those with knowledge/experience. Has anyone used the following and if so, how would you rate such things as ease of use, compatibility, ease of set-up, etc.
    Linksys - Wireless-N Internet Home Monitoring Camera
    Model: WVC80N   |   SKU: 9506652
    Thanks in advance.

    I answered the questions that were asked. "What will be, will be"
    If you want to talk about security in relation to malware in general:
    While there are no known viruses that attack Mac OS X at the present time, it is possible for spyware to get onto your Mac.
    So I go to lenghts to protect my user. A hosed system can be replaced but a compromised user folder is compromised forever. Along with all your important data like bank records, credit cards, ... I.e. your "identity" stolen.
    The best way to avoid that is by using your built-in firewall which is industrial strength and/or a hard wired router, downloading only from "trusted" sites, installing all security updates and being careful about what you give administrative power to. It is also recommended to run day to day tasks from a non-admin account.
    Don't use Limewire or any other P2P service to download your software, get it from reputable sources. In addition, always keep at least your users backed up, preferably a clone of your entire system on a separate disk. And put your sensitive passwords, bank accounts, credit card numbers in a "secure note" in a new keychain or in an encrypted folder.
    If and when a Mac virus does appear it will be headline news and you can download the AV software then. If you feel you have to run an AV program I'd suggest ClamXav a mac friendly freeware app that is very stable with OS X. It will check for known virus signatures at any rate.
    Hope this helps.
    -mj
    Message was edited by: macjack

  • Need Trigger reject when update more than 1 row

    I need make a trigger who rejects when a user intents update more than one record.
    The user only can update one row, but when update without WHERE all data was modified and cause problems.
    Thanks,
    MIGUEL ANGEL CARO
    [email protected]

    YTou can keep track of the number of updated records in a global package variable, as in the next example.
    create or replace package pkg_test as
    g_count number;
    procedure p_reset;
    procedure p_increase;
    function f_updated return number;
    end;
    create or replace package body pkg_test as
    procedure p_reset is
    begin
    g_count := 0;
    end;
    procedure p_increase is
    begin
    g_count := g_count + 1;
    end;
    function f_updated return number is
    begin
    return g_count;
    end;
    end;
    create table ttemp (t_col varchar2(10))
    create trigger bu_tmp before update on ttemp
    begin
    pkg_test.p_reset;
    end;
    create trigger au_tmp after update on ttemp for each row
    begin
    if pkg_test.f_updated > 0 then
    raise_application_error(-20000,'Trying to update more than 1 record at the same time');
    end if;
    pkg_test.p_increase;
    end;

  • How to reject unwanted update

    How do I reject an unwanted update that appears in the AppStore icon, i.e. Remote Desktop Client Update, which I have no use for.

    Hide Updates     Mountain Lion

  • Seeking advice for a nagging BT related issue

    Dear Forum,
    I would appreciate your advice on a performance issue related to using the BT SW stack.
    *Some information*:
    Non-Toshiba notebook, Intel dual core @ 1.2 GHz, 2 GB RAM, running WinXP pro (5.1.2600 SP2 Build 2600), all MS updates, company computer, MS Office 2003. I got the PC two months ago and separately purchased the 'Wireless 360' internal Bluetooth USB module (Toshiba device, VID 413C, PID 8140, firmware 43.15). I installed the hardware module and BT software stack (Toshiba BT Stack, version v4.41.02(D)). I'm using BT mainly to connect to my mobile phone, for which 'Nokia Suite' v6.85.141 is installed. The Nokia Suite works fine and as expected using the BT link.
    *Problem*:
    When opening a .doc/.xls file by double clicking it in Windows Explorer, the system response is very slow. Like 40 (!) secs to open a 30 KB Word document. This is reproducible. For some other files, like .pdf the response is much better. Starting Word via the start button and using Word's file/open to access the same file is OK. Opening Windows Explorer using Windows-E hotkey is very slow as well, opening Windows Explorer via start menu is normal.
    I do not see any 'heavy' disk access or 100% CPU during the delay.
    For the rest, the notebook seems to run OK.
    *Findings so far*:
    1) Re-installing the Toshiba BT Stack did not improve things
    2) When shutting down the PC, frequently the TosOBEX.exe process needs to be ended &lsquo;manually&rsquo;
    3) Uninstalling the BT SW stack makes the PC respond normal again
    4) Disabling the BT Manager (system tray, right click BT icon, exit) has same effect
    5) Stopping the TosBTmng.exe process removed the problematic effect as well
    6) Starting the PC with all non Microsoft processes disabled &ndash; except the BT stack &ndash; give a normal responsiveness (!)
    7) Uninstalling McAfee virus scanning tools does not help
    8) Replacing the BT stack with version 5.10.12(T) solves the issue, but creates another problem: process &ldquo;services.exe&rdquo; continues to consume too much CPU time (~35&hellip;40%)
    9) I have not been able (yet) to identity the non BT process(es) which effect(s) this problem
    *Questions:*
    Anybody familiar with this effect?
    Any suggestions for next steps?
    Forum&rsquo;s advice would be appreciated!
    Wytze

    Hi people. Same thing here.
    My Satellite A100 delays opening word and excel 2003 documents only when bluetooth manager is running.
    I don't see a cpu load on the services process though (or any other process for that matter).
    I had version 4 installed when detected the problem. Switched to 5.10.12(T) and the wait time is still there.
    Then I followed the previous post suggestion of wiping-out everything bt related and install again. But still no luck.
    Even reinstalled office but that didn't help either.
    Some maybe useful information: I'm running Nokia PC Suite 6.85 over bluetooth and Adobe Acrobat Professional 8 which integrates menus in Word and Excel.
    Wait time still occurs when killing all PC Suite processes or changing acrobat installation to not integrate in word.
    This kind of time wait resembles some king of name resolution timeout. But why only office apps?
    Has anyone already have any light to shed on this?
    Regards
    --Fernando

Maybe you are looking for