Seeking some clarification of the default Privacy policy link

We have just got a warning from Microsoft stating an app has the following problem:
The privacy policy link did not resolve to a functional webpage..
I checked the privacy policy link and found it points to the app's store page, not privacy statement page. I guess this is a problem. Here is the strange part:
I handle privacy policy in exactly the same way for all our apps - adding a Privacy statement to the Settings pane. All apps' settings panes are handled the same way. However, this app has the extra Privacy policy link. Other apps do not. I do
not know how to get rid of it.
Out of curiosity, I started checking other apps to see if they have the same issue. To my surprise, the Weather app by Microsoft has exactly the same issue - it has a privacy statement link that works correctly, and a privacy policy link pointing to
the app's store page. The following is the screen capture of the Weather app's Settings pane:
Could anyone offer a tip on how to handle this and shed some light on why some apps have the extra Privacy policy link and others do not?
Hong

The Home button is part of the global buttons region file, located in /public_html/common/regions/menuGlobal.jspx.
This region file is included in all generated pages. The home button has the action property set to "home", so you can add a global navigation rule to the faces-config file to specify the page you want to go to:
<navigation-rule>
<from-view-id>*</from-view-id>
<navigation-case>
<from-outcome>home</from-outcome>
<to-view-id>/pages/Home.jspx</to-view-id>
</navigation-case>
<navigation-case>
Steven Davelaar,
JHeadstart Team.

Similar Messages

Just needed some clarification regarding the Viewer Builder and actually publishing your App...

If someone could let me know if my understanding is correct, that'd be a huge help... So I've designed my publication in InDesign and exported the .zip file from the Folio Producer. I've created all of my certificates/splash screens/icons. Lastly, I just recently went through the steps of the Viewer Builder. I'm now at the stage of this process that requires me to purchase the $395 single edition so that I can enter the serial number in the last stage of the Viewer Builder. Now, to my knowledge, once I get the serial number, Viewer Builder will then give me access to an .ipa file and a .zip file. The .ipa file is for me to test on my iPad, and the .zip would be used to distribute to the App Store. I guess this is where I get confused... Let's say after I test the .ipa on my iPad, I don't like some part of my publication. I know how to update my own documents obviously, and I understand that I would have to export another .zip file from the Folio Producer, in turn requiring me to edit the exported folio link in the Viewer Builder. If I had to do that, would I need to purchase another single edition serial number since the original App was edited? Or would the same serial number apply since I'm editing that same App in the Viewer Builder? My next question is somewhat similar. Let's say all of the information is up to date and I go ahead and publish the App to the App Store. However, maybe a month later or some time in the future, I needed to update a phone number or email address--some little detail like that. Again, I understand that I'd have to update the export link in the Viewer Builder, but would I then need to create a new app since my app was already published? Would I then have to purchase another $395 single edition serial number just so that I can update my information? This seems to be the only thing in this whole process that I could use some clarification on so that I don't run into any surprises in the future. Any help would be great, thanks!

Hi Joshua,
When you have purchased the serial, you can rebuild your app with your updated content, as long as you use the same bundleID (applicationID), that is tied to your Apple mobile provisioning profile. The serial number is valid for a one year period.
After you have submitted your app to Apple and it has been approved, please read: http://forums.adobe.com/message/4172167#4172167
With kind regards,
Klaasjan Tukker
Adobe Systems

Question regarding some fields on the default page layout of Leads

Hi Everyone,
I've noticed in the default page layout for Leads that their are fields called 'Owner Account' and 'Channel Manager'. I would like to ask to what those fields are for since they are only 'read-only'. My initial thought was the 'Owner Account' refers to the owner of the account if I associate the lead with an Account and the 'Channel Manager' was to contain the 'Report to' or 'Supervisor' of the users that created the lead but it seems not to be it.
Thanks,
Wayne

Hi Dave,
In continuation with Marcin's reply, I would like to suggest you a workaround.
I had a similar requirement wherein I had to merge the output of multiple smartforms into one and either display it or print it.
For this, as Mercin has already suggested, you can call the smartform(in loop) with the get_otf and no_dialog paramaters of the
CONTROL_PARAMS structure (which you pass to the smartform function module call) to 'X' and fetch the output in OTF format
from JOB_OUTPUT_INFO paramater of the function module call.
Being in a loop you would get the OTF for every smartform call inside the loop. Keep appending the OTFDATA field of the
JOB_OUTPUT_INFO structure to that of another JOB_OUTPUT_INFO structure(this will hold the otf for all the smartforms togather) .
Once that has been done for all the smartforms , you will have the OTF output of all the smartforms which you will need to either
display as a print preview or print, for which you can use either the function module SSFDISPLAY_OTF or SSFPRINT_OTF.
Hope this helps.
Regards,
Sagar

Changing the default "New Item" link url in SharePoint

Is it possible to change the default url of the New Item button on a list.
When i hover over or click on new item link it show the ......../15/listform.aspx?Page type=blah.....blah......
I want it to be something like :/newform?source=xxxx
Please help me !
Thank you !

Hi,
The following code for your reference, please add the code into a Content Editor Web Part in the list view page.
<script type="text/javascript" src="http://code.jquery.com/jquery-1.11.2.min.js"></script>
<script type="text/javascript">
$(function () {
$("#idHomePageNewItem").attr("href", "http://site/list/newform.aspx?source=http://...........");
$("#idHomePageNewItem").attr("onclick", "");
</script>
Best Regards
Dennis Guo
TechNet Community Support

Some worksheets missing the format and stoplight link in viewer

I have a set of workbooks that are pretty simple. Each has from 1 to 4 worksheets. I have one workbook where two of the worksheets when run through viewer do not show a format or stoplight link, but the other two do show the links. Is there something that blocks these links from being displayed?

This issue occurred in our system too.
We are running Oracle BI 10.1.2 on a Windows 2003 Server machine. The "format" and "stoplight" link suddenly disappeared from Disco Viewer.
Does anybody know what can have caused this?
ps: moreover the font of the Viewer page is smaller since this happened

Migrating from SRM 7.0 Classic to ECS - Seeking some clarifications

Hello Friends,
We are now planning to upgrade from SRM 5.0 to SRM 7.0 and then migrated to Classic to ECS. We have the below challenging points which I need clarification,
1) How do we go about the Taxation and Pricing Part, If we migrate from Classic to ECS
2) Presently we have R/3 contracts in place and the same is linked to MDM catalogue and now the client wants the contracts to
    be in SRM. In that case how do we go about the strategy.
3) Asset Procurement: Now all WBS element are converting into assets by running the Z-Program in between PR and PO in R/3
   system. But when we migrate to ECS PO gets created in SRM, so how do we go about the asset procurement in ECS scenario.
4) Confirmation and Invoice transferring to R/3 through Idoc distribution Model. Going forward in SRM 7.0 the same will continue or
    do we go with SOA. Please confirm.
Further to this can you please let me know, what are all the major challenges for upgrading the system to SRM 7.0 and migration from Classic to ECS.
I would appreciate for you quick response. Points will be awarded for appropriate answers.
Thanks and Regards,
Ram.

Ramesh,
Few inputs for this project
1. You need to clearly seperate out the upgrate (5.0 to 7.0) and Migration (Classic to ECS) in your project planning to derisk the project i.e. you should have seperate testing cycle time/ efforts for upgrade and then on migration so that functional/ teachnical team working out in the project can clearly identifies issues between upgrade and migration seperately and work on them.
2. You have to work with business to make a decision on conversion of old classic PO's (incomplete GR/IR still required) and PO in process (SC created under approval in SRM). I strongly suggest you should not involve into conversion and keep it out of this project.
3. SRM do have option to take care of your tax configuration. BTW most of the company use external software to calculate tax amount.
4. You need to build workflow for PO in SRM since now PO will be created in SRM.
5. You need to create smartform / output determination in SRM for the PO. Please note SAP has provided some consulting notes if you continue to handle document transmission in backend with ECS.
6. Yes a distribution model needs to be setup for confirmation and Invoice if you are not doing it now in classic scenario.
Asset procurement solution you mentioned looks specific to your Org business needs, you need to explore to fit into new environment.
All the best
Thanks, Sachin
Edited by: sachindubey on Apr 10, 2010 12:13 PM

Need some clarification in the following programs

Hi ABAPers
I am learning ABAP programming. I am having some doubts in some programs which are there in the book TEACH YOURSELF ABAP/4 in 21 Days.
I hope you will clear all my doubts
1)     when I execute this program it is giving me error message and I am unable to resolve the error in it.
I dont remember the error message but it is something related to data conversion.
Listing 9.5 Variables Filled with Characters Other than Blanks or Zeros Using the WITH Addition of the CLEAR Statement
1 report ztx0905.
2 tables ztxlfa1.
3 data: f1(2) type c value 'AB',
4       f2(2) type c,
5       f3    type i value 12345,
6       begin of s1,
7           f1(3) type c value 'XYZ',
8           f2    type i value 123456,
9           end of s1.
10 write: / 'f1=''' no-gap, f1 no-gap, '''',
11        / 'f2=''' no-gap, f2 no-gap, '''',
12        / 'f3=''' no-gap, f3 no-gap, '''',
13        / 's1-f1=''' no-gap, s1-f1 no-gap, '''',
14        / 's1-f2=''' no-gap, s1-f2 no-gap, '''',
15        / 'ztxlfa1-lifnr=''' no-gap, ztxlfa1-lifnr no-gap, '''',
16        / 'ztxlfa1-land1=''' no-gap, ztxlfa1-land1 no-gap, '''',
17        /.
18 clear: f1 with 'X',
19        f2 with f1,
20        f3 with 3,
21        s1 with 'X',
22        ztxlfa1 with 0.
23 write: / 'f1=''' no-gap, f1 no-gap, '''',
24        / 'f2=''' no-gap, f2 no-gap, '''',
25        / 'f3=''' no-gap, f3 no-gap, '''',
26        / 's1-f1=''' no-gap, s1-f1 no-gap, '''',
27        / 's1-f2=''' no-gap, s1-f2 no-gap, '''',
28        / 'ztxlfa1-lifnr=''' no-gap, ztxlfa1-lifnr no-gap, '''',
29        / 'ztxlfa1-land1=''' no-gap, ztxlfa1-land1 no-gap, ''''.
according the book the output should be
The code in Listing 9.5 produces this output:
f1='AB'
f2=' '
f3='    12,345 '
s1-f1='XYZ'
s1-f2='   123,456 '
ztxlfa1-lifnr='          '
ztxlfa1-land1='   '
f1='XX'
f2='XX'
f3='50,529,027 '
s1-f1='XXX'
s1-f2='1482184792 '
ztxlfa1-lifnr='##########'
ztxlfa1-land1='###'
can you please explain me this program.
2)     This program is giving me the following error message at line 7.
ALPHA AND IT-F1 ARE TYPE- INCOMPATIBLE.
The program is as follows.
Listing 12.9 Deleting Rows from an Internal Table Can also be Done Using the delete Statement
1 report ztx1209.
2 data: begin of it occurs 12,
3            f1,
4            end of it,
5            alpha(12) value 'ABCDEFGHIJKL'.
6
7 do 12 times varying it-f1 from alpha0 next alpha1.
8      append it.
9      enddo.
10
11 loop at it.
12     write: / sy-tabix, it-f1.
13     endloop.
14
15 delete it index 5.
16 skip.
17 loop at it.
18     write: / sy-tabix, it-f1.
19     endloop.
20
21 delete it from 6 to 8.
22 skip.
23 loop at it.
24     write: / sy-tabix, it-f1.
25     endloop.
26
27 delete it where f1 between 'B' and 'D'.
28 skip.
29 loop at it.
30     write: / sy-tabix, it-f1.
31     endloop.
32
33 loop at it where f1 between 'E' and 'J'.
34     delete it.
35     endloop.
36
37 skip.
38 loop at it.
39     write: / sy-tabix, it-f1.
40     endloop.
41
42 read table it with key f1 = 'K' binary search.
43 write: /, / 'sy-subrc=', sy-subrc, 'sy-tabix=', sy-tabix, / ''.
44 if sy-subrc = 0.
45     delete it index sy-tabix.
46     endif.
47
48 skip.
49 loop at it.
50     write: / sy-tabix, it-f1.
51     endloop.
52
53 free it.
And the out put according to the book is as follows
The code in Listing 12.9 produces this output:
         1 A
         2 B
         3 C
         4 D
         5 E
         6 F
         7 G
         8 H
         9 I
        10 J
        11 K
        12 L
         1 A
         2 B
         3 C
         4 D
         5 F
         6 G
         7 H
         8 I
         9 J
        10 K
        11 L
         1 A
         2 B
         3 C
         4 D
         5 F
         6 J
         7 K
         8 L
         1 A
         2 F
         3 J
         4 K
         5 L
         1 A
         2 K
         3 L
sy-subrc=     0 sy-tabix=          2
         1 A
         2 L
How to rectify the error in this program.
3)     In this program I want to ask is there any way that I can be able to see the write statement output which is there in the initialization event block. If yes then how .
(Note I dont want to remove the paramter (selection screen) statement.)
Listing 18.13 Explain the Sequence of Events That Occurs in this Program
report ztx1813 no standard page heading.
ztx1813 data: flag,
      ctr type i.
parameters p1.
initialization.
flag = 'I'.
write: / 'in Initialization'.
start-of-selection.
flag = 'S'.
write: / 'in Start-Of-Selection',
         / 'p1 =', p1.
top-of-page.
   add 1 to ctr.
   write: / 'Top of page, flag =', flag, 'ctr =', ctr.
   uline.
4) can anybody please mail me some exercise program queries ( right from the basic to complex one) on this mail id [email protected] or else u can give me the url of the website which contains such program.
EARGERLY WAITING FOR UR REPLIES
Regards,
maqsood

Maqsood,
I had tested all your programs and I am getting the correct output. I didnt get any error message and I didnt do any changes. I just copied your code and executed it.
To your Q3, I can say...INITIALIZATION is used only to assign values to variables. It is not used for output.
Only the start-of-selection and top-of-page will be printed.

Could we have some clarification on the linear cha...

Who will be able to get them?
Can people without infinity get them and are we certain that an updated black box will be able to view them?

masona2 wrote:
If you want to go elsewhere, go elsewhere, you have no need to declare such on here. That is a matter for you and you alone.
And as for your declaration " I want to know specifically what will be required for those channels." Your not wanting to know, you are demanding to know. But BT never announce anything until such is ready. They never have and they never will. But if your not happy with that stance, the grass is always greener, eh?
I am beginning to wonder if BT know. That's what worries me.
By the way, you told me to start this thread so why complain when I do?

How can I make Skype Desktop the default for Call: links in MS Outlook?

How can I persuade MS Outlook to use Skype Desktop for Call: links (such as those for phone numbers in a Contact Card)? Right now it is using Skype for Business to open them (I have both Skype Desktop and Skype for Business - formerly Lync - installed) and I need to use Skype Desktop by default instead. Office 365 Business (15.0.4727.1003) on Windows 8.1 Pro x64, with Skype Desktop v 7.6.whatever the latest is. Advice very welcome!

How can I persuade MS Outlook to use Skype Desktop for Call: links (such as those for phone numbers in a Contact Card)? Right now it is using Skype for Business to open them (I have both Skype Desktop and Skype for Business - formerly Lync - installed) and I need to use Skype Desktop by default instead. Office 365 Business (15.0.4727.1003) on Windows 8.1 Pro x64, with Skype Desktop v 7.6.whatever the latest is. Advice very welcome!

When sharing a link from Firefox, the program automatically opens Internet Explorer and not Thunderbird. Can Thunderbird be made the default for sharing links from Firefox?

When sharing a link or page via email, either the webpage or Firefox will open up Internet Explorer to share the link or page. As I use Thunderbird for emailing, could Firefox open Thunderbird automatically instead of internet Explorer?

From Firefox, I click on "File' and then 'Email link'.
This results in a new Outlook message opening automatically, with the URL copied into the body of the message.
I then add my own text, see the screenshot image. That's where the formatting problems come in!
Cheers,
Michelle

How do I move the policy from Default domain policy to a custom policy.

I want to implement a new password policy. In the past we had a fairly loose policy, now I want to implement minimum length and complexity. I know how to set this up in Computer Config Policies windows settings security settings and account policies
password policy. However after I set it up I notice that it is not being applied. I have run gpupdate, and even waited several days but still it's not taking effect. I have created what im calling a custom gpo calling it "password policy".
It is situated under domains/mydomain.com . There are a number of other policies here.
When I run gpresult /h c:\temp\gpreport.html its all a bit confusing. It looks like it being applied but then further down it says under Group policies Applied GPOs Denied GPOs Pssword Policy mydomain.com empty. ??
But let me ask this first off .
The previous administrator I think has the password policy set up in the "default domain policy"
Is it possible that the default domain policy which IS indeed set differently is overriding my custom "password policy"
If this is so how can I make it so my custom password policy is applied over the default domain policy.
Or what other answers could it be.

Hi,
Based on your requirement you can create Fine Grained Password Policies.
This feature introduced in Windows Server 2008 allows you to override password policy set at the Default Domain Policy for specific users or groups.
Checkout the below link for creating Fine Grained Password Policies from GUI in Windows Server 2012,
http://blogs.technet.com/b/reference_point/archive/2013/04/12/fine-grained-password-policies-gui-in-windows-server-2012-adac.aspx
Regards,
Gopi
JiJi
Technologies

Itunes privacy policy will not let me accept the new version

Every single time I try to accept the updated privacy policy, the privacy policy acceptance screen just comes back. I can't update any apps or download new apps. Doese someone know what I should do?

I just noticed it happening for me as well. Quite frustrating. I try to update apps, it brings me to terms and conditions screen. I accept it with box checked, it says thank you. I click done, and it takes me to account information. I click done on account information, and it takes me back to account information. I try going back to app library and updating, and it takes me back to terms and conditons, then back to account information. It's like "Ground Hog Day." Help us.

What impact do changes to the CUCM "Default Credential Policy" have?

Hi all,
We have been asked to make an update to the 'Default Credential Policy' on CUCM 6.1. The update is easy enough to carry out: User Management > Credential Policy > Default Credential Policy.
However, Cisco documentation isn't too clear as to what accounts this will impact. As best i can tell any changes made here will impact any 'new' Application or SuperUser (etc) accounts that are created *after* the policy is updated. Existing application accounts won't get impacted and would require a Bulk Upload to change them. Does that sound correct?
I'm also a little unsure if changes to this policy will impact the 'administrator' account that we created when we installed CUCM, or any of the normal 'phone' user accounts that our many IP phone users have (i presume not, but again Cisco documentation doesn't seem too hot on precisely what gets impacted by changes to this policy).
Screenshot below of the GUI screen i am referring to.
Thoughts appreciated.
Many thanks!

Quick bump. We've read a few links that suggest User and Application User passwords etc would be impacted. However, they don't mention the main Administrator account, nor if we would need to use Bulk Upload to change existing User and Application User settings after chaning the Default Policy settings:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_1_2/ccmcfg/b08crpdf.html#wp1064073
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_1_1/ccmcfg/b08crpol.html#wp1030222
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_1_1/ccmcfg/b08crpdf.html#wp1055303
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a0080a57c4c.shtml
Ironically, a Google search for "CUCM Default Credential Policy" now lists this post as the fifth most significant one when trying those search terms doh!
Any thoughts appreciated.
Thanks

Office 2013 - Is there a way to when installing that you can change the default save location without having to configure it within the client?

So, What I am trying to do is deploy Office 2013 throughout our company, and I do not want the users to save their business or personal files created within Office 2013 on the C: drive or Sky Drive. We have what is called the U: drive and I'd like to know
if there's a quick registry tweak that I can use to not only change the default location upon setting up a computer, but to deploy through Group Policy?
One other question perhaps; Is there a way to change not only the file location to default to only the one place, but also is there a way to also set a specific size limit to folders and prevent certain files from being saved (videos and personal pictures).
I have our network pretty tight as to what or who can go where, and what not, I am just really for an answer or some help to the default location...anything you have GREATLY APPRECIATED!

You can use the OCT and/or domain Group Policy, to customise the Office experience and settings for your users:
https://technet.microsoft.com/en-us/library/ee460874.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Broken Default Domain Policy! GPOFIX Doesn't work

Justin1250 wrote:
So I noticed that command prompt is open in the users directory.
Did you right click on the command window and run as administrator?
It should run from the system directory as an admin.Yes I did. I just made sure again to run it as admin. Same result.

I've spent hours and hours trying to fix this but can't. I seem to have located the problem where the default domain policy has lost is child associated with the GUID in AD/Registry. None of the tools seem to work, and I can't delete and recreate it because it thinks it doesn't exist and because Microsoft has engineered it to not be removable. This would be fine if it wasn't corrupted. I've read on some forums that the in-ability to delete a policy object is due to permissions issues. However, that isn't the issue in my case.I've tried THISwhich didn't work.I recently did a test migration to 2012 from 2003, and was hoping when I migrated the data that the GPO wouldn't transfer it's corrupted data, but I was wrong :-/The pictures below should illustrate more detail than I could describe.GPOFIX ToolActive Directory showing that the GUID...
This topic first appeared in the Spiceworks Community

Seeking some clarification of the default Privacy policy link

Similar Messages

Maybe you are looking for