Select and print photos

Hi folks, I need to make a page with a gallery of photos, which can make photos to take them to another page with a button to print the selected photos.
Thank you for your help.

Hi
You can insert code using Object > Insert HTML for creating a button for print on page which would on click action open a pop-up for printing the page.
Create hyperlink to pages where you have inserted images and then place html  button on that page, using which users will be able to pint the page with image.
A simple print button can be created using the steps mentioned here :
http://www.htmlgoodies.com/beyond/javascript/article.php/3471121/Print-a-Web-Page-Using-Ja vaScript.htm
If you want to customize more , then check this one :
http://www.printfriendly.com/button
Additionally , as you have mentioned about selected images, first you would need to create checkboxes to select the images and then use the print button which should pick up the exact values defined through checkbox selection. This would require customization on your end as with native Muse we don't have any widget to achieve this.
Thanks,
Sanjit

Similar Messages

  • How do I print all responses as pdf without selecting and printing just one response at a time?

    How do I print all responses as pdf forms without selecting and printing just one response at a time?

    Sorry this is not supported at this time. You can only download the responses as PDF one at a time.
    You can export the response table and print the whole table but if you want to print each response individually you have to do it manually. Sorry.
    Gen

  • How to select and print calls only made and receiv...

    how to select and print out list of calls made and received for the past year, between myseld and one particular contact

    While I'm not sure about what you want to accomplish, I'll offer a couple of possible solutions.
    1. If the items that you want to remove are on the timeline, and those items are in layers that contain no content that you want to keep, then you can just select those layers and delete them.
    2. If you want to remove some items from the stage, but keep the original items for some later purpose, just copy the movie and then edit the copy as in item 1.
    3. If you need to remove some items from stage and then resize the stage to compensate for the loss of these items, then you may have to move and/or resize some of the items in your movie. This may be as simple as using the "edit multiple frames" selection in the timeline, or it may be much more time consuming.

  • Help with photoshop elements 8 mac and printing photos

    Here is my issue and I had the same problem with the trial aperture 3. My photos from iPhoto 9 print out nice glossy frame worthy pictures on my 4x6 photo paper. However PSE 8 prints out the same photo with poor quality and streaky lines. iPhoto print outs seem to take almost a minute to print out, and PSE photos take like 20 sec so Its not making second pass or perhaps it doesn't know its printing to glossy photo paper?
    Its not the printer since I am getting awesome photos from iPhoto 9, anyone have similiar issues like this.
    Other then printing I'm very impressed with PSE 8 for the mac.
    Thank you
    Matt

    Thank you Barbara, that was it. Printing out great photos from PSE now.

  • Using Aperture 3 and printing photos, is it best to export the photo CMYK as a TIFF?

    Using Aperture 3 and CMYK when printing photos, is it best to export as a TIFF and if so as bit 8 or bit 16? Thanks!

    Yes.  16-bit TIFF.
    See Léonie's answer here.

  • Can't select and print multiple files from Mac OS' Finder

    I'm using Acrobat Reader on Mac OSX. I'm used to be able to select multiple files in Finder and then press Apple-P to print all of them in one batch. Reader blocks this, by opening the first of the documents and then display the Print Setup dialogue, instead of just printing the document according to the default settings.
    When the dialogue is displayed, the reader is blocked from opening and printing the remaining documents, and just displays an error message that it couldn't open them. That is not a nice behaviour.

    Hi Mikael,
    It is not possible to open another document while printing another document through Acrobat.
    You might want to create an action in Acrobat to print all the pdf's in a particular folder.
    Regards,
    Rave

  • Monitor and printing photos.

    hi you all,
    i am a amateur photographer, and i have been encontering a problem for years now...hehehe
    i work with my photos on photoshop, but every time i print them, they look away darker than it did on screen. i know that it is normal to some level, but the thing is...when i do the ajustments on my apple screen they feel corretc. when i go to my husband pc, they are really darker than on my. i would like to know if this is a problem of calibration(i calibrated today, but didnt help), or something i should be working on photoshop, please sommeone helpp me.
    here, i invite you to see my pictures, so you can have an idea. and please tell me if they look dark also...or just give me a solution.
    www.flickr.com/photos/cosmica

    when printing, try selecting 'let photoshop determine colours' and also 'let printer determine colours'
    also, when printing, ensure the file is in CYMK and NOT RGB.
    hope this helps,
    daniel

  • Settings for  Canon EOS 450, Adobe Camera RAW, PS CS 5 and printing photos

    I have a Canon CS EOS  450, have used PS CS5 in the past. I have now been made aware of Camera RAW and have started using it. My problem is that the images varies when I open the photos in different programs. My laptop is a HP Probook, 64 bit, Windows 7, etc.
    So, my question is about settings on the different devices; Camera and programs:
    1. I shoot in RAW, so I believe no change in camera settings.
    2. Adobe CR- I use white balance, contrast,  clarity, and vibrance. Any programme changes on ACR programme necessary (ie colour, etc in the programme  to match with my screen?))
    3. Biggest difference between moving from ACR to PS CS5- usually a big difference between these two (colour; sharpness)
    4. And what would be the best proramme to watch the photos that will look as close to what I will get if I print these in photos?

    You should read up on color management.  It's relatively complex, and is difficult to teach in a forum thread.
    Your raw conversions are (if you haven't changed the defaults) being converted to the Adobe RGB 1998 color space.
    I suspect you'll see some initial improvement in consistency by doing the following:
    Open a raw image to get the Camera Raw dialog.
    Click the little link at the bottom center.
    Change the Adobe RGB default color space to sRGB.
    Complete the opening of the file.
    This will set the color space for further conversions to sRGB, which is likely going to seem more consistent when you open the images in your other apps.
    After you learn more about color management, and you understand how the parts interact and what additional steps you'll need to consider, you may well want to change this setting back, or even go so far as to change it to ProPhoto RGB, which has the largest gamut.
    -Noel

  • Selecting and Printing Labels from Database

    I have tried to print address labels from a database in which I chose four lines, one of which (a company name) is often blank because there is no information. This line appears as a blank line on the label. Is there a way to eliminate this blank line?
    I am also having trouble selecting records to print. Can you suggest where to look to get help?
    Thank you.

    Hello
    Here is a script I passed last year about this kind of problem.
    I hope that embedded comments would be sufficient because at this time, I am unable to work on such a script.
    --[SCRIPT DB calcToSlideGUI v6]
    Ce script récupère dans un champ une valeur calculée
    et la dépose dans un champ texte classique.
    Cela permet de bénéficier du retour à la ligne automatique
    indisponible pour les champs calculés.
    Si un champ contient des pseudo returns consécutifs,
    ils sont remplacés par un unique pseudo return.
    Si un champ contient des pseudo espaces consécutifs,
    ils sont remplacés par un unique espace.
    La fonction Chercher-Remplacer est utilisée
    pour remplacer ces pseudo return par de VRAIS return.
    Exemple de formule pour concat-calc
    'prénom'&"◊"&'prénom2'&"◊"'nom'&"¶"&'rue1'&"¶"&'rue2'&"¶"&'code'&" "&'city
    • This script grab the value calculated in a field
    and drop it in a simple text field.
    This permit to take benefit of the auto wrap feature
    which is unavailable with calculated fields.
    If a field contains adjacent pseudo returns,
    they are replaced by single ones.
    If a field contains adjacent pseudo spaces,
    they are replaced by a single space.
    The Find-Replace feature is used to replace
    these pseudo returns by TRUE ones.
    Sample formula for concat-calc:
    'firstName'&"◊"&'firstName2'&"◊"&'lastName'&"¶"&'street1'&"¶"&'street2'&"¶"&'co de'&" "&'city'
    Yvan KOENIG, Vallauris (FRANCE)
    27 août 2004
    complété le 31 août
    modifié le 5 décembre
    modifié le 8 décembre
    modifié le 4 février 2005
    property champsRequis : {"concat-calc", "concat-text"}
    (* les noms des deux rubriques manipulées
    vous pouvez modifier ces noms mais PAS leur ordre
    • the names of the two used fields
    you may change them but don’t change the order of them *)
    property french : true (* true = messages français
    • false = english messages *)
    property fauxReturn : ASCII character 166 -- "¶"
    (* use it in the database formula as Return indicator *)
    property fauxEspace : ASCII character 215 -- "◊"
    (* use it in the database formula as Space indicator *)
    property fauxReturn2 : fauxReturn & fauxReturn
    property fauxEspace2 : fauxEspace & fauxEspace
    property msg0 : "" -- globale
    property msg1 : "" -- globale
    property msg2 : "" -- globale
    property msg4 : "" -- globale
    property msg6 : "" -- globale
    property msg7 : "" -- globale
    property msg71 : "" -- globale
    property msg72 : "" -- globale
    property msg81 : "" -- globale
    property msg82 : "" -- globale
    property msg98 : "" -- globale
    property msg99 : "" -- globale
    on run
    try
    if msg0 is "" then my prepareMessages()
    my controlesDivers()
    my modeUtilisation()
    my afficheToutes()
    my preparation()
    set metsReturn to my alimente()
    my pourRemplacer(metsReturn)
    on error MsgErr number NroErr
    if NroErr is not -128 then
    beep 2
    (* «constant afdregfp» est la forme canonique de frontmost application *)
    -- tell application (path to «constant afdregfp» as string)
    tell application (path to frontmost application as string)
    display dialog "" & NroErr & " : " & MsgErr ¬
    buttons {msg99} with icon 0
    end tell -- to application
    end if
    return
    end try
    end run
    -- ================== routines
    on controlesDivers()
    tell application "AppleWorks 6"
    activate
    -- Test version
    if "6." is not in (version as text) then ¬
    error msg0 number 8000
    if (count each document) = 0 then ¬
    error msg1 number 8001
    if (document kind of document 1 ¬
    is not database document) then ¬
    error msg2 number 8002
    select document 1 (* Utile si dialog recherche est au 1er plan
    • Useful if the Search dialog is at front *)
    end tell -- AppleWorks
    end controlesDivers
    -- ==================
    on modeUtilisation()
    tell application "AppleWorks 6"
    tell document 1
    select menu item 1 of menu 5 (* mode Utilisation¬
    • Browse mode *)
    end tell -- to document 1
    end tell -- to AppleWorks
    end modeUtilisation
    -- ==================
    on afficheToutes()
    tell application "AppleWorks 6"
    tell document 1
    select menu item 1 of menu 6 (* Afficher toutes les fiches
    • Show all records *)
    end tell -- to document 1
    end tell -- to AppleWorks
    end afficheToutes
    -- =====================
    on preparation()
    tell application "AppleWorks 6"
    tell document 1
    if (count of records) = 0 then error msg6 number 8006
    set nomsChamps to name of every field
    set {missing, msg8} to {0, ""}
    set cnt_champsRequis to count of champsRequis
    repeat with ky from 1 to cnt_champsRequis
    set Rbrq to (item ky of champsRequis)
    if Rbrq is not in nomsChamps then
    set missing to missing + 1
    set msg8 to msg8 & Rbrq & ", "
    (* construit une chaîne avec les noms des rubriques absentes
    • build a string with the names of missing field(s) *)
    end if
    end repeat
    if missing is not 0 then
    (* prépare un beau message d'erreur
    • build a pretty error message *)
    if missing = 1 then
    set msgmiss to msg7 & msg71 & return & ¬
    msg8 & msg81
    else
    set msgmiss to msg7 & msg72 & return & ¬
    msg8 & msg82 -- pluriels
    end if -- missing = 1
    error msgmiss number 8078
    end if -- missing is not 0
    end tell -- to document 1
    end tell -- to AppleWorks
    end preparation
    -- =====================
    on alimente()
    tell application "AppleWorks 6"
    tell document 1
    set {champSource, champDestination} to champsRequis
    set metsReturn to false
    set nbrec to count of records
    repeat with ky from 1 to nbrec
    set {champky, mets_Return} to ¬
    my slide((value of field champSource of record ky) as text, metsReturn)
    set value of field champDestination of record ky to champky
    end repeat
    end tell -- document 1
    end tell -- Aworks
    return mets_Return
    end alimente
    -- =====================
    on remplace(Texte, avant, apres)
    set AppleScript's text item delimiters to avant
    set aListe to (text items of Texte)
    set AppleScript's text item delimiters to apres
    return (aListe as text)
    end remplace
    -- =====================
    on slide(Texte, mets_Return)
    repeat while Texte contains fauxReturn2
    set Texte to my remplace(Texte, fauxReturn2, fauxReturn)
    end repeat
    repeat while Texte contains fauxEspace2
    set Texte to my remplace(Texte, fauxEspace2, fauxEspace)
    end repeat
    if Texte contains fauxEspace then ¬
    set Texte to my remplace(Texte, fauxEspace, " ")
    set AppleScript's text item delimiters to ""
    if Texte contains fauxReturn then set mets_Return to true
    return {Texte, mets_Return}
    end slide
    -- =====================
    on pourRemplacer(metsReturn)
    if my quelOS() is not less than "1030" then
    (* Mac OS X 10.3 ou plus *)
    if metsReturn is true then ¬
    my chercheRemplaceGUI(fauxReturn, return)
    else
    error msg4 number 8004
    end if -- my quelOS() (GUIdispo)
    end pourRemplacer
    -- ==================
    on chercheRemplaceGUI(avant_, apres_)
    beep 2 (* Attire l'attention *)
    tell application "AppleWorks 6"
    --activate
    select document 1
    tell document 1
    select menu item 1 of menu item 16 of menu 3 (* Rechercher/Remplacer…
    • Find/Replace… *)
    end tell
    set the clipboard to avant_
    paste
    end tell -- to AppleWorks
    tell application "System Events"
    if UI elements enabled then
    tell process "AppleWorks 6"
    keystroke tab
    end tell -- to process
    else
    tell application "System Preferences"
    activate
    set current pane to ¬
    pane "com.apple.preference.universalaccess"
    display dialog msg98
    end tell -- to System Preferences
    end if
    end tell -- to System Events
    tell application "AppleWorks 6"
    set the clipboard to apres_
    paste
    end tell
    tell application "System Events"
    tell process "AppleWorks 6"
    keystroke tab -- back to field "Search"
    end tell -- to process
    end tell -- to System Events
    end chercheRemplaceGUI
    -- =====================
    on quelOS()
    try
    (* «event fndrgstl» = forme canonique de system attribute *)
    -- set hexData to «event fndrgstl» "sysv"
    set hexData to system attribute "sysv"
    set hexString to {}
    repeat 4 times
    set hexString to ((hexData mod 16) as string) & hexString
    set hexData to hexData div 16
    end repeat
    set OS_version to hexString as string
    on error
    set OS_version to "0000"
    (* retournera "0000" si "system attribute" n'est pas reconnu *)
    end try
    return OS_version
    end quelOS
    -- =====================
    on prepareMessages()
    if french is true then
    set msg0 to "Ce script n'est pas compatible" & return & ¬
    "avec cette version d‘AppleWorks." & return & ¬
    "Veuillez utiliser une version 6.0" & return & ¬
    "ou plus récente..."
    set msg1 to "Aucun document ouvert"
    set msg2 to "Ce document n'est pas une base de données."
    set msg4 to "Pensez à remplacer" & return & ¬
    "«" & fauxReturn & "» par «\\p»."
    set msg6 to "Impossible d’exécuter ce script" & return & ¬
    "sur une base vide."
    set msg7 to "Désolé, "
    set msg71 to "la rubrique:"
    set msg72 to "les rubriques:"
    set msg81 to "est absente."
    set msg82 to "sont absentes."
    set msg98 to "Le scriptage des éléments d’interface est désactivé. " & ¬
    "Cochez «Activez l’accès pour les périphériques d’aide»"
    set msg99 to " Vu "
    else
    set msg0 to "This script is not compatible" & return & ¬
    "with this version of AppleWorks." & return & ¬
    "Please use version 6.0" & return & "or higher..."
    set msg1 to "No open doc"
    set msg2 to "This document is not a database."
    set msg4 to "CAUTION, don’t forget to replace" & ¬
    "“" & fauxReturn & "” by “\\p."
    set msg6 to "Can’t apply this script" & return & ¬
    "on an empty DB."
    set msg7 to "Oops, the field"
    set msg71 to ":"
    set msg72 to "s:"
    set msg81 to "is missing."
    set msg82 to "are missing."
    set msg98 to "UI element scripting is not enabled. " & ¬
    "Check “Enable access for assistive devices”"
    set msg99 to " Oops "
    end if
    end prepareMessages
    --[/SCRIPT]
    Yvan KOENIG (from FRANCE jeudi 15 juin 2006 09:07:25)

  • I want to print. 'selection' and' print frames' are greyed out.

    I want to print info on a page. 'selection' & 'print frames' are greyed out.
    == This happened ==
    Every time Firefox opened
    == forever

    Hi,
    My dad told me he had this 'no selection' problem when he wanted to print out a selection in Hotmail, so I had a hunt around, but didn't find a definitive solution.
    So, I have done some playing around, and have come up with this solution which works if you want to print out a selection in Hotmail (using firefox), but it is now greyed out.
    It seems to be connected with the way that Hotmail handles frames.
    (Thought I would post it as posts like this have helped me a ton in the past :0))
    '''To print a selection in hotmail you need to do this.'''
    1/ On the email you want to print click the small Printer icon in the hotmail menu.
    There is no need to highlight a selection at this stage because the email is in a frame, so it will do no good anyway.
    2/ A new page will open up and the printer dialog box will open up.
    Close the printer dialog box.
    3/ Highlight the text selection that you want to print on that page.
    4/ Press Ctrl-P on the keyboard.
    5/ The printer dialog box will now pop up again and you will be able to choose 'Selection'
    Your selection will now print.

  • Problem selecting and deselecting photos

    My mind is confused.  Last night I was carefully selecting photos from about 900 in the browse view.  I held down the command key continually and then left clicked one image I wanted after another.  Sometimes after chosing 45 images, sometimes after only 10, Aperture 3 would on its own start all over.  The count at the bottom of the view would reset to 1.  All the images I had just selected were deselected.  I did this seveal times, always being very careful to click only in the images and no where else.  The thumbnails were large, so accuracy was not an issue.  I would scroll down using the wheel, always holding down the command key.  It seemed to have a mind of its own.  i'm well familiar with the Finder interface, so it wasn't me being clunky.  I repeated this behavior a number of times...baffling behavior.  Besides Aperture 3 being beastly slow on my imac, this was extremely irritating and buggy.  Am I the only one who has experienced?  What say you Apple?  Thank you collective.

    Thanks Mark, but you answered what I already included within my question. I wrote "So it's that, or disabling the hyperlink, move the object normally, and putting the hyperlink on again"
    With that, to "Uncheck the "Make hyperlinks active" you need to first select the object, and you end up back to the first and second problem I wrote.

  • Importing and printing photos in Appleworks

    If I drag a picture from iPhoto into an AppleWorks document, and then print it, the photo comes out in reduced resolution. (This doesn't occur if I drag the photo into a Word document. In Word, the resolution is the same as I would get when directly printing from iPhoto.)
    AppleCare Technical Support can't suggest a solution. Can anyone help? I am using AppleWorks version 6.2.9.
    iMac G5   Mac OS X (10.4.8)  

    Welcome to Apple Discussions Stephen
    There are two issues at work here. First, AppleWorks
    changes the resolution of any graphic format except
    PICT to 72 dpi. The best solution to this problem is
    to save the image as PICT before inserting into
    AppleWorks. My favorite for this is Graph
    icConverter, but you can use Preview or
    Photoshop Elements or any other application that can
    save as PICT.
    For the second issue, this is a problem than became
    more noticeable with AppleWorks 6.2.9 & has something
    to do with postscript printing. Go to Preferences >
    General > Topic: Text & turn Fractional Character
    Widths on.
    I can insert complete photos with no problem if I open them up in PictureViewer (OS 9) and copy and paste from there into Appleworks. PictureViewer seems to deal with the images in a different manner than Premiere.
    HOWEVER recently I wanted to take four images from Photoshop (where I trimmed around them) and import them into Appleworks where I could collage them together. The pictures import and will print without problem if I do not resize them. Re-sizing the images cause pixelation around the edges when printing. The pixelation is not visible on the computer screen. The pictures were imported into Photoshop originally at 72 dpi.
    Is there any way to copy an image (not a complete photo file, i.e., PICT) from Photoshop and import it successfully as a graphic?
    On the other hand, is there an earlier version of Appleworks that works more efficiently with images?
    G5 iMac 20" 2GB RAM   Mac OS X (10.4.2)  

  • Print Selection and Print Queue?

    Hey guys,
    I have a couple questions. From time to time, I want do print selection because I do not like copy it and pasting it into textedit or something. Is there a way I could do this without leaving safari? Also, when I print I usually have to close the print queue manually once the document is done. In tiger, the queue used to automatically close once the document was done transmitting to the printer. Is there a way I could have the queue to automatically once something is done printing?

    The 1.1 Update does not work with Leopard...all that happens is the text area goes Gray, and then nothing. It is supposed to work...
    It is ridiculous that Apple refuses to implement a simple "Print Selection" option in the Print Box. As usual, Apple has the most advanced stuff, except for the basics. Leopard is awesome, but come on now.

  • Aperture 2 and printing photos top & bottom margins

    Hello,
    Is it me or does Aperture 2 (Trial) missing the top & margin settings when printing a photo ?
    What I mean is if it's possible to move the photo around vertically (top or bottom) and by seeing
    the dimension...like in Lightroom.
    Ok, there are possibilites to decenter photos in 'Books' mode but I didn't find a ruler (neither for the dimensions of the photos and neither for the whole page) and that's not very practical.
    Thanks,
    gilles

    I don't know specifically about any improvements regarding keywords from Aperture 1.5 to 2.0 but in Aperture 2.1 you are able to add and search hierarchical keywords structures.
    One very important thing to know is that you ALWAYS have to add keywords to the hierarchical keyword structure in the keyword HUD BEFORE you apply them to your specific images.
    Aperture is actually smart enough to distinguish between the same word used in different places in your keyword hierarchy. Here is an example. Let us say that you have created the following keyword hierarchy in your keyword HUD:
    /Wildlife/Bird/Duck/Male
    /Wildlife/Bird/Duck/Female
    /Wildlife/Kangaroo/Male
    /Wildlife/Kangaroo/Female
    If you do a simple text search by typing the search word into the search field then:
    If you search for "Wildlife" all your male and female ducks and kangaroos will show up.
    If you search for "Bird" your male and female ducks will show up.
    If you search for "Male" your male ducks and male kangaroos will show up.
    But if you are looking for only your male ducks then you just open the keyword brick in the search HUD and here you will see that there are actually two different "Male" keywords. Just next to those two keywords the upper hierarchy keyword is listed in parentheses. You just check the one you want.
    Again in order for this hierarchy structure to work then you must add new keywords in the keyword HUD before you add them to your images. All keywords you add to your images by typing directly into the keyword field in the metadata viewer will appear at the top level of your keyword hierarchy.
    Karsten

  • HT2486 I have 1100 contact and am trying to select and print only 300 for x-mas card labels - How do I do that?

    I have 1100 contacts in my Apple Contact application database.  I am trying to select only 300 for x-mas card labels and I don't know how to do that - any suggestions

    Hello TSCTCS,
    It sounds like you would like to print labels for 300 of your contacts. I would recommend creating a group, then adding the contacts to the group as you come across them with this article:
    Contacts (Mavericks): Group contacts
    http://support.apple.com/kb/PH15075
    Create a group or folder
    Select an account.
    Click Add (+), then choose New Group.You can also select contacts, then choose File > New Group From Selection.
    Create subgroups or subfolders by dragging a group or folder to another group or folder.
    Add contacts to a group or folder
    Select one or more contacts and drag them to a group or folder.
    Contacts in an Exchange account can belong to only one folder at a time. Any contacts not in a created folder are in the default Exchange Contacts folder.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

Maybe you are looking for