Select between clips not working

I toggled something and am not sure what I did. I have been selecting between clips all day long, and command-T to add cross dissolve. Now I don't get the hourglassed shaped cursor to indicate that it is selecting (i.e. I cant select the line between two adjacent clips. If I copy to a new timeline it works. What did I toggle?

Hi:
Stupid question:
Did you try saving your work, quitting and restarting FCP?
Thanks

Similar Messages

Select() function is not working properly in solaris 10.

Hi ,
We are facing an issue with select() in Solaris 10. we had written a sample program to this issue.
Program name :- sel.cpp
int main()
struct timeval sleeptime;
sleeptime.tv_sec = 60;
printf("1\n");
select(0,NULL,NULL,NULL,&sleeptime);
printf("2");
return 0;
When i run this program in Solaris 9, its printing 1 and after one minute its printing 2.
When i run this program on Solaris 10, its printing 1 and 2 without waiting for 60 seconds.
When i tried to print tv_usec, its printing as 0 in solaris 9 and some garbage values in solaris 10.
I think because of that the above select function is not working properly in solaris 10.
Why the tv_usec is not taking 0 as default values in Solaris 10?
We are using our legacy code for past 20 years. So, before going to do any changes we are trying to find why this happenig like this.
Thanks a lot.
Regards,
Srikanth.

haisrig wrote:
Hi ,
We are facing an issue with select() in Solaris 10. we had written a sample program to this issue.
Program name :- sel.cpp
int main()
struct timeval sleeptime;
sleeptime.tv_sec = 60;
printf("1\n");
select(0,NULL,NULL,NULL,&sleeptime);
printf("2");
return 0;
When i run this program in Solaris 9, its printing 1 and after one minute its printing 2.
When i run this program on Solaris 10, its printing 1 and 2 without waiting for 60 seconds.
When i tried to print tv_usec, its printing as 0 in solaris 9 and some garbage values in solaris 10.
I think because of that the above select function is not working properly in solaris 10.
Why the tv_usec is not taking 0 as default values in Solaris 10?
We are using our legacy code for past 20 years. So, before going to do any changes we are trying to find why this happenig like this.Hi
It sounds to me that you've been lucky for 20 years then.
Local POD variables on the stack that aren't explicitly initialized can contain any value. Here's what I see in your app with dbx
(dbx) run
Running: sel
stopped in main at line 9 in file "sel.cpp"
    9      sleeptime.tv_sec = 60;
(dbx) print sleeptime
sleeptime = {
    tv_sec = -4198732
    tv_usec = 0
}That's on a Solaris 10 SPARC machine. If I try it on a Solaris 10 x86 box then I get
(dbx) print sleeptime
sleeptime = {
tv_sec = -830490588
tv_usec = 134510556
and I see the behaviour that you describe.
Paul

Select query is not working in BDC Program

Hi,
I am working in BDC for update valuation class for T-code mm01.Actually In this BDC i am using two recoding based on material type.
i am using two internal table : I_DATA and ITAB
Use I_DATA to hold excle data in which material No, plant , valuation type , valuation No. and ITAB for material No, material type Only.
So, i am fetching material Type ( MARA-MTART ) through select query. But Select query is not working. and also i did check MARA table according that Material Number then material no. exit in Mara Table.
Note : at run time I_DATA have 1 row but ITAB have 0 row ....
DATA: BEGIN OF I_DATA OCCURS 0,
MATNR TYPE MARA-MATNR,
WERKS TYPE MARC-WERKS,
BWTAR TYPE RMMG1-BWTAR,
VERPR TYPE BMMH1-VERPR,
BKLAS TYPE MBEW-BKLAS,
STATUS TYPE C,
END OF I_DATA.
DATA : BEGIN OF ITAB OCCURS 0,
MATNR LIKE MARA-MATNR,
MTART LIKE MARA-MTART,
END OF ITAB.
Loop at I_DATA.
select matnr mtart from mara into table itab where matnr = I_DATA-matnr.
endloop.
Guide me..........

If you use your
Loop at I_DATA.
select matnr mtart from mara into table itab
    where matnr = I_DATA-matnr.
endloop.
At end of loop, itab will only contain the result of the last select, so use a
Loop at I_DATA.
select matnr mtart from mara APPENDING table itab
    where matnr = I_DATA-matnr.
endloop.
better
if I_DATA[] is not initial.
select matnr mtart from mara into table itab
    FOR ALL ENTRIES IN i_data where matnr = i_data-matnr.
endif.
Some Remarks
- If actually required (where does I_DATA come from, is it an external format, you need the internal value to use in SELECT statement), check via SE11 the correct [conversion exit|http://help.sap.com/saphelp_nw04/helpdata/en/35/26b217afab52b9e10000009b38f974/content.htm] associated with domain MATNR (Is it truly ALPHA, and not something like MATN1, so [CONVERSION_EXIT_MATN1_INPUT|http://www.sdn.sap.com/irj/scn/advancedsearch?query=conversion_exit_matn1_input])
- You could try to use BAPI like [BAPI_MATERIAL_SAVEDATA|http://www.sdn.sap.com/irj/scn/advancedsearch?query=bapi_material_savedata] and not BDC
Regards,
Raymond

Extension in Select-Options is not working

Hi,
The extension of select-options is not working for the following statement........
SELECTION-SCREEN: BEGIN OF BLOCK sel WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_tp_no FOR e070-trkorr.
SELECTION-SCREEN: END OF BLOCK sel.
Please Help.......
Thanks,
Sheel

SELECTION-SCREEN: BEGIN OF BLOCK sel WITH FRAME TITLE text-001.
SELECTION-SCREEN: END OF BLOCK sel.
Remove the colan ':' from ur code after SELECTION-SCREEN
write it as
SELECTION-SCREEN BEGIN OF BLOCK sel WITH FRAME TITLE text-001.
SELECTION-SCREEN END OF BLOCK sel.

Select button will not work

My 2gb nano's select button will suddenly not work. The rest of the clickwheel and buttons work find, but not the center select button.
I restored it to original settings. Then after it restarts, you have to select a language. The select button would still not work, but then I slid the "hold" button back and forth and the select button worked to allow me to chose a language. But at the next screen of options (Music/Photos/Extras, etc.) the select button will again not work. Sliding the hold button back and forth doesn't work. I cannot do a menu+select reset because I can't get the select button to respond.
I have made sure that I have the most updated softward for the nano.
Any suggestions?

My select button has not worked for a loong time.. It will occasionally work if I press for long enough or hard enough.. but not very often. This seems to be a common enough problem so there should be a way to fix it..I hope..

Why select query is not working?

CREATE OR REPLACE TYPE prod_type AS OBJECT (
pid INT,
pprice NUMBER,
MEMBER PROCEDURE display(pid IN NUMBER));
create table prod of prod_type (pid primary key);
CREATE OR REPLACE TYPE deal_type UNDER prod_type (
ctr NUMBER,
OVERRIDING MEMBER PROCEDURE display (pid IN NUMBER),
insert into prod values(deal_type(101, 4, 1));
insert into prod values(deal_type(102, 5, 0));
------below given select query is NOT WORKING ---------
select ctr from prod p where p.pid=101;
Thanks,
-Nid

------below given select query is NOT WORKINGWondering how you inserted data ...
SQL> CREATE OR REPLACE TYPE prod_type AS OBJECT (
2 pid INT,
3 pprice NUMBER,
4 MEMBER PROCEDURE display(pid IN NUMBER));
5 /
Type created.
SQL>
SQL> create table prod of prod_type (pid primary key);
Table created.
SQL>
SQL> CREATE OR REPLACE TYPE deal_type UNDER prod_type (
2 ctr NUMBER,
3 OVERRIDING MEMBER PROCEDURE display (pid IN NUMBER),
4 );
5 /
Warning: Type created with compilation errors.
SQL> sho err
Errors for TYPE DEAL_TYPE:
LINE/COL ERROR
4/1      PLS-00103: Encountered the symbol ")" when expecting one of the
         following:
         , not pragma <an identifier>
         <a double-quoted delimited-identifier> final instantiable
         current order overriding static member constructor map
SQL> CREATE OR REPLACE TYPE deal_type UNDER prod_type (
2 ctr NUMBER,
3 OVERRIDING MEMBER PROCEDURE display (pid IN NUMBER));
4 /
Warning: Type created with compilation errors.
SQL> sho err
Errors for TYPE DEAL_TYPE:
LINE/COL ERROR
1/1      PLS-00590: attempting to create a subtype UNDER a FINAL type
SQL>You made an attempt to create a subtype UNDER a FINAL type - that the reason why can not work ...
Avoid deriving a subtype from this FINAL type.
HTH

Select list pagination not working for big tables

Hi,
i am trying to view a table with large amount of data using tabular form. the pagination using select list is not working in this page. i have selected select list kind of pagination but it is showing "row range 1-15 16-30(with set pagination)' type of pagination. when i lowered the amount of data in the table the pagination type will automatically change to select list pagination. could you please tell me why this happens and any possible work around if any.
Thanks,
Jo

Hi Jo,
I don't know what you call a large amount of records, but the effect you describe might be intentional by apex.
The select list pagination would generate a selection tag with (number of records in table/15) options in your page HTML.
Although there isn't a hard limit to the number of options a select list can have there certainly is a limit to what your browser/pc can render.
Think about it
Let's say you table contains a million rows. this would result to a select list with 66666 options. Which your browser won't handle :)
I very possible the apex team resolved this by simply reverting to row range pagination when the number of select options would grow to large.
Geert

SELECT DISTINCT does not work - Another Problem!

Dear All
Previous Post
I just posted a thread, which has been answered by an expert. It's here:
SELECT DISTINCT does not work. Why?
My original problem was that the Query returned duplicate records, and SELECT DISTINCT did not work.
The solution was to change this select:
T0.[U_SupInv]      AS 'Link'
... to this:
CAST(T0.[U_SupInv] as nvarchar(100))      AS 'Link'
The amended Query worked.
New Problem
I just discovered that resolving the problem created a new one.
The field U_SupInv (Link) is in fact a UDF.
I created it so that all Suppliers' Invoices could be Scanned to pdf files, and these pdf could be linked
to the respective AP Invoice.
Originally, when I clicked 'Link' in my Query results, the pdf scan pops up.
When the Query is amended by adding CAST, the link becomes dead.
Help
Could anyone tell me how I can make SELECT DISTINCT work, as well keeping the LINKS live?
The main purpose of my Query is to help users view the pdf scans by clicking on the links.
Thanks
Leon Lai
Here's my Original Query
SELECT
T0.[UpdateDate] AS 'Update Dt',
T0.[TaxDate] AS 'Doc Dt',
CASE T5.[TransType]
     WHEN '18' THEN 'PU ' + CONVERT(VARCHAR(6), T0.[DocNum])
     WHEN '19' THEN 'PC ' + CONVERT(VARCHAR(6), T0.[DocNum])
END 'SAP Ref.',
T1.[ImportLog]     AS 'Ship #',
T0.[CardCode] + '' AS 'Supplier #',
T0.[CardName]      AS 'Supplier Name',
T0.[DocTotal]      AS 'Rs',
T1.[BlockNum]      AS 'Reqn #',
T0.[DocNum]        AS 'Doc No',
T0.[U_SupInv]      AS 'Link'
FROM klship.[dbo].[OPCH] T0
INNER JOIN klship.[dbo].[PCH1] T1 ON T0.[DocEntry] = T1.[DocEntry]
INNER JOIN klship.[dbo].[OJDT] T5 ON T0.[TransID] = T5.[TransID]
WHERE
(T0.[UpdateDate] >= '[%2]' AND
T0.[UpdateDate] <= '[%3]' AND
T0.[U_SupInv] IS NULL)
OR
(T0.[UpdateDate] >= '[%4]' AND
T0.[UpdateDate] <= '[%5]' AND
T0.[U_SupInv] IS NOT NULL)
FOR BROWSE

Dear István Korös,
Thanks a lot for your answer.
I will test your suggestion tomorrow, as it's night and I am returning home now.
However, I do not think it will suit my requirements for the foll reasons:
- I worked hard to get rid of the need to enter anything in the @Scan2 field.
- This UDF was created solely as a text of instruction for my staff.
   Unfortunately I had to fill in something to make the Query work.
- The problem is that if the user forgets to click the drop-down arrow and leaves @Scan2
   blank, the query does not work.
- With the help of another expert, I succeeded in ignoring @Scan2 altogether.
- I posted only a simplified version of my Query on the forum, without the codes relating to eliminating the
need to enter something in @Scan2, so you may not be aware of my requirement.
- I hope you understand my reluctance. But I will try your suggestion nevertheless.
My Suggestion
I think using PCH1.VISORDER may be the solution.
If we select only those rows where visorder = 0, then
   - there will be no duplication
   - I need not use SELECT DISTINCT
   - All my LINKS to pdf files will be live because I need not use CAST
   - I may retain that part of my Query which permits ignoring @Scan2 altogether.
- A Dream!-
The problem is that I don't know how and where to place that VISORDER.
If you think I may be right, could you help me along that line?
Best Regards
Leon Lai

Multi-select LOV does not work in forms

the multi select LOV does not work in the form.
the LOV works individually but in the form it does not work. it does not allow multiple selection from the list.
is there a workaround for this or is this a bug ...?
any ideas ...?
thanx a lot.
null

Right, we cannot store more than one value in a single column in a table :), we were getting a lot of requests to support multiple select LOVs but requirements were contradictory if not mutually exclusive.
The only sense it makes is when used together with user-defined object types (nested tables for example) but the current [application building]infrastructure we have does not support this. However, we are looking into this and this feature maybe implemented in a future release.

Double click select all does not work in web site's search area after going back.

After updating from Firefox ESR v24.8.1 to v31.20 double click select all does not work in a search area after going back or searching again with the same input. It happens before clicking search icon and searching for something else double click select all does not work except it works for one word that's all.
This issue is with all new Firefox ESR and None ESR I have tried. Also the issue is on all web sites like www.softpedia.com for example.

Bugzilla has a different login system, unfortunately.

"Select Color Range" not working. "Warning: No pixels were selected" returned when attempting to use. Using Photoshop CS6 on a Mac running OS X Yosemite

"Select Color Range" not working. "Warning: No pixels were selected" returned when attempting to use. Using Photoshop CS6 on a Mac running OS X Yosemite

Here are three screenshots in succession from trying to perform the color selection:
Dropbox - Screenshot 2015-02-12 14.57.40.png
Dropbox - Screenshot 2015-02-12 15.00.14(2).png
Dropbox - Screenshot 2015-02-12 15.01.00.png

Zen Micro 5gb - Playlist on the fly with "add to selected" often does not work (AD HOC 'playlis

I've found ad-hoc playlist made from ADD TO SELECTED often does not work. Here are other issues:?. Does not add? at all OR only adds after first song selected played2. Cannot swith from ARTISTS to SONGS w/o killing list. This will kill the ongoing list.3. If I make mistake and hit the PLAY button, it wipes out the entire list I'd already made. Any of these issues resolved in Zen Vision M?

try reloading the firmware and if that doesnt work try opening the case and cleaning it if there is anything in there. the button may be stuck. and if that doesnt work i dont know what else to sugjest. it seemed to work for me.

DA for Select List is not working

Hi friends,
I have a two fields in my form.
<li>person id
<li>Manager Name(Select List)
I have given a default value for person id as'270'. So i need to write an dynamic action so that it will fetch the manager name according to the person id '270'.
Since My manager Name is an Select List type, i have given the following query in the LOV definition of this item
select papf.full_name d, papf.person_id r
from per_all_people_f papf,
     per_all_assignments_f paaf,
     per_all_people_f supf, hr_all_positions_f hapf, hr_all_organization_units haou
where papf.business_group_id = 216
and papf.person_id = paaf.person_id and hapf.position_id=paaf.position_id and haou.organization_id=paaf.organization_id
and NVL(paaf.supervisor_id, papf.person_id) = supf.person_id
and sysdate between papf.effective_start_date and papf.effective_end_date
and sysdate between paaf.effective_start_date and paaf.effective_end_date
and sysdate between supf.effective_start_date and supf.effective_end_date
and sysdate between hapf.effective_start_date and hapf.effective_end_date
and papf.person_type_id = 5145
order by 1   This is the DA, that i wrote for the person id column.
For the true action, i have given as 'Set Value' and given the following query
select supf.full_name
from per_all_people_f papf,
     per_all_assignments_f paaf,
     per_all_people_f supf, hr_all_positions_f hapf, hr_all_organization_units haou
where papf.business_group_id = 216
and papf.person_id = paaf.person_id and hapf.position_id=paaf.position_id and haou.organization_id=paaf.organization_id
and NVL(paaf.supervisor_id, papf.person_id) = supf.person_id
and sysdate between papf.effective_start_date and papf.effective_end_date
and sysdate between paaf.effective_start_date and paaf.effective_end_date
and sysdate between supf.effective_start_date and supf.effective_end_date
and sysdate between hapf.effective_start_date and hapf.effective_end_date
and papf.person_type_id = 5145 and papf.person_id = :P6_PERSON_IDPage item to submit: P6_PERSON_ID
Affected Element: P6_MANAGER_NAME.
Soon after the page load, the manger field has to show the corresponding manager name in the LOV according to the value '270' which is in the person id item. But it is not showing the corresponding name in the select list item.
Suppose, if the manager name item is in 'display only' means it is working, but if the manager name field is in LOV means it is not fetching the value and it is displaying only the null display value in that field.
I dont know why the DA is not working if the field is in LOV.
Brgds,
Mini

Hi Patrick,
Thanks, and this is the mistake that i made and it worked now fine.
I have Certain questions for you:
<li> Currently, i can able to send mails from APEX using APEX_MAIL, but APEX_MAIL will support only in the unauthenticated mail server. Since in our organization we have configured an unauthenticated mail server and we are using that server for the APEX mail process. The problem that im facing now is, this mail server is been used in our organization entirely for all the purpose, except the official mail.[For official mail purpose we are using Yahoo server, which is an authenticated server, and we are using that Yahoo mail server only for your official mail purpose].
For remaining all the purpose including the APEX mail process too we are using the unauthenticated mail server that we configured. Since we are make using of unauthenticated mail server for all the purpose and due to that, the mail process is getting very slow and i couldnt able to receive the mail from the APEX in time(via) this unauthenticated mail server.
So, due to that i thought of using the Yahoo mail server(which is an authenticated mail server). But APEX_MAIL doesnot support for the authenticated server, then how i can use the authenticated mail server for sending the mail via APEX. How i can able to access the Yahoo mail authenticated server from Oracle Database.(i have also enabled ACL in my DB too).
<li> Second question, is how i can able to refer the APPLICATION PROCESS in my application. Other than calling that APPLICATION PROCESS In javascript, it is possible to call that APPLICATION PROCESS in the plsql anonymous block.
Brgds,
Mini

Cut and Paste between Events not working

Using iPhoto11, I can drag and drop pictures between events, no problem...but Cut and Paste does not work.
I select a photo and cut in event A, go to event B, I right click and get a PAST button, It even clicks but nothing happen, the Cut image never gets pasted.
Is this a bug? whats the solution?

To delete the test user, go to the black apple menu, click on system preferences, then on accounts. From an administrator account, click on the "test" user and hit the "-" key. when the dialog box comes up, hit "delete the home folder" and it will be gone.
For the startup disk issue you should repair permissions. From the finder, click on the "go" menu, then on "utilities". Select disc utility. Select your HD and click on repair disk permissions. This will take several minutes (5 or more).
If that has not done the trick then you may need to reset the parameter ram (PRAM). Turn your computer off. When you turn it back on, simultaneously hold 4 keysL command-option-p-r. Keep holding them. The startup chime will ring. Continue to hold until you have heard the chime at least 2 times (more won't help or hurt). Then release.

Select and Count not working.....HELP PLEASE!!

I have the following scenerio:
SELECT #PART,#PDESC,COUNT(#PART) AS PCOUNT FROM MYLIB WHERE #PART LIKE 'AN101011%' AND #RECDT BETWEEN 19970826 AND 20020826 GROUP BY #PART,#PDESC
//brings back count of 1 which is right...only one part within the date range
PCOUNT: 1
SELECT #PART,#PDESC,COUNT(#PART) AS PCOUNT FROM MYLIB WHERE #PART LIKE 'AC043208%' OR #PART LIKE 'AN101011%' AND #RECDT BETWEEN 19970826 AND 20020826 GROUP BY #PART,#PDESC
//looped through result set and these two counts are right
PCOUNT: 1
PCOUNT: 1
SELECT #PART,#PDESC,COUNT(#PART) AS PCOUNT FROM MYLIB WHERE #PART LIKE 'AN101011%' OR #PART LIKE 'AC043208%' AND #RECDT BETWEEN 19970826 AND 20020826 GROUP BY #PART,#PDESC
//now brings back a pcount of 2 for the first part which is shouldn't, there are two parts with the same number but only one which falls within the date range.
PCOUNT: 2
PCOUNT: 1
could anyone help me with this.....thanks in advance

Found the solution....its in the order of processing of the select statement...for others future reference....
SELECT #PART,#PDESC,COUNT(#PART) AS PCOUNT FROM MYLIB WHERE #PART LIKE 'AN101011%' AND #RECDT BETWEEN 19970826 AND 20020826 GROUP BY #PART,#PDESC
//brings back count of 1 which is right...only one part within the date range
PCOUNT: 1
SELECT #PART,#PDESC,COUNT(#PART) AS PCOUNT FROM MYLIB WHERE #PART LIKE 'AC043208%' OR #PART LIKE 'AN101011%' AND #RECDT BETWEEN 19970826 AND 20020826 GROUP BY #PART,#PDESC
//looped through result set and these two counts are right
PCOUNT: 1
PCOUNT: 1
//*****this works because in actual fact it is reading the date range and it associates it with the last part number so it reads it like this (note the brackets):
SELECT #PART,#PDESC,COUNT(#PART) AS PCOUNT FROM MYLIB WHERE #PART LIKE 'AC043208%' OR (#PART LIKE 'AN101011%' AND #RECDT BETWEEN 19970826 AND 20020826) GROUP BY #PART,#PDESC
SELECT #PART,#PDESC,COUNT(#PART) AS PCOUNT FROM MYLIB WHERE #PART LIKE 'AN101011%' OR #PART LIKE 'AC043208%' AND #RECDT BETWEEN 19970826 AND 20020826 GROUP BY #PART,#PDESC
//now brings back a pcount of 2 for the first part which is shouldn't, there are two parts with the same number but only one which falls within the date range.
PCOUNT: 2
PCOUNT: 1
//***this did not work because the date range only applied to the last part number not the first..so it read it like (note the brackets):
SELECT #PART,#PDESC,COUNT(#PART) AS PCOUNT FROM MYLIB WHERE #PART LIKE 'AN101011%' OR (#PART LIKE 'AC043208%' AND #RECDT BETWEEN 19970826 AND 20020826) GROUP BY #PART,#PDESC
//**Therefore, I changed it to (including the brackets) and it ran fine:
SELECT #PART,#PDESC,COUNT(#PART) AS PCOUNT FROM MYLIB WHERE (#PART LIKE 'AN101011%' OR #PART LIKE 'AC043208%') AND #RECDT BETWEEN 19970826 AND 20020826 GROUP BY #PART,#PDESC

Select between clips not working

Similar Messages

Maybe you are looking for