SELECT command using String

Hi
How can I do to select data using string with range:
srch_strA = notcr-low.
srch_strb = notcr-high.
* Building selection
IF srch_strA IS NOT INITIAL AND srch_strB IS INITIAL.
CONCATENATE '%' srch_strA '%' INTO srch_strA.
*document header
SELECT bukrs belnr gjahr bktxt bldat xblnr
    FROM bkpf INTO CORRESPONDING FIELDS OF TABLE it_bkpf
    WHERE bukrs EQ p_bukrs AND
          belnr IN belnr AND
          gjahr EQ p_gjahr
          AND xblnr IN xblnr
          AND BKTXT LIKE srch_strA.
ENDIF.
IF srch_strA NE '' AND srch_strB NE ''.
CONCATENATE '*' srch_strA '*' INTO srch_strA.
CONCATENATE '*' srch_strB '*' INTO srch_strB.
ti_nc-sign    = 'I'.
ti_nc-option = 'BT'.
ti_nc-low     = srch_strA.
ti_nc-high    = srch_strB.
append ti_nc. clear ti_nc.
*document header
SELECT bukrs belnr gjahr bktxt bldat xblnr
FROM bkpf INTO CORRESPONDING FIELDS OF TABLE it_bkpf
    WHERE bukrs EQ p_bukrs AND
          belnr IN belnr AND
          gjahr EQ p_gjahr
          AND xblnr IN xblnr
          AND BKTXT IN ti_nc.
ENDIF.
Thanks in advance.
Moderator message - Please use code tags around your code
Edited by: Rob Burbank on Nov 27, 2009 5:26 PM

Hi,
Pls. use this code and check if its working...
srch_strA = notcr-low.
srch_strb = notcr-high.
* Building selection
IF srch_strA IS NOT INITIAL AND srch_strB IS INITIAL.
CONCATENATE '%' srch_strA '%' INTO srch_strA.
*document header
SELECT bukrs belnr gjahr bktxt bldat xblnr
    FROM bkpf INTO CORRESPONDING FIELDS OF TABLE it_bkpf
    WHERE bukrs EQ p_bukrs AND
          belnr IN belnr AND
          gjahr EQ p_gjahr
          AND xblnr IN xblnr
          AND BKTXT LIKE srch_strA.
ENDIF.
IF srch_strA NE '' AND srch_strB NE ''.
CONCATENATE srch_strA '*' INTO srch_strA.
CONCATENATE srch_strB '*' INTO srch_strB.
ti_nc-sign    = 'I'.
ti_nc-option = 'BT'.
ti_nc-low     = srch_strA.
ti_nc-high    = srch_strB.
append ti_nc. clear ti_nc.
*document header
SELECT bukrs belnr gjahr bktxt bldat xblnr
FROM bkpf INTO CORRESPONDING FIELDS OF TABLE it_bkpf
    WHERE bukrs EQ p_bukrs AND
          belnr IN belnr AND
          gjahr EQ p_gjahr
          AND xblnr IN xblnr
          AND BKTXT IN ti_nc.
ENDIF.
Thanks,
Sid

Similar Messages

Select command using package size

Hi all,
I have to fetch the same record comparing the records from two data base table for which i m using
select * from dbtab1 into table itab1 package size n
select * from dbtab2 into itab2
where field = itab1-field.
endselect.
the loop of select is executed once for second time its givin dump.
please help.
regards,
Gayatri

Hi Gayatri,
You can try following code:
DATA: l_itab1 LIKE itab1 OCCURS 0 WITH HEADER LINE.
Select first data for first select statement. Then select data for second select statement outside the ***** first select statement.
SELECT *
    FROM dbtab1
    INTO TABLE itab1
    PACKAGE SIZE n
ENDSELECT.
IF NOT itab1[] IS INITIAL.
   SORT itab1 by field.
   l_itab1[] = itab1[].
   SELECT *
   FOR ALL ENTRIES IN l_itab1
   FROM dbtab2
   INTO itab2
WHERE field = l_itab1-field.
ENDIF.
Hope this help you.
Regards,
Anil
Edited by: Anil Salekar on Feb 23, 2009 11:45 AM

Selection commands

Can I get an overview of all selection commands used in Reporting........

Hi,
Check this links.
https://forums.sdn.sap.com/click.jspa?searchID=566920&messageID=2530152
https://forums.sdn.sap.com/click.jspa?searchID=566920&messageID=2685456
https://forums.sdn.sap.com/click.jspa?searchID=566920&messageID=2834425
https://forums.sdn.sap.com/click.jspa?searchID=566920&messageID=2809626
-Priyanka.

Using a VARCHAR2 in a SELECT command

I'm trying to query for a given path in a hierarchy of products. However, I want to be able to have it return multiple values. So, I created a string in my function below that returns identifiers like "(34, 43, 54)" to be used in a SELECT IN. The function works fine, but the select command fails. How can I get the SELECT to work?
CREATE TABLE PRODUCT (
PRODID NUMBER,
PARENTID NUMBER,
CATID NUMBER,
ALIAS VARCHAR2(128)
CREATE OR REPLACE FUNCTION FIND_PRODS_BY_PATH
(CAT_ID IN NUMBER, IN_PATH IN VARCHAR2) RETURN VARCHAR2 IS
PROD_IDS VARCHAR2(1024);
BEGIN
PROD_IDS := '(';
FOR PROD IN (SELECT PRODID, SYS_CONNECT_BY_PATH(ALIAS, '/') AS PATH FROM PRODUCT
    WHERE CATID=CAT_ID CONNECT BY PRIOR PRODID=PARENTID)
LOOP
    IF REGEXP_LIKE(PROD.PATH, IN_PATH) THEN
      IF LENGTH(PROD_IDS) > 1 THEN
        PROD_IDS := PROD_IDS || ', ';
      END IF;
      PROD_IDS := PROD_IDS || PROD.PRODID;
    END IF;
END LOOP;
PROD_IDS := PROD_IDS || ')';
RETURN PROD_IDS;
END FIND_PRODS_BY_PATH;
*** Doesn't like the varchar2 returned from the function ***
SELECT * FROM PRODUCT WHERE PRODID IN FIND_PROD_BY_PATH(5, '/my/product/path/*');
Error report:
SQL Error: ORA-01722: invalid number
*** Function works ***
SELECT FIND_PROD_BY_PATH(5, '/my/product/path/*') FROM DUAL;
FIND_PRODS_BY_PATH(5, '/my/product/path/*')
(301152, 301202, 301252, 301302, 301403)

Your function is effectively returning a single string, which is not automatically devived into individual tokens for using in the IN clause.
How to circumvent this is best described here:
http://www.oracle.com/technology/oramag/oracle/07-mar/o27asktom.html
(search for "Varying IN Lists")

Which case in LV Oper. Intf. will do "Run Selected Steps using single pass" for me?

I added a button to simulate "Run Selected Steps", but I really want a button that will "Run Selected Steps Using Single Pass". Which case in the Complex Labview Operator Interface does this for me? What I really want is the report to be generated which happens when I use "Run Selected Steps Using Single Pass" but no report when I select "Run Selected Steps".
Thanks!

I figured out how to make this work. Instead of calling the Sequence File View Manager ConnectCommand method using the Run Selected Steps button and the CommandKind_RunSelectedSteps command kind, you use the CommandKind_RunSelectedStepsUsingEntryPoints_Set command kind. The tricky part is that before you can use the ConnectCommand method with the CommandKind_RunSelectedStepsUsingEntryPoints_Set command kind, you have to create a set of new commands. Do this by first invoking the Application Manager method NewCommands. This method returns an empty set of commands. You must then add a new command to that set. Do this by invoking the InsertKind method on the empty set of commands using CommandKind_RunEntryPointOnSelectedSteps for cmdKind, Sequence File View Manager for managerControl, -1 for insertBefore, and empty strings for currentMenuName and allMenuNames parameters. Once you have made these calls, then you can call the Sequence File View Manager ConnectCommand method using the CommandKind_RunSelectedStepsUsingEntryPoints_Set command kind.
The previous instructions work just the same for the Loop On Selected Steps button. Just substitute the CommandKind_RunEntryPointOnSelectedSteps and CommandKind_RunSelectedStepsUsingEntryPoints_Set command kind constants with CommandKind_LoopEntryPointOnSelectedSteps and CommandKind_LoopOnSelectedStepsUsingEntryPoints_Set command kinds (and of course use the Loop On Selected Steps button reference instead of the Run on Selected Steps button reference when invoking the ConnectCommand method).
There is one mystery with this solution that I haven't figured out yet, besides the fact that it is so laborious and non-intuitive to me (but at least it works). Nowhere in any of the calls detailed above did I ever see a parameter to specify which execution entry point to use. I am using the default sequential model entry points Test UUTs and Single Pass. Typically you specify which entry point you want to use (such as when invoking the ConnectCommand method) in the form of an index to a set of entry points where the Test UUTs entry point corresponds to a set index of 0 and Single Pass corresponds to a set index of 1. How did the previous calls determine which entry point to use when I didn't specify anywhere which one to use? Do this just work because you can only run or loop on selected steps using no process model or the Single Pass entry point?

Cannot change SELECT command Datalist

Hi ,
I have a datalist with a selectedcommand , but i want to change it at runtime ( i have a dropdownlist and want to search based upon the values of dropdownlist) , I used this in button click event:
if (DropDownList1.Text=="blabla")
this.SqlDataSource1.SelectCommand = "SELECT prodID,[Prodname], [Price], [ProdCode], [Weights], [Size], [Photo] FROM [Products] where Cat='ct1' and Price<10000 ";
this.SqlDataSource1.DataBind();
DataList1.DataBind();
but nothing happens. I also tried http://social.msdn.microsoft.com/Forums/sqlserver/en-US/b1d4a3a5-7ba3-4383-a52a-fd472f1aad11/change-sqldatasource-select-command-at-runtime?forum=Offtopic
but it doesn't work for me . any ideas ?

Hi,
Try the below code.
if (DropDownList1.Text == "blabla")
SqlDataSource SqlDataSource1 = new SqlDataSource();
SqlDataSource1.SelectCommand = "SELECT prodID, [Prodname], [Price], [ProdCode], [Weights], [Size], [Photo] FROM [Products] where Cat='@cat' and Price < @price";
SqlDataSource1.SelectParameters.Clear();
SqlDataSource1.SelectParameters.Add("cat", TypeCode.Int32, "1");
SqlDataSource1.SelectParameters.Add("price", TypeCode.Decimal, "1");
//your connection string from web.config
SqlDataSource1.ConnectionString = ConfigurationManager.ConnectionStrings["ConnectString"].ConnectionString;
DataList1.DataSource = SqlDataSource1;
DataList1.DataBind();
SRIRAM

Reading the record and displaying when u select it using checkbox

hi,
       how to read the particilar record and display it in a popup screen when u select it using checkbox and then press 'DISP' button in alv(normal alv not with oops concepts).
like i select a row which is checked (checkbox) it and i have to read that particular record and display (value of keyfield say vbeln) details in a popup screen.

hi,
go through the faloowing code.
this for normal popup.
*& Report ZGS_ALV_POPUP_2_SELECT
REPORT ZGS_ALV_POPUP_2_SELECT.
TYPE-POOLS: slis.
PARAMETERS: p_title TYPE sy-title default 'Sales Document:item data'.
DATA: itab TYPE vbap OCCURS 0 WITH HEADER LINE,
      selfield TYPE slis_selfield.
START-OF-SELECTION.
SELECT *
    FROM vbap
    INTO TABLE itab
    UP TO 20 ROWS.
CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
       EXPORTING
            i_title                 = p_title
*           I_SELECTION             = 'X'
           I_ZEBRA                 = 'X '
*           I_SCREEN_START_COLUMN   = 0
*           I_SCREEN_START_LINE     = 0
*           I_SCREEN_END_COLUMN     = 0
*           I_SCREEN_END_LINE       = 0
*           I_CHECKBOX_FIELDNAME    =
*           I_LINEMARK_FIELDNAME    =
*           I_SCROLL_TO_SEL_LINE    = 'X'
            i_tabname               = 'ITAB'
            i_structure_name        = 'VBAP'
*           IT_FIELDCAT             =
*           IT_EXCLUDING            =
*           I_CALLBACK_PROGRAM      =
*           I_CALLBACK_USER_COMMAND =
*            is_private              =
     IMPORTING
            es_selfield             = selfield
*            e_exit                  =
       TABLES
            t_outtab                = itab
       EXCEPTIONS
            program_error           = 1
            OTHERS                  = 2.
IF sy-subrc <> 0.
    MESSAGE i000(8I) WITH sy-subrc.
ENDIF.
WRITE:
         / 'Table Index : ', 20 selfield-tabindex,
        / 'Table Name : ', 15 selfield-tabname,
        / 'Field Name : ', 15 selfield-fieldname,
        / 'Table-Field : ', 15 selfield-sel_tab_field,
        / 'Field Value : ', 15 selfield-value.
the falowing code is for how to put checkbox and how to display the selected recods.you combine both codes.
*& Report ZRP_SALES
REPORT ZRP_SALES NO STANDARD PAGE HEADING.
DATA: TEMP_DATE_STR TYPE STRING.
*DATA: TEMP_NETP LIKE VBAK-NETWR.
DATA: TEMP_NETWR(10).
*DATA: TEMP_VBELN LIKE VBAK-VBELN.
DATA: CHECK TYPE C VALUE ' '.
*DATA: WA_VBELN LIKE VBAK-VBELN.
DATA: TEMP_DATE LIKE VBAK-ERDAT.
*DATA: TEMP_NETP_STR TYPE STRING.
DATA:FNAM(20), FVAL(20).
TYPES: BEGIN OF MY_VBAK,
       VTWEG TYPE VTWEG,
       VKORG TYPE VKORG,
       SPART TYPE SPART,
       NETWR TYPE NETWR_AK,
       VBELN TYPE VBELN_VA,
       ERDAT TYPE ERDAT,
       END OF MY_VBAK.
DATA: IT_VBAK TYPE MY_VBAK OCCURS 0 WITH HEADER LINE.
DATA: WA_VBAK TYPE MY_VBAK.
DATA: V_VBELN TYPE VBELN,
      V_ERDAT TYPE ERDAT.
SELECT-OPTIONS:S_VBELN FOR V_VBELN,
               S_ERDAT FOR V_ERDAT.
AT SELECTION-SCREEN.
*Check for Sales Order number to be non-initial.
IF S_VBELN IS INITIAL.
*Checking for Date to be non-nitial.
    IF S_ERDAT IS INITIAL.
      MESSAGE E003(ZRP_MSG). " Please enter either SO number or Date.
    ELSE.
*Validating the right low values for Date select option
      SELECT SINGLE ERDAT
             FROM VBAK INTO TEMP_DATE
             WHERE VBELN EQ S_VBELN-LOW OR ERDAT EQ S_ERDAT-LOW.
      IF SY-SUBRC NE 0.
        MESSAGE E004(ZRP_MSG).
      ENDIF.
*Validating the right high values for Date select option
      SELECT SINGLE ERDAT
              FROM VBAK INTO TEMP_DATE
              WHERE ERDAT EQ S_ERDAT-HIGH OR VBELN EQ S_VBELN-HIGH.
      IF SY-SUBRC NE 0.
        MESSAGE E005(ZRP_MSG).
      ENDIF.
    ENDIF.
ELSE.
*Checking for Date to be non-nitial.
    IF S_ERDAT IS NOT INITIAL.
      MESSAGE E003(ZRP_MSG). " Please enter either SO number or Date.
    ENDIF.
*Validating the right low values
    SELECT SINGLE VBELN
           FROM VBAK INTO S_VBELN
           WHERE VBELN EQ S_VBELN-LOW.
    IF SY-SUBRC NE 0.
      MESSAGE E001(ZRP_MSG).
    ENDIF.
*Validating the right high values
    IF S_VBELN-HIGH IS NOT INITIAL.
      SELECT SINGLE VBELN
              FROM VBAK INTO S_VBELN
              WHERE VBELN EQ S_VBELN-HIGH.
      IF SY-SUBRC NE 0.
        MESSAGE E002(ZRP_MSG).
      ENDIF.
    ENDIF.
ENDIF.
START-OF-SELECTION.
*First Screen.
SET PF-STATUS 'DISP'.
IF S_VBELN IS NOT INITIAL.
    SELECT   VTWEG VKORG SPART NETWR VBELN ERDAT
           FROM VBAK
           INTO TABLE IT_VBAK
           WHERE VBELN IN S_VBELN.
ENDIF.
IF S_ERDAT IS NOT INITIAL.
    SELECT VTWEG VKORG SPART NETWR VBELN ERDAT
           FROM VBAK
           INTO TABLE IT_VBAK
           WHERE ERDAT IN S_ERDAT.
ENDIF.
SORT IT_VBAK BY VKORG VTWEG SPART.
END-OF-SELECTION.
LOOP AT IT_VBAK.
    MOVE IT_VBAK-NETWR TO TEMP_NETWR.
    MOVE IT_VBAK-ERDAT TO TEMP_DATE.
    WRITE:/6 CHECK AS CHECKBOX.
    FORMAT COLOR 1.
    WRITE: IT_VBAK-VBELN UNDER 'SALES ORDER NO.' .
    WRITE: IT_VBAK-ERDAT UNDER 'DATE'.
    FORMAT COLOR OFF.
    FORMAT COLOR 2.
    WRITE: TEMP_NETWR UNDER 'NET PRICE'.
    FORMAT COLOR OFF."TEMP_NETWR,
    FORMAT COLOR 3.
    WRITE:IT_VBAK-VKORG UNDER 'SALES ORG',
          IT_VBAK-VTWEG UNDER 'DIST CHANNEL',
          IT_VBAK-SPART UNDER 'DIVISION'.
    FORMAT COLOR OFF.
    SKIP 1.
*FOR SUBTOTALS
    AT END OF SPART.
      SUM.
      FORMAT COLOR 5.
      WRITE:/6 'SUB TOTOAL OF NET PRICE IS : '.
      WRITE: 32 IT_VBAK-NETWR CURRENCY 'INR'.
      FORMAT COLOR OFF.
      SKIP 2.
    ENDAT.
*FOR GRAND TOTALS
    AT LAST.
      SUM.
      FORMAT COLOR 6.
      WRITE:/6 'GRAND TOTOAL OF NET PRICE IS : ',
      32 IT_VBAK-NETWR CURRENCY 'INR'.
      FORMAT COLOR 6.
    ENDAT.
ENDLOOP.
TOP-OF-PAGE.
FORMAT COLOR 6.
WRITE:/8    'SALES ORDER NO.',
       27   'DATE',
       42   'NET PRICE',
       57   'SALES ORG',
       70   'DIST CHANNEL',
       87   'DIVISION'.
FORMAT COLOR OFF.
SKIP 1.
*WHEN SALES ORDER IS SELECTED
AT LINE-SELECTION.
CASE :SY-LSIND.
    WHEN '2'.
      GET CURSOR FIELD FNAM VALUE FVAL.
      IF FNAM <> 'WA_VBAK-VBELN'.
        MESSAGE E006(ZRP_MSG).
      ELSE.
        SET PARAMETER ID 'MAT' FIELD FVAL.
        CALL TRANSACTION 'MM02' AND SKIP FIRST SCREEN.
ENDIF.
    ENDCASE.
*WHEN CLICKED ON PUSH BUTTON IN THE APPLICATION BAR
AT USER-COMMAND.
CASE:SY-UCOMM.
    WHEN 'DISP'.
      DO.
        CLEAR CHECK.
        CLEAR: WA_VBAK,TEMP_DATE_STR.
        READ LINE SY-INDEX FIELD VALUE CHECK
           IT_VBAK-VTWEG INTO WA_VBAK-VTWEG
*           IT_VBAK-NETWR INTO TEMP_NETP_STR
           IT_VBAK-VBELN INTO WA_VBAK-VBELN
           IT_VBAK-ERDAT INTO TEMP_DATE_STR
           IT_VBAK-VKORG INTO WA_VBAK-VKORG
           IT_VBAK-SPART INTO WA_VBAK-SPART.
        IF SY-SUBRC <> 0.
          EXIT.
        ELSEIF CHECK = 'X'.
          FORMAT COLOR 1.
          WRITE: 8 WA_VBAK-VBELN HOTSPOT. "UNDER 'SALES ORDER NO'
          WRITE: 25 TEMP_DATE_STR." UNDER 'DATE'.
          FORMAT COLOR OFF.
*       FORMAT COLOR 2.
*                   WRITE: 44 TEMP_NETP_STR." UNDER 'NET PRICE'.
*       FORMAT COLOR OFF.
          FORMAT COLOR 3.
          WRITE:44 WA_VBAK-VKORG," UNDER 'SALES ORG',
         59 WA_VBAK-VTWEG," UNDER 'DIST CHANNEL',
         72 WA_VBAK-SPART." UNDER 'DIVISION'.
          FORMAT COLOR OFF.
          SKIP 1.
        ENDIF.
      ENDDO.
ENDCASE.
TOP-OF-PAGE DURING LINE-SELECTION.
CASE:SY-LSIND.
    WHEN 1.
      FORMAT COLOR 6.
      WRITE:/8    'SALES ORDER NO.',
             25   'DATE',
*       44   'NET PRICE',
             44   'SALES ORG',
             58   'DIST CHANNEL',
             72   'DIVISION'.
      SKIP 1.
      FORMAT COLOR OFF.
<b>if helpful reward some points.</b>
Message was edited by:
        suredarreddy pulimamidi

How to use string variable onside quotes

Hi,
i would like to know how to use string variable onside quotes. what i mean is if i have a LOV variable P_STATUS as character string.
and in my PL/SQL function i give a query as
Q AS VARCHAR2(1000) := 'SELECT * FROM EMP
WHERE STATUS = :P_STATUS';
Is this correct. I Know that the above statement works when the LOV is an integer, but when i use a character LOV return value the above statement does not work. how can i get in the character LOV value.
Can someone help me please.
Thanks,
Philip.

916753 wrote:
Yes I tried binding all the values separately. It is working, but, I am trying to pass all values by variableBut you can't. The variable is holding a single string value.... that is just 1 value. Your binding are expecting multiple values. You can't bind 1 string value and expect Oracle to magically know how to break your string up into seperate values for the bind variables. What if one of your bind variables actually needed e.g. a comma seperated string as it's value? How would Oracle know that?
You must bind each thing seperately. That's the way cursors work.
, because i have more than 150 tables in which data will be load. that's why i m trying to create a unique procedure to load data one by one table. Otherwise I have to write individual procedures for per procedures.It's a hard life being a software programmer, but somebody's got to do it. Unfortunately there are too many people who try and write "generic" procedures and expect them to just work. I mean why don't Oracle just implement some SQL command so you can do...
execute immediate 'load all my tables';save us all the hassle eh!? ;)
when i write all the columns like
execute immediate (insert_string) using rc1.TOLL_ID, rc1.LANE_ID, rc1.RECEIVED_DATETIME, rc1.LANE_QUERY, c1.EXECUTED_DATETIME
but it is not possible to generate runtime variable thats why I m trying to assign all values to a single variable and use it like
execute immediate (insert_string) using (v_string)
how can I separate the values and ho to use it .Don't use execute immediate. Use the DBMS_SQL package instead and bind your values dynamically with loops to cover all the columns you need etc.

Compilation Error while using string (Please help)

Hi,
I am using "Sun WorkShop Compiler C++ SPARC Version 5.000". Compiling code which contains a "string variable" throws the following error:
"/opt/WS5/SC5.0/include/CC/./new", line 32: Error: The prior declaration for ope
rator new(unsigned) has no exception specification.
"/opt/WS5/SC5.0/include/CC/./new", line 34: Error: The prior declaration for ope
rator delete(void*) has no exception specification.
"/opt/WS5/SC5.0/include/CC/./new", line 36: Error: The prior declaration for ope
rator new[](unsigned) has no exception specification.
"/opt/WS5/SC5.0/include/CC/./new", line 38: Error: The prior declaration for ope
rator delete[](void*) has no exception specification.
4 Error(s) detected.
The command used for compilation is :
/opt/WS5/bin/CC -compat=4 -I/opt/WS5/SC5.0/include/CC -features=%all try.cpp
Would help if I could get some comments on the above.
Thanks and Regards,
M Shetty

There is a requirement that I use the Workshop 5.0
compilere with option "-compat=4".
The program I am trying to compile contains:
#include <string>
int main()
string test = "aaa";
return 0;
There is no "string" in "-compat=4". You need to
do something like this:
// --- start test.cc ---
#include <rw/cstring.h>
int main()
RWCString test = "aaa";
return 0;
// --- end test.cc ---
CC -compat=4 -library=rwtools7 test.cc

How to get the file path of selected file using JFileChooser

Hi All,
I am trying to store the file on my FTP server after selecting the file from the user workstation using JFileChooser. But I am not able to write the file on FTP server or on user local machine where application is running. I am new to this FTP server coding. Can anyone help me in this.
This is the code I wrote on button click user will able to select the file:
String filename1;
File file;
JFileChooser fc = new JFileChooser();
fc.showOpenDialog(this);
file = fc.getSelectedFile();
filename1 = file.getPath();
txtFilePath.setText(filename1);
Below is the code to write the file on my local machine first:
BufferedWriter outFile = new BufferedWriter( fileName ) );
outFile.write();
outFile.flush( );
outFile.close( );
Any help will be greatly appriciated

rp0428 wrote:
>
BufferedWriter outFile = new BufferedWriter( fileName ) );
>
There is NOTHING named 'fileName' in any of the code you posted so that code can't possibly compile let alone actually run.
How can anyone help you if you won't post the actual code you are using?Its just a random snippet of other code that is totally irrelevant to this thread if you ask me.

SELECT command denied

Hi guys,
We have an issue about toplink. We have two enviroments, a developer enviroment glassfish 2.1, windows xp and java 1.6. Our application have toplink essentials, JPA and some entities mapped. In developer enviroment it all works done but in test enviroment we cant execute any query! And we cant understand why, we talk with our DBA and he got all grants to user but we have allways same problem:
[#|2009-12-30T12:31:03.562-0300|WARNING|sun-appserver2.1|oracle.toplink.essentials.session.file:/opt/glassfish/domains/domain1/applications/j2ee-apps/kmonitor-EAR/KMonitor-ejb_jar/-KMonitor|_ThreadID=225;_ThreadName=p: thread-pool-1; w: 196;_RequestID=fda25a98-2c3a-43d0-ae4e-4a1c1cd3167f;|
Local Exception Stack:
Exception [TOPLINK-4002] (Oracle TopLink Essentials - 2.1 (Build b31g-fcs (10/19/2009))): oracle.toplink.essentials.exceptions.DatabaseException
Internal Exception: com.mysql.jdbc.exceptions.jdbc4.MySQLSyntaxErrorException: SELECT command denied to user 'km_dsv'@'cassini' for table 'fontestatus'
Error Code: 1142
Call: SELECT id_fontestatus, criacao, usuario_criacao, nome, alteracao, codigo, usuario_alteracao, descricao FROM kmonitor.fontestatus WHERE (id_fontestatus = ?)
bind => [1]
Query: ReadObjectQuery(com.knowtec.suiteic.kmonitor.informacao.entity.Fontestatus)
Its the first query and its executed from JPA... we use mysql database.
Here persistence.xml:
<?xml version="1.0" encoding="UTF-8"?>
<persistence version="1.0" xmlns="http://java.sun.com/xml/ns/persistence" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd">
<persistence-unit name="KMonitor" transaction-type="JTA">
<jta-data-source>jdbc/kmonitor</jta-data-source>
<exclude-unlisted-classes>false</exclude-unlisted-classes>
<properties/>
</persistence-unit>
<persistence-unit name="KMonitor-standalone" transaction-type="RESOURCE_LOCAL">
<non-jta-data-source>jdbc/kmonitor</non-jta-data-source>
<exclude-unlisted-classes>false</exclude-unlisted-classes>
<properties>
</properties>
</persistence-unit>
</persistence>
We use KMonitor in glassfish, stand-alone unit is not used and ignore it.
Thanks!

Hi I discovered problem. Top link doesnt have correct message for this problem!
My entity had this annotation:
@Entity
@Table(name = "fontestatus", catalog = "databasename", schema = "")
But catalog doesn´t exist in test enviroment, only development! solution is delete this:
@Entity
@Table(name = "fontestatus")

Running unix command using java shows error

Hi All,
I am trying to run UNIX move command using Java exec method but its throwing error, unable to rename. Here below is the code i am trying to run to move all files from one directory to another directory. source and destination directory exists.
public class Demo
    public static void main(String args[])
        try
            Runtime rt = Runtime.getRuntime();
            Process proc = rt.exec("mv /home/demo1/* /home/demo2");
            int exitVal = proc.waitFor();
            System.out.println("Process exitValue: " + exitVal);
        } catch (Throwable t)
            t.printStackTrace();
}if i give "mv /home/demo1 /home/demo2" in exec method, its working, with * character its giving problem.
Please help me in resolving the problem.
Thank you

Characters like *, >, &, |, etc. are interpreted by the command shell--that is by the bash, zsh, etc. programs. When you execute a command with ProcessBuilder or Runtime.exec, you're not going through one of those shells, so their interpretation of those characters is not available.
In your code, the character * is being delivered directly to the mv command (which doesn't think * is anything special), as opposed to being turned into a list of files and directories as it would be when it's interpreted by the shell. The mv command doesn't know anything about the * character being special.
If you want to have those shell interpretations, you need to execute the command through a shell. One example is like so, but a) you'll want to read up on the methods in exec() that take arrays of String, and b) you'll want to read up on ProcessBuilder, and c) you'll need to check your shell's man pages to see the exact syntax and arguments.
runtime.exec("/bin/bash -c 'mv x/* y'");

Running 5 commands using array elements and waiting between?

Hi All,
Trying to learn PS so please be patient with me ;)
System: PSv3 on Win2012 server running WSUS role
I am wanting to execute 5 commands using a 'foreach' loop but wait until one finishes before moving onto the next. Can you please check out what I have and provide some suggestions of improvement? or scrap it completely if it's rubbish :(
Current code:
#### SCRIPT START ####
#Create and define array and elements
$Array1 = @(" -CleanupObsoleteComputers"," -DeclineSupersededUpdates -DeclineExpiredUpdates"," -CleanupObsoleteUpdates"," -CleanupUnneededContentFiles"," -CompressUpdates")
#Run the cleanup command against each element
foreach ($element in $Array1) {
Get-WsusServer | Invoke-WsusServerCleanup $element -Whatif
#### SCRIPT END ####
I am assuming that I need to use @ to explicitly define elements since my second element contains two commands with a space between?
The cleanup command doesn't accept '-Wait' so I'm not sure how to implement a pause without just telling it to pause for x time; not really a viable solution for this as the command can sometime take quite a while. They are pretty quick now that I do
this all the time but just want it to be future proof and fool proof so it doesn't get timeouts as reported by others.
I have found lots of code on the net for doing this remotely and calling the .NET assemblies which is much more convoluted. I however want to run this on the server directly as a scheduled task and I want each statement to run successively so it
doesn't max out CPU and memory, as can be the case when a single string running all of the cleanup options is passed.
Cheers.

Thank you all for your very helpful suggestions, I have now developed two ways of doing this. My original updated (thanks for pointing me in the right direction Fred) and Boe's tweaked for my application (blew my mind when I first read that API code
Boe). I like the smaller log file mine creates which doesn't really matter because I am only keeping the last run data before trashing it anyway. I have also removed the verbose as I will be running it on a schedule when nobody will be accessing it anyway,
but handy to know the verbose commands ;)
Next question: How do I time these to see which way is more efficient?
My Code:
$Array1 = @("-CleanupObsoleteComputers","-DeclineSupersededUpdates","-DeclineExpiredUpdates","-CleanupObsoleteUpdates","-CleanupUnneededContentFiles","-CompressUpdates")
$Wsus = Get-WsusServer
[String]$Logfile = 'C:\Program Files\Update Services\LogFiles\ArrayWSUSCleanup.log'
[String]$Logfileold = 'C:\Program Files\Update Services\LogFiles\ArrayWSUSCleanup.old'
If (Test-Path $Logfileold){
Remove-Item $Logfileold
If (Test-Path $Logfile){
Rename-Item $Logfile $Logfileold
foreach ($Element in $Array1)
Get-Date | Out-File -FilePath $LogFile -Append -width 50
Write-Output "Performing: $($Element)" | Out-File -FilePath $LogFile -Append -width 100
. Invoke-Expression "`$Wsus | Invoke-WsusServerCleanup $element" | Out-File -FilePath $LogFile -Append -width 100
Logfile Output {added 1 to show what it looks like when items are actions}:
Wednesday, 27 August 2014 2:14:01 PM
Obsolete Computers Deleted:1
Wednesday, 27 August 2014 2:14:03 PM
Obsolete Updates Deleted:1
Wednesday, 27 August 2014 2:14:05 PM
Expired Updates Declined:1
Wednesday, 27 August 2014 2:14:07 PM
Obsolete Updates Deleted:1
Wednesday, 27 August 2014 2:14:09 PM
Diskspace Freed:1
Wednesday, 27 August 2014 2:14:13 PM
Updates Compressed:1
Boe's Updated Code:
[String]$WSUSServer = 'PutWSUSServerNameHere'
[Int32]$Port = 8530 #Modify to the port your WSUS connects on
[String]$Logfile = 'C:\Program Files\Update Services\LogFiles\APIWSUSCleanup.log'
[String]$Logfileold = 'C:\Program Files\Update Services\LogFiles\APIWSUSCleanup.old'
If (Test-Path $Logfileold){
Remove-Item $Logfileold
If (Test-Path $Logfile){
Rename-Item $Logfile $Logfileold
[Void][reflection.assembly]::LoadWithPartialName("Microsoft.UpdateServices.Administration")
$Wsus = [Microsoft.UpdateServices.Administration.AdminProxy]::getUpdateServer($WSUSServer,$False,$Port)
$CleanupMgr = $Wsus.GetCleanupManager()
$CleanupScope = New-Object Microsoft.UpdateServices.Administration.CleanupScope
$Properties = ("CleanupObsoleteComputers","DeclineSupersededUpdates","DeclineExpiredUpdates","CleanupObsoleteUpdates","CleanupUnneededContentFiles","CompressUpdates")
For ($i=0;$i -lt $Properties.Count;$i++) {
$CleanupScope.($Properties[$i])=$True
0..($Properties.Count-1) | Where {
$_ -ne $i
} | ForEach {
$CleanupScope.($Properties[$_]) = $False
Get-Date | Out-File -FilePath $LogFile -Append -width 50
Write-Output "Performing: $($Properties[$i])" | Out-File -FilePath $LogFile -Append -width 100
$CleanupMgr.PerformCleanup($CleanupScope) | Out-File -FilePath $LogFile -Append -width 200
Logfile Output {added 1 to show what it looks like when items are actions}:
Wednesday, 27 August 2014 2:32:30 PM
Performing: CleanupObsoleteComputers
SupersededUpdatesDeclined : 0
ExpiredUpdatesDeclined    : 0
ObsoleteUpdatesDeleted    : 0
UpdatesCompressed         : 0
ObsoleteComputersDeleted : 1
DiskSpaceFreed            : 0
Wednesday, 27 August 2014 2:32:32 PM
Performing: DeclineSupersededUpdates
SupersededUpdatesDeclined : 1
ExpiredUpdatesDeclined    : 0
ObsoleteUpdatesDeleted    : 0
UpdatesCompressed         : 0
ObsoleteComputersDeleted : 0
DiskSpaceFreed            : 0
Wednesday, 27 August 2014 2:32:34 PM
Performing: DeclineExpiredUpdates
SupersededUpdatesDeclined : 0
ExpiredUpdatesDeclined    : 1
ObsoleteUpdatesDeleted    : 0
UpdatesCompressed         : 0
ObsoleteComputersDeleted : 0
DiskSpaceFreed            : 0
Wednesday, 27 August 2014 2:32:36 PM
Performing: CleanupObsoleteUpdates
SupersededUpdatesDeclined : 0
ExpiredUpdatesDeclined    : 0
ObsoleteUpdatesDeleted    : 1
UpdatesCompressed         : 0
ObsoleteComputersDeleted : 0
DiskSpaceFreed            : 0
Wednesday, 27 August 2014 2:32:38 PM
Performing: CleanupUnneededContentFiles
SupersededUpdatesDeclined : 0
ExpiredUpdatesDeclined    : 0
ObsoleteUpdatesDeleted    : 0
UpdatesCompressed         : 0
ObsoleteComputersDeleted : 0
DiskSpaceFreed            : 1
Wednesday, 27 August 2014 2:32:43 PM
Performing: CompressUpdates
SupersededUpdatesDeclined : 0
ExpiredUpdatesDeclined    : 0
ObsoleteUpdatesDeleted    : 0
UpdatesCompressed         : 1
ObsoleteComputersDeleted : 0
DiskSpaceFreed            : 0

Problem in using String in Implicit Cursor

Hi,
I am facing problem in using String in Implicit Cursor:
I have initialise
DECLARE
v_grant varchar2(4000);
begin
v_grant:='SELECT TABLE_NAME FROM DUMP_USER_TABLES WHERE TABLE_NAME LIKE ';
FOR obj IN (SELECT v_grant||'''BS%''' FROM dual) LOOP
V_REVOKE:='REVOKE ALL ON ' || 'obj.TABLE_NAME' || ' FROM ' || '''TEST''';
DBMS_OUTPUT.PUT_LINE('THE REVOKE STATEMENT IS'||V_REVOKE);
num := num + 1;
END LOOP;
END;
I am not getting the value from obj.TABLE_NAME its coming as 'obj.TABLE_NAME'
Kindly anyhelp will be needful for me

Besides from what Sybrand already pointed out clearly:
Your example doesn't run at all:
MHO%xe> DECLARE
2 v_grant varchar2(4000);
3 begin
4 v_grant:='SELECT TABLE_NAME FROM DUMP_USER_TABLES WHERE TABLE_NAME LIKE ';
5 FOR obj IN (SELECT v_grant||'''BS%''' FROM dual) LOOP
6 V_REVOKE:='REVOKE ALL ON ' || 'obj.TABLE_NAME' || ' FROM ' || '''TEST''';
7 DBMS_OUTPUT.PUT_LINE('THE REVOKE STATEMENT IS'||V_REVOKE);
8 num := num + 1;
9 END LOOP;
10 END;
11 /
V_REVOKE:='REVOKE ALL ON ' || 'obj.TABLE_NAME' || ' FROM ' || '''TEST''';
FOUT in regel 6:
.ORA-06550: line 6, column 1:
PLS-00201: identifier 'V_REVOKE' must be declared
ORA-06550: line 6, column 1:
PL/SQL: Statement ignored
ORA-06550: line 7, column 49:
PLS-00201: identifier 'V_REVOKE' must be declared
ORA-06550: line 7, column 1:
PL/SQL: Statement ignored
ORA-06550: line 8, column 1:
PLS-00201: identifier 'NUM' must be declared
ORA-06550: line 8, column 1:
PL/SQL: Statement ignoredI guess you need to read up on quoting strings properly and probably also dynamic SQL.
But:
WHAT are you trying to do anyway?
I cannot parse your code at all...so what is your requirement in human language?

Problem in executing select statement using hetrogenous services

I am trying to import data from SqlServer 2005 to oracle 10g using hetrogenous services.
Oracle is installed on solaris 10 platform. I am running my query by Windows platform using Pl/Sql Developer
when i run the following query,
select * from GSecMstr@demodata2;
i get the following error message
Error: ORA-04052: error occurred when looking up remote object [email protected]
ORA-00604: error occurred at recursive SQL level 1
ORA-07268: szguns: getpwuid error.
But strange thing is that when i logon to the solaris server machine with user oracle and execute the same command using sqlplus from solaris console, then command is executed successfully

Server side tnsnames.ora file
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = solaris.ssilhr.com.pk)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
SQLServer =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = tcp)(HOST = solaris.ssilhr.com.pk)(PORT = 1522))
(CONNECT_DATA =
(SID = SQLServer)
(HS = OK)
Server side sqlnet.ora file
SQLNET.AUTHENTICATION_SERVICES= (NONE)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
Client side tnsnames.ora file
# tnsnames.ora Network Configuration File: E:\Oracle\product\10.2.0\db_2\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORCL_SUN =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.235)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl)
Client side sqlnet.ora file
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
Another thing i want to mention is that by mistake, i changed the role of user oracle from dba to root, which i have changed back to dba now.
To create database link, i used the following SQL
create public database link DEMODATA2
connect to "username"
IDENTIFIED BY "MyPassword"
using 'SQLServer';

SELECT command using String

Similar Messages

Maybe you are looking for