Select Functional Location based on Class

Hi,
In a query, I need to select the functional locations (TPLNR) based on class (KLASSE_D) and Functional Location Category(FLTYP) which are defaulted on the selection screen. FLTYP = 'G' and LKASSE_D = 'GT_RETOB'  are the values always defaulted on the selection screen.
I was hoping to select the data from table IFLOT based on FLTYP and filter it by class later. In PROD system, we have about  7 million records in IFLOT where FLTYP = 'G'.
Can anybody know a better way to select the data based on these 2 conditions?
Thanks.

Hi,
Normally the way I check for tables is as below,
Go to the screen or transaction to know the tables then on top menu System select option status
2. You will get pop-up, select Program screen double click, it will open ABAP editor,
3. Here on Menu utlities select Display Object List or (CtrlShiftF5) will take you to another screen where on left you can see menu for all the Function modules, Dictionary structures etc. Normally we can find related tables from Dictionary structures.
For getting exact tables it is always trial and error method. Pass some available data and check what are the required fields how to get dependent entries etc.
Hope it help's.
Regards,
N.Nagaraju
Edited by: NAGARAJU NANDIPATI on Jan 28, 2011 10:35 AM

Similar Messages

  • "Functional Location Label"

    PM guru's
    Please let me know what is the usage of FL label...I have activated labelling system and assigned few labels.... Can i restrict few FL by assigning the FL labels to the User Profiles of  the few of the users so that I can restrict the acess of few FL's to only limited no of user's..
    Is there any way out other than this to have authorization restriction for FL's as all the FL's share the same Struct Indicator, maint plant, planning plant and planner group etc...

    The first part of your query:
    The primary significance of a FL label is the hierarchical representation of your larger Equipments or a Group of Equipments.
    Then this helps in retrieving several queries at different levels of the Label.
    The fundamentals of a FL are very easy to understand if you go through the PLM manuals or SAP help.
    The second part of your query:
    About restricting few users to handle selected Functional Locations.
    This is very much possible. One method is through Planner Group. i.e., The Planner group you mention in the FL Master.
    Exempt this particular Planner Group value in the INGRP field (I_INGRP authorisation object) of the concerned role assigned to that particular user. Your Roles & Authorisations specialists would be able to do this.
    I hope you would be making use of this hint.
    Regards
    Jogeswara Rao

  • Change time of equipments and functional locations

    I select functional location with a specific change date (AEDAT) from table IFLO. But I have to consider also the change time. Is there a possibility to get this time? It should consider change time of general, specific, status and characteristic values changes.
    Thanks for your help.

    Hello friend,
    I am suggesting my opinion.
    You have many fields in the IFLO table just take any one field ( if does not satisfy go for next field) and find in which all tables the field is used by using where used list, so i think you can get the time value which is related to that data.
    Its my idea if i am wrong please ignore.
    Thanks,
    Sri Hari

  • Reference object structure list iam getting only functional location no

    Dears
    There is one query from our client that in reference object structure list he is getting only functional location no and not functional location description.i asked him to go to menu settings field selection -functional location and from the choose list  ask him to select functional location description .But still he couldn't get the required one. Can any body tell me the reason.

    Hi,
    You can achieve it from OIAJ tcode and set the required setting for your field IFLO-PLTXT.
    Regards,
    Keerthi

  • Help - Class name and descriptions for a function location.

    Hi Guys
    i have to write a report that displays the class and class descriptions for a function location. the user passes in either the function location(TPLNR) or the class name and  the report should display the the class characteristics and resp. values. Is there a FM that i coud use?
    please help.
    many thanks.
    seelan.

    sadiepu1 wrote:
    When I set up Words with Friends on my Fire it asked for my username and password which from a previous reply to my inquiry above stated that the S 3 doesn't store due to privacy issues. I have tried all my usual combinations of usernames and passwords and my Fire won't let me access the game as it keeps telling me that one or the other is not correct. I have deleted the app from my Fire and re-downloaded it but have the same error comes up. I have accessed the Words with Friends support both on my phone and their website but there is no live chat. I might have to take both to a Verizon store. Also, my Fire won't let me access the game without a correct username and password. To say that I am frustrated would be an understatement as well I have tried everything I can think of with no luck! Thanks for any help you can give!
    Did you use facebook to log in? 
    Verizon will not be able to help you retrieve any of the information you need.  You will have to contact Zynga.

  • Help required: class assignment and values for functional location

    Hi All,
    My requirement is to get classification data for a functional location as in IL03.
    Can any one let me know where in the standard program are they getting the assigned classes
    and class values. So that I can use the same logic.
    Thanks.

    FM BAPI_OBJCL_GETDETAIL
    OBJECTKEY                       ?0100000000000011643
    OBJECTTABLE                     IFLOT              
    CLASSNUM                        ZPMI_BLDG          
    CLASSTYPE                       003                
    KEYDATE                         29.07.2009         
    UNVALUATED_CHARS                                   
    LANGUAGE                        EN                 
    Cheers!

  • Required to get class Charateristics and values for an functional location

    Hi ,
       As per the requirement ,i have to read the class characteristics and the corresponding values for an function location.I have functional location number ,and the various class names associated with fn.location. Any pointers would be helpful
    Regards
    Arun T

    FM BAPI_OBJCL_GETDETAIL
    OBJECTKEY                       ?0100000000000011643
    OBJECTTABLE                     IFLOT              
    CLASSNUM                        ZPMI_BLDG          
    CLASSTYPE                       003                
    KEYDATE                         29.07.2009         
    UNVALUATED_CHARS                                   
    LANGUAGE                        EN                 
    Cheers!

  • Creation of Work ceter based on Functional Location.

    Hi all, Greetings.
    I have a query regarding creation of work center in PM. i m new to this module and this is my first implementation.
    The scenario is as follows.
    Here there is one Plant and which i will be considering as maintenance plant as well as maintenance planning plant. i m planning to classify the technical objects based on both Functional location as well as Equipments. there are 8 functional locations and almost 10 to 20 equipments under each functional location. Can i create work center based on functional location if so i will have to create 8 work center or can i create 3 or 4 and consider 1 work center for 2 or 3 functional locations.
    please help me on the same and correct me if i am wrong. i have no much knowledge on the same.
    Thanks in Advance.

    Hi,
    Thanks Seenu,
    So i have to clasify based on Maintenance activity types. If there are activities like repair, shutdown, testing etc. then i will have to create work center based on that?
    So i can create some activities like, Modification, Repair, standby, waiting etc and assign work center for each?
    Here we are following 4 maintenance planning preventive, predictive, breakdown & shutdown so is it possible to make 4 work center according to those.
    please correct me if i m wrong. i really have no much idea in this. any help or suggestions will be appreciated.
    Thanks in advance
    Ramya

  • Fund center derivation based on functional location cost center

    Hi,
    can anybody share the process to derive fund center based on cost center assigned to functional location/equipment of a plant maintenance order
    Thanks

    Hi Eli,
    Thanks for your response.
    Scenario is as follows:
    Cost is booked to PM order & settles to cost centers. I don't have budget at PM order level. But will have budget in fund management for cost center. So whenever I book cost to PM order it should check budget available in fund center. Fund center should be derived from cost center assigned to functional location of PM Order
    I have not used function module before for derivation. I have created a derivation rule based on functional module but there is no place to assign fund center in derivation rule. Please explain the process to derived fund center through PM order in above scenario.
    Thanks

  • Equipment Not Allowed at Functional Location ( Inst. at FunLoc is selected)

    Hi All,
    I have configure Structure Indicator like XXXX-XXXXXXXXXXXXXX. Now I have maintain functional location label like
    e.g ABCD-EFG XYZ  ( there is a space between G and X) .
    I have already allowed installation of all equipment category to functional locations at configuration. But still system gives me an error like Installing equipment is not allowed at functional location ABCD-EFG XYZ (MSG NO IA0002).
    Now if I select ABCD system is allowing to install equipment at ABCD.
    If space is a special character and i have not maintained S , then why system has created that label, it must throw an error while creating that label.
    Please suggest.
    Regards,
    Anish Ahya

    Equipments can be installed at functional location if the following changes have been made
    1. Configuration for equipment category installation (Already done in your case)
    2.  In the functional location master data in structure tab "equipment installation allowed" should be activated.
    Please allow the equipment installation from functional location master data .
    Regards,
    Tehisn

  • How to get Classes of Functional Location and Equipment

    Dear Experts,
    I would like to know how to get all the classes in Classificaition of Functional Location and Equipement, FM ITOB_GET_CLASS_STANDARD is only get 1 class, how do I get all declared classes inside classification?
    Any table or FM?
    Thank you.
    Regards,
    Weng

    Weng,
       Table KLAH would give you all the available classes for every class type.
        FM CLAF_CLASSIFICATION_OF_OBJECT would get you all the assigned classes of a particular type for a object.
    Regards
    Narasimhan

  • Table Link between Functional Location and Class

    Functional location has 'class' ( under section 'general data' in tab 'location'). Could anybody suggest the table name where I can get one to one mapping between the functional location and it's 'class'.
    I have put the functional location in KSSK-OBJEK   but when I am providing the functional location say 
    ?0100000000000838737 in this field of table KSSK, it is resulting no output. Could you please elaborate
    more or suggest something.
    Thanks,
    Hetal

    Hi Gurus
    I am also looking for same information.
    Would you please advise where to get this Internal Type?
    Also would you please advise what is the use of table KSSK in whole process?
    Thanks in advance
    Kris

  • Location-based reminder mixes-up my contact info when selecting "home" on the first reminder to a friend's home

    When I set my first location-based reminder, I set it to arrive at a friend's house. However, now the Reminders app thinks that my friend's place is my "home." His home, work, etc numbers all appear as the default entries, thinking they are my addresses when creating a new reminder. Furthermore, suddenly his picture was tied to my account, even on my computer when logging into iCloud!
    I looked everywhere and could not find this issue reported.
    Is there any way I can change it so that my home actually is my home, the default locations are my locations, and my picture is my real picture?
    And most importantly, if it cannot be fixed, given that my friend's picture and addresses are now tied to my info, is there anything else that is now mixed-up in my iPhone/iCloud account and contact info?
    Thanks much for your help!
    MikeY
    EDIT: I think I fixed this issue ( ! ) doing the following:
    I deleted every reminder from my phone
    Next I turned off Reminders under my iCloud settings. (On the iPhone under Settings->iCloud)
    When prompted, I selected to delete local reminders on my iPhone that were formerly synced.
    Next I turned the Reminders back on.
    Now I re-entered the Reminders app, and created a new reminder.
    This time I made sure to set my home as the location.
    Once saved, all further location-based reminders correctly identify my home/work/etc...and now my friend's home is added as a "Custom Location"
    Did this fully fix the issue? ...Hopefully this will help others that may see this problem....

    Also try the info in this thread: https://discussions.apple.com/message/16350173#16350173
    There is a new "My Info" part in the Mail, Contacts, Calendars section.  Make sure your contact info has been selected and then Reminders will default to both your home and work addresses.

  • Copy class of a Functional Location

    Hi All,
    I have to copy the class and characteristics of one functional location to another. Found a function module PM_COPY_SUBOBJECTS but this only copies the class but not the characteristics. Kindly suggest a function module or BAPI or any method where I can get all the characteristics copied from one FL to another.
    Thanks

    Hi rakesh,
    Thanks,
    But my requirement is by changing functional location catagory,Status profile  has to change with respect to  catagory
    Thanks in advance
    VIshal

  • Function module for Materials based on class type

    Hi ,
    Can any one suggest me how to find out Materisl based on class type any standard SAP Function module or BAPI avilable for the same?
    Regards,
    Raghu.

    hi,
    Check with one of the FM in the list.
    BAPI_MATERIAL_MAINTAINDATA_RT  Create and change material master data (reta
    BAPI_MATERIAL_DELETE                Flag Material for Deletion
    BAPI_MATERIAL_DISPLAY               Display Material
    BAPI_MATERIAL_EDIT                      Change Material
    BAPI_RETAILMATERIAL_CREATE     Create Material
    BAPI_RETAILMATERIAL_DELETE     Discontinue Material
    BAPI_STANDARDMATERIAL_CREATE   Create/Extend Material
    BAPI_MATERIAL_SAVEREPLICA       BAPI for Mass Maintenance of Material Data
    BAPI_MATERIAL_SAVEDATA          Create and Change Material Master Data
    Thanks
    sharath

Maybe you are looking for