Creation of Work ceter based on Functional Location.

Hi all, Greetings.
I have a query regarding creation of work center in PM. i m new to this module and this is my first implementation.
The scenario is as follows.
Here there is one Plant and which i will be considering as maintenance plant as well as maintenance planning plant. i m planning to classify the technical objects based on both Functional location as well as Equipments. there are 8 functional locations and almost 10 to 20 equipments under each functional location. Can i create work center based on functional location if so i will have to create 8 work center or can i create 3 or 4 and consider 1 work center for 2 or 3 functional locations.
please help me on the same and correct me if i am wrong. i have no much knowledge on the same.
Thanks in Advance.

Hi,
Thanks Seenu,
So i have to clasify based on Maintenance activity types. If there are activities like repair, shutdown, testing etc. then i will have to create work center based on that?
So i can create some activities like, Modification, Repair, standby, waiting etc and assign work center for each?
Here we are following 4 maintenance planning preventive, predictive, breakdown & shutdown so is it possible to make 4 work center according to those.
please correct me if i m wrong. i really have no much idea in this. any help or suggestions will be appreciated.
Thanks in advance
Ramya

Similar Messages

Fund center derivation based on functional location cost center

Hi,
can anybody share the process to derive fund center based on cost center assigned to functional location/equipment of a plant maintenance order
Thanks

Hi Eli,
Thanks for your response.
Scenario is as follows:
Cost is booked to PM order & settles to cost centers. I don't have budget at PM order level. But will have budget in fund management for cost center. So whenever I book cost to PM order it should check budget available in fund center. Fund center should be derived from cost center assigned to functional location of PM Order
I have not used function module before for derivation. I have created a derivation rule based on functional module but there is no place to assign fund center in derivation rule. Please explain the process to derived fund center through PM order in above scenario.
Thanks

Table Link between the Functional Location and work order

Hi Gurus,
I am stuck in a big problem and have to find a way to list down the work order with a specific user status in the system. I am trying to link it based on the functional location as the inputs will have to be functional location and the date. Can any one guide me with the tables to link these two???
Thanks in advance
Anoop

Hi,
Depending on your exact requirement, you might be able to select from view VIAUFKST_IFLOS. This would allow selection based on order, functional location and various dates. The field IPHAS will give you some system status information - value will indicate which status the order has reached. Example value = 3 indicates order is technically completed.
To get the exact system status (or user status) you need to read the JEST table. Read this table by OBJNR. The object number will have the format OR005000123456 (where 5000123456 is the order number). It will be available in the order tables.
Status values in JEST are in the internal format - example I0002 = REL. Check transaction BS23 to see the link. User status values will have the format E0002. If INACT flag is set in a jest record then that status value is not active. If you want to check for a specific status value then call function STATUS_READ.
-Paul

How can I relate an equipment with the PP Work center & functional location

Hi,
I'm trying to relate equipments with their PP work centers (field ITOBATTR-ARBPL listed in the Location tab of the equipment) and the functional location (field ITOB-TPLNR listed in the Structure tab of the equipment) through SQVI.
The workcenter is in a structure and the functional location relation in table ITOB gives me thousands of results with different functional locations per equipment so I can't tell which one is the propper one.
Additionally I would like to filter the equipments flagged for deletion, but I also can't find the field of thet flag).
In resume I need to create a query that gives me all equipments not flagged for deletion with their corresponding PP Work center and functional location.
Thanks in advance
JV

Please check table EQUZ or view V_EQUI.
In table EQUZ (GEWRK is the work center object number ) -> Use this go to table CRHD and find ARBPL for the correct time slot.
For fucntional location in EQUZ (ILOAN is the location assignment ) -> go to table ILOA with the ILOAN and fetch TPLNR.
Please ensure you fetch records which are currently valid from EQUZ (Use the valid to date field compare . Valid to date must be greater than or equal to current date).

Calculating Standard working hours based on location/department

Hi Experts,
In Fusion HCM 8.0
Is there any way to calculate the Standard working hours based on location/department and FLSA code?
For new hires, can this be populated based on above criteria?
Please let me know how to proceed on this.
Thanks in advance.
Thanks&Regards
Prasanna Kesavan

This might be better answered on the Human Capital Management (HCM) (MOSC) forum.
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

Euipment or Function location field Mandatory in Work Order

Hi
How to make either Equipment or Function location ( either of the one) mandatory in Work Order.
Thanks ini advance
Thiyagarajan

Hi ,
The field equipment or f.loc can be made mandatory using transaction variants -- but it would be applicable for all order types .....
1.use tcode SHD0 , give IW31 in Transaction code and ZIW31 in transaction variants and press create ..
2.this would take you to IW31 initial screen and enter planning plant and order types and press enter this would give the dialog box of screen variant .Here press continue and this would take you to inside screen .
3.Here you again press enter and by entering some required data you can finally reach to screen variant of reference object
and can mark the equipment or f.loc field mandatory as required .
4.Once this is finished you can you can select local object and save ... and come back and test the same ... now this trans varint ZIW31 can be assigned to user group ...
go thru the documentation of SHD0 for bette information
regards
pushpa

PP Work Center ------ PM Functional Location, PM Equipment

Hi,
For a given PP Work Center , I want to have the table where details of PM Functional Location & PM Equipment are stored, in which the PP Work Center is used.
Thnx,
Shivaa.

Hi Shivaa,
Go to T.Code : SARA and giving archive object : PM* + press F4 you will get the following
Try with the following tables:
PM_EQUI    Equipment
PM_IBASE   IBase
PM_IFLOT   Functional Locations
PM_IMRG    Measurement Documents
PM_MPLAN   Maintenance Plans
PM_NET     Object links, master data
PM_OBJLIST Serial Number History
PM_ORDER   Service and Maintenance Or
PM_PLAN    Routings
PM_QMEL    Maintenance Notifications
From the above list click the suitable one and press database table tab. You will get all the relevant database tables.
Here you go...
If it is useful reward points
Thanks
Saravana
Edited by: K Saravana Kumar on Jul 30, 2008 8:25 PM
Edited by: K Saravana Kumar on Jul 30, 2008 8:26 PM

How is functional location linked with work order tables

Hi, Experts:
I am working on a BW project to extract Plant Maintenance data from R/3 to BW system. We need to get work order data with related Functional Location data togather. When check the 2 tables AFIH for Work Order header and AUKF for Order master data, I don't see Functional Location field in neither of the 2 tables.
Can anyone please tell me how (by which table/field) Functional Location data in table IFLOT is linked to a Work Order stored in tables AFIH and AUKF?
Many Thanks,
Jenny

Hi, Thyagarajan:
Thanks for the reply! I tried to get the values of ILOAN from table AFIH. And pass the value to the field ILOAN in ITOB. However, no data returned from ITOB. The ILOAN in AFIH has different set of values from the ILOAN in ITOB.
Any suggestions?
Thanks,
Jenny

Select Functional Location based on Class

Hi,
In a query, I need to select the functional locations (TPLNR) based on class (KLASSE_D) and Functional Location Category(FLTYP) which are defaulted on the selection screen. FLTYP = 'G' and LKASSE_D = 'GT_RETOB' are the values always defaulted on the selection screen.
I was hoping to select the data from table IFLOT based on FLTYP and filter it by class later. In PROD system, we have about 7 million records in IFLOT where FLTYP = 'G'.
Can anybody know a better way to select the data based on these 2 conditions?
Thanks.

Hi,
Normally the way I check for tables is as below,
Go to the screen or transaction to know the tables then on top menu System select option status
2. You will get pop-up, select Program screen double click, it will open ABAP editor,
3. Here on Menu utlities select Display Object List or (CtrlShiftF5) will take you to another screen where on left you can see menu for all the Function modules, Dictionary structures etc. Normally we can find related tables from Dictionary structures.
For getting exact tables it is always trial and error method. Pass some available data and check what are the required fields how to get dependent entries etc.
Hope it help's.
Regards,
N.Nagaraju
Edited by: NAGARAJU NANDIPATI on Jan 28, 2011 10:35 AM

Assign functional location to operations of work orders

Hi PM experts,
I want to assign a different funcional location to each operation of a work order.
Is it possible??? How can I do that???
Thanks in advance.

Do the config in IMG => PM & CS => Maintenance & Service Processing => Maintenance & Service Orders => Functions => Define Notification & Order Integration
There for your order type, Select Assignment of Technical Objects to Operations Active.
Note: One operation can be assigned to only one functional location. If you want to assign one operation for 2 FLs, its not possible. You should define 2 different operations.
In maintenance order, in Objects tab, select the FLs. Select first FL & click Assignment button at the bottom. In pop up window, you will get the list of operations. Select the operation & assign that for the FL.

To identify a equipment based on material, plant and functional location

HI Gurus,
I wanted to identify whether there is any equipment is already created for a given material, plant and functional location. can you tell me how to findout?
Thanks
satya

Hi
Check with respect to material and serial no : TCODE : IQ08 or IQ09
Try in IH08
You can define material, plant and functional location
- Pithan
Edited by: Pithan Pithan on Mar 31, 2009 4:13 PM

Cost center in functional location

Dear all,
In functional location and in equipements it is possible to add a cost center.
Could you please tell me how this cost center is used (on creating orders and/ or notifications)? Is the cost center copied into the order? As the cost center of the workcenter/ activity type is used for the costs of an order, is there a need of this cost center in the master datas?
Thank you.
Best regards,
Thomas

Hi Thomas,
The Cost Center from the Work Center will be used for the calculation of the actual cost incurred for that Maintenance. Based on the cost center selected in Equipment & Functional Location, settlement rule will be defined in case you want to change it, do it manually as per your wish. The costs incurred will be posted in the cost centers based on equipment or settlement rule & not based on work center cost center.
Regards,
Maheswaran.

Addition of sub-screen for Functional Location / Equipment / Notification

Hi All,
Can any one help me on Addition of sub-screen based on config in new tab or sub-screen for objects for Functional Location / Equipment / Notification / Notification Item / Work OrderWork Order Operation.
If you are designed the above requirement by using ABAP objects please send sample code for the same.
I am not bothering about addtional fields which you created in your program.
Thanks a lot.
-Kalluri

Thenna,
QMIH-ILOAN -> ILOA-ILOAN
ILOA-TPLNR -> IFLOT-TPLNR
PeteA
[www.pjas.com]

Functional Location should Auto Populate when installed Equipment is select

Hi All,
In our client I have made the Functional location mandatory field during the Notification and Maintenance Order creation.
When a Work Order or Notification is created with Equipment number then Functional Location is not automatically populated.
If we create Notification and Order through IH01 then only functional location is coming automatically but I need through IW21 and IW31.
Can anybody please tell me how I can achieve this functionality?
Thanks
KAVS

Hi,
The functional location will be automatically populated in IW21/31 when you enter the equipment. However there is a problem if you make the functional location field mandatory. In that case the system expects user to fill the functional location field before any logic is executed to set a default. The screen processing, including checks for required fields, is processed first. So an error will be generated asking the user to fill the f/loc field. They will not be able to proceed until the field is filled by user input.
The solution is to not make the functional location field mandatory. You can then implement exits QQMA0014 (for notifications) and IWO10009 (for orders) to check that functional location field is not empty.
-Paul

Error in creating functional location

Hai all,
My struc.indicator is XXXX-XXXXXXXXXX-XXXXXXXX.
I have created the functional locations till the third hierarchy level.Also i created the user status and assign this profile to the functional lcoation named XXXX-XXXXXXXXXX
Based on the above settings, i have done the transactions also by changing the user status from one to another in the above said functional location.Later i decided that this user status is not relevant for this and i cancelled the assignment in the functional location and in the OIBS Object types.
Even after removal of assignment, still the assignment of status profile to the funtional lcoation is showing in the IL02.
Now i couldnt able to create the new functional location and system is throwing the following error.
No status object is available for FL #1
Message no. BS001
Diagnosis
When trying to read the status of an object (FL #1), a system error occurred: For object number TM0000000001IF there is no status object.
Procedure
Please contact your system administrator.
Now my questions are
1.How to permanently delete the assignment of userprofile still showing in the functional location even after cancel the assignment .
2.How to eliminate the above said error
Please help
Regards,
Suresh.

Hai Pete,
1.I am using IE02 for insall the equipment.
2.This is happening every time and also i tried for another functional location category and structural indicator too.
3.I am getting the same error messages whenever i am trying to create the fucntional location.
4.I changed the user status of the F.Loc and again i tried the reinstalling the equipment.No change observed.
Also, Finally i cancelled the assignment and deleted the user status profile itself.Still its not working .
Since i am concentrationg on the other part, i couldnt continoulsy do the trouble shooting.
Any other suggestions.
Regards,
Suresh.

Creation of Work ceter based on Functional Location.

Similar Messages

Maybe you are looking for