Copy class of a Functional Location

Hi All,
I have to copy the class and characteristics of one functional location to another. Found a function module PM_COPY_SUBOBJECTS but this only copies the class but not the characteristics. Kindly suggest a function module or BAPI or any method where I can get all the characteristics copied from one FL to another.
Thanks

Hi rakesh,
Thanks,
But my requirement is by changing functional location catagory,Status profile has to change with respect to catagory
Thanks in advance
VIshal

Similar Messages

Select Functional Location based on Class

Hi,
In a query, I need to select the functional locations (TPLNR) based on class (KLASSE_D) and Functional Location Category(FLTYP) which are defaulted on the selection screen. FLTYP = 'G' and LKASSE_D = 'GT_RETOB' are the values always defaulted on the selection screen.
I was hoping to select the data from table IFLOT based on FLTYP and filter it by class later. In PROD system, we have about 7 million records in IFLOT where FLTYP = 'G'.
Can anybody know a better way to select the data based on these 2 conditions?
Thanks.

Hi,
Normally the way I check for tables is as below,
Go to the screen or transaction to know the tables then on top menu System select option status
2. You will get pop-up, select Program screen double click, it will open ABAP editor,
3. Here on Menu utlities select Display Object List or (CtrlShiftF5) will take you to another screen where on left you can see menu for all the Function modules, Dictionary structures etc. Normally we can find related tables from Dictionary structures.
For getting exact tables it is always trial and error method. Pass some available data and check what are the required fields how to get dependent entries etc.
Hope it help's.
Regards,
N.Nagaraju
Edited by: NAGARAJU NANDIPATI on Jan 28, 2011 10:35 AM

Get the functional location assigments to a class

I need a function module to get the assignments to a class . ie the functional locations assigned to a class

Please elabrote the question once.
My understanding is you need a function module to get the functional locationfrom the connection object.
If it is wrong let me know i will try to help you.
Regards,
Siva

Error while updating the classification in functional location

HI
I'm adding the classification to the fuctional location, When i save the functional location it is poping me this information.
User exit ZXCLFU02: Run program RCCLUKA2 to activate table INOB
When i run this program RCCLUKA2 tried to run as per the information provided in the Help.
When i execute this program for class type 003-Functional location i dont get any results.
still the problem persisit, If any one has come across this problem please let me know to solve this issue.
Thanks
Abdul Mujeeb

Hi Pete
The message appears like this
User exit ZXCLFU02: Run program RCCLUKA2 to activate table INOB
Message no. YMD01 000
Thanks & regards,
Mujeeb

Assigning Superior Fuunctional Location to a Functional Location

Hi Experts,
I am assigning a Superior Functional Location to a Functional Location in IL02. This allows the Functional Location to inherit data from the Superior Functional Location.
However, im my scenario this is incorrect as I do not want the data to be inherited and overwritten.
Does anyone know how I can do this to prevent the data being overwritten - in terms of in IL02 or Configuration? When I use IL02 it does not give me the option to prevent it from overwriting.
Thank you,
Muna S.K Ali

There is no customizing to change that. If you copy from either ref. functional location / functional location, some of the data will be copied automatically.
Even you create some superior FL first & then derive sub FL, some fields will be copied automatically.
Go to Menu Edit => Data Origin list, you can find the fields inherited from superior.
If you want to change, go to menu Edit => Data Origin & change the option to Maintain individually
Refer this thread for further clarity.
Data origin Functional Locations

Help - Class name and descriptions for a function location.

Hi Guys
i have to write a report that displays the class and class descriptions for a function location. the user passes in either the function location(TPLNR) or the class name and the report should display the the class characteristics and resp. values. Is there a FM that i coud use?
please help.
many thanks.
seelan.

sadiepu1 wrote:
When I set up Words with Friends on my Fire it asked for my username and password which from a previous reply to my inquiry above stated that the S 3 doesn't store due to privacy issues. I have tried all my usual combinations of usernames and passwords and my Fire won't let me access the game as it keeps telling me that one or the other is not correct. I have deleted the app from my Fire and re-downloaded it but have the same error comes up. I have accessed the Words with Friends support both on my phone and their website but there is no live chat. I might have to take both to a Verizon store. Also, my Fire won't let me access the game without a correct username and password. To say that I am frustrated would be an understatement as well I have tried everything I can think of with no luck! Thanks for any help you can give!
Did you use facebook to log in?
Verizon will not be able to help you retrieve any of the information you need. You will have to contact Zynga.

Help required: class assignment and values for functional location

Hi All,
My requirement is to get classification data for a functional location as in IL03.
Can any one let me know where in the standard program are they getting the assigned classes
and class values. So that I can use the same logic.
Thanks.

FM BAPI_OBJCL_GETDETAIL
OBJECTKEY                       ?0100000000000011643
OBJECTTABLE                     IFLOT
CLASSNUM                        ZPMI_BLDG
CLASSTYPE                       003
KEYDATE                         29.07.2009
UNVALUATED_CHARS
LANGUAGE                        EN
Cheers!

Required to get class Charateristics and values for an functional location

Hi ,
   As per the requirement ,i have to read the class characteristics and the corresponding values for an function location.I have functional location number ,and the various class names associated with fn.location. Any pointers would be helpful
Regards
Arun T

FM BAPI_OBJCL_GETDETAIL
OBJECTKEY                       ?0100000000000011643
OBJECTTABLE                     IFLOT
CLASSNUM                        ZPMI_BLDG
CLASSTYPE                       003
KEYDATE                         29.07.2009
UNVALUATED_CHARS
LANGUAGE                        EN
Cheers!

How to get Classes of Functional Location and Equipment

Dear Experts,
I would like to know how to get all the classes in Classificaition of Functional Location and Equipement, FM ITOB_GET_CLASS_STANDARD is only get 1 class, how do I get all declared classes inside classification?
Any table or FM?
Thank you.
Regards,
Weng

Weng,
Table KLAH would give you all the available classes for every class type.
FM CLAF_CLASSIFICATION_OF_OBJECT would get you all the assigned classes of a particular type for a object.
Regards
Narasimhan

Table Link between Functional Location and Class

Functional location has 'class' ( under section 'general data' in tab 'location'). Could anybody suggest the table name where I can get one to one mapping between the functional location and it's 'class'.
I have put the functional location in KSSK-OBJEK but when I am providing the functional location say
?0100000000000838737 in this field of table KSSK, it is resulting no output. Could you please elaborate
more or suggest something.
Thanks,
Hetal

Hi Gurus
I am also looking for same information.
Would you please advise where to get this Internal Type?
Also would you please advise what is the use of table KSSK in whole process?
Thanks in advance
Kris

Function Location, Classes, Equipment

We have a business Situation where we are using FLOC to track our rentable assets. We Rent space on each FL and therefore need to track rental attributes here. The problem arises because we can rent to multiple customer on each FLOC. To handle this we are using Classes.
ie.
Class
Rental_Class_1, Rental_Class_2, Rental_Class_3
Characteristics
Agreement_#_1, Customer_1, Agreement_#_2, Customer_2,
This creates a problem when searching with Classes for Customer = XYZ Inc.
Does anybody have a better natural solution to my issue, instead of having to create custom reporting?
Thanks So Much!

Hiii James,
I would suggest you instead of doing it using class & characteristics, you can make use of contract functyionality in Customer service module. You can assign the equipment/Functional location to service contract & you can dismental the equipment when contract get finished.
You can also define different types contract.
You can also prevent to assign the equipment to assign the equipment to two contract at a time.
You can also change the functional location (Customer location) of equipment automatically.
You can also update the customer & End customer details & address details automatically, when assigned to contract & get vanished when it is removed from contract.
According to that you may get the history of equipment/functional location of assigning it to contract.
I hope it may solve your issue.
Regards

PM: Copy functional location to another

Hi,
Is there any function module or BAPI which can copy one functional location to another functional location. Thanks

Ya I know about the table IFLOT. But my requirement is that I need to give a functional location as the input and execute to see the hierarchical structure of this functional location. I should also have a button on this output screen to enable the user to copy this functional location and its subordinates to other functional locations. And once this is done, I need to see the newly copied FL structure in the output also. Is this possible?

Change pointer for functional location- deletion flag & activation status

Hello,
Im trying to use change pointer for functional location outbound interface. I did all required settings in BD52. The problem is with deletion flag and acive/deactive status.
I found that those two are stored in:
table     field
TAPL     LOEKZ
TAPL     PARKZ
The problem I have is that I cannot find the object for those table, and due to that it cannot be customized in BD52.
Could You please advise which object class should I use or alternatively which other table/field and object should I type in to activate change poiters for deletion flag and active/ not active status?
For object IFLO, and its table (IFLOT, IFLOTX, ILOA)- there is no field for del flag and active status.
Thanks in advance.

Hi, standard didnt let us fulfilling this requirement. What we did- we extended table IFLOT with additional field for the status and used an user exit when saving FL, to take the value (status) from table JEST/TJ02T and copy the value to the newly created field. Then BD52, iflo, iflot, and the new field and it worked. Of course the function module for the message type (BD60) had to be changed to add this status value in additional segment/field for the idoc. Hope this will help You, as there is a lot of technical background behind it, and this is only functional overview.
rgds.

FM for characterstic value of a function location (asset)

Hi All,
Can any one please tell me the FM module to be used for finding the characterstic value for a given characterisctic name of a function location in IL03 (classification).
I have tried using BAPI_CLASS_GET_CHARACTERISTICS, but it is not yielding the desired results.
Thanks in advance
Deepti

Hi,
I don't know why you are not getting the proper reult.
BAPI_OBJCL_GETDETAIL iis uesd to get both character and numeric values back form the classes.
Check this:
LV_OBJECT = I_TPLNR.
CALL FUNCTION 'BAPI_OBJCL_GETDETAIL'
EXPORTING
OBJECTKEY = LV_OBJECT
OBJECTTABLE = 'IFLOT'
CLASSNUM = 'Z_DEPOT'
CLASSTYPE = '003'
TABLES
ALLOCVALUESNUM = WT_ALLOCVALUESNUM
ALLOCVALUESCHAR = WT_ALLOCVALUESCHAR
ALLOCVALUESCURR = WT_ALLOCVALUESCURR
RETURN = IT_RETURN.
Furthermore i have a list of BAPI. [Try this link|http://www.saptechies.com/sap-bapi-list/].
May it helps you.
Regards.
DS.

ILOM0001 - functional location description (pltxt)

Hi,
problem:
the (same) description (PLTXT) of functional location has to be saved in TWO different languages every time any change is done on a functional location AND save is (pressed) processed.
User exit ILOM0001 is already implemented and can be used for further enhancements.
Open for any suggestions.
Thanks a lot for any response.

Thanks so far.
@Dwaraka
I already thought about a direct update of the IFLOTX table. But I also learned (: NOT to access standard SAP DB-Tables directly!
The user exit ILOM0001 is used only be the one project. So no issues on that end.
@Pete
It's not causing a problem -> I have to realise the proper saving/update of the same description in two different languages every time the 'SAVE' is processed.
Users can logon in (2) different languages (international company). But in EDIT mode for the technical object (func. location) the description value has to be the same!
Did I answer all your questions?
Thank's for further replies.
Eduard
At last the problem was solved. (not that nice - but anyway)
- The functional location is created (and saved) using SAP standard BAPI's.
in the User Exit i put coding which INSERTs the same PLTXT (with respectively other language code) using SAP update function module for IFLOTX. this part runs only if transaction (sy-tcode) IL01 or a specific condition are set.
- During the process the user (always!) needs to modify some Data of the functional location. [1. SET PARAMETER ID ifl FIELD f; 2. call transaction IL02 and skip first screen]
in the User Exit there is bapi call - something like IFLOTX_UPDATE or - the existend PLTXT is copied into the Importing structure of the function module and the language is switched . The text is then modified after COMMIT WORK
It's probably not the best way - but it worked.
Edited by: Eduard Reidel on Sep 15, 2009 6:34 PM

Copy class of a Functional Location

Similar Messages

Maybe you are looking for