"Select" in Search and Select doesn't do anything - Release 2
When I click on "select" in a dialog box, it doesn't do anything.
Example:
Browse the groups in Edit Portal Group Profile, radio button active, click "select". Nothing.
I expected it to populate the group name in the original text box, but you have to type the group name in.
Any ideas?
When I click on "select" in a dialog box, it doesn't do anything.
Example:
Browse the groups in Edit Portal Group Profile, radio button active, click "select". Nothing.
I expected it to populate the group name in the original text box, but you have to type the group name in.
Any ideas?
Similar Messages
-
What is the defference between select single * from and select * from Where
What is the defference between select single * from and select * from Where
which is prefferable and best one.Hai,
*Difference Between Select Single and Select * from table UpTo One Rows:*
According to SAP Performance course the SELECT UP TO 1 ROWS is faster than SELECT SINGLE because you are not using all the primary key fields.
select single is a construct designed to read database records with primary key. In the absence of the primary key, it might end up doing a sequential search, whereas the select up to 1 rows may assume that there is no primary key supplied and will try to find most suitable index.
The best way to find out is through sql trace or runtime analysis.
Use "select up to 1 rows" only if you are sure that all the records returned will have the same value for the field(s) you are interested in. If not, you will be reading only the first record which matches the criteria, but may be the second or the third record has the value you are looking for.
The System test result showed that the variant Single * takes less time than Up to 1 rows as there is an additional level for COUNT STOP KEY for SELECT ENDSELECT UP TO 1 ROWS.
The 'SELECT SINGLE' statement selects the first row in the database that it finds that fulfils the 'WHERE' clause If this results in multiple records then only the first one will be returned and therefore may not be unique.
Mainly: to read data from
The 'SELECT .... UP TO 1 ROWS' statement is subtly different. The database selects all of the relevant records that are defined by the WHERE clause, applies any aggregate, ordering or grouping functions to them and then returns the first record of the result set. -
How to select the printer and select the ICC profile for printing with VBScript?
I try to automate my printing procedure in photoshop. The problem is that I don't know how to select the printer and select the icc profile for printing with vbscript like I manually do in the print-menu in photoshop?
Anyone has done this before?
Thanx!
jusClient/Server version:
- D2KWUTIL.PLL library provides a 'Select Printer' dialog box to be used in Forms: WIN_API_DIALOG.SELECT_PRINTER
http://guenter-huerkamp.dyndns.org/oracle-doc/docs/html/d2kwutil.html
I suggest you to create a form to invoke the report, allowing user to select the printer and then pass it as parameter DESNAME -
hello applecare can you help with the macbook pro i did the update the last one and safari doesn't open anything .. what should i do ?
Hello John...
You may have a Safari third party add on installed that was compatible with the previous version of Safari but not 5.1. Try troubleshooting > Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
FYI... this is a user to user forum. If you can't resolve the issue, information for contacting AppleCare here. -
I have an iPad 3rd gen. A carrier settings update notification has appeared on my screen, and it doesn't do anything when I press either 'update' or 'not now' . Because the notification is still there, I am unable to use any apps or shut it down. What should I do?
Have you tried a reset by pressing and holding the sleep/wake button and the home button for 20 seconds (maybe longer) until the Apple logo appears, ignore the red slider. Then turn back on. You won't lose any data doing the reset.
-
im trying to instal snow leopard on my macbook. its running tiger 10.4.11 and it meets all the requirements but it ask me for a restart to begin instalation progres, i restar it and it doesn't happen anything. anyone can help me?
I assume the restart was prompted during the installation process?
First of all, that restart will take several minutes while files are moved into place and should not be interrupted.
If it fails, or you have interrupted the process, you'll need to boot from the installer (hold down the C key on startup) and use Disk Utility to erase the drive prior to continuing the installation.
That will wipe all data on the drive, though, so if you didn't make a backup before beginning the upgrade, you'll need to get your data off safely before proceeding. That may likely require the use of another Mac to access yours in Target Disc Mode. -
When updating my apps am being asked several times for my appleId password and even when providing it, it keeps asking and still doesn't update anything, any suggestions?
Does the username and password you try to use have administrator privileges? You must input an admin username and password to install.
-
What is the difference betwwen SELECT ALL Column and Select Speceific Colum
Hi All,
If the block size of the database is 8K and average row length is 2K and if we select all column of the table the I/O show that it had read more blocks then compare to
specific column of the same table. Why is this?
Secondly if Oracle brings a complete block is the db buffer cache, while reading block from disk, they why there is a difference of block count in two queries.
This difference reveals to me when I check the EXPLAIN PLAN for two different queries against the same table but one select all columns and the other one select specific column.
Kindly help me in clearing this confusion.
Regards,
Kamranuser1514587 wrote:
>
Usually, indexes are smaller (contain fewer blocks) than the table - ergo, select empno from emp could be satisfied by reading fewer blocks.
what if there is a composite Index on a table containing 3 to 4 columns and the size of table is in 100 of GB and Index size itself is vey large then I think Oracle will go for FTS and small Index scan will be expensive. Kindly Share your thoughts.
Regards,
KamranHandle: user1514587
Status Level: Newbie (5)
Registered: May 9, 2011
Total Posts: 21
Total Questions: 13 (12 unresolved)
I think you wastes everyone's time here since you rarely get answer to any posted question -
Clip inspector in imovie not working properly - when I select a picture (in project library) - and select clip adjustment it tells me that I need to select one or more clips to view Inspector tools and when I select a movie clip and then click on audio adjustments the audio adjustment appears as a speaker icon and I don't know how to get to the various audio options? It was working fine one minute and then I seemed to lose the functionality. Also editing a photo in a photo or getting rid of ken burns effect etc does not seem to work. help
Can anyone shed any light on this as I am having the same problem? One minute it works fine, the next you get the error message above.
Many thanks. -
HT4623 at the "Rescue Email" prompt I hit next and it doesn't do anything?
I am trying to update to the iOS7 but when I am at the "Rescue Email" prompt and I hit the next it doesn't do anything, now what do I do?
restart your iphone (turn off and back on again) worked for me
-
there are too many to list. when I google a site and click on it, most times I get redirected. is this a maleware issue? it seems to work fine with Explorer. for example I can open adam4adam.com in Explorer but not with Firefox.
It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating -
Performance on Select Single&Write AND Select*(For All Entries)&Read&Write
Hi Experts,
I got a code review problem & we are in a argument.
I need the best performance code out of this two codes. I have tested this both on 5 & 1000 & 3000 & 100,000 & 180,000 records.
But still, I just need a second opinion of experts.
TYPES : BEGIN OF ty_account,
saknr TYPE skat-saknr,
END OF ty_account.
DATA : g_txt50 TYPE skat-txt50.
DATA : g_it_skat TYPE TABLE OF skat, g_wa_skat LIKE LINE OF g_it_skat.
DATA : g_it_account TYPE TABLE OF ty_account, g_wa_account LIKE LINE OF g_it_account.
Code 1.
SELECT saknr INTO TABLE g_it_account FROM skat.
LOOP AT g_it_account INTO g_wa_account.
SELECT SINGLE txt50 INTO g_txt50 FROM skat
WHERE spras = 'E'
AND ktopl = 'XXXX'
AND saknr = g_wa_account-saknr.
WRITE :/ g_wa_account-saknr, g_txt50.
CLEAR : g_wa_account, g_txt50.
ENDLOOP.
Code 2.
SELECT saknr INTO TABLE g_it_account FROM skat.
SELECT * INTO TABLE g_it_skat FROM skat
FOR ALL ENTRIES IN g_it_account
WHERE spras = 'E'
AND ktopl = 'XXXX'
AND saknr = g_it_account-saknr.
LOOP AT g_it_account INTO g_wa_account.
READ TABLE g_it_skat INTO g_wa_skat WITH KEY saknr = g_wa_account-saknr.
WRITE :/ g_wa_account-saknr, g_wa_skat-txt50.
CLEAR : g_wa_account, g_wa_skat.
ENDLOOP.
Thanks & Regards,
Dileep .CHi Dilip.
from you both the code I have found that you are selecting 2 diffrent fields.
In Code 1.
you are selecting SAKNR and then for these SAKNR you are selecting TXT50 from the same table.
and in Code 2 you are selecting all the fields from SAKT table for all the values of SAKNR.
I don't know whats your requirement.
Better you declare a select option on screen and then fetch required fields from SAKT table for the values entered on screen for SAKNR.
you only need TXT50 and SAKNR fields.
so declare two types one for SAKNR and another for TXT50.
Points to be remember.
1. while using for all entries always check the for all entries table should not be blank.
2. you will have to fetch all the key fields in table while applying for all entries,
you can compare key fields with a constant which is greater than initial value.
3. while reading the table sort the table by the field on which you are going to read it.
try this:
TYPES : BEGIN OF ty_account,
saknr TYPE skat-saknr,
END OF ty_account.
TYPES : begin of T_txt50,
saknr type saknr,
txt50 type txt50,
end of t_txt50.
DATA: i_account type table of t_account,
w_account type t_account,
i_txt50 type table t_txt50,
w_txt50 type t_txt50.
select SAKNR from SKAT into table i_account.
if sy-subrc = 0.
sort i_account by saknr.
select saknr txt50 from SKAT into table i_txt50
for all entries in i_account
where SAKNR = i_account-SAKNR
here mention al the primary keys and compare them with their constants.
endif.
Note; here you need to take care that, you will have to fetch all the key fields in table i_txt50.
and compare those fields with there constants which should be greater than initial values.
they should be in proper sequence.
now for writing.
loop at i_account into w_account.
clear w_txt50.
sort i_txt50 by saknr.
read table i_txt50 into w_txt50 with key SAKNR = w_account-saknr
if sy-subrc = 0.
write: w_txt50-saknr, w-txt50-txt50.
clear w_txt50, w_account.
endif.
endloop.
Hope it wil clear your doubts.
Thanks
Lalit -
Hi,
I am facing this weird issue. Any help would be appriciated.
I have view with the following definition:
CREATE VIEW [marketing].[OpenedMails]
AS
SELECT
ID_EmailAddress,
ID_Date_Opened,
ID_Contact,
ID_MailSendJobs,
COUNT(ID_OpenedMails) AS OpenCount,
CASE
WHEN ROW_NUMBER() OVER (PARTITION BY CAST(ID_EmailAddress AS VARCHAR(10)) + ' ' + CAST(ID_MailSendJobs AS VARCHAR(10)) ORDER BY ID_Date_Opened) = 1 THEN 1
ELSE 0
END
AS UniqueOpenCount
FROM
dbo.Fact_OpenedMails
where ID_Contact = 382340
GROUP BY ID_EmailAddress, ID_Date_Opened, ID_Contact, ID_MailSendJobs;
order by ID_MailSendJobs
When I run the the select statement in the view definition I get combination of both 1 and 0 for the 'UniqueOpenCount' column.
But when I run the select from the view itself using the following query:
SELECT [ID_EmailAddress]
,[ID_Date_Opened]
,[ID_Contact]
,[ID_MailSendJobs]
,[OpenCount]
,[UniqueOpenCount]
FROM [marketing].[OpenedMails]
I get equal amount of rows but only 0 values for the 'UniqueOpenCount' column which seems to be very weird to me. Why is this happening ? Can anyone help regarding how to solve this ??
Result from the select inside view definition:
Result from the select query directly from the view:
Thanks in advance.
Vivek KamathPlease post DDL, so that people do not have to guess what the keys, constraints, Declarative Referential Integrity, data types, etc. in your schema are. Learn how to follow ISO-11179 data element naming conventions and formatting rules. You failed. Temporal
data should use ISO-8601 formats – you failed again. Code should be in Standard SQL AS much AS possible and not local dialect.
This is minimal polite behavior on SQL forums.
Things like “ID_Date_Opened” are wrong. The affixes “id” and “date” are called attribute properties in ISO-11179 and data modeling. Since a date is a unit of measurement on a temporal scale, it cannot be an identifier by definition. My guess is this would be
“open_date” if it were done right. And the only display format in ANSI/ISO Standard SQL is ISO-8601 (yyyy-mm-dd)
An email address of -1?? Email addresses are VARCHAR(256), not numeric. There is no reason to cast them AS string!
Your vague “mail_send_jobs” is plural, but columns hold scalars and cannot be plural by definition. The partition cause can hold a list of columns:
WHEN ROW_NUMBER()
OVER (PARTITION BY email_address, mail_send_job
ORDER BY open_date)
= 1
THEN 1 ELSE 0 END
This still makes no sense, but the syntax is better. You do not understand how ROW_NUMBER() works.
Would you like to try again with proper Netiquette?
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL -
Selection-Screen Parameter and select option
Hi
I had a very small and silly problem , i have a selection screen in which i had one select-options and another parameter .
when i define both variable as select option i get output but if i define plant as parameter i dont get any output, .the code .
SELECTION-SCREEN : BEGIN OF BLOCK s_screen WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_matnr FOR plaf-matnr.", " OBLIGATORY,
PARAMETERS: s_werks like plaf-pwwrk. " , " OBLIGATORY.
SELECTION-SCREEN: END OF BLOCK s_screen.
in this code when
i enter material number i dont get output .
i enter plant the i get output
SELECT afko~aufnr
afko~gamng
afko~plnbez
afpo~dwerk
afpo~psmng
afpo~matnr
INTO CORRESPONDING FIELDS OF TABLE i_afko
FROM afko INNER JOIN
afpo ON afpoaufnr = afkoaufnr
WHERE afpo~dwerk = s_werks
and afpo~matnr IN s_matnr
AND afpo~elikz = space.
regards
answers will be definately awarded pointsHi
When you use the plant in select-option, your code should be:
WHERE afpo~dwerk IN s_werks
and afpo~matnr IN s_matnr
if it's parameter:
WHERE afpo~dwerk = s_werks
and afpo~matnr IN s_matnr
Are u sayng in the first case you get the data and in the second one you don't?
Max -
select * from tablename ------always running,but get nothing
select top 1 * from tablename -------get result quickly
select top 2 * from tablename -------get result quickly
select top 14259 * from tablename --------get result quickly
select top 14260 * from tablename --------always running,but get nothing
the thread is:
java.net.SocketInputStream.socketRead0(Native Method)
java.net.SocketInputStream.read(SocketInputStream.java:150)
java.net.SocketInputStream.read(SocketInputStream.java:121)
com.microsoft.sqlserver.jdbc.TDSChannel.read(IOBuffer.java:1782)
com.microsoft.sqlserver.jdbc.TDSReader.readPacket(IOBuffer.java:4838)
- 已锁定com.microsoft.sqlserver.jdbc.TDSReader@54269910
com.microsoft.sqlserver.jdbc.TDSCommand.startResponse(IOBuffer.java:6150)
com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.doExecutePreparedStatement(SQLServerPreparedStatement.java:402)
com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement$PrepStmtExecCmd.doExecute(SQLServerPreparedStatement.java:350)
com.microsoft.sqlserver.jdbc.TDSCommand.execute(IOBuffer.java:5696)
com.microsoft.sqlserver.jdbc.SQLServerConnection.executeCommand(SQLServerConnection.java:1715)
- 已锁定java.lang.Object@320b1499
com.microsoft.sqlserver.jdbc.SQLServerStatement.executeCommand(SQLServerStatement.java:180)
com.microsoft.sqlserver.jdbc.SQLServerStatement.executeStatement(SQLServerStatement.java:155)
com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.execute(SQLServerPreparedStatement.java:332)when I run the below sql of Uri Dimant,I get many rows,I think you are right!
Do you have some method to handle this problem?
Or do you have some information for me to Learn?
Thanks a lot.
SELECT
owt.session_id AS waiting_session_id,
owt.blocking_session_id,
DB_NAME(tls.resource_database_id) AS database_name,
(SELECT SUBSTRING(est.[text], ers.statement_start_offset/2
+ 1,
(CASE WHEN ers.statement_end_offset = -1
THEN LEN(CONVERT(nvarchar(max), est.[text])) * 2
ELSE ers.statement_end_offset
END
- ers.statement_start_offset
) / 2)
FROM sys.dm_exec_sql_text(ers.[sql_handle]) AS est) AS waiting_query_text,
CASE WHEN owt.blocking_session_id > 0
THEN (
SELECT
est.[text] FROM sys.sysprocesses AS sp
CROSS APPLY sys.dm_exec_sql_text(sp.[sql_handle]) as est
WHERE sp.spid = owt.blocking_session_id)
ELSE
NULL
END AS blocking_query_text,
(CASE tls.resource_type
WHEN 'OBJECT' THEN OBJECT_NAME(tls.resource_associated_entity_id, tls.resource_database_id)
WHEN 'DATABASE' THEN DB_NAME(tls.resource_database_id)
ELSE (SELECT OBJECT_NAME(pat.[object_id], tls.resource_database_id)
FROM sys.partitions pat WHERE pat.hobt_id = tls.resource_associated_entity_id)
END
) AS object_name,
owt.wait_duration_ms,
owt.waiting_task_address,
owt.wait_type,
tls.resource_associated_entity_id,
tls.resource_description AS local_resource_description,
tls.resource_type,
tls.request_mode,
tls.request_type,
tls.request_session_id,
owt.resource_description AS blocking_resource_description,
qp.query_plan AS waiting_query_plan
FROM sys.dm_tran_locks AS tls
INNER JOIN sys.dm_os_waiting_tasks owt ON tls.lock_owner_address = owt.resource_address
INNER JOIN sys.dm_exec_requests ers ON tls.request_request_id = ers.request_id
AND owt.session_id = ers.session_id
OUTER APPLY sys.dm_exec_query_plan(ers.[plan_handle]) AS qp
GO
Maybe you are looking for
-
Sending an email in HTML format
in order to change the mail format from PDF to HTML format, first I create the smartform with the relevant content , secont I create a new class and implement the method with the code mentioned in the blog "sending HTML Email from SAP CRM/ERP" and
-
Is there a way to hide cells within a table? Thanks!!!!
-
I'm moving a camera through a 3d pipe (made in 3DS). I've got the movement sorted but I'm having trouble with the collision side of things. I want to stop my camera from passing through the tube walls. I've tried a modifier: member(Tube).model(camera
-
Hello together, i am getting inbound invoice idocs and book them as parked documents. how can i not just save the parked document, but also mark it as complete (document complete)- the invoice is complete? thanks for your help.
-
I am trying to change the radius server using PDM and I can not do it it give me an error sgtating that I need to change the server on the ACL. PLease tell me whereelse do I have to go and remove the old radius server and add a new radius server. Tha