Select length of value ?

I have a db table full of user info including email addresses (email_adds column name)
Im looking to pull all emails where the total characters in the email in > 12
can someone tell me how ?
so this should show up
[email protected]
this should not
[email protected]

Jay wrote:
I have a db table full of user info including email addresses (email_adds column name)
Im looking to pull all emails where the total characters in the email in > 12
can someone tell me how ?
so this should show up
[email protected]
this should not
[email protected]
select email_adds from table_emails where length(email_adds) > 12

Similar Messages

Selection screen field value

Hi All,
I am facing a problem with selection screen parameter.
I have one file parameter p_fname TYPE rlgrap-filename OBLIGATORY.When I enter some file path and excute I will get the result and once again when I start to execute the program I expect the previous value(file path) should be available for this file parameter that has entered on the selection screen but I am not getting that.
I dont find any parameter id for this field data element.
Please let me know how to do this?
Best Regards
Ramesh

Hi,
You should have..
DATA: FLNAME TYPE STRING.
PARAMETERS: FILENAME TYPE RLGRAP-FILENAME.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR FILENAME.
CALL FUNCTION 'F4_FILENAME'
   IMPORTING
     FILE_NAME           = FILENAME.
Find the demo code below, it uses the file :
report ZDS_BDC_MM01_2
       no standard page heading line-size 255.
*include bdcrecx1.
*parameters: dataset(132) lower case.
***    DO NOT CHANGE - the generated data section - DO NOT CHANGE    ***
*   If it is nessesary to change the data section use the rules:
*   1.) Each definition of a field exists of two lines
*   2.) The first line shows exactly the comment
*       '* data element: ' followed with the data element
*       which describes the field.
*       If you don't have a data element use the
*       comment without a data element name
*   3.) The second line shows the fieldname of the
*       structure, the fieldname must consist of
*       a fieldname and optional the character '_' and
*       three numbers and the field length in brackets
*   4.) Each field must be type C.
*** Generated data section with specific formatting - DO NOT CHANGE ***
data: begin of record OCCURS 0,
* data element: MATNR
        MATNR_001(018),
* data element: MBRSH
        MBRSH_002(001),
* data element: MTART
        MTART_003(004),
* data element: XFELD
        KZSEL_01_004(001),
* data element: MAKTX
        MAKTX_005(040),
* data element: MEINS
        MEINS_006(003),
* data element: MTPOS_MARA
        MTPOS_MARA_007(004),
      end of record.
DATA: FLNAME TYPE STRING.
*** End generated data section ***
DATA:   BDCDATA LIKE BDCDATA    OCCURS 0 WITH HEADER LINE.
*** MESSAGE******
DATA: BEGIN OF MESSTAB OCCURS 0.
        INCLUDE STRUCTURE BDCMSGCOLL.
        DATA: MATNR TYPE MARA-MATNR,
      END OF MESSTAB.
****END OF MESSAGE****
PARAMETERS: FILENAME TYPE RLGRAP-FILENAME.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR FILENAME.
CALL FUNCTION 'F4_FILENAME'
   IMPORTING
     FILE_NAME           = FILENAME.
start-of-selection.
*perform open_dataset using dataset.
perform open_group.
FLNAME = FILENAME.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = FLNAME
    FILETYPE                      = 'DAT'
*   HAS_FIELD_SEPARATOR           = ' '
*   HEADER_LENGTH                 = 0
*   READ_BY_LINE                  = 'X'
*   DAT_MODE                      = ' '
*   CODEPAGE                      = ' '
*   IGNORE_CERR                   = ABAP_TRUE
*   REPLACEMENT                   = '#'
*   CHECK_BOM                     = ' '
*   VIRUS_SCAN_PROFILE            =
*   NO_AUTH_CHECK                 = ' '
* IMPORTING
*   FILELENGTH                    =
*   HEADER                        =
TABLES
    DATA_TAB                      = record
EXCEPTIONS
   FILE_OPEN_ERROR               = 1
   FILE_READ_ERROR               = 2
   NO_BATCH                      = 3
   GUI_REFUSE_FILETRANSFER       = 4
   INVALID_TYPE                  = 5
   NO_AUTHORITY                  = 6
   UNKNOWN_ERROR                 = 7
   BAD_DATA_FORMAT               = 8
   HEADER_NOT_ALLOWED            = 9
   SEPARATOR_NOT_ALLOWED         = 10
   HEADER_TOO_LONG               = 11
   UNKNOWN_DP_ERROR              = 12
   ACCESS_DENIED                 = 13
   DP_OUT_OF_MEMORY              = 14
   DISK_FULL                     = 15
   DP_TIMEOUT                    = 16
   OTHERS                        = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT record.
DATA:
    CNT TYPE I.
    CNT = CNT + 1.
    REFRESH BDCDATA.
perform bdc_dynpro      using 'SAPLMGMM' '0060'.
perform bdc_field       using 'BDC_CURSOR'
                              'RMMG1-MTART'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RMMG1-MATNR'
                              record-MATNR_001.
perform bdc_field       using 'RMMG1-MBRSH'
                              record-MBRSH_002.
perform bdc_field       using 'RMMG1-MTART'
                              record-MTART_003.
perform bdc_dynpro      using 'SAPLMGMM' '0070'.
perform bdc_field       using 'BDC_CURSOR'
                              'MSICHTAUSW-DYTXT(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_field       using 'MSICHTAUSW-KZSEL(01)'
                              record-KZSEL_01_004.
perform bdc_dynpro      using 'SAPLMGMM' '4004'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'MAKT-MAKTX'
                              record-MAKTX_005.
perform bdc_field       using 'BDC_CURSOR'
                              'MARA-MEINS'.
perform bdc_field       using 'MARA-MEINS'
                              record-MEINS_006.
perform bdc_field       using 'MARA-MTPOS_MARA'
                              record-MTPOS_MARA_007.
perform bdc_dynpro      using 'SAPLSPO1' '0300'.
perform bdc_field       using 'BDC_OKCODE'
                              '=YES'.
*perform bdc_transaction using 'MM01'.
CALL TRANSACTION 'MM01' USING BDCDATA
                        MODE 'N'
                        UPDATE 'A'
                        MESSAGES INTO MESSTAB.
READ TABLE MESSTAB INTO MESSTAB INDEX CNT.
   IF MESSTAB-MSGTYP = 'E'.
     MESSTAB-MATNR = RECORD-MATNR_001.
     MODIFY MESSTAB INDEX CNT FROM MESSTAB. " TRANSPORTING MATNR.
   ENDIF.
ENDLOOP.
FORM OPEN_GROUP.
CALL FUNCTION 'BDC_OPEN_GROUP'
         EXPORTING CLIENT   = SY-MANDT
                    GROUP    = 'MM01'
                    USER     = SY-UNAME
                    KEEP     = 'X'.
ENDFORM.
FORM BDC_INSERT.
CALL FUNCTION 'BDC_INSERT'
   EXPORTING
     TCODE                  = 'MM01'
*     POST_LOCAL             = NOVBLOCAL
*     PRINTING               = NOPRINT
*     SIMUBATCH              = ' '
*     CTUPARAMS              = ' '
    TABLES
      DYNPROTAB              = BDCDATA
   EXCEPTIONS
     INTERNAL_ERROR         = 1
     NOT_OPEN               = 2
     QUEUE_ERROR            = 3
     TCODE_INVALID          = 4
     PRINTING_INVALID       = 5
     POSTING_INVALID        = 6
     OTHERS                 = 7
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
END-OF-SELECTION.
LOOP AT MESSTAB.
    IF MESSTAB-MSGTYP = 'E'.
      WRITE:/ 'ERROR OCCURED ON MATNR = ',MESSTAB-MATNR , 'MESSAGE : MATNR ALREADY EXISTS IN MARA!!!'.
    ENDIF.
ENDLOOP.
perform close_group.
*perform close_dataset using dataset.
*&      Form close_group
*       text
* --> p1        text
* <-- p2        text
FORM close_group .
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
   NOT_OPEN          = 1
   QUEUE_ERROR       = 2
   OTHERS            = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " close_group
*&      Form bdc_dynpro
*       text
*      -->P_0270   text
*      -->P_0271   text
FORM bdc_dynpro USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO   = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM.                    " bdc_dynpro
*&      Form bdc_field
*       text
*      -->P_0275   text
*      -->P_0276   text
FORM bdc_field USING FNAM FVAL.
IF FVAL <> ' '.
    CLEAR BDCDATA.
    BDCDATA-FNAM = FNAM.
    BDCDATA-FVAL = FVAL.
    APPEND BDCDATA.
ENDIF.
ENDFORM.                    " bdc_field
HTH
Regards,
Dhruv Shah

JTree get selected node/object values

I wan to get all the selected nodes/objects values that I added to the JTree. How can I do this?
Thanks.

TreePath[] paths = tree.getSelectedPath();
for(int i = 0; i < paths.length; i++){
TreeNode node = (TreeNode)paths.getLastPathComponent();
Object mySelectedObject = node.getUserObject();
}Some minor Errors
We have to use array paths[i] instead of paths
The correct code as used by me is
        javax.swing.tree.TreePath[] paths = jTree1.getSelectionModel().getSelectionPaths();
        for(int i = 0; i < paths.length; i++){
            javax.swing.tree.TreeNode node = (javax.swing.tree.TreeNode)paths.getLastPathComponent();
System.out.println(((javax.swing.tree.DefaultMutableTreeNode)node).getUserObject());
CSJakharia

Select-option value is not getting captured in at selection-screen on value

In Selection screen , we have Select-option and a parameter.
Based on the values given in Select-option, the values of Parameter should get populate.
To achieve this functionality,
I used At selection u2013screen on value request for <parameter> EVENT and 'F4IF_INT_TABLE_VALUE_REQUEST' Function Module.
But the Select-option values are not getting captured in this event,unless u press Enter key.
Is there any other way to achieve this functionality.
Please Guide me.

When you call function 'F4IF_INT_TABLE_VALUE_REQUEST'. make sure you send it the name of the screen variable - the F4IF_INT_TABLE_VALUE_REQUEST function calls DYNP_VALUES_READ itself if you tell it the name of your report, screen number, and the variable name... snippet below.
Jonathan
data:
    l_repid             type syrepid.
l_repid = sy-repid.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
    exporting
      dynpprog         = l_repid
      dynpnr           = '1000'
      dynprofield      = 'S_FIELD-LOW' "Select options - low value
* etc

Selection screen field value capturing

Hi,
I have developed a report for displaying amendment changes in a purchse order. The input are purchase order
and plant. Now they have asked for an additional input of version field, which should also have F4 field-value help.
For version field, default there is no F4 key. So, i have written code like after entering the PO number when we press the enter key, for the corresponding PO, it brings the version no in input field. But my problem is it is displaying the values for version field, but when i select some value it is not getting updated in selection-screen version field. I have attached my code below... please help me
in the below code my problem is only between
AT SELECTION-SCREEN on value-request for P_REVNO.
and
start-of-selection event...
TABLES : ekko,
ekpo,
cdhdr,
cdpos,
MEPO1325,
t001,
t166c,
t166t,
adrc,
komp, " net rate of header
konv, " net value of purchase order
zammendpodet.
TYPES : BEGIN OF ts_cdpos,
ebeln TYPE ekbe-ebeln,
ebelp TYPE ekbe-ebelp,
matnr type ekpo-matnr,
maktx type makt-maktx,
prdat type ekpo-prdat,
belnr TYPE ekbe-belnr,
budat TYPE ekbe-budat,
tkey(70),
txz01 TYPE ekpo-txz01,
ctxnr TYPE t166c-ctxnr,
desp(20) type C,
MEINS LIKE MARA-MEINS,
chtxt TYPE t166t-chtxt.
INCLUDE STRUCTURE cdpos.
TYPES : END OF ts_cdpos.
data : begin of it_makt occurs 0,
matnr like makt-matnr,
maktx like makt-maktx,
end of it_makt.
data : begin of it_maRA occurs 0,
matnr like maRA-matnr,
mEINS like maRA-mEINS,
end of it_maRA.
*Internal table declartion
DATA : it_erev TYPE TABLE OF erev WITH HEADER LINE,
it_ekko1 type table of ekko with header line,
it_konv2 type table of konv with header line,
it_ekpo TYPE TABLE OF ekpo WITH HEADER LINE,
it_ekpo1 TYPE TABLE OF ekpo WITH HEADER LINE,
it_cdhdr TYPE TABLE OF cdhdr WITH HEADER LINE,
it_t166c TYPE TABLE OF t166c WITH HEADER LINE,
it_ekbe TYPE TABLE OF ekbe WITH HEADER LINE,
IT_AMMEND TYPE TABLE OF ZAMMENDPODET WITH HEADER LINE,
IT_AMMEND1 TYPE TABLE OF ZAMMENDPODET WITH HEADER LINE,
it_komp TYPE TABLE OF KOMP WITH HEADER LINE,
it_konv type table of konv with header line,
it_konv1 type table of konv with header line,
it_cdpos TYPE TABLE OF ts_cdpos WITH HEADER LINE.
data : BEGIN OF it_erev1 occurs 0,
revno TYPE erev-revno.
data : end of it_erev1.
data : begin of it_cdpos1 occurs 0.
include structure cdpos.
data : ebeln like ekko-ebeln,
item like ekpo-ebelp,
aedat like ekpo-aedat,
matnr like ekpo-matnr,
txz01 like ekpo-txz01,
desp(20) type C,
MEINS LIKE MARA-MEINS,
item1 like ekpo-netpr.
data : end of it_cdpos1.
types : dy_temp TYPE lips-lgort.
DATA : dyfields LIKE dynpread OCCURS 1 WITH HEADER LINE, dy_value TYPE dy_temp.
DATA: progname TYPE sy-repid,
dynnum TYPE sy-dynnr,
dynpro_values TYPE TABLE OF dynpread,
field_value LIKE LINE OF dynpro_values.
*Work variable declaration
DATA : v_revno TYPE erev-revno,
revno1 type zammendpodet-revno,
w_version TYPE erev-revno,
w_erdat TYPE erev-erdat,
w_eruhr TYPE erev-eruhr,
wv_eruhr TYPE erev-eruhr,
v_tabkey TYPE cdpos-tabkey,
v_temp(5),
v_olddate(8),
v_newdate(8),
v_value_old TYPE cdpos-value_old,
V_OLD TYPE EKPO-BRTWR, " OLD VALUE FOR PURCHASE ORDER
l_ind TYPE i,
temp value 0 type i,
temp1 type i,
temp2 type i,
temp3 type i,
wa_cdpos like line of it_cdpos,
wa_cdpos1 like line of it_cdpos1,
v_tabkey1 TYPE cdpos-tabkey.
PARAMETERS : p_ebeln TYPE ekko-ebeln,
p_ebelp TYPE ekpo-ebelp.
p_bukrs TYPE t001-bukrs,
p_revno type erev-revno.
INITIALIZATION.
AT SELECTION-SCREEN on value-request for P_REVNO.
CLEAR: dyfields[], dyfields.
dyfields-fieldname = 'P_REVNO'.
APPEND dyfields.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-cprog
dynumb = sy-dynnr
TABLES
dynpfields = dyfields.
READ TABLE dyfields INDEX 1.
SELECT revno
FROM erev
INTO TABLE it_erev1 WHERE edokn = p_ebeln.
IF sy-subrc = 0.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'REVNO'
dynpprog = progname
dynpnr = dynnum
dynprofield = 'P_REVNO'
value_org = 'S'
TABLES
value_tab = it_eREV1
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
START-OF-SELECTION.
SELECT SINGLE *
FROM t001
WHERE bukrs EQ p_bukrs.
IF sy-subrc EQ 0.
SELECT SINGLE *
FROM adrc
WHERE addrnumber EQ t001-adrnr.
ENDIF.
SELECT SINGLE *
FROM ekko
WHERE ebeln
EQ p_ebeln
AND frgke = 2.
select * from konv into corresponding fields of table it_konv where knumv eq ekko-knumv.
useful informations will be rewarded.
thanks and regards,
subbu.,

Hi ,
       Use this function module
    call function 'DYNP_VALUES_UPDATE'
      exporting
        dyname               = sy-repid
        dynumb               = sy-dynnr
      tables
        dynpfields           = t_dynpfields
      exceptions
        invalid_abapworkarea = 1
        invalid_dynprofield = 2
        invalid_dynproname   = 3
        invalid_dynpronummer = 4
        invalid_request      = 5
        no_fielddescription = 6
        undefind_error       = 7
        others               = 8.
where t_dynpfields would contain name of field and value you want to update.
Please reward if useful.

To create a Crystal Report which will prompt for a value and if nothing is entered select the alternative value from the database record.

Hi Experts,
I am working on a report in Crystal (2008) which will prompt user to input a value, but if nothing is entered then it will select relevant database value.
I created a string parameter prompt called "{?Pack_Qty_Overide}" and used the following formula.
IF {?Pack_Qty_Overide} = ""
THEN {OITM.SalPackUn}
ELSE {?Pack_Qty_Overide}
However, when I check the formula in editor, it says that there should be a number at the end of "Else" clause.
What am I doing wrong?

Hi Janos,
OITM.SalPackUn is Numeric(19.6). When I used parameter input type as number, my formula returned error that "A number is required here" at the "if .... " statement.
So I used the formula you provided and it worked, such that when I input a quantity in parameter prompt it would display that, but if no override value given, the field remains blank - i.e. it does not display the value stored in OITM.SalPackUn.
What am I doing wrong?
Thanks,
YP

How can we select the highest value from 3 disfferent #defined values???

Hello,
Sometimes I come across the requirement of having the program automatically select the highest value
among several defined preprocessor command statements. For example:
#include "stdio.h"
#include <math.h>
#define _K_BUF_OTHERS 20
#define _k_BUF_ENV_TAGS 30
#define _k_BUF_REGS 40
#define _k_MAX(x, y, z) (max((max(x, y)), z))
int main(){
unsigned int u;
u = _k_MAX(_k_BUF_OTHERS,_k_BUF_ENV_TAGS, _k_BUF_REGS);
return 0;
In the sample above we have three (3) different define statements called :
_k_BUF_OTHERS
_k_BUF_ENV_TAGS
_k_BUF_REGS
but at any given time in certain C modules (In this case above, the main.c module) I require for the program to know
which of the three is the highest and get that highest value so I can use it downstream of my code. In this case the highest would be 40. So therefore putting the following macro anywhere in my code should make a text substitution of the macro's value
and return 40 to u:
u = _k_MAX(_k_BUF_OTHERS, _k_BUF_ENV_TAGS, _k_BUF_REGS);
But I can't even compile the program!
Here's the error I get in VC++:
1>------ Build started: Project: MinMax, Configuration: Debug Win32 ------
1> Source1.cpp
1>c:\c++_tests\minmax\minmax\source1.cpp(15): error C3861: 'max': identifier not found
1>c:\c++_tests\minmax\minmax\source1.cpp(15): error C3861: 'max': identifier not found
========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ==========
Can someone please have a look and see what I am doing wrong.
All help appreciated...
Thanks
r

On 4/12/2015 4:30 PM, roberto wrote:
1>c:\c++_tests\minmax\minmax\source1.cpp(15): error C3861: 'max': identifier not found
So implement or #define one. C standard library doesn't provide a function named "max".
Igor Tandetnik

How to get selected Row/Cell value in i5Grid

Hi Friends,
Can anyone help to how to find the selected Row/Cell value of a i5Grid object. I am able to register the event handlers which are getting invoked on row/cell selection. But I want to know how can I get the value of selected Cell/Row. I would like to add selected Items from one i5Grid to another one.
So want to know how can I get and set the value of i5Grid object.
MII version 14.0 SP4 Patch
Thank in advance
Shaji Chandran

Hi Shaji,
Here is my code.
<!DOCTYPE HTML>
<HTML>
<HEAD>
    <TITLE>Your Title Here</TITLE>
    <META http-equiv="X-UA-Compatible" content="IE=edge">
    <META http-equiv='cache-control' content='no-cache'>
    <META http-equiv='expires' content='0'>
    <META http-equiv='pragma' content='no-cache'>
    <SCRIPT type="text/javascript" src="/XMII/JavaScript/bootstrap.js" data-libs="i5Chart,i5Grid,i5SPCChart"></SCRIPT>
    <SCRIPT>
        var Grid = new com.sap.xmii.grid.init.i5Grid("STC/C5167365/i5Grid_TagQuery", "STC/C5167365/TagQuery");
        Grid.setGridWidth("640px");
        Grid.setGridHeight("400px");
        Grid.draw("div1");
    function setCellValue()
    Grid.getGridObject().setCellValue(1,1,"Set");
    function setCellValueAgain()
    Grid.getGridObject().setCellValue(1,1,"Changed Again");
    </SCRIPT>
</HEAD>
<BODY>
    <DIV id="div1"></DIV>
    <INPUT type="Button" value="setCellValue" onClick="setCellValue()"/>
    <INPUT type="Button" value="setCellValueAgain" onClick="setCellValueAgain()"/>
</BODY>
</HTML>
Regards,
Sriram

Error occured when selecting a filter value on the query

hi,
after the execution of the query on a multiprovider, i select a filter value for a particular characteristic then i get a pop up error message "Error reading the data of infoprovider ZTC_SUV12"
could anyone of you help me
Thanks and Regards,
Subha

Hello,
          Does the MultiProvider that contains an SAP RemoteCube , if so then try this depending on which system you are working.
BW 3.0B
           Implement Support Package 24 for 3.0B (BW3.0B patch 24 or SAPKW30B24 ) in your BW system. The Support Package is available ifnote 0723193 with the short text "SAPBWNews BW Support Package 3.0B Support Package 24", which describes this Support Package in greater detail, is released for customers.
BW 3.10 Content
           Implement Support Package 18 for 3.10 (BW 3.10 patch 18 or SAPKW31018) in your BW system. The Support Package is available oncenote 0723260 with the short text "SAPBWNews BW 3.1 Content Support Package 18", which describes this Support Package in more detail, has been released for customers.
BW 3.50
           Implement Support Package 09 for 3.5 (BW3.50 patch 09 or SAPKW35009</>) in your BW system. The Support Package is available oncenote 0763335 with the short text "SAPBWNews BW Support Package 09 NetWeaver'04 Stack 09", which describes this Support Package in more detail, has been released for customers.
hope it helps,

Error message while selecting a filter value

Hi Guys,
I am running a sales report n its executing fine...I mean...the report is getting displayed properly..but when i am trying to select a filter value...for example...trying to select a sold to party....when i selct that particular sold to party and execute the query...its coming up with an error...pls check..
Error msg:
The following error text was processed in the system BWP : SQL error 3114 occurred when accessing program CX_SY_OPEN_SQL_DB=============CP part LOAD.
The error occurred on the application server soabwp1_BWP_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Form: FETCH_DATA_OPENSQL of program SAPLRSDRS
Function: RSDRS_CURSOR_FETCH of program SAPLRSDRS
Function: RSDRS_READ_DATA of program SAPLRSDRS
Function: RSDRC_BASIC_DB_QUERY_DATA_GET of program SAPLRSDRC
Form: BASIC_QUERY_DATA_GET_ROLAP of program SAPLRSDRC
Function: RSDRC_BASIC_QUERY_DATA_GET of program SAPLRSDRC
Function: RSDRC_BASIC_CUBE_DATA_GET of program SAPLRSDRC
Form: DATA_GET of program SAPLRSDRC
Function: RSDRC_CUBE_DATA_GET of program SAPLRSDRC
Function: RSDRC_CUBE_DATA_GET_OLAP of program SAPLRSDRC
Its pretty urgent...I will award the highest points if this gets solved...
Thanks,
SAPconsultant.

Hi
It depends on the ssytem settings. The problem with your query is that it is not able to fetch all the data due to lack of memory. However, when you are giving smaller range, you are getting the output. You can either ask the basis guy to increase the memory space or try running the query by giving smaller date range.
Hope it helps.
Lasya.

How can we pass selected combo box value to a jsp pag?

Hi All,
I want to pass selected combo box value to a same jsp page's variable.
i am using javascript
<select onchange="this.options[this.selectedIndex].text">
</select>
this selected value should be invoked for a jsp page's variable.
Excepting for favorable reply
Vansh

select2.jsp
<script>
function x()
alert(document.f.s.options[document.f.s.selectedIndex].text);
document.f.submit();
</script>
<body>
<form method="get" name="f" action="select2.jsp">
<select name="s" onchange="x()">
<option checked>--select--</option>
<option value="1"> vijay </option>
<option value="2"> kumar </option>
</select>
</form>
</body>

Could not find selected item matching value "null" in CoreSelectOneRadio

Hello,
I get the following error with my selectOneChoice components:
WARNING Could not find selected item matching value "null" in CoreSelectOneRadio[UIXEditableFacesBeanImpl, id=dyna_2709976_11]
It seem that the component looks for a selectItem object qith its value set to null, so I tried to add one with a null value to no avail. The error don't cause any problem on the rendered page but it might spam the log when many users will be connected. Anyone every got this error and found a fix to stop it from appearing?
Regards,
Simon Lessard

you said you're using selectOneChoice but the error says radio. Is the information correct?

Could not find selected item matching value "New" warning message in ADF

Hi,
I have a selectOneChoice1 for a field which has the following fixed values in it. And while creating it, I selected the 'SelctionRequired' option so that this field will always have a value.
New
Pending
Completed.
While navigating to this page, I am trying to set the value to 'New' (Retrieved from the DB) in the backing bean. But when the page is rendered, the above field is empty with the above options in the list and jdev has the follwing error message in its log.
WARNING: Could not find selected item matching value "New" in CoreSelectOneChoice[UIXEditableFacesBeanImpl, id=selectOneChoice1]
Can any one help me with this issue?
Thanks,
Priya

The value of a list binding is the zero-based integer position in the list that is selected, not the actual underlying value.
The simplest way to set the value of an attribute is to use an attribute binding (which can be bound to the same attribute as the list binding). When you set the value of an attribute binding, it sets the value as you supply it. Otherwise, you'd need to set the list binding's value to the numerical "slot" number of the one you want to change the value to.

AT SELECTION-SCREEN ON VALUE-REQUEST FOR not input value in input field

Dear All,
I make search help for field ARBPL in selection screen are not excepted selected value.
Code is
SELECT-OPTIONS: p_arbpl FOR zdmde-arbpl MODIF ID two.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_arbpl-low.
REFRESH sh_arbpl.
SELECT * from crhd into CORRESPONDING FIELDS OF TABLE sh_arbpl.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
   EXPORTING
     RETFIELD               = 'P_ARBPL'
     DYNPROFIELD            = 'P_ARBPL'
     VALUE_ORG              = 'S'
   TABLES
     VALUE_TAB              = sh_arbpl.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_arbpl-high.
REFRESH sh_arbpl.
SELECT * from crhd into CORRESPONDING FIELDS OF TABLE sh_arbpl.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
   EXPORTING
     RETFIELD               = 'P_ARBPL'
     DYNPROFIELD            = 'P_ARBPL'
     VALUE_ORG              = 'S'
   TABLES
     VALUE_TAB              = sh_arbpl.
Please tell how to input selected field from search help into input field in both low and high.
Would appreciate your reply .
Regards,
Pooja

Hi Pooja,
For getting the response back from the user selection , please get the return code too. Before that instead of directly using the table crhd structure.. please do create a type declaration of that table , make sure that the field that you wanted to get using search help be specified at last of declaration type like this
TYPES: BEGIN OF ty,
   OBJTY TYPE CR_OBJTY,
        ARBPL TYPE ARBPL,
END OF ty.
this is because the return parameter t_rtn will holds the last value of type which been selected by user.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      RETFIELD               = 'P_ARBPL'
      DYNPROFIELD            = 'P_ARBPL'
      VALUE_ORG              = 'S'
    TABLES
      VALUE_TAB              = sh_arbpl
      return_tab             = t_rtn.
LOOP AT t_rtn INTO x_rtn .
   ENDLOOP.
try executing this code.
TABLES crhd.
TYPES: BEGIN OF ty,
   OBJTY TYPE CR_OBJTY,
        ARBPL TYPE ARBPL,
   END OF ty.
DATA: sh_arbpl TYPE TABLE OF ty.
       DATA: dynpfields TYPE TABLE OF DYNPREAD,
x_dynpfields TYPE dynpread,
t_rtn TYPE STANDARD TABLE OF DDSHRETVAL ,
x_rtn TYPE DDSHRETVAL.
SELECT-OPTIONS: p_arbpl FOR crhd-ARBPL MODIF ID two.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_arbpl-low.
REFRESH sh_arbpl.
SELECT * from crhd into CORRESPONDING FIELDS OF TABLE sh_arbpl WHERE werks eq '1000'.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      RETFIELD               = 'P_ARBPL'
      DYNPROFIELD            = 'P_ARBPL'
      VALUE_ORG              = 'S'
    TABLES
      VALUE_TAB              = sh_arbpl
      return_tab             = t_rtn.
LOOP AT t_rtn INTO x_rtn .
   ENDLOOP.
x_dynpfields-fieldname = 'P_ARBPL-LOW' .
   x_dynpfields-fieldvalue = x_rtn-fieldval.
   APPEND x_dynpfields TO dynpfields.
   CALL FUNCTION 'DYNP_VALUES_UPDATE'
     EXPORTING
       dyname                     = sy-cprog
       dynumb                     = sy-dynnr
     TABLES
       dynpfields                 = dynpfields
*   EXCEPTIONS
*     INVALID_ABAPWORKAREA       = 1
*     INVALID_DYNPROFIELD        = 2
*     INVALID_DYNPRONAME         = 3
*     INVALID_DYNPRONUMMER       = 4
*     INVALID_REQUEST            = 5
*     NO_FIELDDESCRIPTION        = 6
*     UNDEFIND_ERROR             = 7
*     OTHERS                     = 8
Regards,
Sivaganesh

Dynamic Select List Allowed Values

Howdy Folks,
I am trying to allow end users to select their username. The usernames are generated from a rule library, and displayed in a select form element. I am doing this by having the allowedValues call the rule that generates the possible names directly. The rule returns a list of valid names. The problem I am currently having, is that if the page reloads or refreshes, then the allowedValues calls the rule again. Some of the username choices involve random numbers, so it is possible (and very likely), that separate calls to the rule will generate different potential values. So what is now happening, is that when a user selects the value, the page reloads, and the end user sees an error that looks like this:
( ) - Warning: Selected value for field 'Select a Valid User Name' does not match any of the allowed values.
The reason I am reloading the page, is that I am also trying to show the user what their email address will look like with the new value. So I have a different form element that is loading is value dynamically, and referencing the select form element. This mostly works, but the warning above is unacceptable.
Is there a way I can load the dynamically created list only once, the first time the form is viewed, and not load it again every time the page refreshes?
Another thing I tried to do (but didn't have luck with, so I sorta gave up on it) was to use the onChange of the select to change the value of email display field. This way the page never reloads and I don't have to deal with that issue. I'm thinking the onChange might actually work, but I would need to execute javascript or something, and not just use an express <set/> command to set the value of the field name that displays the email text.
Does anyone have advice on how to make the values only load once? Or how to change the value on the onChange event?
Thanks!
Jim

Mike,
Thanks for the feedback. I actually did try that eventually. I created a variable in the form, and initialized that variable to the list of possible values. Then I referenced the variable in the 'allowedValues' of the select form item. At that point in time I still had the select box set as an action, so it would reload the page, hoping to reload the value in the email display field. This still did not work. Each time the action fired off, the variable was re-initializing itself. I eventually tried to put in a check, so it would not re-initialize itself if it had already been initialized. That caused a syslog error.
I ended up solving the problem using javascript. I changed the field that reported the potential email address to an html element. Then for the html attribute I made a div with an ID. I then set a line of javascript into the onChange attribute of the select form element. This worked when ever the select form value changed. I then added the same line of javascript to the onLoad attribute of the jsp pages body element. This worked for loading the page.
This solved the problem of the page reloading and the select getting new values. That still happens if you actually reload the page, but all the form elements work without the reload now.
Thanks!
Jim

Select length of value ?

Similar Messages

Maybe you are looking for