Select option menu overlapping thick box popup

Hi,
I am using thick box code for HTML popup. There are lot of selection boxes in every page. When i click the link to top open HTML popup, select options are overlapping in IE6. I know it won't work in IE6. i need to disabel the select options. But still if there is any other solution. Pl. let me know.
Thank
monu

Could you post your Screenshot and code.
There is "browse" icon above POST REPLY button, it helps to add your image.

Similar Messages

G5 Disk Utility won't let me select Options menu

I need to clean off my G5 to give it away. When I go to Disk Utilities, it won't allow me to select Options.

What options?

Getting select options in module pool screen

hi experts,
can any one suggest me how to provide select options in module pool screen.
thank you,
regards
vijay

Hi,
Take two fields on screen first for low value and other for high value (say vbeln_low and vbeln_high) also design a button next to the high textbox for select-option button used to display popup.
Using these two input fields append a range (say r_vbeln for vbap-vbeln) for the field to be used (either in query or anywhere).
ranges : r_vbeln for vbap-vbeln.
IF NOT vbeln_high IS INITIAL.
    IF NOT vbeln_low LE vbeln_high.
      MESSAGE e899 WITH text-007. "high value is smaller than low value
    ENDIF.
ENDIF.
r_vbeln-sign = 'I'.
r_vbeln-low = vbeln_low.
IF vbeln_high IS INITIAL.
    r_vbeln-option = 'EQ'. "if user takes only a singlr value
ELSE.
    r_vbeln-option = 'BT'. "if user takes both low & high value
    r_vbeln-high = vbeln_high.
ENDIF.
APPEND r_vbeln. "append range
CLEAR r_vbeln.
On the button click call this FM to call a popup for select-options.
DATA : tab TYPE rstabfield.
tab-tablename = 'VBAP'.
tab-fieldname = 'VBELN'.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
   EXPORTING
     title                   = text-002
     text                    = ' '
     signed                  = 'X'
*         lower_case              = ' '
*         no_interval_check       = ' '
*         just_display            = ' '
*         just_incl               = ' '
*         excluded_options        =
*         description             =
*         help_field              =
*         search_help             =
     tab_and_field           = tab
    TABLES
      range                   = r_vbeln
   EXCEPTIONS
     no_range_tab            = 1
     cancelled               = 2
     internal_error          = 3
     invalid_fieldname       = 4
     OTHERS                  = 5.
IF sy-subrc EQ 2.
    MESSAGE s899 WITH text-003. "no value selected
ELSEIF sy-subrc <> 0 AND sy-subrc <> 2.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
This whole code will append your range r_vbeln to be used in program.
Hope this solves your problem.
Thanks & Regards,
Tarun Gambhir

Select Option Custom Tag JQUERY

I have multiple select options on many of my pages, I just just added a jquery filter plugin to one of the select options i.e As User types on an input box the values in the select options gets filtered. This works very well now. How can I make it this into a custom Tag where it can be resused by all the select options on the site. That is the id of the select option and the input box has to be passed to the jquery to automtically filter the content of the Select Option. below is my jquery script.
<div>Filter<br>
    <input id="txtcomm" type="text" name="">
</div>
<div>
    <select id="slctcomm" multiple style="width:220px">
        <cfloop query="qryobjComm">
            <option value="#Comm#">#Comm#</option>
        </cfloop>
    </select>
</div>
<script>
    jQuery.fn.filterByText = function(txtcomm, selectSingleMatch) {
      return this.each(function() {
        var slctcomm = this;
        var options = [];
        $(slctcomm).find('option').each(function() {
          options.push({value: $(this).val(), text: $(this).text()});
        $(slctcomm).data('options', options);
        $(txtcomm).bind('change keyup', function() {
          var options = $(slctcomm).empty().data('options');
          var search = $.trim($(this).val());
          var regex = new RegExp(search,'gi');
          $.each(options, function(i) {
            var option = options[i];
            if(option.text.match(regex) !== null) {
              $(slctcomm).append(
                 $('<option>').text(option.text).val(option.value)
          if (selectSingleMatch === true &&
              $(slctcomm).children().length === 1) {
            $(slctcomm).children().get(0).selected = true;
    $(function() {
      $('#slctcomm').filterByText($('#txtcomm'), true);
</script>

Hi umuayo,
I guess you want pass the jquery selector for textbox and selectbox. I have created a file named filterByText.cfm which will act as customtag for me.
for more information regarding custom tag follow this link http://help.adobe.com/en_US/ColdFusion/9.0/Developing/WSc3ff6d0ea77859461172e0811cbec0b2e1 -7fff.html
In this example i have created custom tag in the same directory where I will use it. You can create it in different place also. Let us get into the main topic. I will pass the jquery selector for textbox and selectbox to the custom tag by "FilterId" and "slctcomm" attribute and inside customtag I will convert coldfusion valiable to javascript variable and use them to call your function.
dynamicselectbox.cfm
CODE:
<script src="http://code.jquery.com/jquery-latest.js"></script>
<cfquery name="getEmps" datasource="cfdocexamples">
    SELECT * FROM EMPLOYEE
</cfquery>
<div>Filter<br>
    <input id="txtcomm" type="text" name="">
</div>
<div>
    <select id="slctcomm" multiple style="width:220px" class="selclass">
        <cfoutput query="getEmps">
            <option value="#Emp_ID#">#FirstName#</option>
        </cfoutput>
    </select>
          <select id="slctcomm2" multiple style="width:220px" class="selclass">
        <cfoutput query="getEmps">
            <option value="#Emp_ID#">#FirstName#</option>
        </cfoutput>
    </select>
</div>
<cf_filterByText FilterId="##txtcomm" slctcomm=".selclass">
filterByText.cfm
Code:
<script type="text/javascript">
//get the jquery selector from attribute scope
          var filterId="<cfoutput>#Attributes.FilterId#</cfoutput>";
          var selectBoxId="<cfoutput>#Attributes.slctcomm#</cfoutput>";
    jQuery.fn.filterByText = function(txtcomm, selectSingleMatch) {
                    console.log(this);
                    var retvar;
        retvar = this.each(function() {
        var slctcomm = this;
        var options = [];
        $(slctcomm).find('option').each(function() {
          options.push({value: $(this).val(), text: $(this).text()});
        $(slctcomm).data('options', options);
        $(txtcomm).bind('change keyup', function() {
          var options = $(slctcomm).empty().data('options');
          var search = $.trim($(this).val());
          var regex = new RegExp(search,'gi');
          $.each(options, function(i) {
            var option = options[i];
            if(option.text.match(regex) !== null) {
              $(slctcomm).append(
                 $('<option>').text(option.text).val(option.value)
          if (selectSingleMatch === true &&
              $(slctcomm).children().length === 1) {
            $(slctcomm).children().get(0).selected = true;
            return retvar;
//call the function with the selector passed by user.
    $(function() {
      $(selectBoxId).filterByText($(filterId), true);
</script>
Thanks
Saurav

Start Firefox and homepage is not displayed; cannot navigate back to previously viewed pages using back or forward arrows; bookmarks toolbar not available on start-up though selected in options menu.

1. Start firefox and my homepage is not displayed--there is no webpage displayed on initial startup. A homepage is listed in the options menu. In order to see homepage I need to manually press the home icon to the right of the search box.
2. I am not capable of using the navigation arrows to the left of the address bar to navigate to previously viewed webpages. The arrows are present but are gray. Is there a setting in the security tab of the options menu that disables the navigation arrows for security purposes (i.e. not remembering webpages or cookies, etc.)?
3. Though the bookmark toolbar is selected in the options menu, the bookmarks toolbar is not visible when starting firefox. Instead there is a red firefox toolbar located at the upper left of the screen. In order to view the bookmarks toolbar I need to go into the options menu and de-select the bookmarks toolbar (causes the red firefox toolbar to disappear) and then re-select the bookmarks toolbar.
Any information to help correct these issues is greatly appreciated.
Mike

''framerotblues'' suggestion worked for me. I was having the following problems after 10.0 update:
>No back/forward buttons.
>Nothing in address bar.
>Bookmark toolbar would not automatically load. Even though it was checked as a toolbar to view, I had to uncheck and check it again every time I closed/opened Firefox.
>Could not access add-ons. Neither through menu toolbar nor using ctrl-shift-a
Restarted Firefox with add-ons disabled (help->restart with add-ons disabled). Removed ''Facebook Disconnect'' from add-ons. Restarted and everything seems to be working.

Select-options are not destroyed while calling view of used component popup

Hi Friends ,
I'm facing a unique problem. I'm calling a view of a component within another component. the view that I'm calling has some select-options. When I close the popup window ( using close 'X' of popup ) and then try to reopen the popup system give me a dump. I debugged and found that select-options are not destroyed by system and once it tries to create the select-options again it dumps because they are already there.
This is the source code extract of that dump for your reference .
1 method if_wd_select_options~add_selection_field.
2
3   data:
4     lr_table_descr       type ref to cl_abap_tabledescr,
5     lr_struct_descr      type ref to cl_abap_structdescr,
6     lr_value_field_descr type ref to cl_abap_elemdescr,
7     added_field          like line of mt_added_fields,
8     dfies                type dfies,
9     description          type string,
10     complex_restrictions type if_wd_select_options=>t_complex_restrictions.
11
12   field-symbols:
13     <it_result> type index table.
14
15 * check of someone wants to add a field that already exists
16   read table mt_fields
17        with key m_id = i_id
18        transporting no fields.
19   if sy-subrc = 0.
20 *   might be deleted - recreating a field with different setting is of course allowed
21     read table mt_all_removed_fields
22          with key table_line = i_id
23          transporting no fields.
24     if sy-subrc <> 0.
>>>       message x000(00).
26     endif.
27
28 *   remove the existing field in order to avoid duplicates
29     delete table mt_fields with table key m_id = i_id.
30   endif.
I've already tried using REMOVE_ALL_SEL_SCREEN_ITEMS( ) method of interface IF_WD_SELECT_OPTIONS before creating new elements ( select-options ). If any one can help me in this It would really help and I'll appreciate it.
Thanks in advance,
Laeeq

I've sloved the problem

Multiple select options in 1 drop down box?

Hi,
I have created a form that works perfectly except for the fact that I need to provide multiple select options in the 1 drop down box; for example, I'm asking what product the customer is interested in and his answer could be multiple items such as Soap, Sanitizer, Hand Towels, Face Cloths etc...
At the moment, the customer can only select 1 item not multiple.
Is this possible?
Thanks in advance for the help!

Hi,
It is not possible to allow the user to select multiple items in a dropdown list.
You could use a list box, which does allow multiple selections.
Good luck,
Niall
Assure Dynamics

How to get the current selected value of a combo box or a option button?

Hello All,
I want to catch the current selected value of a combo box and also of a option button and want save it into different variables in my code. These option button and combo box are in a SAP business one form which I have created through VB dot.net coding.
But I don't know how to do that, can any one send any example code for this.
Regards,
Sudeshna.

Hi Sudesha,
If you want to get the selected values you can do it as follows: The Combo Box value you can get from the combo box. If you want to get it on the change event, you must make sure that you check when BeforeAction = False. If you want to get an Option Button value you should check the value in the data source attached to the option button.
        Dim oForm As SAPbouiCOM.Form
        Dim oCombo As SAPbouiCOM.ComboBox
        Dim oData As SAPbouiCOM.UserDataSource
        oForm = oApplication.Forms.Item("MyForm")
        oCombo = oForm.Items.Item("myComboUID")
        oApplication.MessageBox(oCombo.Selected.Value)
        oData = oForm.DataSources.UserDataSources.Item("MyDataSourceName")
        oApplication.MessageBox(oData.ValueEx)
Hope it helps,
Adele

Hiding of Select Options in screen based on selection in selection list box

Hi People,
         I have a screen where i have put a selection list box, it is pre-filled with values, Now based on the value which user selects, I want to show/hide some select-options fields. I have declared the select options in the top include of my program,
SELECT-OPTIONS: so_user FOR ls_rsp_user-user_id MODIF ID 222,
                so_userg FOR ls_rsp_usergrp-user_grp_id MODIF ID 333,
                so_ccode FOR ls_vdmp-bukrs MODIF ID 444,
then in the PBO of my screen, I have written a module, set screen in which I loop over screen & check the group id's
LOOP AT SCREEN.
    IF screen-group1 = '111'.
      IF gv_hier_resp_fields_flag IS NOT INITIAL.
        screen-active = 1.
      ELSE.
        screen-active = 0.
      ENDIF.
    ELSEIF screen-group1 = '222'.
      IF gv_user_fields_flag IS NOT INITIAL.
        screen-active = 1.
      ELSE.
        screen-active = 0.
      ENDIF.
    ELSEIF screen-group1 = '333'.
      IF gv_user_group_fields_flag IS NOT INITIAL.
        screen-active = 1.
      ELSE.
        screen-active = 0.
    ENDIF.
MODIFY SCREEN.
ENDLOOP.
I am setting some flags based on the value which user selects in the selection list box, When I debugged I found that the flags were being set correctly, but the screen group value never set to '222' or '333', these are id's i have used for select options. Hence I am unable to hide/show the select options fields. Kindly suggest some solutions for this.
Thanks & Regards,
Deepak

then in the PBO of my screen
Your SELECT-OPTIONS are defined in a SELECTION-SCREEN so the PBO actions must be maintained in a AT SELECTION-SCREEN OUTPUT block.
I suppose the selection-screen is a subscreen, if you dont want to get unwanted interactions with a main selection-screen of the report, check sy-dynnr
AT SELECTION-SCREEN OUTPUT.
   CASE sy-dynnr.
     WHEN '1000'. " main screen of report
     WHEN '0100'. " selection-screen defined as subscreen
       LOOP AT SCREEN.
         CASE SCREEN-GROUP1.
           WHEN '111'.
         ENDCASE.
       ENDLOOP.
   ENDCASE.
Regards,
Raymond

Create Popup like Select options

Hi at all,
I want to create a button that calls a popup like in the select options, without using the select options component.
In Standard ABAP there is a function called "COMPLEX_SELECTIONS_DIALOG" who creates and call the dialog.
Does anybody know an adaption for this function in Web Dynpro for ABAP?
Thx a lot to all.
Dirk

Hello Dirk,
We have a new enhacement in code wizord by which you could replicate a screen into a webdynpro view.
So the framework would choose different ui elements to create similar screen,
Regards
Anurag Chopra

File Upload/Menu Select Option

I have a form that needs to have a combination of a file
upload or a menu select option. The client I have been
working with wants to use an insert form to insert a new
record. If the file that they want doesn't have the filename
their looking for in the menu list, they want to use the
option of uploading a file. I'm having trouble combining the
processing script for this and was wondering if anyone can
help me put this together; it's an interesting challenge.
PHP:
$editFormAction = $_SERVER['PHP_SELF'];
if (isset($_SERVER['QUERY_STRING'])) {
$editFormAction .= "?" .
htmlentities($_SERVER['QUERY_STRING']);
if ((isset($_POST["MM_insert"])) &&
($_POST["MM_insert"] ==
"form1")) {
define('UPLOAD_DIR', '../../photos/staff/');
$file = str_replace(' ', '_',
$_FILES['staff_photo']['name']);
$permitted = array('image/gif', 'image/jpeg',
'image/pjpeg', 'image/png');
$typeOK = false;
foreach ($permitted as $type) {
if ($type == $_FILES['staff_photo']['type']) {
$typeOK = true;
break;
if ($typeOK) {
switch($_FILES['staff_photo']['error']) {
case 0:
if (!file_exists(UPLOAD_DIR.$file)) {
$success =
move_uploaded_file($_FILES['staff_photo']['name'],
UPLOAD_DIR.$file);
if ($success) {
$insertSQL = sprintf("INSERT INTO staff (staff_name,
staff_position, staff_subposition, staff_desc, staff_photo,
staff_spec_1, staff_spec_2, staff_spec_3, staff_spec_4,
staff_spec_5) VALUES (%s, %s, %s, %s, %s, %s, %s, %s, %s,
%s)",
GetSQLValueString($_POST['staff_name'], "text"),
GetSQLValueString($_POST['staff_position'], "text"),
GetSQLValueString($_POST['staff_subposition'], "text"),
GetSQLValueString($_POST['staff_desc'], "text"),
GetSQLValueString($_POST['staff_photo'], "text"),
GetSQLValueString($_POST['staff_spec_1'], "text"),
GetSQLValueString($_POST['staff_spec_2'], "text"),
GetSQLValueString($_POST['staff_spec_3'], "text"),
GetSQLValueString($_POST['staff_spec_4'], "text"),
GetSQLValueString($_POST['staff_spec_5'], "text"));
mysql_select_db($database_wvgsadmin, $wvgsadmin);
$Result1 = mysql_query($insertSQL, $wvgsadmin) or
die(mysql_error());
if ($Result1) {
$insertGoTo = "staff_list.php";
if (isset($_SERVER['QUERY_STRING'])) {
$insertGoTo .= (strpos($insertGoTo, '?')) ? "&" : "?";
$insertGoTo .= $_SERVER['QUERY_STRING'];
header(sprintf("Location: %s", $insertGoTo));
} else {
$result = "Error uploading $file. Please try again.";
break;
case 3:
$result = "Error uploading $file. Please try again.";
default:
$result = "System error uploading $file. Contact
webmaster.";
} else {
$result = "$file cannot be uploaded. Acceptable file
type: .gif, .jpf, .png";
HTML FORM:
<form method="post" name="form1"
enctype="multipart/form-data" action="<?php echo
$editFormAction; ?>">
<table width="80%" align="center" cellspacing="0"
border="0">
<tr valign="baseline">
<td nowrap align="right">Select Photo:</td>
<td><select name="staff_photo">
<option selected="selected"></option>
<?php buildImageList('../../photos/staff/'); ?>
</select>
<span class="small"> (If
there is no photo
available, please choose 'No-Phot-Available.jpg' or 'No
photo')</span></td>
</tr>
<tr valign="baseline">
<td nowrap align="right">Upload Photo: </td>
<td><input name="staff_photo" type="file" />
</td>
</tr>
<tr valign="baseline">
<td nowrap align="right"> </td>
<td><input type="submit" value="Insert
record"></td>
</tr>
</table>
<input type="hidden" name="MM_insert" value="form1">
<input name="staff_photo" type="hidden" id="staff_photo"
/>
</form>

In this case, I think you might need to
1) Create a transient attribute in the VO.
2) Either create a method in AM to get the file id based on the attachment entity name/id(using PL/SQL) and set the view attribute accordingly
or call a PL/SQL procedure to get the file id in the getter method of the transient attribute.
Look at this forum entry to get the file id.
How to display Attachments on OAF page for different entities
Regards,
Peddi.

Overlapping of an Select-Option Field and the Extension Button.

Hi,
I have declared a Select-Option as follows:
Tables: agr_define .
select-options: s_role for agr_define-agr_name obligatory
no intervals .
It is not throwing any error.
If I execute this program, On the selection screen, I find one field where I can enter the Role and an extension button to enter multiple roles.
But the F4 help overlaps on the Extension Button and the customer wants this overlapping to be removed, I mean this F4 help button and the Extension button should not overlap with each other.
Can you help me acheive this.
Thanks and Regards,
Ishaq.

Boss,
You cannot avoid that overlapping.
yes, one can change the system screen 1000.
but, in future it will definitely create problems like if you add any extra field and if are using that code in some other server it will never get reflected.So, will you go to Screen 1000 of that server and change the screen attributes again??
okay even i would like to find the answer for that.
If you find the solution, do send me the real answer in this same thread.

List box for the select-options

Hi All
Can anyone send me a sample code to create a list-box for the select-options.

Hi vighnesh vasudevan,
Do like this for your select options for low and high also.
Parameters:
    p_quat TYPE char20
            AS LISTBOX VISIBLE LENGTH 30
            LOWER CASE OBLIGATORY.
*              AT SELECTION-SCREEN ON VALUE-REQUEST                    *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_quat.
PERFORM fill_quarters.
PERFORM display_quarters.
*&      Form fill_quarters
*       text
FORM fill_quarters .
DATA:
* Field string to fill quarters in the year
    lfs_quarters TYPE LINE OF vrm_values.
REFRESH t_quarters.
lfs_quarters-key = '1'.
lfs_quarters-text = text-qu1.
APPEND lfs_quarters TO t_quarters.
lfs_quarters-key = '2'.
lfs_quarters-text = text-qu2.
APPEND lfs_quarters TO t_quarters.
lfs_quarters-key = '3'.
lfs_quarters-text = text-qu3.
APPEND lfs_quarters TO t_quarters.
lfs_quarters-key = '4'.
lfs_quarters-text = text-qu4.
APPEND lfs_quarters TO t_quarters.
ENDFORM.                    " fill_quarters
*&      Form display_quarters
*       text
FORM display_quarters .
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id              = 'P_QUAT'
      values          = t_quarters[]
    EXCEPTIONS
      id_illegal_name = 1
      OTHERS          = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " display_quarters
Note: I think we are not able to display the list box for select options because i am not ever seen the list box in select options . No Probs try like above code.
See the following like it may help for you
Listbox for Select Options
Regards,
Mahi.

Two options in select list menu

Let's say I have a select (list/menu) and I've added a dynamic source to it.
The menu will show a list of names. However, in the database the names are stored in two tables:
first_name
last_name
I don't want the list to just show last names because what if more than one person has a last name, how would you know who is who?
So, I've tried to get it to show the first and last name.   Here is the code with just a last name showing:
<label for="employees"></label>
            <select name="employees" id="employees">
              <?php
do {
?>
              <option value="<?php echo $row_getEmployee['employee_id']?>"><?php echo $row_getEmployee['lastname']?></option>
              <?php
} while ($row_getEmployee = mysql_fetch_assoc($getEmployee));
$rows = mysql_num_rows($getEmployee);
if($rows > 0) {
      mysql_data_seek($getEmployee, 0);
            $row_getEmployee = mysql_fetch_assoc($getEmployee);
?>
          </select>
The important part being:
I tried changing this:
<option value="<?php echo $row_getEmployee['employee_id']?>"><?php echo $row_getEmployee['lastname']?></option>
to this:
<option value="<?php echo $row_getEmployee['employee_id']?>"><?php echo $row_getEmployee['firstname' . 'lastname']?></option>
but that only showed the first letter of each last name and nothing else.
So - does anyone know how I could do this?

Ok, first my standard disclaimer - I do not know PHP. But it seems to me that you can't include both column names in one call to the recordset. Try this instead:
<option value="<?php echo $row_getEmployee['employee_id']?>"><?php echo $row_getEmployee['firstname']." ".$row_getEmployee['lastname']?></option>
However, I would probably do my concantenation in the SQL select instead.

Adobe LiveCycle Designer 7.0 - Don't have Multiple Select option for List Box

I've created a form and need to add a List Box that will allow the user to select Multiple items in the box. I do not have the option under the Object property to set this option. Can anyone explain why I don't have this option and how I can activate it?

Ian,
I don't know if you can use a PDF form to do an HTTP upload of a file. You can use an image field to allow a user to browse for a GIF, TIF, JPG, or PNG and include that in the submitted XML, but I don't know if it's possible to do something similar for other file types. I doubt it. PDF does support file attachments, but that functionality requires the user to have Acrobat or the PDF has to have usage rights enabled using Adobe Reader Extensions Server. Even if you assume that all your users have Acrobat though, attaching files in this way doesn't get the file into the XML form data like an image field does.

Select option menu overlapping thick box popup

Similar Messages

Maybe you are looking for