Select Outbound Line by Pressing Line Key on Phone

I have an Elastix installation. I have two Cisco spa525G2 phones and I need to setup the following on the phone and was hoping someone could help me or point me in the right direction. I've been reading the Cisco documentation, but I am getting more confused by the minute. The closest I could get was this from the Cisco forums...
"If you choose to deploy a SPA400 in an Asterisk environment, you will need to define which SPA400 line to use. This document describes how to accomplish this.
exten => 6XXXXXXXX,1,Dial(SIP/L2{EXTEN},20)
By setting Ln string before an extension in the INVITE, where "n" is the line number on the SPA400, one can choose which line to route the call to (in the previous example it goes to Line 2). If not using Ln, the call will end up on first available line (the SPA400 is then treated like a trunk). This has been tested to work with 1.1.2.2 SPA400 firwmare."
I need the user to be able to press one of the Line Key buttons, then dial a phone number which will then route the call out the correct outbound route based on the line key pressed. I already have the trunks and Outbound Routes setup and working by dialing "9" or "5" before the number. I just need to setup the phones Line Key buttons correctly.
I would greatly appreciate any help you could provide.
Thanks in advance!
Spencer

Just a few updates, I still have the issue, but it also happens in Outlook sometimes (not very often) when I write emails. So it might not be linked to Adobe Reader at all.
Is there a common composant that both Outlook and Adobe use to select text?
Additional information: It's not just the text selection I cannot do in Adobe Reader, it's everything that need the mouse to move while left button is pressed. For example, I cannot move the separator between bookmarks and document.
So could it be an issue with the mouse/keypad driver (from Dell)?
I'm just dumping information in case someone else has the same issue, hopefully google will lead them here and they will know they are not alone.

Similar Messages

Delete Selected JList Item on Pressing Delete Key

Hi,
I have to delete selected JList item ((in JFrame using java Swing) after pressing Delete key. Please provide me code for this.
Thanks
Nitin

Again read the Swing tutorial on [url http://java.sun.com/docs/books/tutorial/uiswing/components/list.html]How to Use Lists and [url http://java.sun.com/docs/books/tutorial/uiswing/misc/keybinding.html]How to Use Key Bindings.
Are you sensing a common theme here? Do some reading on your own. The tutorial has most of the information you need.

RE: PRESSING ENTER KEY TO MOVE TO A NEW LINE INSTEAD OF SENDING TEXT MESSAGE ON Q5

I'd rather use the enter key to move to a new line than to send message. I previously used this on curve 9300 and I'm frustrated right now I'm unable to figure how to move to the next line on this Q5. I thought the Q5 will be an improvement on the curve. I'll will be disappointed if there is no way about this. Can somebody help please?
Solved!
Go to Solution.

Hi curio
From Blackberry Hub, tap three dots at bottom right > Setting > Text Messages > Use enter key to send > OFF. It will make a new line if you press enter key.
• Click Likes to appreciate those who helps you
• If your issue solved, mark the best post in your thread as Solution

"Always Use Selected Format" check box in line items report

Hi Experts,
I have an issue in ECC 6.0.
From the transaction code FBL1N (Vendor Line Items) I am trying to export the report to spreadsheet by selecting the option List> Export>Spreadsheet then I have selected "Always Use Selected Format" check box. But if I execute the same report again I am not getting this option "Always Use Selected Format". Please let me how can we retrieve that option. Is there any possibility to get that option again either functionally or technically. I would like to know all the possible ways to get this option again.
Please do the needful.

Hello,
In one my thread Mr. Frank has replied as follows. I believe he has solved this.
Hope this may be really helpful.
The problem with the spreadsheet download is at one point, users have selected their default file type.
That said, SAPGUI is working as it should. (gui710)
Question though is how do we reset the values so they get the ?Select Spreadsheet Format? popup again.
The following steps should be performed :
- Call transaction SE38, enter program SALV_BS_ADMIN_MAINTAIN, and press F8.
- Follow the parameters below :
- Select ?DELETE? on the Actions Group
- Select ?DETAILED SELECTION? on the General Data :
- On Client - your number
- User : <user name>
-Hit EXECUTE.
-Press ENTER on the POPUP
- If there is an entry in the report that will need to be deleted. Also, make sure that the entry you will delete (for the user) has a value of GUI_ALV_XML_VER on field ?Parameter? .
- Select the line and hit the DELETE icon .
- Press ?Y? to continue delete. Press ENTER on the popup.
- Then EXIT all the way out of the program.
NOTE : When you run program SALV_BS_ADMIN_MAINTAIN, make sure they are out of any program that they are using for download.
Re: "Always Use Selected Format" check box in line items report
Regards,
Ravi
Edited by: Ravi Sankar Venna on May 15, 2009 2:31 PM

Generate 2 line items with posting keys in same table while using FM .

Dear Expert ,
For T-code f-65 ,I have to park a FI Document .i tried with PRELIMINARY_POSTING_FB01 for parked Document . But i am not successfully park the document .
with the help of F-65 the data Segregate between Tables VBSEGS and VBSEGD with respecting Posting key . but with this Fm entire entry is displaying in table VBSEGS .For example it generated two line items with posting keys '15' and '40' and these both are displayed in VBSEGS whereas posting key '15' has to be displayed in VBSEGD.
when i check this Document in FBV0 Error reflect " G/L Account 0012000 1001 Does not Exist ".
Here my code -
DATA:   XT_BKPF LIKE BKPF OCCURS 0 WITH HEADER LINE ,
        XT_BSEG LIKE BSEG OCCURS 0 WITH HEADER LINE ,
        XT_BSEG1 LIKE BSEG OCCURS 0 WITH HEADER LINE ,
        XT_BSEC LIKE BSEC OCCURS 0 WITH HEADER LINE ,
        XT_BSET LIKE BSET OCCURS 0 WITH HEADER LINE ,
        XT_BSEZ LIKE BSEZ OCCURS 0 WITH HEADER LINE ,
        XT_BKORM LIKE BKORM OCCURS 0 WITH HEADER LINE ,
        XT_THEAD LIKE THEAD OCCURS 0 WITH HEADER LINE ,
        XT_SPLTTAB LIKE ACSPLT OCCURS 0 WITH HEADER LINE ,
        XT_SPLTWT LIKE WITH_ITEMX OCCURS 0 WITH HEADER LINE .
DATA :    XTEXT_UPDATE LIKE BOOLE-BOOLE VALUE SPACE,
          XTEXT_ITEM_UPDATE LIKE BOOLE-BOOLE VALUE SPACE,
          XI_UF05A LIKE UF05A,
          XI_XCMPL TYPE XFELD VALUE 'X',
          XFS006_FB01 LIKE FS006 ,
          XI_TCODE LIKE T020-TCODE VALUE 'F-65',
          XI_PARGB LIKE RF05A-PARGB        ,
          XI_TCODE_INT TYPE TCODE           .
DATA P_RETURN LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE.
XT_BKPF-BUKRS     =     'CP01'.
XT_BKPF-GJAHR     =     2011.
XT_BKPF-BLART     =     'DZ'.
XT_BKPF-BLDAT     =     SY-DATUM.
XT_BKPF-BUDAT     =     SY-DATUM.
XT_BKPF-MONAT     =     '06'.
XT_BKPF-CPUDT     =     SY-DATUM.
XT_BKPF-WWERT     = SY-DATUM.
XT_BKPF-USNAM     =     'ABAPER'.
XT_BKPF-TCODE     =     'F-65'.
APPEND XT_BKPF.
XT_BSEG-BUKRS     =     'CP01'.
XT_BSEG-GJAHR     =     '2011'.
XT_BSEG-BUZEI = '001'.
XT_BSEG-BSCHL = '40'.
XT_BSEG-KOART = 'S'.
XT_BSEG-SHKZG = 'S' .
XT_BSEG-GSBER     =     'CPLN'.
XT_BSEG-BUPLA = 'CP01'.
XT_BSEG-WRBTR     =     10000.
XT_BSEG-PSWSL = 'INR'.
XT_BSEG-ZUONR = 'CH. 123456'.
XT_BSEG-HKONT = '241000'.
APPEND XT_BSEG .
CLEAR XT_BSEG.
Vendor line item - required even for header only - BSEG table
XT_BSEG-BUKRS     =     'CP01'.
XT_BSEG-GJAHR     =     '2011'.
XT_BSEG-BUZEI = '002'.
XT_BSEG-BSCHL = '15'.
XT_BSEG-KOART = 'S'.
XT_BSEG-SHKZG = 'H' .
XT_BSEG-GSBER     =     'CPLN'.
XT_BSEG-BUPLA = 'CP01'.
XT_BSEG-WRBTR     =     10000.
XT_BSEG-PSWSL = 'INR'.
XT_BSEG-ZUONR = 'CH. 123456'.
XT_BSEG-HKONT = 'PC04000001'.
APPEND XT_BSEG .
CLEAR XT_BSEG.
CALL FUNCTION 'PRELIMINARY_POSTING_FB01'
   EXPORTING
     TEXT_UPDATE            = XTEXT_UPDATE
     TEXT_ITEM_UPDATE       = XTEXT_ITEM_UPDATE
I_UF05A                =
     I_XCMPL                = XI_XCMPL
FS006_FB01             =
      I_TCODE                = XI_TCODE
I_PARGB                =
I_TCODE_INT            =
IMPORTING
    XEPBBP                 = CHECK_A
    TABLES
      T_BKPF                 = XT_BKPF
      T_BSEG                 = XT_BSEG
      T_BSEC                 = XT_BSEC
      T_BSET                 = XT_BSET
      T_BSEZ                 = XT_BSEZ
T_BKORM                =
T_THEAD                =
T_SPLTTAB              =
T_SPLTWT               =
          EXCEPTIONS
            ERROR_MESSAGE = 1.
P_RETURN-ID         = SY-MSGID.
P_RETURN-TYPE       = SY-MSGTY.
P_RETURN-NUMBER     = SY-MSGNO.
APPEND P_RETURN.
     p_return-MESSAGE_V1 = XSYMSGV.
IF SY-SUBRC = 0.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
        WAIT = 'X'.
ENDIF.
WRITE :/ sy-subrc , sy-MSGV1 .
Thanks ,
Ashish Gupta

Hi Raghuram,
I found a very important SAP Note 103051, details are below.
An IDoc processed by function module IDOC_INPUT_INVOIC_MM (of category INVOIC01) must not refer to the same purchase order item in several invoice items. This is also valid if for a goods receipt-related invoice verification several delivery notes belong to the same purchase order item.
Depending on the system settings and the situation, various error messages can occur (for example, FD240 'Order item ... selected more than once' or M8050 'Balance not zero: & debits: & credits: &').
In this situation module IDOC_INPUT_INVOIC_MRM generates error message M8321 'Document contains same order item more than once'.
For example, this situation occurs if you work with individual batch valuation and the SD billing document executes a batch split for different batches which belong to the same purchase order item and delivery.
Other terms
INVOIC, SAPLIEDI, M8047, M8, 321
Reason and Prerequisites
This is because of the program design.
Solution
There is no solution for IDOC_INPUT_INVOIC_MM.
Module IDOC_INPUT_INVOIC_MRM (only as of Release 4.0) for the logistics invoice verification can distinguish different goods receipts by means of the delivery note number. For this purpose, GR-related invoice verification must be active.
Owing to this symptom, billing documents for single batch valuation with batch split cannot be settled in MM-EDI inbound processing. The settlement generates exactly the situation described (several invoice items for the same purchase order item). In this case, the only solution is to deactivate the billing of the batch sub-items in SD Customizing and to calculate the main item only.
Hope this helps.
Reward if helpful.
Thanks

I want to eliminate an autofill choice that pops up when I sign into yahoo using the Firefox browser. I tried yahoo help which said hover over the unwanted line and press delete, but that did not work. I am using a Mac if that makes a difference.

Question
I want to eliminate an autofill choice that pops up when I sign into yahoo using the Firefox browser. I tried yahoo help which said hover over the unwanted line and press delete, but that did not work. Do you know how I can get rid of this autofill? I am using a Mac if that makes a difference. Thanks.

Use Shift+Delete on Mac.
*http://kb.mozillazine.org/Deleting_autocomplete_entries
*Click the (empty) input field on the web page to open the drop down list
*Highlight an entry in the drop down list
*Press the Delete key (on Mac: Shift+Delete) to remove it.

How to view the first and the last frame of a clip or a selected range in the time line?

How to view the first and the last frame of a clip directly or in a selected range in the time line ? Up arrow and down arrow keys changes only between the first frame of the consecutive clips. Even ; and ' does the same. I mean what is the shortcut keys for first to last and last to first frame of a clip? Help please.

SELECT PurOrderNum,
OrderDate
FROM
SELECT PurOrderNum,
OrderDate,
MAX(OrderDate) OVER (PARTITION BY DATEDIFF(mm,0,OrderDate)) AS MaxDate,
MIN(OrderDate) OVER (PARTITION BY DATEDIFF(mm,0,OrderDate)) AS MinDate
FROM Purchasing.PurOrder
WHERE OrderDate >= '2013-02-28'
AND OrderDate <= '2014-12-29'
)t
WHERE OrderDate = MaxDate
OR OrderDate = MinDate
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

ST.Line Mid month dep Key

Guys,
I need to configure a st.line mid month depreciation key for our 39 year building asset for area AMT & ACE, The standard key ACM is not producing the correct calculation.If I assign this key the following calculation is coming up ,
APC=26.171.89 Life:39 years, Acq date:12/10/2009( as per our FSV its our 2010-period 1)
dep is caculated as $335.54, which is half of the year's dep which should be $671.08, where as we want to have $671.08
for first year. What do I need to chnage in that key??.
Regards
Shaun

Paul,
we are using fiscal year variant from DEC-NOV and as of 11.30.2010 is our period 12,the last period of the year.and our fiscal periods doesnt correspondence to calender year.so now standrad key ACM with period control 06(03/03/03/03) calculating just st line in first year , which is $ 671.08, not $ 6433.11 which is mid month calculation .but its not happening ,any other idea in period control that could give me that mid month convention to work.but thanks for your helpo ,u been a great help to me ,I assigned full points to you.
Regards
Shaun

How can i select the next column instead of next row when press enter key

I need to know how can i select the next column instead of next row when i press the enter key.By default ,when i press enter key the next row is selected and the column remain unchanged but I wants opposite that is the row should remain unchanged but column index will changed.
Thanks to all.

Well, the right arrow key will already move you to the next column, so the easiest way to do this is to modify the InputMap to have the Enter key invoke the same Action as the right arrow key.
You can search the forum for my "Table Actions" (without the space) example that will show you how to do this.

Select first word in each line of a text file to do something.

How do I select the first word in each line to do something newer from a text file in Powershell?
Example:
GBL Primary File
local Primary File
localhost Primary File
Opstest Primary File
TrustAnchors Primary File
99upgrade

Hi 99,
here's an example on how to do it:
$lines = Get-Content "C:\ExampleFolder\Example.txt"
foreach ($line in $lines)
Write-Host ($line.Split(" "))[0]
Just replace the Write-Host line in the loop with what you actually want to do with the first word in the line.
Cheers,
Fred
There's no place like 127.0.0.1

Select multiple, press ctrl key

Hi experts,
Can we create a fields with 6 options. Instead of using a picklist, the user request to allow "Select multiple, press ctrl key". i.e. you see all the 6 options under the field in a single view, then select > press control > system will automatically highlighted the selected fields.
Thanks.
Sab.

Sab,
Are you asking about a multi-select picklist. It's a picklist field that allows you select multiple values? Yes you can create those but do a search as there is a posting on all the limitations to these fields at the moment.
cheers
Alex

When i try and open a tab that is the same as the page im currently on i closes it self. not when i type the full address, but when i use the arrow keys to select the url and press enter

when I try and open a tab that is the same as the page I'm currently on it closes it self. Not when I type the full address, but when I use the arrow keys to select the url and press enter. I just don't like typing in the same address 5 times, when the older Firefox worked.

Hi
AutoPunch enabled? Command click in the bottom half of the Bar Ruler to turn it off
CCT

Select multple rows in ALV without pressing pressing CTRL key

Hi experts,
Is there any way that I can select multple rows in an ALV without pressing pressing CTRL key?
I am using set_table_for_first_display method for displaying the ALV.
I tried different options of sel_mode, but none of them works without the CTRL key.
Thanks,
Mohit.

Hi,
You can add checkbox using ALV grid display.
Call your ALV grid as below. Pass 'wa_layout' with 'WA_LAYOUT-BOX_FIELDNAME' as your selection column name.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
        I_CALLBACK_PROGRAM       = SY-REPID
        I_CALLBACK_PF_STATUS_SET = 'F_GUI_STATUS'
        I_CALLBACK_USER_COMMAND = 'F_USERCOMMAND'
        I_GRID_TITLE             = TEXT-026
        IS_LAYOUT                = WA_LAYOUT
        IT_FIELDCAT              = I_FIELDCAT
      TABLES
        T_OUTTAB                 = I_OUTTAB
      EXCEPTIONS
        PROGRAM_ERROR            = 1
        OTHERS                   = 2.
Check below link for more help.
[http://www.sapfans.com/forums/viewtopic.php?t=40968]
Thanks,
Archana

Query 0: Runtime error There is already a line with the same key. with para

Dear all,
I have a query with several variables. One of the variables is Version. When I use certain values e.g. 1,2 or 3, I can generate the query without any problem. However, when I use the other values e,g, 4, 5, or 6, the query gives me with the following error messages :
1. Query 0: Runtime error There is already a line with the same key. with parallel processing via RFC
2. Error while reading data; navigation is possible
3. >> Row: 174 Inc: LRSDRPU02 Prog: SAPLRSDRP
Error 1
Query 0: Runtime error There is already a line with the same key. with parallel processing via RFC
Message no. DBMAN428
Error 2
Error while reading data; navigation is possible
Message no. BRAIN289
Diagnosis
An error occurred while reading the data. The query result is therefore empty or inconsistent and is not buffered in the OLAP cache.
Procedure
You can continue to navigate or return to the last navigation step.
Error 3
>> Row: 174 Inc: LRSDRPU02 Prog: SAPLRSDRP
Message no. RS_EXCEPTION301
Diagnosis
En error has been triggered. This message specifies where in the coding the error occurred. This helps you to localize the error quickly.
May I know what causes this error and how to troubleshoot it?
Thank you.

Venkat,
You are either a genius or working for SAP.
In any case, your solution solved my problem.
Thanks heaps!

2011 macbook pro 15' -Taking so long to see the select menu when I press the option key

I keep pressing option key and try to choose which hard drive I would like to boot, here is the problem. If I connect with network cable then I'll have to wait almost 2 minutes to show the select screen!!! On the other hand, If I didn't connect the network cable, I only take 11 seconds to see that select screen. I have tested over ten times with or without connected my macbook pro to the network cable, and the result is the same as I mentioned above. So...what's the problem? Is that a bug in 10.6.7 or It's a hardware problem.... Anyone help plz ?????

Its a keyboard shortcut to mirror or un mirror screen. Then you can use your mouse and what not. My macbook air fell about 1.5 feet to carpet and thanks to the thin design of the metal parts turned the dam n screen into a knife and sliced the wires for the screen, wifi, Bluetooth, and camera... Well one wire was still attached, the one that powered the screen. So all i had was a white screen. I know its accidental damage and all but to have it fall and break a week after my warranty ran out ***?!?! Apple must employ ninjas!

Select Outbound Line by Pressing Line Key on Phone

Similar Messages

Maybe you are looking for