Select Printer and its Settings

I have two printers connected to my computer, a laser and an inkjet, and whilst I normally use the inkjet (the default printer) when I want to print double sided I use the laser.
At the moment I have to select the printer, set its properties and print.
I am wondering, is it possible to put a button on an Adobe Acrobat Form to (a) select the printer and (b) set the properties of that printer?
If it is possible where would I find information to assist?
Many thanks
David

If you always use the printer in the same way, why not simply go to Start>Printers and select your printer, right click, and get the properties. Then set the double sided and such there so it is the default of your system. What you are asking is not common for software. Another option would be to copy your drive printer to a printer instance and set that one with the preferences you use just for Acrobat. That way you are again set, but might select the printer LJpdf or such.

Similar Messages

Hi All, I setup 2 Mac Minis, 'setup in a no-apple id. Now with Mini1 I installed a shared printer from Windows7 Pc it ask for credentials then I input Adminstrator account and the password ticking the remember in "keychain" I run a test print and its se

Hi All,
I setup 2 Mac Minis, 'setup in a no-apple id. Now with Mini1 I installed a shared printer from Windows7 Pc it ask for credentials then I input Adminstrator account and the password ticking the remember in "keychain"
I run a test print and its seamless. I reboot the Mini1 and run test print again and its good.
Now in Mini2 I did the same installation on shared printer but it is asking for user credential again and again, there is a check mark in "remember in keychain but still gives a notice that "requires authentication" I put the admin creadentials same with Mini1 then it prints.
every time I print on Mini2 its always asking for a user & password before Printing. How can we fix it.
I tried
- lpd printing = "authentication required"
- reset printer settings ang re-install printer = "authentication required"
- replace sharename in windows7, reinstall printer in Mini2 = "authentication required"
This stuff never happened to Mini1.

Hi All,
I setup 2 Mac Minis, 'setup in a no-apple id. Now with Mini1 I installed a shared printer from Windows7 Pc it ask for credentials then I input Adminstrator account and the password ticking the remember in "keychain"
I run a test print and its seamless. I reboot the Mini1 and run test print again and its good.
Now in Mini2 I did the same installation on shared printer but it is asking for user credential again and again, there is a check mark in "remember in keychain but still gives a notice that "requires authentication" I put the admin creadentials same with Mini1 then it prints.
every time I print on Mini2 its always asking for a user & password before Printing. How can we fix it.
I tried
- lpd printing = "authentication required"
- reset printer settings ang re-install printer = "authentication required"
- replace sharename in windows7, reinstall printer in Mini2 = "authentication required"
This stuff never happened to Mini1.

HT201401 What you sent me does not help me right My problem is the hardware of the iPhone and its settings I have a problem I Cmtor Home is not where his curve and let's make noise and not working

Hello my name is and I'm from Israel Lidor My home button on the iPhone 5 does not pass he makes heads and crooked, I bought it from Apple in Spain Barcelona If you can do something with this issue Nora will thank you.!
What you sent me does not help me right
My problem is the hardware of the iPhone and its settings
I have a problem I Cmtor Home is not where his curve and let's make noise and not working

The warranty is NOT international. The exception is the E.U.
Since Spain is an E.U. Member country, you can take it back to an Apple Store in any EU country for service. It can not be serviced outside of the E.U.

HT4199 I was trying to fax from my iMac to my HP office jet 8600, ran into a snag, so Ithough I would just print the document , then fax it from printer. I hit print and its telling me its offline, how do I correct this issue?

Hi, I tried to make my first fax from the imac, I went into apple pref. to print and scan to change printer but could not get it to fax.
So I thought I would just print the document place it on the HP Officejet 8600 and fax that way. Now its stuck on print stating I am offline?
How do I correct this issue?
Thanks..

Hello,
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7/10.8 instructions...
In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
if you hold option and click the "-" tab it resets the printing system.
http://www.macosxhints.com/article.php?story=20031215144430486
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
    1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
    2.    Choose System Preferences from the Apple menu.
    3.    Choose Print & Fax from the View menu.
    4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..."       As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot.

Im using HP laserjet M1120N MFP printer and its required WIA driver.

hi,
im using HP laserjet M1120N MFP printer.
last time i dont have any issues to printer or scan, and lately i cant scan
and only able to print out.
its required me have WIA driver. anyone know how to fix its.
thanks

Hello zuzack97,
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

IPhoto Printing and Default Settings

Help would be appreciated. All of sudden, with no other changes to my computer or my printer, when I try to print a photo to 4x6, 5x7, etc sized photo paper, the print is oriented to portrait, rather than to landscape. Can't find any settings to change the orientation. I've reset my printer to default factory settings. I've noticed that all of the print pre-sets in my computer are set to portrait, and I can't find a way to change the pre-sets. Very frustrating as I print quite a few pictures this way and have never had a problem. The only way I could print a 4x6 and get the whole picture is to print it on 8x10 paper. Thank you for any suggestions. Using MacBook Pro (2011), HP Officejet 8500 all-in-one, and iPhoto 9.5.1.

That indicates that the problem is limited to your account on the Mac. Since deleting the iPhoto preference file didn't help it could be another pref file that's messing up the process. Here's a way to determine if that's the case:
Trouble Shooting Preferences
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
If you're running Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
1 - close all applications.
2 - open your Home/Library folder and Option-drag (copy) the Preferences folder to the Desktop.
3 - select the contents of your Home/Library/Preferences folder and drag them into the Trash bin in the Dock. You will be asked to provide your Admin password.
4 - reboot. Be sure to know your account's username and password as you will be asked to log in with it.
5 - run the application again and determine if the problem(s) is fixed.
6 - If the problem is fixed:
A - open the working Home/Library/Preferences folder.
B - Open the Preferences folder on the Desktop, select all of the contents and drag them into the working Home/Library/Preferences folder.
C - When the Copy window pops up check the "Apply to All" check box and then click on the Don't Replace or Skip button.
D - reboot.
7 - If the problem is NOT fixed, drag the contents of the Preference folder on the Desktop into the Home/Library/Preference folder and replace the entire contents that were created by clicking on Replace.
8 - reboot and you're back as square one.
Note: keep the Preference folder on the desktop until you're sure all registration info for your apps are working. If not you can copy the required files from the desktop pref folder to the working one.

I have selected Print and a image is shown. When selected in library mode the image I want is shown, different image in print mode? How do I get the image in library mode to show and print?

When I select an image in library mode the image I want it is shown. When I go to print mode a different image is shown. Why doees this happen? How do I get my required image to show and print?
Thanks, Bob

You will likely get better program help in a program forum
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Can I password protect printer and monitor settings?

I am the computer instructor at an elementary school. One of the teachers has a problem with a student who continually changes her preferred printer, her dispslay options, etc. She is running OS9, and I wondered if there was a way to protect her preferences like there is in OSX. She doesn't want to set up multiple users. Is there any way to do this?
Thanks for any input.

Hi, twirlingelephants. Using a utility such as File Buddy 7.6, which could be run from a CD rather than installed on the Mac(s) in question (installing it where students could use it would be the height of folly), your teacher friend could set the Invisible flag on any files she doesn't want tampered with, including the Monitors control panel, the Chooser, even the whole Control Panels folder. Then those files or folders wouldn't appear at all in the Finder, the Apple menu, etc., even though they were still in place and functioning. The student's access to settings would literally vanish. He might be able to guess what had happened, but unless students are able to install software on the school computers willy-nilly (which certainly shouldn't be true), there wouldn't be anything he could do about it.
Of course the student would probably decide to vent his frustration in some other way, so Don's suggestion of unpleasant consequences is certainly appropriate. But if the miscreant's identity is unknown, diverting his vandalism into some other realm could conceivably make him easier to spot.

I select print and it is taking a long time to print

I have a HP 6500A plus...the printer keeps going off line. Then when it shows on line it takes a long time to print.

How is your computer connected to your printer. Is it networked do you have other networked devices that work ok?
Please mark the post that solves your problem as "Accepted Solution"
Sometimes it takes several posts back and forth to get to a solution - please be patient.
I am employed by HP

TO BLACKBERRY FROM FANS IN SAUDI ARABIA. BBM missing select all and its not good please help.

Hi everyone
I am from Saudi Arabia, and I am using blackberry since 5 years now.
All the people in Saudi Arabia they had been waiting for BB10 since a long time, also me I have been waiting for it since TORCH-9800, and we had been so happy when blackberry company announced for BB10
BUT.....
The bad things we found in BBM and made a lot of people didn't buy BB10 and I am one of them, that in BBM when we need to send a broadcast to contacts, we have to select each one, we can't select all of them in one checkbox, and this is not good at all,, for me I won't get BB10 because my contacts in BBM over 200, and a lot of people they had the same thing as me.
So,,, to blackberry company please listen to your fans in Saudi Arabia and fix this problems with one small software update. PLEASE we looking for it AND YOUR SUPPORT.
A lot of people will buy BB10 just if blackberry fix this.

Personally I'm glad Broadcast BBM messages has been made more difficult to send... but, to each their own.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to calculate Sales percentage difference between selected year and its previous year in a Matrix

Hi,
I'm trying to generate a report using matrix like this
Month
Product PreviousYearSalesAmount SelectedYearSalesAmount %SalesDifference
I can populate year sales amount, but i cant calculate the percentage.
Can Anyone help me please.
Note: Month and Year are passed as parameters.
Thank you.

Hi Abhiram,
As per my understanding you can show your fields in matrix.
Only problem is to create the additional column which will have the %SalesDifference value right?
If yes,
Just create one column as shown in below screen,
It will create one column, Name the header of this newly created column as %SalesDifference
In below this header , where you want to show the value for %SalesDifference as
=sum(iif(Fields!year.Value=Parameters!year.Value,(Fields!SalesAmount.Value),-Fields!SalesAmount.Value))/Fields!SalesAmount.Value
Set the property of the column in number as Percentage.
run the report, you will see as below screen.
For your reference I am attaching my RDL code, you can save as .rdl file and run the report (sample Data inside the report only)
<?xml version="1.0" encoding="utf-8"?>
<Report xmlns="http://schemas.microsoft.com/sqlserver/reporting/2008/01/reportdefinition" xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner">
<Body>
<ReportItems>
<Textbox Name="textbox1">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>Matrix</Value>
<Style>
<FontFamily>Tahoma</FontFamily>
<FontSize>14pt</FontSize>
<FontWeight>Bold</FontWeight>
<Color>SteelBlue</Color>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Center</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>textbox1</rd:DefaultName>
<Height>0.37in</Height>
<Width>5in</Width>
<Style>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
<Tablix Name="Tablix1">
<TablixCorner>
<TablixCornerRows>
<TablixCornerRow>
<TablixCornerCell>
<CellContents>
<Textbox Name="Textbox16">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>Product</Value>
<Style>
<FontWeight>Bold</FontWeight>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>Textbox16</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<BackgroundColor>LightBlue</BackgroundColor>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCornerCell>
</TablixCornerRow>
<TablixCornerRow>
<TablixCornerCell>
<CellContents>
<Textbox Name="Textbox17">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value />
<Style>
<FontWeight>Bold</FontWeight>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>Textbox17</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCornerCell>
</TablixCornerRow>
</TablixCornerRows>
</TablixCorner>
<TablixBody>
<TablixColumns>
<TablixColumn>
<Width>1.79722in</Width>
</TablixColumn>
<TablixColumn>
<Width>1.76722in</Width>
</TablixColumn>
</TablixColumns>
<TablixRows>
<TablixRow>
<Height>0.25in</Height>
<TablixCells>
<TablixCell>
<CellContents>
<Textbox Name="SalesAmount">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Sum(Fields!SalesAmount.Value)</Value>
<Style />
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>SalesAmount</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
<TablixCell>
<CellContents>
<Textbox Name="Textbox76">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=sum(iif(Fields!year.Value=Parameters!year.Value,(Fields!SalesAmount.Value),-Fields!SalesAmount.Value))/Fields!SalesAmount.Value</Value>
<Style>
<Format>0.00%</Format>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>Textbox76</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
</TablixCells>
</TablixRow>
</TablixRows>
</TablixBody>
<TablixColumnHierarchy>
<TablixMembers>
<TablixMember>
<Group Name="month">
<GroupExpressions>
<GroupExpression>=Fields!month.Value</GroupExpression>
</GroupExpressions>
</Group>
<SortExpressions>
<SortExpression>
<Value>=Fields!month.Value</Value>
</SortExpression>
</SortExpressions>
<TablixHeader>
<Size>0.25in</Size>
<CellContents>
<Textbox Name="month1">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=MonthName(Fields!month.Value)</Value>
<Style>
<FontWeight>Bold</FontWeight>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Center</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>month1</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<BackgroundColor>LightBlue</BackgroundColor>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixHeader>
<TablixMembers>
<TablixMember>
<Group Name="year">
<GroupExpressions>
<GroupExpression>=Fields!year.Value</GroupExpression>
</GroupExpressions>
</Group>
<SortExpressions>
<SortExpression>
<Value>=Fields!year.Value</Value>
</SortExpression>
</SortExpressions>
<TablixHeader>
<Size>0.25in</Size>
<CellContents>
<Textbox Name="year">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Fields!year.Value</Value>
<Style>
<FontWeight>Bold</FontWeight>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Center</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>year</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixHeader>
<TablixMembers>
<TablixMember />
</TablixMembers>
</TablixMember>
</TablixMembers>
</TablixMember>
<TablixMember>
<TablixHeader>
<Size>0.25in</Size>
<CellContents>
<Textbox Name="Textbox61">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>%SalesDifference</Value>
<Style>
<FontStyle>Normal</FontStyle>
<FontWeight>Bold</FontWeight>
<TextDecoration>None</TextDecoration>
<Color>#000000</Color>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Center</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>Textbox61</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<BackgroundColor>LightBlue</BackgroundColor>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixHeader>
<TablixMembers>
<TablixMember>
<TablixHeader>
<Size>0.25in</Size>
<CellContents>
<Textbox Name="Textbox62">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value />
<Style>
<FontWeight>Bold</FontWeight>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>Textbox62</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixHeader>
</TablixMember>
</TablixMembers>
</TablixMember>
</TablixMembers>
</TablixColumnHierarchy>
<TablixRowHierarchy>
<TablixMembers>
<TablixMember>
<Group Name="Product">
<GroupExpressions>
<GroupExpression>=Fields!Product.Value</GroupExpression>
</GroupExpressions>
</Group>
<SortExpressions>
<SortExpression>
<Value>=Fields!Product.Value</Value>
</SortExpression>
</SortExpressions>
<TablixHeader>
<Size>1.38889in</Size>
<CellContents>
<Textbox Name="Product1">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Fields!Product.Value</Value>
<Style />
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>Product1</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixHeader>
</TablixMember>
</TablixMembers>
</TablixRowHierarchy>
<DataSetName>DataSet1</DataSetName>
<Top>0.38in</Top>
<Left>0.04667in</Left>
<Height>0.75in</Height>
<Width>4.95333in</Width>
<ZIndex>1</ZIndex>
<Style>
<Border>
<Style>None</Style>
</Border>
</Style>
</Tablix>
</ReportItems>
<Height>1.20167in</Height>
<Style />
</Body>
<Width>5.1in</Width>
<Page>
<LeftMargin>1in</LeftMargin>
<RightMargin>1in</RightMargin>
<TopMargin>1in</TopMargin>
<BottomMargin>1in</BottomMargin>
<Style />
</Page>
<AutoRefresh>0</AutoRefresh>
<DataSources>
<DataSource Name="DataSource1">
<DataSourceReference>DataSource1</DataSourceReference>
<rd:SecurityType>None</rd:SecurityType>
<rd:DataSourceID>501ee6de-61fb-416f-9a92-011661d01cba</rd:DataSourceID>
</DataSource>
</DataSources>
<DataSets>
<DataSet Name="DataSet1">
<Query>
<DataSourceName>DataSource1</DataSourceName>
<QueryParameters>
<QueryParameter Name="@year">
<Value>=Parameters!year.Value</Value>
</QueryParameter>
<QueryParameter Name="@Month">
<Value>=Parameters!Month.Value</Value>
</QueryParameter>
</QueryParameters>
<CommandText>select * from
select 'apple' Product ,1 month ,2014 year,2000 SalesAmount
union
select 'apple' Product ,1 month,2015 year,3000 SalesAmount
union
select 'dell' Product ,1 month,2014 year,3000 SalesAmount
union
select 'dell' Product ,1 month,2015 year,2500 SalesAmount
union
select 'apple' Product ,2 month,2014 year,1500 SalesAmount
union
select 'apple' Product ,2 month,2015 year,3000 SalesAmount
union
select 'dell' Product ,2 month,2014 year,3000 SalesAmount
union
select 'dell' Product ,2 month,2015 year,5500 SalesAmount
)t
where year between @year-1 and @year
and Month=@Month</CommandText>
<rd:UseGenericDesigner>true</rd:UseGenericDesigner>
</Query>
<Fields>
<Field Name="Product">
<DataField>Product</DataField>
<rd:TypeName>System.String</rd:TypeName>
</Field>
<Field Name="month">
<DataField>month</DataField>
<rd:TypeName>System.Int32</rd:TypeName>
</Field>
<Field Name="year">
<DataField>year</DataField>
<rd:TypeName>System.Int32</rd:TypeName>
</Field>
<Field Name="SalesAmount">
<DataField>SalesAmount</DataField>
<rd:TypeName>System.Int32</rd:TypeName>
</Field>
</Fields>
</DataSet>
</DataSets>
<ReportParameters>
<ReportParameter Name="year">
<DataType>String</DataType>
<DefaultValue>
<Values>
<Value>2015</Value>
</Values>
</DefaultValue>
<Prompt>year</Prompt>
</ReportParameter>
<ReportParameter Name="Month">
<DataType>String</DataType>
<DefaultValue>
<Values>
<Value>1</Value>
</Values>
</DefaultValue>
<Prompt>Month</Prompt>
</ReportParameter>
</ReportParameters>
<Language>en-US</Language>
<ConsumeContainerWhitespace>true</ConsumeContainerWhitespace>
<rd:ReportUnitType>Inch</rd:ReportUnitType>
<rd:ReportID>ee1a8383-6595-42b1-94f2-c68d681c85d3</rd:ReportID>
</Report>
Thanks
Prasad
Mark this as Answer if it helps you to proceed on further.

E-printing or cloud printing enabled printer and its cost.

Sir,
I want to buy it.

Hi,
I normally won't answer private message unless I know who. Please do not send messages to Administrator and ask me to reply. Now your question is how to convert to your money, I don't know where you are. You can convert yourself using the following site:
http://www.xe.com/currencyconverter/
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

PSE 11 - MacOX 10.7.5 Printing Wide Format Printer and Profiles Not Working Correctly

Macosx 10.7.5
When I start up PSE11 and go to print I set up the paper size then select a Printer Profile. When print the image it is a mess and seem to be black and white it is as if I printed on the wrong side of the paper.
I then go and try to print it again.   Now it all works as it should beutiful colours and spot on. all other print following this works.
Then I shut down PSE11.   Start it up again. Guess what first print is a mess again.   all others after are fine.
I uninstalled PSE11, deleted prefs. and reinstalled PSE11.    Same thing..   first print a mess all others ok.
the issue can be replicated consistantly......
no problems with PSE10 or PSE9
any suggestions?????
cheers elo

Thank You for your suggestions.
I have been printing using PSE for over 14 years going back before the term PSE came up. I have done this professionally using profiles from others and those I generate myself..
All the things you mentioned have been done.
The main point missing in your suggestions is   It is only the first print every time I open up PSE11 that does not work...
at completion of print I immediately go back to the file command and say print and then bypass all settings and print again.   this time and every other print aafter are perfect...      I did not change one single setting...
I know about printer and adobe settings etc.     but thanks for going through the list it was a good reminder of how to remember everything sometimes we rush and forget something...
Finally    It works PSE6, PSE9, PSE10, CS5, Lightroom 4.   I think I have the settings right......
Any suggestions for how to get PSE11 to force the settings for the first print would be appreciated..
Only thing I have not done is upgrade to the latest version of the epson driver. Released less than a month ago to provide support for mountain lion.(iam only on lion) Maybe just maybe???   you never know.   Will try this when I finish by next batch of prints.
I will back up as I do weekly...    Still have the old driver from way back in release 10.5.8   will try to fire up to 10.5.8 and see what happens....
cheers elo
Message was edited by: Elo Laugesen

[b]HOW TO:[/b] Copy and Paste THE Filename AND its PATH from Finder

HOW TO DO THIS: Copy and Paste THE selected Filename AND its entire PATH from Finder to another application as in document footer reference, or document database which has a path field to aid in locating the file later.
Finder, Spotlight and File Info (can be used to display Path) or using Command F, command I, etc. but user is not allowed to copy the path to clipboard.
This is rudimentary, yet the word Path, is unknown to Mac Help.
Message was edited by: jbov

AJ,
Isn't it amazing....There is no Command Key for this action? Apple Care was confounded too. And thanx, it'll be a help....
Jim
its tedious, but this should work:
open a terminal window.
Drag and drop the icon for the file in the terminal
window.
This will put the full path including the filename on
the command line.
Copy the path from the command line, and paste
(wherever).
Close the terminal window.

Incomplete Print and error massage

Dear sir
i just purchased one HP Deskjet 2545 all in one printer. I am a novice user.
i have already set up it wirelessly. I just turned the wifi-direct and wifi on my printer. Connected from my pc wifi with the passcode which printed automatically. then followed the steps with usb connected.I have given few single page print and its all ok. But when i have given print of a pdf file having 5 pages, it printed the last page correctly but it delivered an incomplete print of page 4 and it stopped. all the remaining 3 pages have not benn printed. I got a notification like "print error. an error occurred while printing". i tried the same print for thrice, and every time it finished with the same result. i observed, the incomplete print dont have few lines of the last paragraph and also the mergins are out of paper.
Then i have given print separately for 5 times by mentioning different page numbers each time and the it got printed. kindly solve this issue as i have to print at least 50 pages per day.
Regards

Hello again.
Please click on the HP Print and Scan Doctor to troubleshoot your printing issues. If this does NOT resolve your issue, please feel free to write back.
Thanks again
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Select Printer and its Settings

Similar Messages

Maybe you are looking for