Im using HP laserjet M1120N MFP printer and its required WIA driver.

hi, 
im using HP laserjet M1120N MFP printer.
last time i dont have any issues to printer or scan, and lately i cant scan
and only able to print out.
its required me have WIA driver. anyone know how to fix its.
thanks

Hello zuzack97,
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Similar Messages

  • HP laserjet m1536dnf mfp print and scan is very slow

    Hi Sir/Madam,
    HP laserjet m1536dnf mfp print and scan is printing and scanning slow on network. Sometimes scan is not work. That's why I have to reinstall the printer driver. So how to increase print speed?
    Thanks in advance,

    Hi riz1_4444,
    Welcome to the HP Forums, I hope you enjoy your experience!
    I understand the printer is printing and scanning slow on the network.
    I will be happy to help you.
    Make sure printer is connected directly to a wall outlet.
    Try printing a hardware test on the printer to see if it prints slow or not.
    Printing a Configuration Report. Select Method one: Print a Configuration Report from the printer control panel.
    I would restart the router to see if this will resolve the issue.
    Try another Ethernet cable.
    If you are still having issue then test the printer by connecting the printer to the computer by a USB cable to see if it is something on the network that is causing it to slow down.
    Hope this resolves your issue for printing slow over the network.
    Thank you for posting on the HP Forums.
    Have a wonderful day!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP laserjet M1120n MFP printer not functioning properly with Lion

    After installing this printer it will scan but with some flaws in the scanned image and it will not print at all.
    All that it displays is that there is an error after attempting to print. I'm wondering if there is some special driver that I need?
    The printer is about 4yrs old.
    Thank you

    Your printer should be supported in Lion. Check to make sure you have the latest drivers installed. Make sure the driver for it is selected in the printer list.
    You might try deleting the printer and reading it once the latest driver and software is installed.

  • HP LaserJet m1120n multifunction printer scan to network

    Hello,
    I have an issue making the scan to network function to work between HP LaserJet m1120n multifunction printer and Snow Leopard.
    Printing is working fine and it was added via IP.
    I checked the HP site for the instruction, but it does not work.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01846935&cc=us&lc=en&dlc=en #N441 the scanner does not show up.
    http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3 447597&lang=en&cc=us&taskId=135&prodTypeId=18972&prodSeriesId=3447595 does not show scanner driver for 10.6
    anyone using the same printer/scanner that could give me tips to get this working? thank you in advance.

    my setup is different.
    the printer is connected via ethernet to an airport extreme and printing is fine.HP Director/Scan is not detecting the printer over the network.
    i saw this one hp site(i forgot yhe link and i couldn't find it again) telling us to include network devices in preview and the scanner does not show on the options.

  • LaserJet M1120n MFP - Problems with printing over Wireless Network.

    Hi. I have recently purchased a HP M1120n MFP printer.  There are three wireless laptops (Vista, & XP Pro) that use this printer via a DrayTek Vigor 27000GE wireless router, then via cat 5 cable to Ethernet on printer.
    All three laptops can print, but sometimes the print queue backs ups.  The top print job will say "Printing" but it can say this for hours!  Then if I delete the print job, it will say "Deleting" - but nothing happens.  The only way to clear it is to reboot the laptop.
    Firmware datecode is 20080228.
    If I connect via USB cable directly to the printer it works correctly. 
    Any ideas to help resolve this frustrating problem?

    The bottomline is that this printer has no way of connecting other than a straight USB connection.   In order to make it wireless you have to have a device that will give it an network IP address.  The printer by itself can not do this.
    The only way to get this printer on a network is to buy a SEPERATE USB Printer Server.   Or, buy a separate router, like I said, that has a USB connection on the back that will support printers. 
    You can not connect it the way you want as it stands right now.
    However, call your ISP and have them set it up IF their Gateway device has a USB connection and really can support a printer.  It is their issue.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • [SOLVED] foomatic-rip-hplip and HP laserjet M1212nf MFP printer

    I'm trying to install and configure the drivers for the HP laserjet M1212nf MFP printer to work with CUPS over a wired network using the hplip utilities.
    I've installed and set up the printer drivers etc using hp-setup and the printer is appearing in the CUPS interface. The problem is that when trying to print a test page
    from the cups interface, I'm receiving the message "/usr/lib/cups/filter/foomatic-rip-hplip failed" 
    Has anyone had any experience with this error?  what needs to be done to fix this?  this is semi-important as I need my printer for work and school.
    SOLVED:  okay, so I found several solutions that combined seem to have solved my problems.
    1.) remove the printer from cups
    2.) instead of using 'hp-setup -i <printer-ip> just use hp-setup -i.
    3.) have Hal, Dbus, and Avahi up and running (probably my biggest problem, I didn't have hal or avahi installed, and I didn't have dbus running)
    4.) unpause printer
    5.) pray
    6.) print test page.
    these steps worked for me (not necessarily in the above order...)
    Last edited by Cyrusm (2011-02-14 03:52:43)

    I have problem with my M1212nf MFP.
    I can't even setup my printer and I get
    hp-setup[20577]: debug: Restarting CUPS...
    hp-setup[20577]: debug: Restart CUPS returned: exit=0 output=
    hp-setup[20577]: debug: addPrinter('HP_LaserJet_Professional_M1212nf_MFP', 'hp:/net/HP_LaserJet_Professional_M1212nf_MFP?zc=NPI8FD5F0', '', '', 'lsb/usr/HP/hp-laserjet_professional_m1212nf_mfp-hpijs.ppd.gz', '')
    hp-setup[20577]: debug: addPrinter() returned (0, Unable to connect to CUPS server)
    I'm very frustrated. I'm running all the mentioned daemons but no luck.

  • Just installed a HP Color Laserjet CM2320nf MFP printer, at the same time I upgraded to Lion. It prints fine, but I cannot use the scan functions.  I downloaded the most recent driver! Any help would be appreciated.

    Just installed a HP Color Laserjet CM2320nf MFP printer, at the same time I upgraded to Lion. It prints fine, but I cannot use the scan functions.  I downloaded the most recent driver! Any help would be appreciated.

    HP says that the drivers for your all in one print/scanner are downloadable from apple. For the scanner to use preview. image capture or the scan icon from the print driver queue.  I don't know how old your HP is, but I know that the newer Os from apple don't support a lot of older printers. You might be able find a third party driver that could work.

  • HP LaserJet M1120n MFP latest drivers for 64-bit Windows 7

    I can't get my HP LaserJet M1120n MFP to work with  64-bit Windows 7. I downloaded and installed the drivers from HP site, file named ljM1120-hb-pnp-win64-el.exe and scan doesn't work, can only print Word documents. Downloaded and run check with the HP Doctor program you strongly recommend, but the ! report says I must download and install the most recent driver....well, it was what I thought was what I would get from HP site. Thanks for help!

    Hi Lollo33,
    The only 64 bit drivers available for your printer are the basic print and scan drivers which do not include any additional scan software.  However, there is full solution driver support for Windows 7 32bit.
    HP LaserJet Hostbased Print/Scan Plug and Play Drivers
    Description:
    The Plug and Play Bundle provides EZInstall to assist with installation for direct USB connections and offers basic print and scan for all-in-one and multifunction devices.
    Details and specifications
    File name:
    ljM1120-hb-pnp-win64-en.exe [1/1, 14.14M]
    System requirements:
    No additional prerequisites
    Released:
    2009-10-11
    Version:
    20080808
    Compatibility:
    Microsoft Windows 7 (64-bit), Microsoft Windows XP x64, Microsoft Windows Vista (64-bit), Microsoft Windows Server 2003 64-Bit Edition
    As an alternative, you may be able scan using MS Paint or the built-in Windows Fax and Scan software.
    http://windows.microsoft.com/en-US/windows7/Scan-a-document-or-photo-with-Windows-Fax-and-Scan
    Let me know if this helps.
    Say "Thanks" by clicking the blue Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"; therefore, it's easier for others to find.
    I am an HP employee.

  • HP LaserJet M1120n MFP, Win7-64bit, LAN

    Hello, it is possible Hello, it is possible to print over LAN at printer HP LaserJet M1120n MFP from Windows 7 Professional 64 bit?
    I tried to use HP Universal Print Driver PCL6 and PCL5. Printer was detected, but doesn't work. Document was sending from pool to printer and that was all.
    On offcial support website is only driver for printing over USB.
    Thanks
    This question was solved.
    View Solution.

    Hello,
    I see that you are having problems printing over the network to your printer.  Could you provide more information around your network setup?  For example, are the PC and the Printer connected to the same router... or the same network?  Any detailed information about your network setup would be very helpful.
    It looks like there is another support thread discussing the same or similar issue:
    http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/HP-LaserJet-M1120n-MFP-does-not-print-i...
    Thanks,
    I am an HP employee.
    Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

  • Default paper size scanning problem, LaserJet M1120n MFP

    Hi, I just got a used LaserJet M1120n MFP. Installed the most up-to-date drivers form HP's website. Printing is fine over USB or LAN, however the WIA scanning driver defaults to paper size "Letter" and I can't scan A4 pages all the way. The bottom is always cut off and I get an unwanted strip besides the scanned document. Please, advise how to change the default paper size of the WIA driver to A4. I use Windows XP Pro. Looked everywhere but cannot find any settings that will allow me to change the default paper size. Any ideas?
    I have been thinking, could default paper size be somehow be tied to system locale? My locale is European and all other device drivers do default to A4. I wonder how the WIA scanning driver chose to default to Letter size.
    The TWAIN driver works fine (I can choose default paper size), though it is less intuitive than I expected. Too bad I can't use it over a LAN. Is there a way to calibrate the scanner for white as the background seems kind of dark?
    Your suggestions and ideas are most appreciated. Thank you.

    Thanks for the reply, Spencer. I have used Adobe Acrobat to scan by means of the WIA driver, but when I do so the paper size selection box is dimmed (inactive) and I can't choose any paper size (nor any is preselected). I have also used Win XP's native Scanner and Camera Wizzard; it doesn't even have a paper size setting. Then I have used it with Win 7's native Windows Fax and Scan; no paper size setting here either.
    Here is a useful thread on the same issue from Adobe's forum: http://forums.adobe.com/thread/844549
    Reading around the forums I came across several posts where people discussed the impossibiity to set paper size when scanning using the WIA driver. Their problem was a bit different, though. The WIA driver had locked to size 'Legal' while they needed to scan in size 'Letter'.
    The WIA interface was developed by Microsoft and here is what they have to say about the issue:
    http://msdn.microsoft.com/en-us/library/windows/hardware/ff548440%28v=vs.85%29.aspx
    'Supported Scanner Paper Sizes
    Although two WIA user interface components are able to display a list of page sizes to the user, there is no easy way for a WIA driver to know which page sizes a scanner supports.
    Page Size in WIA Applications
    There are no WIA properties that allow WIA drivers to report supported page sizes or that allow applications to specify page size directly. To communicate page size settings to a driver, an application must calculate the required size in dots per inch (dpi) and adjust the origin of the scan to conform with the registration requirements of the device.
    Page Size in the Common Scanner Dialog and in the Scanner and Camera Wizard
    Both the Common Scanner Dialog and the Scanner and Camera Wizard have a static table of supported page sizes in which each page size is described by its horizontal width and vertical height, both in increments of 0.001 inch. These page sizes are currently displayed only when the scanner is in document feeder mode.
    The largest page size (by area) that a driver supports in page feed mode, as determined by the maximum bed size, is considered the default page size. Paper sizes that do not fit on the feeder or on the bed of the device are not offered to the user.'  -- exactly my case!
    Having tried the same WIA driver (developed by HP in this case) on several PC's running different WIndows OS and using non-US locale settings, I have came to the conclusion that HP may have hard coded the Letter paper size in the driver. I guess this works for North America but not in Europe where A4 is the standard size.
    I guess I have to look into ways to get to that hard coded paper size setting in order to be able to make use of the driver. I don't even know if that will be possible but I'll keep on reading. Wish me luck

  • Can I make my HP laserjet m1522nf mfp printing wirelessly?

    I have this non-wireless hp laserjet m1522nf mfp printer at home. I have two laptops and am using FiOS wireless router for wireless internet access. I also have a Rosewill wireless router. It is not a printer server, just a regular wireless router. Now I use an enthernet cable connecting printer to Rosewill wireless router. Can I print from my laptops? If yes, how can I set it up?
    I know I can either buy a wireless printer server, or a wireless adaptor or use one of the laptop as printer server to make this work. But I want to try laptop + Rosewill wireless router + HP printer route.
    Thanks in advance,
    -J. Z.

    Hi,
    Based on its specs, it has:
    Connectivity, standard
    10/100Base-T Ethernet network port, Hi-Speed USB 2.0 compatible port.
    Connectivity, optional
    None
    You may be able to connect it to a wireless rounter and config it on the same wireless network then you can print wirelessly.
    Please use the following book (page #13) to set it up.
       http://h10032.www1.hp.com/ctg/Manual/c00389927.pdf
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP LaserJet M1212nf MFP Printer - Communication Failure with the scanner

    Dear all,
    May I kindly ask if there are any known resolutions in terms of a scanning issue with the HP LaserJet M1212nf MFP Printer?
    When it starts scanning the printer only scans the up to the 3rd or 4th page, it stops in the middle of the sheet and produces an error message stating the following: Communication Failure with the scanner.
    Are there any steps that may be followed in order to resolve the incident?
    Many thanks in advance.
    Best regards,
    Ryan

    Hi @Ryan_HP ,
    I see that you are experiencing a communication error during scanning of multiple pages. I would like to help, but I will need some more information to provide you with the correct steps to resolve this issue.
    If you are using Windows, download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
    Temporarily turn off any Antivirus Software, just to rule out any interference.
    Try scanning again.
    What operating system are you using?
    How to Find the Windows Edition and Version on Your Computer.
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    How is the printer connected? (USB/Ethernet)
    What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
    What scanning software are you using?
    Have a wonderful day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Alternate driver for LaserJet Pro MFP printer

    Can anyone suggest an alternate driver for a Mac Mini (OS X v10.4.11) to print on a LaserJet PRO MFP M127fw ?
    This question was solved.
    View Solution.

    Hi @suckerfish1, 
    I understand that you are looking for drivers for the 10.4 to use with the LaserJet PRO MFP M127fw. I can help you with this.
    Unfortunately 10.4, isn't a supported operating system, there are no drivers available.
    Here are the Supported Mac OS X operating systems: Mac OS X v10.6 Snow Leopard, OS X v10.7 Lion, OS X v10.8 Mountain Lion.
    HP LaserJet Pro MFP M127fw and Color LaserJet Pro MFP M177fw Printers Product Specifications.
    You would have to upgrade to 10.6 or get another Laserjet that supports 10.4.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Scan Feature on Laserjet M1120n MFP

    HI, I have a  Laserjet M1120n MFP and have just recently installed windows 7 on my pc which formerly had xp.  After installing the full driver pack from the hp website the printer works fine except for the scan to feature which behaves irratically. I have it set to scan to pdf which is how it was set before but when i go to scan multiple pages it sometimes comes out as just the first page, sometimes 2 instead of three and sometimes has two pages but they are both the first page.
    Any ideas?
    Thanks.

    Hi,
    The Printer is not compatible with Windows Server 2008, Windows Server 2003 is the only supported server OS.
    You may find its specifications listed below:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01118375&tmp_task=prodinfoCategory&cc=us&dlc=en...
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HP Color laserJet CM1015 MFP printing problem

    Till now my HP Color laserJet CM1015 MFP printer was working perfectly and suddenly prints miss aligned colors. Each color prints a little bit below another. I uninstalled printer’s software and reinstalled again but it didn’t help. There is no error messages. Printer’s alignment didn’t help either. Can anyone help me with this problem?
    Inkjet and Laser Printer Supplies
    Printer Cartridge Recycling
    http://www.cartridgeshop.com.au

    Yes I solved the problem. I had to clean the registry of all information regarding this printer. During the installation I noticed interesting thing. The only installation that worked well was from the CD that came with the printer. I've tried downloaded latest version but it didn't install properly and have no idea why.
    Inkjet and Laser Printer Supplies
    Printer Cartridge Recycling
    http://www.cartridgeshop.com.au

Maybe you are looking for