Select statement in ABAP

Hi,
I have a table with couple of GUID fields. Primary key is the main GUID. I have another field by name temp_guid which can have the normal guid values or 00000000000000000000000000000000. I want to write a select statement as follows:
My table name : X
Field required : temp_guid
Select temp_guid FROM X where del_ind = gc_no AND temp_guid is NOT (??)
I dont want to select those rows where temp_guid has the value 00000000000000000000000000000000.
I tried with IS NOT NULL. It doesnt seem to be working. Any help would be appreciated.
thanks,
Ashwin

Hi,
Declare a range.
range r_xx for x_temp_guid.
*population.
r_xx-sign = 'E'. "Exclude
r_xx-option = 'EQ'.
r_xx-low = '00000000000000000000000000000000'.
append r_xx.
*select statement
Select temp_guid FROM X where del_ind = gc_no AND temp_guid in r_xx.
You will get it.
regards,
Subbu

Similar Messages

Can we use is null in our select statement in ABAP program

hi,
I want to use 'is nul' or 'not null' in select statement of my ABAP program for any field. I have written below query but I am getting sy-subrc = 4 and getting no data. Can anyone resolve this.

Hi,
I think you've posted your question on the wrong forum. This is the SAP Business One development forum which is not part of ERP and doesn't include any ABAP or Netweaver programming.
For a list of forums please see here:
http://forums.sdn.sap.com/index.jspa
Kind Regards,
Owen

How to use 'is null' in select statement of ABAP program

hi,
I want to use 'is nul' or 'not null' in select statement of my ABAP program for any field. I have written below query but I am getting sy-subrc = 4 and getting no data.
SELECT * FROM mara INTO TABLE it_mara
WHERE volum IS NULL .
Can anyone resolve this.

Hi PKB,
Check the below thread for NULL and Space value in ABAP . It will help you
NULL and Space value in ABAP
Regards,
Pawan

SELECT statement help_HR ABAP

Hello experts.
i have browsed the forum about the how to solve my current issue.
i am creating an FM where i have to update an infotype.
here is my code:
IF sy-ucomm EQ lc_route.
    gwa_p0490-zzeval = zneweval.                  <<<<this already has a value
SELECT <what should i select here?>
      CALL FUNCTION 'HR_EMPLOYEE_ENQUEUE'
        EXPORTING
          number             = pa0490-pernr
      IF sy-subrc EQ 0.
      CALL FUNCTION 'HR_INFOTYPE_OPERATION'
        EXPORTING
          infty                  = ???
          number                 = ???
          SUBTYPE                = ???
          record                 = ???
          operation              = ???
            IF sy-subrc EQ 0.
         ENDIF.
      ENDIF.
      CALL FUNCTION 'HR_EMPLOYEE_DEQUEUE'
        EXPORTING
          number        = gwa_pa0490-pernr
      IF sy-subrc EQ 0.
      ENDIF.
    ENDLOOP.
    LEAVE TO SCREEN 0.
ENDif.
here's what i wanted to do:
i have a push button with a function code: 'ROUTE', and when i clicked that one,
infotype pa490-zzeval should be updated with the value of ZNEWEVAL.
questions:
1. how can i update it? whats the select statement should i use?
2. ZNEWEVAL value is obtained and stored in P0494. how can i link these two infotypes together in order to update the other infotype?
thanks for future responses.
Mark

Hi
before that HR_INFOTYPE_OPERATION .loop at P0490.
and give operation as mod.

Need help on select statement in ABAP

Hi,
I have 2 table. in that I need to do join. But 2 fields of table A that I need to join with the 2 fields in table B.
But problem is that both the fields of table A can be NULL(either of them).
i.c.
                      Table A                                                                      Table B
KONDA     KUNNR      PRICESHEET                                     KONDA       KUNNR
KA             NULL           A                                                       KA            1000
KA             NULL           B                                                       KA            1001
DZ             NULL            C                                                      DZ             1002
NULL         1000            D                                                       DZ             1003
NULL         1001            E                                                       DZ             1004
NULL         1002            F
NULL         1003            F
NULL         1004            G
After Joining I need for KONDA = 'KA'
KONDA     KUNNR      PRICESHEET
KA             NULL           A
KA             NULL           B
NULL         1000            D
NULL         1001            E
Could you plz help me...Plz reply soon. Thanks in advance
Regards
Anutosh

select a~konda a~kunnr a~pricesheet from table_a as a
join table_b as b on ( a~konda = b~konda or a~konda eq space ) and (a~kunnr = b~kunnr or a~kunnr eq space )
where b~konda = 'KA'.
Try that
Edited by: Ramiro Escamilla on Apr 3, 2008 11:48 PM

ABAP Joins or Separate select statements?

Hi,
I am working on a simulation of an implementation project as part of my in-house training programme. I am a rookie to ABAP and am now doing a print program that requires master data selection from tables ANLZ, LFA1, MSEG and CSKT, and also related line items from ANLA.
As a former Java/.NET programmer I used to play with database joins. Now since ABAP joins are much simpler to use, I take the best advantage of them. For instance, in this particular program, I fetched related data from ANLZ, ANLA, LFA1 and CSKT into one internal table using a single select statement with ABAP joins.
Now I happen to hear (in bits and pieces) that one should limit the use of nested joins to a certain extend. Instead, for the above program, I was advised to use 4 internal tables and to select data separately using FOR ALL ENTRIES. But in this case, we need to use 4 select statements, which means 4 database operations in place of just one.
From ABAP documentation, I read that we can link upto 24 tables in a single select statement using ABAP joins.
Can anyone clarify more about this? Which is high on performance?
Using a single select statement using joins
or
Using multiple selects -- FOR ALL ENTRIES?
Thanks and regards,
Arun

Hi Arun,
you keep reading in these forums that FOR ALL ENTRIES is more performant, but this is simply not true.
In your example, joining four tables for one DB operation is better than storing a lot of redundant data in internal tables just to perform four separate DB operations using FOR ALL ENTRIES.
Make sure you join the tables correctly, i.e. link dependent tables giving their full primary key.
FOR ALL ENTRIES can be used where effective join statements are not possible, e.g. when cluster tables are involved (like BSEG).
Cheers
Thomas
Edit: check this out too: Inner Join or For All Entries

ABAP select statements takes too long

Hi,
I have a select statement as shown below.
SELECT * FROM BSEG INTO TABLE ITAB_BSEG
                     WHERE BUKRS = CO_CODE
                     AND    BELNR IN W_DOCNO
                     AND    GJAHR = THISYEAR
                     AND    AUGBL NE SPACE.
This select statement runs fine in all of R/3 systems except for 1. The problem that is shown with this particular system is that the query takes very long ( up to an hour for if W_DOCNO consists of 5 entries). Sometimes, before the query can complete, an ABAP runtime error is encountered as shown below:
<b>Database error text........: "ORA-01555: snapshot too old: rollback segment
number 7 with name "PRS_5" too small?"
Internal call code.........: "[RSQL/FTCH/BSEG ]"
Please check the entries in the system log (Transaction SM21). </b>
Please help me on this issue. However, do not give me suggestions about selecting from a smaller table (bsik, bsak) as my situation does not permit it.
I will reward points.

dont use select * ....
instead u declare ur itab with the required fields and then in select refer to the fields in the select .
data : begin of itab,
         f1
         f2
         f3
         f4
         end of itab.
select f1 f2 f3 f4 ..
     into table itab
from bseg where ...
. this improves the performance .
select * is not advised .
regards,
vijay

Select statement (new to ABAP)

Hi, I just get to know ABAP and have been studying about it. I'm practising an exercise in which i use select statement to retrieve data from many tables with the same field. The tables i use are COSS, AFVC, PRPS and IMZO with the same field OBJNR. The data i need to retrieve is POSNR from table IMZO. This is the code that i've just written. Howvever, when i execute it, it said 'Unable to interpret t_imobj-posnr'. I think the code is not right somehow. Very appreciate any guides.
REPORT Z_IMPOS_TEST.
TABLES: coss,       "CO Object: Cost Totals for Internal Postings
        afvc,       "Operation within an order
        prps,       "WBS (Work Breakdown Structure) Element Master Data
        imzo.       "Table: CO Object - Capital Investment Prog.Pos.
TYPES: BEGIN OF st_impos,
objnr       TYPE coss-objnr,
gjahr       TYPE coss-gjahr,
pspnr       TYPE prps-pspnr,
posnr       TYPE imzo-posnr,
END OF st_impos.
DATA : st_imobj    TYPE st_impos,
       t_imobj     TYPE STANDARD TABLE OF st_impos.
*PARAMETERS: p_year TYPE coss-gjahr OBLIGATORY.
SELECT objnr gjahr
      INTO CORRESPONDING FIELDS OF st_imobj
      FROM coss
      WHERE objnr = st_imobj-objnr
      AND gjahr = '2007'.
   SELECT objnr
      INTO st_imobj-objnr
      FROM afvc
      WHERE projn = st_imobj-pspnr.
         SELECT objnr
         INTO st_imobj-objnr
         FROM imzo
         WHERE posnr = st_imobj-posnr.
         st_imobj-posnr = st_imobj-posnr.
         st_imobj-gjahr = '2007'.
         APPEND st_imobj TO t_imobj.
         ENDSELECT.
    ENDSELECT.
ENDSELECT.
WRITE: 'InvProgPosition is : ' t_imobj-posnr.

thank you everyone. I fixed most of the lines in the code. The syntac is correct now, but since i used nested select statements, it takes like FOREVER to give the output when i execute it!. Are there any other ways to make the code more effecient?
REPORT z_impos_test.
TABLES: coss,       "CO Object: Cost Totals for Internal Postings
        afvc,       "Operation within an order
        prps,       "WBS (Work Breakdown Structure) Element Master Data
        imzo.       "Table: CO Object - Capital Investment Prog.Pos.
TYPES: BEGIN OF st_impos,
objnr       TYPE coss-objnr,
gjahr       TYPE coss-gjahr,
kstar       type coss-kstar,
projn       type afvc-projn,
pspnr       type prps-pspnr,
posnr       type imzo-posnr,
END OF st_impos.
data: year TYPE coss-gjahr value '2007'.
DATA: t_output TYPE STANDARD TABLE OF st_impos WITH HEADER LINE,
      st_output TYPE st_impos,
      t_output2 TYPE STANDARD TABLE OF st_impos WITH HEADER LINE,
      st_output2 TYPE st_impos.
SELECT objnr gjahr kstar FROM coss
INTO CORRESPONDING FIELDS OF st_output
WHERE ( objnr LIKE 'NV%' OR
      objnr LIKE 'PR%' ) AND
       gjahr = year.
   SELECT SINGLE projn from afvc into CORRESPONDING FIELDS OF st_output
       WHERE objnr = st_output-objnr.
APPEND st_output to t_output.
ENDSELECT.
SORT t_output BY objnr.
DELETE ADJACENT DUPLICATES FROM t_output.
LOOP AT t_output into st_output.
SELECT objnr pspnr
       INTO CORRESPONDING FIELDS OF st_output2
       FROM prps
       WHERE objnr = st_output-objnr
       AND   pspnr = st_output-pspnr.
SELECT SINGLE posnr from imzo into CORRESPONDING FIELDS OF st_output2
       WHERE objnr = st_output2-objnr.
APPEND st_output2 to t_output2.
ENDSELECT.
ENDLOOP.
LOOP AT t_output2 to st_output2.
WRITE:   st_output2-posnr.
ENDLOOP.

Issue with Select options in select statement - ABAP Question

Hi
I am facing an issue with select options. Select statement is returning sy-subrc as 4.
I wrote the program as below:
SELECT-OPTIONS:
s_kunnr FOR bsad-kunnr,
s_lifnr FOR bsak-lifnr,
s_gjahr FOR bsad-gjahr,
s_bukrs FOR bsad-bukrs,
s_saknr FOR bsad-saknr,
s_budat FOR bsak-budat.
In start of selection I have written the select statement as
SELECT * FROM bsak INTO TABLE lt_bsak
WHERE bukrs IN s_bukrs AND lifnr = s_lifnr AND gjahr IN s_gjahr AND budat IN s_budat AND saknr IN s_saknr.
In selection screen I have not entered any values and executed the program. I am not getting any result. When I debug that, sy-subrc is 4 at above select statement. But table has records.
If am removing the "lifnr = s_lifnr " condition in select then select is returning values.
I am not getting where I made the mistake. Please suggest.
Thank you
Hanu

Hi,
The problem here with where condition select option lifnr = s_lifnr.
Use below select query.
SELECT * FROM bsak INTO TABLE lt_bsak
WHERE bukrs IN s_bukrs
    AND lifnr     IN s_lifnr
    AND gjahr   IN s_gjahr
    AND budat IN s_budat
    AND saknr IN s_saknr.
s_lifnr is a select option and you are passing it as parameter lifnr = s_lifnr.
if you want to pass this s_lifnr as single vale then pass in below mentioned way.
lifnr = s_lifnr-low
BR,
Vijay

Problems with Hints in abap code to use an index in a Select statement

Hi,
I want to use an especific index in a select statement but I can´t get it. I use de next statement:
SELECT ltaklgnum ltaktanum ltakvbeln ltaptapos ltapnltyp ltappvqui
       FROM ltak AS ltak INNER JOIN ltap AS ltap
                        ON ltaktanum = ltaptanum
                        AND ltaklgnum = ltaplgnum
       INTO TABLE l_t_tanum_silo
       WHERE ltap~lgnum EQ ip_lgnum
         AND ltap~pquit EQ ' '
         AND ltak~lgnum EQ ip_lgnum
         AND ltak~kquit EQ ' '
         AND ltak~queue EQ ip_queue
         %_HINTS DB2 ''.
We have DB2 for Linux Unix and Windows 9.5 as DB system.
How can I fix this?
Thanks a lot.
Regards

The DB2 for Linux Unix and Windows is coded DB6 for SAP and not DB2
Look at the following OSS notes
- [Note 129385 - Database hints in Open SQL|https://service.sap.com/sap/support/notes/129385]
- [Note 150037 - Database hints in Open SQL for DB6 (DB2 for LUW)|https://service.sap.com/sap/support/notes/150037]
- [Note 1270314 - DB6: DB2 9.5 Perf. degrad. for queries with INLIST clause|https://service.sap.com/sap/support/notes/1270314]
- [Note 868888 - DB6: Optimization Guidelines|https://service.sap.com/sap/support/notes/868888]
You should use a
SELECT ltak~lgnum ltak~tanum ltak~vbeln ltap~tapos ltap~nltyp ltap~pvqui
FROM ltak AS ltak INNER JOIN ltap AS ltap
ON ltak~tanum = ltap~tanum
    AND ltak~lgnum = ltap~lgnum
INTO TABLE l_t_tanum_silo
WHERE ltap~lgnum EQ ip_lgnum
    AND ltap~pquit EQ ' '
    AND ltak~lgnum EQ ip_lgnum
    AND ltak~kquit EQ ' '
    AND ltak~queue EQ ip_queue
%_HINTS DB6 '<IXSCAN TABLE=''LTAP'' INDEX=''"LTAP~M"'' />'.
In note 868888 there is a sample for a join.
SELECT A~TABSPACE
FROM TADB6 AS A
JOIN IADB6 AS B ON A~TABART = B~TABART
%_HINTS DB6 '<NLJOIN><IXSCAN TABLE=''IADB6'' />'
        DB6 '<IXSCAN TABLE=''TADB6'' /></NLJOIN>'.
Regards

ABAP Select statement performance (with nested NOT IN selects)

Hi Folks,
I'm working on the ST module and am working with the document flow table VBFA. The query takes a large amount of time, and is timing out in production. I am hoping that someone would be able to give me a few tips to make this run faster. In our test environment, this query take 12+ minutes to process.
    SELECT vbfa~vbeln
           vbfa~vbelv
           Sub~vbelv
           Material~matnr
           Material~zzactshpdt
           Material~werks
           Customer~name1
           Customer~sortl
      FROM vbfa JOIN vbrk AS Parent ON ( Parentvbeln = vbfavbeln )
             JOIN vbfa AS Sub ON ( Subvbeln = vbfavbeln )
             JOIN vbap AS Material ON ( Materialvbeln = Subvbelv )
             JOIN vbak AS Header ON ( Headervbeln = Subvbelv )
             JOIN vbpa AS Partner ON ( Partnervbeln = Subvbelv )
             JOIN kna1 AS Customer ON ( Customerkunnr = Partnerkunnr )
      INTO (WA_Transfers-vbeln,
            WA_Transfers-vbelv,
            WA_Transfers-order,
            WA_Transfers-MATNR,
            WA_Transfers-sdate,
            WA_Transfers-sfwerks,
            WA_Transfers-name1,
            WA_Transfers-stwerks)
      WHERE vbfa~vbtyp_n = 'M'       "Invoice
      AND vbfa~fktyp = 'L'           "Delivery Related Billing Doc
      AND vbfa~vbtyp_v = 'J'         "Delivery Doc
      AND vbfa~vbelv IN S_VBELV
      AND Sub~vbtyp_n = 'M'          "Invoice Document Type
      AND Sub~vbtyp_v = 'C'          "Order Document Type
      AND Partner~parvw = 'WE'       "Ship To Party(actual desc. is SH)
      AND Material~zzactshpdt IN S_SDATE
      AND ( Parentfkart = 'ZTRA' OR Parentfkart = 'ZTER' )
      AND vbfa~vbelv NOT IN
         ( SELECT subvbfa~vbelv
           FROM vbfa AS subvbfa
           WHERE subvbfavbelv = vbfavbelv
           AND   subvbfa~vbtyp_n = 'V' )           "Purchase Order
      AND vbfa~vbelv NOT IN
         ( SELECT DelList~vbeln
           FROM vbfa AS DelList
           WHERE DelListvbeln = vbfavbelv
           AND   DelList~vbtyp_v = 'C'             "Order Document Type
           AND   DelList~vbelv IN                  "Delivery Doc
              ( SELECT OrderList~vbelv
                FROM vbfa AS OrderList
                WHERE OrderList~vbtyp_n = 'H' )    "Return Ord
      APPEND WA_Transfers TO ITAB_Transfers.
    ENDSELECT.
Cheers,
Chris

I am sending u some of the performance isuues that are to be kept in mind while coding.
1.Donot use Select *...... instead use Select <required list>......
2.Donot fetch data from CLUSTER tables.
3.Donot use Nested Select statements as. U have used nested select which reduces performance to a greater extent.
Instead use views/join .
Also keep in mind that not use join condition for more for more than three tables unless otherwise required.
So split select statements into three or four and use Select ......for all entries....
4.Extract the data from the database atonce consolidated upfront into table.
i.e. use INTO TABLE <ITAB> clause instead of using
Select----
End Select.
5.Never use order by clause in Select ..... statement. instead use SORT<itab>.
6.When ever u need to calculate max,min,avg,sum,count use AGGREGATE FUNCTIONS and GROUP BY clause insted of calculating by userself..
7.Donot use the same table once for Validation and another time for data extraction.select data only once.
8.When the intention is for validation use Select single ....../Select.......up to one rows ......statements.
9.If possible always use array operations to update the database tables.
10.Order of the fields in the where clause select statement must be in the same order in the index of table.
11.Never release the object unless throughly checked by st05/se30/slin.
12.Avoid using identical select statements.

Consolidating the SELECT Statement --- ABAP

Hi
I have following query & calculation in part-1. I want to change part-1 so that i could achieve the same by Part-2. I know Part-2 is not syntactically good, but any suggestion how to make Part-1 as Part-2. Thanks...
Part-1)
SELECT Creation_Date
             Rcvd_Date
    FROM ZPURCHASE
    INTO CORRESPONDING FIELDS OF TABLE ITAB
    UP TO 3 ROWS
    WHERE Customer = '3000'
    ORDER BY Rcvd_Date DESCENDING.
    LOOP AT ITAB INTO WA.
      WRITE:/ WA-Creation_Date,
              WA-Rcvd_Date.
    ENDLOOP.
   v_sumDays = 0.
   v_counter = 0.
   LOOP AT ITAB INTO WA.
      v_noOfDays = WA-Rcvd_Date - WA-Creation_Date.
      v_sumDays = v_sumDays + v_noOfDays.
      v_counter = v_counter + 1.
   ENDLOOP.
   v_leadTime = v_sumDays / v_counter.
Part-2)
SELECT SUM ( Creation_Date - Rcvd_Date     ) / COUNT(*)
    FROM ZPURCHASE
    INTO CORRESPONDING FIELDS OF TABLE ITAB
    UP TO 3 ROWS
    WHERE Customer = '3000'
    ORDER BY Rcvd_Date DESCENDING.

Hi
select creation_date Rcvd_date from ZPURCHASE into table itab up to 3 rows where Customer = 3000.
v_sumDays = 0.
v_counter = 0.
loop at itab into wa sort by Rcvd_date descending.
v_noOfDays = WA-Rcvd_Date - WA-Creation_Date.
v_sumDays = v_sumDays + v_noOfDays.
v_counter = v_counter + 1.
ENDLOOP.
I think you cannot do calculations in Select statement as you have declared in PART2.
Aggregate functions can be performed on one field or cannot do calculation other than their own functionality.
to achieve your requirement you need to do your own calculations, As you have done in your part1.
Please check the above code its almost dimilar to your code
But do not use move corresponding.
hope it make you clear.
Thanks
Lalit Gupta

Re : select-options in abap objects

Dear friends,
I want to give select-options in abap-objects program. How to give that.
Thanking You
with regards,
Mani

HI Mani,
It's common mix ABAP Procedural with ABAP Objects in the same program.
You should use the same way used in ABAP procedural program as Marco Cerdelli sad.
But inside ABAP OBJECTS classes you can't use is these statement type.
Don't forget to close this thread and all yours previous when your question be answered ! In case of doubt read the [rules of engagement|https://forums.sdn.sap.com/].
Best Regards.
Marcelo Ramos

Select statement in a smartform

Hi
is it possible to write a select stmt in a smartform?
what is the use of convert data (step) in lsmw?
thanks,
sap-abap.

hi,
u can write select statement in smartforms
<b>what is the use of convert data (step) in lsmw?</b>
this step is used to convet the legacy system data into sap format based upon conversion rules
if u find it useful mark the points
Regards,
Naveen

How build where clause in select statement in FM for Virtual provider

Hi
I looking for example of FM for Virtual provider where I find code how assign to select statement "where" clause value from query variable.
In following code how build t_r_custtype range and how assign value to it.
CODE********************************
TYPE-POOLS: abap.
initialize
CLEAR: e_t_data, e_t_msg.
this is specific to infoprovider VIRTPROV
CHECK i_infoprov = 'VIRTPROV'.
FIELD-SYMBOLS: <l_s_sbook> TYPE sbook,
                 <l_s_data> TYPE ANY.
DATA: l_t_component TYPE abap_compdescr_tab,
        l_t_sbook     TYPE TABLE OF sbook.
initialize
CLEAR e_t_data.
Data selection / only Business Customer
SELECT * FROM sbook
    INTO CORRESPONDING FIELDS OF TABLE l_t_sbook
    WHERE custtype in t_r_custtype.
ENDCODE********************************
Thanks a lot
Adam

Hello,
Would you like fill the ranges in Customer exit for BEx..?
If Yes. please refer the attachment for the whole code...
"Sample code in Customer Exit in BEx"
IF i_step = 2.
CASE i_vnam.
WHEN 'ZDAY_CX'.
LOOP AT i_t_var_range INTO loc_var_range WHERE vnam = 'ZDAY_IN'.
CLEAR: l_s_range.
ZT_DT1 = loc_var_range-low.
ZT_DT2 = loc_var_range-HIGH.
CALL FUNCTION 'DATE_CREATE'
EXPORTING
ANZAHL_JAHRE = 0
ANZAHL_KALTAGE = 0
ANZAHL_MONATE = '-1'
ANZAHL_TAGE = 0
DATUM_EIN = ZT_DT1
DATUM_EIN_ULT = ' '
ULTIMO_SETZEN = ' '
IMPORTING
DATUM_AUS = ZFIDAY .
E_TT =
E_ULTKZ =
CALL FUNCTION 'DATE_CREATE'
EXPORTING
ANZAHL_JAHRE = 0
ANZAHL_KALTAGE = 0
ANZAHL_MONATE = '-1'
ANZAHL_TAGE = 0
DATUM_EIN = ZT_DT2
DATUM_EIN_ULT = ' '
ULTIMO_SETZEN = ' '
IMPORTING
DATUM_AUS = ZLSDAY.
E_TT =
E_ULTKZ =
l_s_range-low = ZFIDAY .
l_s_range-high = ZLSDAY .
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
ENDLOOP.
*****************************************End*************************************
**To get the From date (For Text Variable) as per the user input date interval range**
WHEN 'ZR_S'.
LOOP AT i_t_var_range INTO loc_var_range WHERE vnam = 'ZDAY_IN'.
CLEAR: l_s_range.
ZT_DT1 = loc_var_range-low.
ZT_DT2 = loc_var_range-HIGH.
CALL FUNCTION 'DATE_CREATE'
EXPORTING
ANZAHL_JAHRE = 0
ANZAHL_KALTAGE = 0
ANZAHL_MONATE = 0
ANZAHL_TAGE = 0
DATUM_EIN = ZT_DT1
DATUM_EIN_ULT = ' '
ULTIMO_SETZEN = ' '
IMPORTING
DATUM_AUS = ZFIDAY .
E_TT =
E_ULTKZ =
l_s_range-low0(2) = ZFIDAY6(2).
l_s_range-low+2(1) = '.'.
l_s_range-low3(2) = ZFIDAY4(2).
l_s_range-low+5(1) ='.'.
l_s_range-low6(4) = ZFIDAY0(4).
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
ENDLOOP.
*****************************************End*************************************
Please let me know if any clarification required..
Rinku..

Select statement in ABAP

Similar Messages

Maybe you are looking for