Select & Validate data

Greeting to All,
Need your help on my below requirements. Appreciate you can provide me the coding guide. Thanks in advance for your help.
My upload file will contain 3 column of data as example on below.
Service entry
1000002000
Company Code
AB01
Release Code
A1
1. I need to validate SE number with the company code provided in the upload file from ESSR-LBLNI (SE number from template), then get ESSR-EBELN (PO number) from ESSR-EBELN, goto EKKO-EBELN and get EKKO-BUKRS
compare EKKO-BUKRs with company code in upload file.
2. If the data in upload file is not found, provide error message.

Check the below Program :
REPORT ztest_ytt.
TABLES : essr,
 ekko.
Internal table for File
DATA : BEGIN OF i_text OCCURS 0,
 text(255) TYPE c,
 END OF i_text.
Assume that you have data in ITAB.
DATA : BEGIN OF itab OCCURS 0,
 se(10) TYPE c, " Service entry
 bukrs(4) TYPE c, " Company code
 rc(2) TYPE c, " Reason code
 END OF itab.
Error Log internal table
DATA : BEGIN OF i_error OCCURS 0,
 se(10) TYPE c,
 bukrs(4) TYPE c,
 text(100) TYPE c,
 END OF i_error.
DATA v_file TYPE string.
PARAMETERS : p_file LIKE rlgrap-filename OBLIGATORY.
possible entry list (F4 dropdown) for input file name
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
*-SELECT FILE FROM USERS LOCAL PC
CALL FUNCTION 'WS_FILENAME_GET'
 EXPORTING
 DEF_FILENAME = ' '
 def_path = 'C:\Temp\'
 mask = ',.,..'
 mode = 'O'
 title = 'Select File '(007)
 IMPORTING
 filename = p_file
 RC =
 EXCEPTIONS
 inv_winsys = 1
 no_batch = 2
 selection_cancel = 3
 selection_error = 4
 OTHERS = 5.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
START-OF-SELECTION .
Get the data from file to Internal table
PERFORM get_data_file.
Validation file data
PERFORM validate_data.
*& Form get_data_file
 text
--> p1 text
<-- p2 text
FORM get_data_file .
v_file = p_file.
CALL FUNCTION 'GUI_UPLOAD'
 EXPORTING
 filename = p_file
 filetype = 'ASC'
HAS_FIELD_SEPARATOR = ' '
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
 TABLES
 data_tab = i_text
 EXCEPTIONS
 file_open_error = 1
 file_read_error = 2
 no_batch = 3
 gui_refuse_filetransfer = 4
 invalid_type = 5
 no_authority = 6
 unknown_error = 7
 bad_data_format = 8
 header_not_allowed = 9
 separator_not_allowed = 10
 header_too_long = 11
 unknown_dp_error = 12
 access_denied = 13
 dp_out_of_memory = 14
 disk_full = 15
 dp_timeout = 16
 OTHERS = 17
IF sy-subrc NE 0.
 MESSAGE e000(z01) WITH 'No data found'.
ELSE.
 LOOP AT i_text.
Assume that your file is comma delimted text file
 SPLIT i_text-text AT ',' INTO itab-se
 itab-bukrs
 itab-rc.
 APPEND itab.
 CLEAR : i_text,
 itab.
 ENDLOOP.
ENDIF.
ENDFORM. " get_data_file
*& Form validate_data
 text
--> p1 text
<-- p2 text
FORM validate_data .
DATA : wa_essr LIKE essr .
DATA : wa_ekko LIKE ekko.
LOOP AT itab.
 CLEAR : wa_essr,
 wa_ekko.
Compare the data with ESSR Table
 SELECT SINGLE * FROM essr INTO wa_essr
 WHERE lblni = itab-se.
 IF sy-subrc EQ 0.
 SELECT SINGLE * FROM ekko INTO wa_ekko
 WHERE ebeln = wa_essr-ebeln
 AND bukrs = itab-bukrs.
 IF sy-subrc NE 0.
My assumption is no error message ,if you want to then you can give
 message e000(z01) with 'No valid data'.
 i_error-se = itab-se.
 i_error-bukrs = itab-bukrs.
 i_error-text = 'No valid data at Purchase order'.
 APPEND i_error.
 ENDIF.
 ELSE.
 i_error-se = itab-se.
 i_error-bukrs = itab-bukrs.
 i_error-text = 'No valid data at Purchase order'.
 APPEND i_error.
 ENDIF.
ENDLOOP.
ENDFORM. " validate_data
I guess you should not give any error message,if you give give error message ,then how about other records in file.
Simply keep all error records in one internal table,then display error log .
Thanks
Seshu

Similar Messages

Validate Date Range in inputDate component

Hi
I am using JDev 11.1.1.2.0
I have an inputDate component which on click i need to give dates from today to future dates not passed dates.
So i have included 'validate date time range' component in the inputDate component and in the minimum property i have declared 'adf.currentDate' using expression builder and set the maximum as Jan 31,2099.
But when i execute my application i am able to select passed dates using the inputDate component, please help how can i check the date using a validator in inputDate component.
Thanks
Sudeep

ya i had tried with that property too....
i have declared minValue as adf.currentDate and on that it changes the value of maxValue to current date in Jan 3,2012
i have convertDatetime component in my inputDate to display the selected date in certain format.
It gives error as the format doesnot matches with the convertDatetime and inputDate component.
How can i use the minValue and maxValue of inputDate component?
the component:-
<af:inputDate
label="Planned Termination Date"
id="id2"
value="#{modifyuser.pterminationdate}"
valueChangeListener="#{modifyuserfields.plannedTermDate}"
minValue="adf.currentDate" maxValue="2099-12-31">
<af:convertDateTime pattern="dd-MMM-yyyy"/>
</af:inputDate>

Validate date of Birth

How I can validate date of birth?
Month-Date-Year
Example: 11-21-1960
Thanks

You could use a regular expression:
E.g.
var dateRegExp = "^(0[1-9]|1[012])-(0[1-9]|[12][0-9]|3[01])-(19|20)\d\d$"; // mm-dd-yyyy
if (oField.rawValue.search(dateRegExp) === -1) {
// error!
Or you could use a date object as suggested in the previous post, but also stop the user from typing in a date so they will be forced to use the date selection box. This would ensure that the date is always in the correct format. To stop the user from typing in data, put the following code in the change event for the field:
if (xfa.event.change.length == 1) {
xfa.event.change = "";

Need help! Can't validate date overlaps for a tabular column

Hello all,
The validation I created to validate whether new or updates rows does not overlap with any records in the table isn't working.
The columns are StartDt and EndDt
Validation Type: NOT EXISTS
Validation expresion:
select 1
 from sample S
 WHERE S.STARTDT BETWEEN :STARTDT AND :ENDDT
OR(S.ENDDT BETWEEN :STARTDT AND :ENDDT)
or (S.STARTDT <= :STARTDT and S.ENDDT >= :ENDDT)
or (:STARTDT <= S.STARTDT and :ENDDT >= S.ENDDT)
Error Message:
Times overlap
When Buttons pressed
-Select Button-
The validation works if a new row or updated row overlaps any existing start and end date records but it doesn't work if I update startdate and end date rows that doesn't overlap existing date times
Example:
TABLE DISPLAYS THE FOLLOWING RECORDS
NAME START DATE END DATE
TEST 1/1/2012 12/31/2012
If I update the rows to the following values, I receive an error message (although those values don't overlap any records in the table)
NAME START DATE END DATE
TEST 6/1/2012 10/30/2012
Any ideas? Do I need to change my code?
Click the link to view the answer to this question. Need help! Can't validate date overlaps for a tabular column
Message was edited by: CharlieMack

Logic for date range overlap testing only requires two conditions in the WHERE clause:
ORACLE-BASE - Overlapping Date Ranges
WHERE S.STARTDT <= :ENDDT AND S.ENDDT >= :STARTDT -- TRUE for ranges that overlap
It looks a little odd, but, if you scribble out a 'logic table', it makes sense.
Condition
A.start <= B.end
A.end >= B.start
A__A B--B
true
false
A__B=A--B
true
true
A__B==B__A
true
true
B--A==B__A
true
true
B--B A__A
false
true
MK

How to select the data from a Maintainance View into an internal table

Hi All,
Can anybody tell me how to select the data from a Maintainance View into an internal table.
Thanks,
srinivas.

HI,
You can not retrieve data from A mentenance view.
For detail check this link,
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
Regards,
Anirban

Selecting all data from employee where foreign key = null and show it in view

Hi guys i have view like following :
SELECT dbo.Nationality.NationalityName, dbo.Employee.DriverName, dbo.Employee.DriverID, dbo.Employee.NationalityID, dbo.Employee.ResidentNo,
dbo.Country.CountryName, dbo.Employee.CountryID, dbo.Branch.BranchName, dbo.Employee.BranchID, dbo.Employee.JoinDate,
dbo.Employee.ResignDate, dbo.Employee.HealthCarNo, dbo.Employee.JobID, dbo.Jobs.JobName, dbo.Department.DepartmentName,
dbo.Jobs.DepartmentID, dbo.Employee.PlaceIssue, dbo.Employee.Deduction, dbo.Employee.ExpireDateMedical, dbo.Employee.PolicyNumber,
dbo.Employee.Owner, dbo.Employee.Version, dbo.Employee.ExpireDateResident, dbo.Employee.Salary, dbo.Employee.SexID, dbo.Sex.SexType,
dbo.Sex.FlagSex, dbo.Employee.MiritialID, dbo.Miritial.MiritualStatus, dbo.Status.StatusType, dbo.Employee.StatusID, dbo.Employee.UnactiveReason,
dbo.Employee.BirthDate, dbo.Employee.DateToday, dbo.Employee.UserID, dbo.Employee.PassportNo, dbo.Employee.Period,
dbo.Employee.AccountNo, dbo.Employee.Bonus, dbo.Employee.AccountType, dbo.Employee.PlaceOfBirth, dbo.Employee.EmplyeeName,
dbo.Employee.ExpireDateresidentHijri, dbo.Employee.PassportDateStart, dbo.Employee.PassportDateExpire, dbo.Religon.ReligonName,
dbo.Employee.ReligonID
FROM dbo.Nationality INNER JOIN
dbo.Employee ON dbo.Nationality.NationalityID = dbo.Employee.NationalityID INNER JOIN
dbo.Country ON dbo.Employee.CountryID = dbo.Country.CountryID INNER JOIN
dbo.Branch ON dbo.Employee.BranchID = dbo.Branch.BranchID INNER JOIN
dbo.Jobs ON dbo.Employee.JobID = dbo.Jobs.JobID INNER JOIN
dbo.Department ON dbo.Jobs.DepartmentID = dbo.Department.DepartmentID INNER JOIN
dbo.Sex ON dbo.Employee.SexID = dbo.Sex.SexID INNER JOIN
dbo.Miritial ON dbo.Employee.MiritialID = dbo.Miritial.MiritialID INNER JOIN
dbo.Status ON dbo.Employee.StatusID = dbo.Status.StatusID INNER JOIN
dbo.Religon ON dbo.Employee.ReligonID = dbo.Religon.ReligonID
suppose i need to show all data from Employee table (NationalityName,BranchName,JobName) where
NationalityID =NULL OR BranchID=NULL OR JobID=NULL
WHAT I DO
Notes : I mean in topic(selecting all data from view not table
meaning i need to show all data in employee table by view
in case of forign key(any forign key)equal null

I think you need to change
FROM dbo.Nationality INNER JOIN
dbo.Employee ON dbo.Nationality.NationalityID = dbo.Employee.NationalityID
to
FROM dbo.Nationality
LEFT JOIN
dbo.Employee ON dbo.Nationality.NationalityID = dbo.Employee.NationalityID
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Cannot select a Date in the 2nd week of any month from "Month View"

Looking for some help with a strange problem that has started within the last day or 2. In Calendar, under the Month view, it will not allow me to select a date in the current week (or the second Week dates in ANY Month for that matter i.e. 6-8-08 thru 6-14-08, 8-3-08 thru 8-9-08, 4-6-08 thru 4-12-08). It skips from the 1st week of June (6-1-08 thru 6-7-08), to the 3rd and 4th weeks of June (6-15-08 thru the end of the month). It is like it is not recognizing where my finger is pointing. I can access the current week through the list view and day view, and it will allow me to post an event by choosing the current week in the add option, but will not let me pick that date to view it once it has been scheduled. The dot shows up, and it shows on list view, but cannot get to the date by selecting it in month view. That section of my phone screen will let me access other applications and recognize where I am touching, so I don't believe it is a sensor issue. I have tried rebooting, but it has not helped. Any ideas out there? Please let me know. Thank You! for any guidance.

Clearwater Randy,
If the screen is only not responding in that particular application, you may want to first do a reset. To reset, press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears.
If that does not resolve your issue, try restoring in iTunes. To restore, connect your iPhone into iTunes and click Restore on the Summary page. Note: All of your information will be erased from the iPhone, so make sure to have a backup of important information on your computer before restoring.
Hope this helps,
Jennifer B.

How to select maximum date in report

i have tried to select maximum date in my report by this way:
select max(date) from a
but the result came out same as "select date from a"
there is no different whether i put a max or not. is anyone there can help me on this please....
Thank you....

Hi Sharon,
Since you cannot execute this query from SQL, I assume that the DB does not support the function MAX(expr). Am not sure which DB versions support this function, probably the Database forum will be a better place to ask that.
As a workaround, what you could try is to use this statement
select hire_date from employees order by hire_date desc
and in the report data model, you make a summary column and choose Function > First, Source > Hire_Date, and Reset At > Report.
Hope that helps.
Navneet.

SELECT OPTIONS DATE.

Hello , I need your help , to access to every date in an interval of the select option , in order to execute a function module that use date in one of its parameters .
select-options : dat for sy-datum .
   CALL FUNCTION 'ZPRUEBA''
     EXPORTING
       offic                =
       chdsk                =
       inicio_periodo       =
     FIM_PERIODO          = dat "but i need here every date of the interval
     NO_UPDATE            =
   IMPORTING
     NR_COBRANCAS         =
   ENDSELECT.
How can I do that ? , tnhx.

hi
put the function module in the loop.
data : date like sy-datum.
select-options : s_date for date.
while ( s_date-low LE s_date-high ).
CALL FUNCTION 'ZPRUEBA''
EXPORTING
offic =
chdsk =
inicio_periodo =
FIM_PERIODO = s_date-low
NO_UPDATE =
IMPORTING
NR_COBRANCAS =
add 1 to s_date-low.
endwhile.
reward if helpful
prasanth

How to display null values in the graphs, when i select a date range?

Hi,
Can you please help me in achieving the below requirement:
We have a date promt, i have selected the date range from 12-Oct-2009 to 15-Oct-2009 and clicked on the go button.
In the above date range, data is only availabe on 14-Oct-2009. here the requirement is to display as all the records (12th, 13th , 14th & 15th) in the bar graph.
Currently the graph view is displaying the data only for 14-Oct-2009 in the bar graph.
If data is not available it should display in the bar graph as empty for that particular dates.
Help is highly apprieciated.
Thanks in Advance.

Check out [this post|http://obiee101.blogspot.com/2009/04/obiee-showing-zero-in-bargraph.html].

How can I select a date to view in Calendar while I am in month view?

I am looking at month view in Calendar on my iPad. I touch a date. Intuitively, I expect that date to open up in Day or Week view, but it doesn't! On my iphone, it works just fine. Am I missing something?
How can I select a date to view while in Month view and have it go to Day or Week view?
Thanks for any help.

I would try this:
In Lr import one photo into a different folder that you can see in the list.
Then in your OS (mac Finder / Win Explorer) move the photo to the folder that you cannot see.
In Lr the photo will now appear with a question mark on its frame. Click directly on the question mark and select <Locate photo>. Navigate to the folder, open it, and click on the photo.
Maybe this will help Lr to recognize the folder.
If this doesn't help try renaming the folder in your OS.

How to get selected row data of an ADF table in HashMap?

Hi,
Can anyone please tell me how to selected row data of an ADF table in HashMap like :
Object obj = pageTable.getSelectedRowData();
JUCtrlHierNodeBinding rowData = (JUCtrlHierNodeBinding)obj;
Now in above code I want the convert rowData in HashMap.
Can anyone please tell me how to do that? Its urgent.
Thanks,
Vik

Vik,
No need to ask the same question 3 times...
In [url http://forums.oracle.com/forums/message.jspa?messageID=4590586]this post, Nick showed you how to get the Row.
If it were so urgent, you could have done a little reading of the javadocs to come up with code like this (not tested, up to you to do that)
HashMap m = new HashMap();
Row r = get it like Nick showed you to;
Object values[]=r.getAttributeValues();
String names[]=r.getAttributeNames();
for (int i=0; i<r.getAttributeCount(); i++)
m.put(names, values[i]);

To Select the data from two table one is transp table and onther is cluster

Hi All,
I want to select the data from two tables
Here i am giving with an example.
Fileds: kunnr belnr from bseg. table bseg
fields: adrnr from kna1 table: kna1.
Know i want to put these into one internal table based on kunnr and belnr.
Thanks in advance.
Ramesh

Hi,
 U cant use joins on cluster table and BSEG is a cluster table so use FOR ALL ENTRIES for taht
refer this code
*& Form sub_read_bsak
 text
--> p1 text
<-- p2 text
FORM sub_read_bsak.
*--Select data from BSAK Table
SELECT lifnr
 augdt
 augbl
 gjahr
 belnr
 xblnr
 blart
 dmbtr
 mwskz
 mwsts
 sgtxt
 FROM bsak
 INTO CORRESPONDING FIELDS OF TABLE it_bsak
 WHERE belnr IN s_belnr
 AND augdt IN s_augdt.
IF sy-subrc EQ 0.
*--Sort table by accounting document and vendor number
 SORT it_bsak BY belnr lifnr.
ENDIF.
ENDFORM. " sub_read_bsak
*& Form sub_read_bseg
 text
--> p1 text
<-- p2 text
FORM sub_read_bseg.
IF NOT it_bsak[] IS INITIAL.
*--Select data from BSEG table
 SELECT belnr
 gjahr
 shkzg
 kostl
 hkont
 ebeln
 ebelp
 FROM bseg
 INTO CORRESPONDING FIELDS OF TABLE it_bseg
 FOR ALL ENTRIES IN it_bsak
 WHERE belnr EQ it_bsak-belnr
 AND gjahr EQ it_bsak-gjahr
 AND shkzg EQ 'S'.
 IF sy-subrc EQ 0.
*--Sort table by accounting document
 SORT it_bseg BY belnr.
 ENDIF.
ENDIF.
ENDFORM. " sub_read_bseg

Getting error while tring to Check in any document in Sharepoint 2007. Error - "Unable to validate data. System.Web.Configuration.MachineKey.GetDecodedData(Byte[] buf, Byte[] modifier, Int32 start, Int32 length, Int32& dataLength) ...

Hi Team,
I am getting error while tring to Check in any document in Sharepoint 2007. Error - "Unable to validate data. System.Web.Configuration.MachineKey.GetDecodedData(Byte[] buf, Byte[] modifier, Int32 start, Int32 length, Int32& dataLength).
Anybody please let me know how to resolve the issue. It has affected our 9 site collection with almost 2000+ sites. Please email me your your suggestion or you can share your ideas here also.
Tried to reset the IIS, checked the Internet connection speed (8MBps). Cleared the cache and all but no luck.
Thanks,
Pronob

Hello,
I have found this support window for you:
http://support.microsoft.com/kb/556031
http://technet.microsoft.com/en-in/library/cc298582%28v=office.12%29.aspx
This may help you
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

How do I select a date column and display the millesecond along with it.

I am trying to select a date column from database and want to
display millesecond with it. How do I do this. I am aware of
the "alter session set NLS_DATE_FORMAT = 'MM/DD/YY HH:MI:SS'"
command. However, I do not know how to display this with the
millesecond.
Thanks for all the help.

Example:
SQL> CREATE OR REPLACE JAVA SOURCE
2 NAMED "MyTimestamp"
3 AS
4 import java.lang.String;
5 import java.sql.Timestamp;
6
7 public class MyTimestamp
8 {
9 public static String getTimestamp()
10   {
11   return (new
12   Timestamp(System.currentTimeMillis())).toString();
13   }
14   };
15 /
Java created.
SQL> CREATE OR REPLACE FUNCTION my_timestamp
2    RETURN VARCHAR2
3 AS LANGUAGE JAVA
4 NAME 'MyTimestamp.getTimestamp() return java.lang.String';
5 /
Function created.
SQL> CREATE TABLE test_time
2    (date_col VARCHAR2 (23))
3 /
Table created.
SQL> INSERT INTO test_time (date_col)
2 SELECT my_timestamp
3 FROM   dual
4 /
1 row created.
SQL> SELECT date_col
2 FROM   test_time
3 /
DATE_COL
2001-11-02 14:58:51.766

Select & Validate data

Similar Messages

Maybe you are looking for