Selected componets on design canvas jump location

When I select a componet/object on the design cavas, that is located far enough down it requres first scrolling down using the scroll bar, Creator:
1) sets the focus of control on that componet
2) jumps back to the top of the scroll bar
3) moves the componet to the upper portion of the canvas
It happes regardless of the type of componet I select.
I'm using
- Java 1.5.0_04
- Java Studio Creator 2 Build 060120
- Windows XP v5.1 w/ SP2
- Pentium M 1.78GHz Dell D810 Laptop
Has anyone else experienced this?

The selected componets are placed in a layout panel set to a grid page layout. The grid panel itself is a fixed with panel with a negative left margin and a 50% left side offset to keep it centered on the browser window at all times.
I haven't done a ton of pages or projects so only time will tell. It does occur after restarting the IDE.

Similar Messages

  • Object too small to select on design canvas

    I have created 14px by 14px images for a mini navigation area, and added them to a set of Image components.  Due to the very small size, these objects are not selectable on the Xcelsius design canvas, although I can select them in the object browser.  The only way for me to affect their position on the canvas is to add another temporary object and do a multiple selection, and then drag the temporary object around.  (The object in question gets dragged along with it).
    Since I seem to have a decent workaround, I'm just posting about it to report the problem.

    Thanks Forto. I check into it.

  • Split View - Design side jumps

    I've come to the conclusion that the most exhausting part of
    working with Dreamweaver is chasing down my previous location on
    the Design side of the Split View after making a code change. What
    is it witth that? Example: If I select an area on the design page,
    go into the code side and, say, change a local style cattribute (or
    do just about anything for that matter) the page in the Design area
    jumps to the bottom of the document. I'm tired of having to scroll
    back to where I was every time I make a change in the code. I've
    been dealing with this forever and just wrote it off as a quirk but
    I need to know: Is there a way to fix this?
    Thanks.
    Cayce

    The settings you removed are NOT DW's default settings. In
    other words, the
    only way that *.htm and *.html could have gotten into the
    Open in Code View
    field would be if you had put them there.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "MJ-78" <[email protected]> wrote in message
    news:giha9n$r28$[email protected]..
    >I had that same problem, but I just fixed it by going to
    Edit > Preferences
    > >
    > File Types/Editors. In the first field, labeled "Open in
    Code View", I
    > removed
    > the file extensions html and .htm, and now the split
    view and design view
    > are
    > no longer greyed out. Code view is still available, too.
    >
    > I had looked at that setting before, but it wasn't clear
    that "Open in
    > code
    > view" meant that it would be impossible to view the
    files in Design view.
    > So
    > they definitely need an improvement for the user
    interface there.
    >

  • Design Canvas & Centering text

    Forgive me for being a noob here but I have a couple of questions :-
    1.) How do I undock the design canvas so I can use it full screen ? At the moment, everything will only snap to the grid that is the displayed part of the design canvas - not the whole screen.
    2.) How do I centre text on the screen for instance a heading ? I've used 'text-align: center' but that of course just justifies in the output text box - not the screen.
    SPG

    (1) At the moment there's no way to do that with a single gesture, but we're merging the NetBeans 4.0 window manager so in the future that will be easy.
    For now, you can click on the "pushpin"-like icon near the top of the properties and project navigator window to cause them to slide out to the right.
    (2) To get centering like this, don't use absolute positioning. Here's what you can do: go to the Source tab, and add something like this (under body or form depending on where you want it):
    <p style="text-align: center"> Hello World! </p>
    (or use h1, h2, ... instead of p.) Output Text renders a span which is an inline tag, so you can't set the text-align directly on it. If you want to use an output text (for example to value bind it), you can first add an output text (but DON'T absolute position it: either double click on the output text item in the palette, or drop it and then go remove its position, left and top properties from the style property of the output text). Then go to the source tab, locate the h:outputText you've dropped, and add a <p style="text-align: center"> right before it and </p> right after it, e.g. "wrap the output text with a p block tag).
    Hope that helps.
    -- Tor
    http://blogs.sun.com/tor

  • Design canvas editor not working

    I think I may have started the program before the auto-updater finished it's work. After closing it up and restarting it I was no longer able to see the design canvas editor for any of my projects. Thinking I may have screwed something up I re-installed everything, including wiping out the projects I had.
    The only other thing that may or may not have influenced this is that I recently installed the Java-Plug-in 1.4.2_05 though after a time or two I removed this as well.
    The design canvas editor appears to be dead. I have re-installed several times. Creating new projects results in the same problem. The Project Navigator works and it is aware that the project is open. I have tried both the base install and a fully updated install.
    Has anyone else seen this before?
    URL to the JSC log:
    http://www.kattare.com/docs/jsclog.txt

    From the stacktrace in your log file it looks like the canvas designer module has been disabled. To undo that, either go and reenable it via the options dialog, or simply nuke your {userdir}/system/Modules/ dire]ctory. (This is assuming you want to continue using the rest of your user directory in case you've done lots of option customizations etc. Otherwise simply nuking the entire userdirectory as Winston suggested works.)

  • Constant selection in query designer

    hi guys
    please explain abut
    constant selection in query designer 7.o

    Hi,
    For ex if you had designed a MP using the IC's and  DSO's in which if all the fields are not in common with both the info provides used in the MP you will get the results in 2 rows and the values for the ones which are not in common will be displayed as # in the results.
    This can be the case in Infosets as well.
    to over come this we use "constant selection"
    Check the below link which explain the constant selection with an example.
    http://sapbi101.blogspot.com/2010/05/constant-selection-in-query-apples-and.html

  • After playing the song I selected in iTunes 11 it jumps to the another album rather than playing the next song on the original album I selected.  ***?  How do I fix this?!?!?

    After playing the song I selected in iTunes 11 it jumps to the another album rather than playing the next song on the original album I selected.  ***?  How do I fix this?!?!?

    I found that clearing the "Up Next" list fixes the problem.  But I have to clear that list everytime I just want to hear just that one album.  Each time I select on song on the album, the "Up Next" list builds it's own list rather than just play through the album.  I think this has something to do with the issue.  How can I fix this?!?!

  • U945-s4110 Bios Password, Jumper locations needed.

    So a friend brought me his u945-s4110, it's got an admin password on it that his son put on and has forgotten.  I;m not very familiar with jumper locations on a laptop.  Can anyone help?
    Photos of the board.  (I assume it's close to the cmos battery)  Can I just remove the cmos for an extended aamount of time to wipe this? 
    Attachments:
    DSCN3054.JPG ‏6090 KB
    DSCN3058.JPG ‏5225 KB

    You need to have it professionally serviced by an authorized service provider.
    - Peter

  • I try to copy a selection into new blank canvas however the layer in the new canvas becomes gray/black/white, did i wrongly click on something ? Please help , Thank you in advance

    Hi Gurus,
    I have a beginner in photoshop , I tried to copy a selection into new blank canvas however the layer in the new canvas becomes gray/black/white, did i wrongly click on something ? Please help , Thank you in advance

    How did you open the new document? What Image mode is the document in and what exactly did you copy to the clipboard? What was the current Photoshop target when you did the copy? Was it a straight copy or a copy merge etc...

  • Can't select anything in design mode

    I am new on a large Flex project, and when I go into design mode on one of the mxml files, I can't select anything.  The other views work fine.  Is there a lock, or something?   Below is what it looks like (black mark just hides brand info).  Note that there is a red line near the bottom.  It is actually selectable, but it doesn't do anything.  If I go to Source mode and select a chunk of code, then back to design mode, it does show it as selected.
    This in Flex Builder 3, thanks.

    Have you tried using the outline view for selection?
    Jason San Jose
    Software Engineer, Flash Builder

  • F4 help for the selection screen field designed in screen painter

    Hi all,
    I have designed selection screen in the screen painter. in that for one of the fields i have to give f4 help. for that i have writter the code in PAI event. in this event i have used the standard Function module for f4 help. but no f4 help is comming for that field. can any body suggest what i have to do.
    Thanks & Regards,
    Giri.

    Hi,
    You must use the correct event to meet ur requirement use  POV event instead of  PAI event.
    for more clarification and example program see  below the demo program
    DEMO_DYNPRO_F4_HELP_DYNPRO
    DEMO_DYNPRO_F4_HELP_MODULE
    Cheers
    fareed

  • Selections on query designer

    Hello gurus,
    I have a question about query designer.
    I have various selections  (cost centre) on  structure. And i want under each selection the detail os costs for each cost centre.
    i have:
    structure:
             selection 1 (cc = 1100001)
             selection 2 (cc = 1100010, 1101101, 1100002)
    and i want the result to be:
    selection 1                  10000
               1100001           10000
    selection 2                  5000
               1100010           1000
               1101101           2000
               1100002           3000
    i tryed to put char cost centre below my structure, but it show me all cc's below each selection.
    How could i do this?
    Thanks in advance.
    Vitor

    Hello gurus,
    I have another question...
    How can I predefine layout as hierarchy.
    i have:
    selection1
    selection2
    selection3
    0comp_code
    0costcentre
    on analyser is displayed:
    selection1 0comp_code1  0costcentre1
                                          0costcentre2
    and so on...
    How could i predefine not to show this form, but instead as hierarchy?
    Thanks in advance,
    Vitor Ramalho
    Edited by: Vitor Ramalho on Jan 16, 2008 12:28 PM

  • Error in OWB Designer center data location tab?

    hi
    I created a new control center from warehouse builder designer center.After creation new control center i opened control center using open editor .i can see two tab ie (details and data location) when i take data location tab i can't see any thing in data location.Inside datalocation tab i cant see any thing . i have to add some location inside this data location tab . Any solution for this . iam using oracle 11.1.0.6

    Hi
    Did you create locations in the Locations part of the tree?
    Cheers
    David

  • Sometimes Cannot Select Elements in Design view of Dreamweaver

    Hello,
    From time to time, i have trouble selecting elements in the design view.
    Sometimes it works right away. Sometimes I need to click 6-10 times, and sometimes it just doesn't work ( a larger all encompassing element stays selected and no matter how much i click, there is no change )
    I originally thought it was a bug, but I expected it to be fixed by now.
    This also seems arbitrary, perhaps someone here know why it's happening and how to avoid it.
    Thanks
    Peter

    You probably have a CSS overflow:hidden property applied to one or more divisions for float containment.  Switch to Split View.  Or turn off CSS styles in Design View:  View > Style Rendering > untick Display Styles.
    Or you can comment out /**overflow:hidden **/ until you're ready to Preview.
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb

  • Selecting an area in canvas

    Hi all,
    I have a canvas inside an application. I want to select a rectangular area inside the canvas, just like  we use to select text in MS Word , i.e, by dragging the mouse by left click.  i know it can be done by Mouse_UP and Mouse_DOWN events, but what i want is that while we drag , the area gets started filling with a color.  is it possible??
    Thanks

    Something like this?,
    http://blog.jeethukarthik.com/flex-selection-rectangle/

Maybe you are looking for