Selecting Top N records in a table using a slider or drop down list

Hi Experts,
I have a query that displays 1000 records ( say) in VC iview.
Can i have a drop down list in the variable form to control the number of records displayed in the output table by the user .
or can i have a horizaontal slider ( Min value is 2 -max 1000) to display the number of records in the output table selected by the horizaontal slider.
basically iam having a requirement to give the user the capability to select the Top N records of the output table...where the user enters the N value in Drop downlist of variable form or user slides the N value using Horizontal slider
Thnaks
P.Navakanth

Hi
Yes it is possible. First you need to create 'Condition' in BEx query where you have to create 'TOP N' & 'N' should be a variable input. Then you will get this in 'Variable Screen' of a query. In VC for this same variable you can use slider. Use 'Select' function in the 'Action' of the slider & pass it to require table/graph.
Try this, this will give you the required result.
Regards
Sandeep

Similar Messages

Firefox 3 used to have a drop down list under the back button for recent pages. How do I get this in FF4?

FF3 used to have a drop down list of the most recent pages that a tab had displayed under the back arrow button. FF4 does not appear to have this. How can I see history of what's been displayed in the tab say four or five pages back?

You can get the drop down list by either right-clicking on the back/forward buttons, or holding down the left button until the list appears.
If you want the drop-down arrow you can add it with the Back/forward dropmarker add-on - https://addons.mozilla.org/firefox/addon/backforward-dropmarker

How to use value in a drop-down list box as "With these Values" parameter?

Hello, new user.
I have a drop-down list box on Page 1, upon which the user can choose a study number. The List Box is named "P1_STUDY_NBR".
Then I have a list, one entry of which goes to my master-detail form, which is Page 6. I would like it to go to the study number that the user choose on Page 1.
In my target on the create/edit list entry, I put in "Page in this Application", "Page 6", then in Set these items, I put in
P6_STUDY_NBR
My question is what to use in With these values, where I want the contents of the P1_STUDY_NBR. I tried:
&P1_STUDY_NBR
and that does not work. If I put in one of the study numbers, like 336-00, then it does work, but I want it to pass the study number the user chooses in the list box. How do I refer to the contents of P1_STUDY_NBR?
-Mary

Yes, that does work, thanks. I'm now getting the default value I was putting in yesterday rather than an error message, so there must be something loading it, but I'll hunt around for what process might be doing that, or try re-creating the master-detail form again.

How to use the concept of drop down list in Xcode

Please help to make an app that uses a dropdown list inside a tableview cell

You can use UIPickerView or Safari web page, where could be displayed a drop down list instead.

Create a drop down list in a cell within a table ?

Is there a way to create a drop down list in a cell within a table ? Like the way it can be done in ms word or excell ? I dont mean an interactive pdf/form. I want to create a table in indesign which has drop down lists other people can use to populate a table quickly.

Not possible. InDesign isn't designed to be form-filling software. At best, it can create fields which can be passed on to a PDF file, which usually further has to be edited in Acrobat Pro.

Abort inserting a record in a table using a trigger

Hi there,
Is there any way to abort inserting a record in a table using a trigger?
For full details, I have the following table ("myTable"):
BSC INTEGER NOT NULL,
BTS VARCHAR2(20) NOT NULL,
INFO1 INTEGER,
INFO2 INTEGER
myTable_PK = PRIMARY KEY (BSC,BTS)
I have also a stored procedure that imports a data from text file and inserts them to the specified table (using UTL_FILE package). The stored procedure works great.
But the thing that in the text file itselft it might be (due to third-parity report generation bug) that the primary key will be violated or the BSC/BTS field has null value. In such case I just want to ignore the insertion statement using a trigger.
Thanks

Ok Jens, could you tell me what exception could I use?
Below a protion of my StoredProcedure.
CREATE OR REPLACE PROCEDURE update_myTable() IS
FHANDLE UTL_FILE.FILE_TYPE;
BSC INTEGER;
BTS VARCHAR2(20);
INFO1 INTEGER;
INFO2 INTEGER;
BEGIN
FHANDLE := UTL_FILE.FOPEN('LOG_FILE_DIR',FILENAME,'R',4000);
LOOP
UTL_FILE.GET_LINE(FHANDLE,STR);
-- Process the line STR and generates BSC, BTS, INFO1, and INFO2 values
EXECUTE IMMEDIATE 'INSERT INTO myTable VALUES(:1,:2,:3,:4)' USING BSC,BTS,INFO1,INFO2;
END LOOP;
EXCEPTION WHEN NO_DATA_FOUND THEN UTL_FILE.FCLOSE(FHANDLE);
END UPDATE_R205BTS;
Remember that I am already using an exception with NO_DATA_FOUND to indicate the end of file then closing it.
Thanks for your reply

Prevent Identical Selection in Drop Down List in an Expanding Table

Hi All,
I have a 2x2 table in which the top row is a header row and the bottom row 'Row1'. Row1 Cell1 has two buttons in it, one to add a new Row1 using Javascript click instance script:
this.parent.parent.instanceManager.addInstance()
...and one to remove any Row1 using Javascript click instance script:
var rowNum = this.parent.parent.index;
this.parent.parent.instanceManager.removeInstance(rowNum);
Row1 Cell2 contains a datadropdown object. Basically, when a user adds an extra Row1, I need to prevent them from selecting a previously selected item from the dropdowndata list. I'm having trouble figuring it out because I'm trying to put together exit instance script (or should it be validate script?) that is trying to reference Row1[*]. In simpler situations where I have two fixed objects, I have just been doing this as a FormCalc exit script:
if (Object1 = Object2)
then xfa.host.messageBox("You can't select the same thing again")
and xfa.host.resetData("Object1")
endif
... which prevents the user from selecting something with the same rawvalue by alerting them, then clearing the field.
Hope this makes sense and that someone can help! Thanks in advance to all the adobe gurus out there

Hi,
Would it be possible to filter out the choices in the drop down list that have already been selected. If so you could try something like this JavaScript in the preOpen event of your drop down.
var dropDownItems = [ "abc", "def", "hij" ];
var rows = Table1.resolveNodes("Row1[*]");
for (var i = 0; i < rows.length; i++)
    var row = rows.item(i);
    if (!row.DropDownList1.isNull)
        dropDownItems = dropDownItems.filter(function(element) { return element !== row.DropDownList1.rawValue});
this.setItems(dropDownItems.join(","));
The first line initialises a variable with all the possible values and then we go though each row filtering out the ones already selected.
You will probably have to change the form object names to suit you form, but here is my sample to test the code, https://files.acrobat.com/preview/eb0256dc-af30-4f7c-9187-469ba84464a4
Regards
Bruce

Passing database table values to drop down list list using "vrm_set_values"

DEar Experts,
How can we pass database travel to drop down list using vrm_set_value call function.
Looking forward for advise from you experts .
REgards
CHandan

Dear Anubhab,
Thanks for your suggestion,
Plz see my code:
Type-pools: vrm.
DATA: it_zlt_mita       TYPE STANDARD TABLE OF Zlt_mita,
           wa_zlt_mita    TYPE zlt_mita,
           it_vrm              TYPE vrm_values with header line .
Selection-Screen: Begin of Block b1 With Frame Title text-001.
Parameters:
    p_mitar            Type Zlt_mita-M1 as listbox visible length 20 user-command zcc01 obligatory,
    p_mitarn          Type Zlt_mita-M2.
Selection-Screen : End of Block b1.
AT SELECTION-SCREEN OUTPUT.
   Select * From ZLT_mita INTO CORRESPONDING FIELDS OF TABLE it_zlt_mita.
LOOP at it_zlt_mita into wa_zlt_mita.
     it_vrm-key   = wa_zlt_mita-m2.
     it_vrm-text = wa_zlt_mita-m1.
     APPEND it_vrm.
     Clear: it_vrm, wa_zlt_mita.
ENDLOOP.
                 CALL FUNCTION 'VRM_SET_VALUES'
                   EXPORTING
                     id                    = 'P_mitar'
                     values                = it_vrm[]
*                  EXCEPTIONS
*                    ID_ILLEGAL_NAME       = 1
*                    OTHERS                = 2
                 IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
                 ENDIF.
Data: dynfields type table of dynpread with header line.
     dynfields-fieldname = 'p_mitar'.
      Append dynfields.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
    dyname                               = sy-cprog
    dynumb                               = 1000    " can I use sy-dynnr here
*   TRANSLATE_TO_UPPER                   = ' '
*   REQUEST                              = ' '
*   PERFORM_CONVERSION_EXITS             = ' '
*   PERFORM_INPUT_CONVERSION             = ' '
*   DETERMINE_LOOP_INDEX                 = ' '
*   START_SEARCH_IN_CURRENT_SCREEN       = ' '
*   START_SEARCH_IN_MAIN_SCREEN          = ' '
*   START_SEARCH_IN_STACKED_SCREEN       = ' '
*   START_SEARCH_ON_SCR_STACKPOS         = ' '
*   SEARCH_OWN_SUBSCREENS_FIRST          = ' '
*   SEARCHPATH_OF_SUBSCREEN_AREAS        = ' '
tables
    dynpfields                           = dynfields
* EXCEPTIONS
*   INVALID_ABAPWORKAREA                 = 1
*   INVALID_DYNPROFIELD                  = 2
*   INVALID_DYNPRONAME                   = 3
*   INVALID_DYNPRONUMMER                 = 4
*   INVALID_REQUEST                      = 5
*   NO_FIELDDESCRIPTION                  = 6
*   INVALID_PARAMETER                    = 7
*   UNDEFIND_ERROR                       = 8
*   DOUBLE_CONVERSION                    = 9
*   STEPL_NOT_FOUND                      = 10
*   OTHERS                               = 11
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
    dyname                     = sy-cprog
    dynumb                     = 1000
tables
    dynpfields                 = dynfields
* EXCEPTIONS
*   INVALID_ABAPWORKAREA       = 1
*   INVALID_DYNPROFIELD        = 2
*   INVALID_DYNPRONAME         = 3
*   INVALID_DYNPRONUMMER       = 4
*   INVALID_REQUEST            = 5
*   NO_FIELDDESCRIPTION        = 6
*   UNDEFIND_ERROR             = 7
*   OTHERS                     = 8
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PLZ SUGGEST ME IF ANYWHERE I WENT WRONG IN MY CONCEPT AS PER YOUR SUGGESTION.
Looking forward for your further guidance.
Regards
Chandan

Populating 2nd drop down list based on the selection of the first using Access DB...

I have a form that I would like to have the user select the first drop-down list as populated from a data source, but them have the subsequent selection choice dependent on the first. For instance, if they select "administration" for their division, the department numbers shown in the second box would only contain those with "Administration" listed as their division. I have all of this information in my Access table.
I've seen this possible by storing all of the information in a script. i.e.- listing each division and department. The only problem is that we have over 300 departments and making any changes would be very tedious in an in-form script. Is there any way to have this automatically reference a table in Access?
Thank you,
Mike

In the current version of the portal, it is not possible as you cannot do code-behind on postbacks. If you want more flexibility, you need to write your own front-end that uses the FIM Service webservices...
Regards, Soren Granfeldt
blog is at http://blog.goverco.com | facebook https://www.facebook.com/TheIdentityManagementExplorer | twitter at https://twitter.com/#!/MrGranfeldt

In the top left on my screen where the back arrow is, there used to be a drop down arrow to skip back many pages. After installing 4.0.1, it has disappeared. How do I get it back?

In the top left on my screen where the back arrow button is to go back to previous webpages, there used to be a drop down arrow just to the right so I can see many of my previous web pages. Since installing Firefox 4.0.1, that arrow disappeared.

You can get the drop down list by either right-clicking on the back/forward buttons, or holding down the left button until the list appears.
If you want the drop-down arrow you can add it with the Back/forward dropmarker add-on - https://addons.mozilla.org/firefox/addon/backforward-dropmarker

I am using Windows XP and just installed Elements 12. When I try to select a different brush or shape the drop down list will not stay open long enough to select a different item. I have used Elements 9 for awhile and have not had this problem

I am using Windows XP and just installed Elements 12. When I try to select a different brush or shape the drop down list will not stay open long enough to select a different item. I have used Elements 9 for awhile and have not had this problem

grannybel
It would appear that you are destined for the Adobe Photoshop Elements Forum since your question is related to Photoshop Elements and not Premiere Elements which is the focus program where you have posted.
But, while the arrangements are being made, here are a few things for you to think about if you have not already
1. Reset Tools - Select Brush Tool, then
2. Delete Settings File
Go to Full Editor/Edit Menu/Preferences/General and click on the option "Reset Preferences on Next Launch".
We will be watching for your progress.
Thank you.
ATR

Using selected items from drop-down list in rest of page

Hi,
I hope I'm able to describe clearly what's the problem.
So I'm implementing a form for the moment. It contains a drop-down list. The user has to select one item from it and as a result another drop-down list on the same page needs to be filled with a couple of options. I wanna do this without refreshing the page, cos else I have to retrieve all the values from boxes that were allready filled in. Is it possible?
Greetings,
Raf

This cn be done with javascript. But you need to cache the data on first load of your jsp.
regards

To pass the selected data to a variable from the drop down list in abap wd

Hi,
I have already created a drop down list and populated it with data from table by using the node and linking it with the internal table. Now I need to know which element is selected so based on that I need to perform some function. eg. based on the selected data , i need to populate the next drop down list.
A demo code will be really helpful.
Thanks and Regards
Tenzin

Hi,
On selcting the value from the drop down, we have one event ONSELECT.
Write the code in this event.
Get the attribute value to lV_xxxxxx using get attribute.
then using that you can fill the next DDBK attribute.
method wddoinit .
data:
        lo_nd_spfli type ref to if_wd_context_node,
        lo_el_spfli type ref to if_wd_context_element,
        ls_spfli type wd_this->element_spfli.
data:
      lv_carrid LIKE ls_sflight-carrid,
         itab_carrid type wd_this->elements_spfli,
         wa_carrid type wd_this->element_spfli,
         lo_nodeinfo_spfli type ref to if_wd_context_node_info,
         lt_value_set type wdy_key_value_table,
         ls_value_set type wdy_key_value.
lo_nd_spfli = wd_context->get_child_node( name = wd_this->wdctx_spfli ).
lo_nodeinfo_spfli = lo_nd_spfli->get_node_info( ).
select carrid
    from spfli
    into corresponding fields of table itab_carrid.
if sy-subrc = 0.
    sort itab_carrid by carrid.
    delete adjacent duplicates from itab_carrid comparing carrid.
endif.
loop at itab_carrid into wa_carrid.
    ls_value_set-key = wa_carrid-carrid.
    ls_value_set-value = wa_carrid-carrid.
    append ls_value_set to lt_value_set.
endloop.
lo_nodeinfo_spfli->set_attribute_value_set( name = 'CARRID'
value_set = lt_value_set ).
endmethod.
in the event of first DDBK, write the select statement wsing where condition of lv_XXX.
and append the record as above.
Regards,
sarath

Drop Down list in table with data from database table

Hi,
I have created an interactive form in WD ABAP.
In Context tab I have created the nodes as follows:
ZSOHEADER node with cardinality 1..1
|-> MATERIAL node with cardinality 0..n. Under MATERIAL node there are 2 attrib. MAKTX and MATNR.
I am fetching data from MARA table into an internal table IT_MARA.
The node MATERIAL is bound to internal table IT_MARA.
I have created a table with property ' Body rows vary depending on data ' .
I have only one row in table. The first cell of the row is a drop down field.
I have bind the field to the node MATERIAL->DATA->MAKTX.
Now the issue is even though I have created only one row in my table, in preview it is creating as many rows in the table as the no.of records in the internal table.
I want only one row with the drop down list containing all values of the internal table.
Kindly suggest what to do.
Regards,
Vinod

Hi,
In the WebDynpro Context, in the main node create another node like A1 with cardinality 0..n and in this node create attributes TEXT and VALUE.
Now goto method and in that method using code wizard read the node A1.
And use the below code snippet sample in your program, i.e. code this under respective method of the webdynpro.
*Declare the TYPES
TYPES : BEGIN OF TY_TABLE,
TEXT TYPE SOMETYPE,
VALUE TYPE SOMETYPE,
END OF TY_UOM.
*Define Internal Table and work area.
DATA : IT_TABLE TYPE STANDARD TABLE OF TY_TABLE INITIAL SIZE 0,
WA_TABLE TYPE TY_TABLE.
SELECT TEXT VALUE FROM TABLENAME INTO TABLE IT_TABLE.
lr_node_info->bind_table( IT_TABLE ).
And in the Adobe Form Layout
Go to Menu of the Adobe LiveCycle Designer:
Tools>Options..>DataBinding
In that window you just check the Show Dynamic properties Check Box.
Now for the Drop Down go the binding tab in object palette and click on the list items and there specify the Internal Table and specify the text as the internal table text field and value as internal table value field.
OR
From the WebDynpro Native Library Palette use the Value Help Drop Down and in object pallette goto binding tab and provide the form interface binding. Before this in the WebDynpro goto Context and for the particular field under the properties provide the search help as dictionary search help and specify the name of the dictionary search help.
OR
We have another method of setting the Text and Value to the DDL directly in the WebDynpro by coding in the methods, I dont have much knowledge on this.
Regards
Pradeep Goli

Columns in af:table rendering multiple times when filtering drop-down list

Technology: JDeveloper 10.1.3.0.4 SU5, ADF Faces/BC
Page design:
Master-detail jspx.
Each section is an af:table.
Drop-down lists created using instructions from http://www.oracle.com/technology/products/jdev/tips/muench/screencasts/editabletabledropdown/dropdownlistineditabletable.html?_template=/ocom/technology/content/print
Requirement:
Data in a drop-down list on a child record needs to be filtered based on data from one or more columns in the currently selected row of the parent record.
Issue:
Drop-down lists have been successfully filtered using a couple of different methods, however, any time the data from the parent record is used to filter the data the columns in the child af:table begin to render multiple times. Navigating through the parent rows may cause the child records to have the correct number of columns displayed or multiple copies of the columns displayed.
Removing any reference to the parent view object and hard-coding values instead causes this behavior to disappear.
Each of the following methods has been tried. Each filters drop-down list data correctly and each causes apparently random extra column renders.
1.     Cascading lists as per: http://www.oracle.com/technology/products/jdev/tips/mills/cascading_lists.html
2.     Drop-down list based on view object that takes parameters.
3.     Set where clause for drop down list in a method on the app module.
4.     Set where clause for drop-down list in a new selection listener method for the af:table.
Question:
Is there a solution available that will filter the drop-down lists correctly and prevent the extra columns from being rendered?
Thank you for any help that you can provide,
Joanne

bump

Selecting Top N records in a table using a slider or drop down list

Similar Messages

Maybe you are looking for