Firefox 3 used to have a drop down list under the back button for recent pages. How do I get this in FF4?

FF3 used to have a drop down list of the most recent pages that a tab had displayed under the back arrow button. FF4 does not appear to have this. How can I see history of what's been displayed in the tab say four or five pages back?

You can get the drop down list by either right-clicking on the back/forward buttons, or holding down the left button until the list appears.
If you want the drop-down arrow you can add it with the Back/forward dropmarker add-on - https://addons.mozilla.org/firefox/addon/backforward-dropmarker

Similar Messages

  • Updated my iPhone 5 to ios7, in the App store after installing updates I now have a never ending list of the Apps I've updated.  How do I get rid of the list after they've been updated?  In the previous version I did not have an annoying permanent list.

    Updated my iPhone 5 to ios7, in the App store after installing updates I now have a never ending list of the Apps I've updated.  How do I get rid of the list after they've been updated?  In the previous version I did not have an annoying permanent list.

    iOS 7 allows you to have your apps update automatically. Therefore, the list of what has been updated stays so that you can see what was updated, when and what the release notes say. It has been suggested that they list has a limit, much like Recents. Currently, there is no way for the user to delete the entries manually. Just try not to look at them.

  • How do I turn off the drop-down menu on the back button?

    I use a laptop and my hands aren't too dextrous. Every time I click the "back" button I get the drop down menu, which means I then need to move my hand back to the pad (slowly!) move the pointer, and try again. It can take me several attempts to go back one site now!
    I have searched for hours to find out how to turn this drop down menu off, to no avail, and even looked through all the settings in about:config in an attempt to find a way around this. It seriously impacts my ability to use my laptop on the web now, so if anyone can please come up with a way to get back to the old back button, with no menu when my slow old finger cannot move fast enough to get off the button, I would be very grateful.

    You can use that list and open the previous tab just above the one that appears bold and has a bullet.
    The current active entry has a bullet in front of it.<br />
    If you hover an entry in the tab session history list with the mouse then you see an arrow at the left side pointing left (Back) or right (Forward) to show the direction.<br />
    You can left click an item to open it in the current tab or middle-click or Ctrl left-click an entry in that list to open that link in new tab, just like you can with other links.<br />

  • Selecting Top N records in a table using a slider or drop down list

    Hi Experts,
    I have a query that  displays 1000 records ( say) in VC iview.
    Can i have a drop down list in the variable form to control the number of records displayed in the output table by the user .
    or can i have a horizaontal slider ( Min value is 2 -max 1000)  to display the number of records in the output table  selected by the horizaontal slider.
    basically iam having a requirement to give the user the capability to select the Top N records of the output table...where the user enters the N value in Drop downlist of variable form or user slides the N value using Horizontal slider
    Thnaks
    P.Navakanth

    Hi
    Yes it is possible. First you need to create 'Condition' in BEx query where you have to create 'TOP N' & 'N' should be a variable input. Then you will get this in 'Variable Screen' of a query. In VC for this same variable you can use slider. Use 'Select' function in the 'Action' of the slider & pass it to require table/graph.
    Try this, this will give you the required result.
    Regards
    Sandeep

  • I was trying to make a purchase from Amazon & a return but FIREFOX would not let me open drop down boxes in the purchase & return areas. I was forced to use IE to accomplish the deed. Can you investigate the problem?

    I was trying to make a purchase from Amazon & a return but FIREFOX would not let me open drop down boxes in the areas. I was forced to use IE to accomplish the deed. Can you investigate the problem? Thanx, David Deters

    Thanks for the welcome Karsten! I’ve checked the installer disks – which appear to have all the main pieces of software, but not iDVD. If you or anyone knows where it might be hidden that would be great. Thanks for all the other info too!
    Thanks Lennart – I don’t think my computer could support iLife ’05 as it is running Mac OSX 10.3.2 and I’ve just been looking at its system requirements which state it requires 10.3.4 minimum – if you know differently, please let me know. As an alternative I have considered getting iLife ’04, but your comment about iLife ’05 being the first version to support external drives worried me (“iDVD 5 is the first iDVD version that officially supports external burners“ does this mean there is an unofficial option for iLife ‘04? Perhaps a patch similar to the one mentioned by Karsten), does that mean iLife ’04 would not support an external Lacie DVD writer?
    What is the earliest version of Toast I’d be able to use (as a money saving option!)?
    Thank you both, and apoligies for my amateurish questions…
    Kevin.

  • How to use value in a drop-down list box as "With these Values" parameter?

    Hello, new user.
    I have a drop-down list box on Page 1, upon which the user can choose a study number. The List Box is named "P1_STUDY_NBR".
    Then I have a list, one entry of which goes to my master-detail form, which is Page 6. I would like it to go to the study number that the user choose on Page 1.
    In my target on the create/edit list entry, I put in "Page in this Application", "Page 6", then in Set these items, I put in
    P6_STUDY_NBR
    My question is what to use in With these values, where I want the contents of the P1_STUDY_NBR. I tried:
    &P1_STUDY_NBR
    and that does not work. If I put in one of the study numbers, like 336-00, then it does work, but I want it to pass the study number the user chooses in the list box. How do I refer to the contents of P1_STUDY_NBR?
    -Mary

    Yes, that does work, thanks. I'm now getting the default value I was putting in yesterday rather than an error message, so there must be something loading it, but I'll hunt around for what process might be doing that, or try re-creating the master-detail form again.

  • In Firefox 4, how do I get back the context menu for the drop down list of the Location Bar so I can Open Link in New Tab, which I did often in FF 3?

    Firefox 3 has a context menu for the drop down list of
    the Location Bar. One option on this menu I used often
    is "Open Link in New Tab" -- quite convenient.
    This context menu has disappeared in Firefox 4.
    Can I get it back?

    See also:
    *Tools > Options > Privacy > History: "Remember search and form history"
    *https://support.mozilla.org/kb/Form+autocomplete
    The "Use custom settings for history" setting allows to see the current history and cookie settings, but selecting that setting doesn't make any changes to history and cookie settings.<br />
    Firefox shows the "Use custom settings for history" setting as an indication that at least one of the history and cookie settings is not the default to make you aware that changes were made.<br />
    If all History settings are default then the custom settings are hidden and you see "Firefox will: (Never) Remember History".<br />

  • Using selected items from drop-down list in rest of page

    Hi,
    I hope I'm able to describe clearly what's the problem.
    So I'm implementing a form for the moment. It contains a drop-down list. The user has to select one item from it and as a result another drop-down list on the same page needs to be filled with a couple of options. I wanna do this without refreshing the page, cos else I have to retrieve all the values from boxes that were allready filled in. Is it possible?
    Greetings,
    Raf

    This cn be done with javascript. But you need to cache the data on first load of your jsp.
    regards

  • How to populate the values in the drop down list form the xml file ?

    I want to populate the drop down list values from a seperate xml file called ReferenceData. I created this file, which consists of a mapping entry in the form of ( key,value ) pair. Am mapping this xml file in to form by using rule named as getAppReferenceData.
    But the values are not getting populated in the form. And I have a doubt of, where should we keep that xml file? (under which path / folder ).

    what would help is if you showed what you do in the rule, either the code or a express trace of the rule.
    The other thing you need to know is where you want to get the file from. Yes java can read a file from anywhere on the system but there is a security layer in there which might prevent the file being opened. Have you allowed acces to the file via the security policy settings via java.io.FilePermission?
    WilfredS

  • Getting the rawValue of a Drop-Down list on the "change" event

    I am having problems getting the rawValue of a Drop-Down list on the "change" event. It seems that you have to select the same item twice in a row to get the rawValue to be the value of the selected item.
    ::dropdownlist onChange event::
    xfa.host.messageBox(this.rawValue);
    On the first time a value is selected you get 'null'. The second time the same value is selected, you get the selected value.
    Does anyone have any thoughts on why this is happening? Also, I CANNOT use xfa.event.newText, I need to use the rawValue of the dropdownlist.
    Thanks

    The change event occurs before the rawValue is changed. If you NEED to use the rawValue you'll need to use a later event. Perhaps you could use exit so that it gets triggered when the field loses focus?
    Chris
    Adobe Enterprise Developer Support

  • Drop Down List - Setting the Default Selected Item

    I have a drop down list in my application that gets populated by a remote database.  When you select an item from the list, a screen full of thumbnails is populated based on the selection.  We have decided that when the user gets to this component in our air application, that it looks too empty and barren.  All that displays is a drop down list with an empty screen.  So we would like to set a default setting for the drop down list so that when the user gets to this component, a screen full of thumbnails is awaiting them and they can change it if they want.  My first instinct was just to set the selectedIndex property of the drop down list to the value that we want as the default, and that works, but it only changes the label in the dropdownlist, it doesn't actually populate the screen with the thumbnails.  That is because when an item is selected, it has to be commited to the drop down list by a CLOSE event that then sets off the close handler that populates the screen with thumbnails.  So after looking at the documentation, I found that there is a method called closeDropDown that states the following:
    closeDropDown
    method
    public function closeDropDown(commit:Boolean):void
    Close the drop-down list and dispatch a DropDownEvent.CLOSE event.
    Parameters
    commit:Boolean — If true, commit the selected data item.
    When I use this method, nothing happens.  In fact if I add a listener for the CLOSE event, the close event isn't getting fired.  So I am a little befuddled.  The only thing that I can figure is that I am setting the selectedIndex and not the selectedItem before I call the closeDropDown method, and if you look above, the documentation vaguely states that that "If true, commit the selected data item".  Do I need to set the selectedItem and not the selectedIndex?  If so, I am not exactly sure how to do this since I am using a service to populate my drop down list which kind of makes the dataprovider a little unclear to me in the code because it gets replaced by an AsyncListView.  Here is what I have.
    <fx:Script>
         <![CDATA[
            protected function dropDownList_creationCompleteHandler(event:FlexEvent):void{
              getAllAudio_descriptionsResult.token = audiodescriptionsService.getAllAudio_descriptions();
              getAllAudioResult.token = audioService.getAllAudio();
         private function audioDescriptionsCallResponderHandler(event:ResultEvent):void {
              audioDesc = event.result as ArrayCollection;
         private function audioCallResponderHandler(event:ResultEvent):void {
              audio = event.result as ArrayCollection;
              audioDescDropDown.selectedIndex = 2;
              audioDescDropDown.closeDropDown(true);
         ]]>
    </fx:Script>
    <fx:Declarations>
         <s:CallResponder id="getAllAudio_descriptionsResult" result="audioDescriptionsCallResponderHandler(event)"/>
         <audiodescriptionsservice:AudiodescriptionsService id="audiodescriptionsService" fault="Alert.show(event.fault.faultString + '\n' + event.fault.faultDetail)" showBusyCursor="true"/>
         <s:CallResponder id="getAllAudioResult" result="audioCallResponderHandler(event)"/>
         <audioservice:AudioService id="audioService" fault="Alert.show(event.fault.faultString + '\n' + event.fault.faultDetail)" showBusyCursor="true"/>
    </fx:Declarations>
    <s:DropDownList id="audioDescDropDown" x="43" y="65" width="185" height="34" fontFamily="MyriadProSemiBold"
                        fontSize="15" skinClass="skins.VideoSkins.Video.DropDownSkin"
                        color="0xE6E6E6" selectionColor="0x054F7C" rollOverColor="0x007CBA"
                        creationComplete="dropDownList_creationCompleteHandler(event)" labelField="audioCatName"
                        itemRenderer="renderers.DropDownList3" close="DDLAudioCloseHandler(event)">
         <s:AsyncListView list="{getAllAudio_descriptionsResult.lastResult}"/>
    </s:DropDownList>
    I would really appreciated hearing from anyone who has experience or insight into setting a default for a drop down list and actually forcing it to execute that default selection.  Any thoughts at all would be helpful.  Thanks!

    I don't see your close handler in the code you posted, so if you provided it and I missed seeing it, please forgive me.  I'm a bit unclear on why the open and close of your dropdown list is so critical to your functionality.  It seems to me that the page of data would be tied to the item selected in the drop down (which to my mind is the only purpose for the drop down to be there).  So why do you first need to open and close the drop down, rather than just taking the selected value and doing whatever you'd normally do with it to populate that page?
    What I'm getting at is that I'd expect that page to be a separate component that would just have a property for the selected "thing", and that you could populate it either manually, as I suggested, or through the close handler on your drop down--I wouldn't think that there should be a need to go through the close handler every time.  Even if you don't have it implemented the way I'm thinking, you may want to think about whether you need to go through the close handler every time, or whether you could break it out so that the close handler simply determines which item to select, then jumps to another function that actually does something with the selected value.  That way, you don't have to go through the overhead of opening and closing the drop down if you need to change its value programmatically.
    HTH;
    Amy

  • Where is the drop down list with "edit web part" for a list??

    In Sharepoint 2010, there was a drop down list to the far right of a list.  One of the options was to Edit Web Part.  In Sharepoint 2013, I can't find the drop down list.  Nothing is to the right of my list and mouse overs down't reveal
    anything.  I am trying to get to that area to change my toolbar type.  Any clues as to where the "edit web part" has gone to?

    I've been able to edit Web Part properties for weeks, but a few days ago, I could no longer do it, either by using the checkbox in the upper right corner of the web part or by using Web Part Properties in the Web Part tab.  It's greyed out.
    Then yesterday I could do it again and today I can't.   An intermittent problem!
    No one has changed any Sharepoint Admin settings.
    Anyone have any ideas?  They would be greatly appreciated.

  • Setting up multiple frequency options from the drop-down menu on the subscriptions button

    I have set up four sponsorship (subscription) options using the drop-down menu on the subscription button. Sponsor an:orphan for $35 at monthly frequencywidow for $50 at monthly frequencyorphan for $420 at yearly frequencywidow for $600 at yearly frequency I have checked the settings for the button and the yearly frequency is definitely selected for the two last options, but when the button is clicked the PayPal landing page recognises the monthly frequency only. Is it possible to have two sets of frequency within the one set of options?

    You can use that list and open the previous tab just above the one that appears bold and has a bullet.
    The current active entry has a bullet in front of it.<br />
    If you hover an entry in the tab session history list with the mouse then you see an arrow at the left side pointing left (Back) or right (Forward) to show the direction.<br />
    You can left click an item to open it in the current tab or middle-click or Ctrl left-click an entry in that list to open that link in new tab, just like you can with other links.<br />

  • How to populate data from dynamic drop down list to the text field

    Hi,
    I tried to populate data from dynamic drop down list to city field. I would like to concat data from drop down list.When selecting add button to add the item and select item from drop down list, data should be displayed in the text field. However, Please help. I spent alot of time to make it works I am not successful.
    Please see the link below.
    https://acrobat.com/#d=SCPS0eVi6yz13ENV0cnUdw
    Thanks for your help
    Cindy

    Hi Rosalin,
    Loop the hidden table, get the values and populate drop down in each iteration.
    DropDownList1.addItem("Text","Value");
    You can use one more solution for this scenario. If it is a matter of 2,3 dropdowns, put three dropDowns in the form layout and give seperate static data binding to them. At run time make the dropDowns hide/visible as per the requirement.
    Hope this helps.
    Thanks & Regards,
    Sanoosh

  • Hide id from drop-down list at the top of the detail tab

    Hello Nakisa experts!
    I have one more question about Nakisa OrgChart 4.0 SP 1.
    How can I hide position and org unti id from drop-down list at the top of detail tab, see picture below:
    Thanks in advance.

    I'm not sure you're going to be able to change this.  I think (but I'm afraid I don't know for sure) the section is defined by \WEB-INF\uitemaplates\com\nakisa\manager\omg\ui\subucs\sectionDesigners\DetailHistoryButtonSectionSubUC.xhtml, which after a quick search through the application looks as though it might be populated by a NakisaTrollBin.jar ... which isn't really something you should be looking to edit.
    Nakisa do often write in various settings that can allow features to be tweaked and enabled/disabled.  It could be that there's something you could add into SettingsResources to apply the change you require, but you would need to contact Nakisa about this as they don't document all of these options.
    All this being said I would query why this is being done.  It is not uncommon to say have multiple positions with the same name - e.g. HR Administrator might exist in several org units.  If you are looking through several identically named org units or positions, the unique identifier is going to be the object's ID.  As such it seems most logical to me to keep the ID in the history to allow a user to discern the difference between identically named positions/org units.
    Regards,
    Stephen.

Maybe you are looking for