Selection area not big enough when using UITableViewCellAccessoryDetailDisc

Hi
Am setting accessoryType property to UITableViewCellAccessoryDetailDisclosureButton on my UITableCell which is working fine except the clickable area is tiny and can only be selected if you sharpen your finger to a fine point. Any idea how to make it bigger ?
Thanks
Manny

You can check the 4G Coverage Map and also sign up for 4G LTE Updates to get the latest information sent right to your inbox.

Similar Messages

Date selection will not print properly when using Microsoft Date and Time Picker Control 6.0 in Excel 2010

I have created a field input worksheet in which the user identifies start and end dates for training sessions, using the Date and Time Picker Active X Control. It works fine on-screen, but when the worksheets are printed, the dates that were selected
using the date picker calendar print out in an unreadable, huge font. The large font also appears in the print preview mode. I've tried modifying various properties in design mode, but nothing that I have tried will correct the problem.
Any ideas?

The DTPicker seems to have some bugs in it when used on a worksheet. I have overcome the above by setting the size properties to the same size as a cell and the Linked cell property to the
cell under the DTPicker. (Even setting the Linked cell had problems with an error message referring to the Check box property to be set to true so I just set it to true and inserted the linked cell and set the checkbox property back to
false.)
Then the VBA code below that Hides the DTPicker after a date is selected and unhides the DTPicker when the linked cell with the date is selected. The code is for 2 DTPickers so you will need to edit to suit your requirements.
Caveat: If the DTPicker is visible then you can't hide it by selecting the same date again. If this occurs then it is a multi step operation. First select another date and the DTPicker will hide, then click on another cell then back on the cell with
the date to unhide the DTPicker and then select the correct date.
Hope it helps and feel free to get back to me with any questions etc.
Private Sub DTPicker1_Change()
    Me.DTPicker1.Visible = False
End Sub
Private Sub DTPicker2_Change()
    Me.DTPicker2.Visible = False
End Sub
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
    Select Case Target.Address
        Case "$E$5"     'This is the linked cell for DTPicker1
            Me.DTPicker1.Visible = True
        Case "$E$13"    'This is the linked cell for DTPicker2
            Me.DTPicker2.Visible = True
    End Select
End Sub
Regards, OssieMac

Some of my AOL mails are not loading properly when using Firefox, they do come up when I use the AOL desktop, but they are S O SLOW

I have been using Firefox for a long time now since AOL became
S O SLOW with their Desktop Version in loading up mail.
But in the last two months I have been loading my AOL mail and some of mine and my husband's do not come up at all, even when they are forwarded by other people.
The header is there and it says the mail was loaded, but nothing in the actual page comes up

OK you need to upload these images to your remote server because they are missing from the server or that they have gone to a different folder.
http://www.elchocomining.net/double%20drawings/Florentino.jpg
http://www.elchocomining.net/double%20drawings/Mujer+matracaA.jpg
http://www.elchocomining.net/drawings%20/DJMujerarreglandocanal.jpg
http://www.elchocomining.net/drawings%20/DibujoProhibido.jpg
http://www.elchocomining.net/drawings%20/LTCocinaA.jpg
http://www.elchocomining.net/drawings%20/BbTrilladoradeArroz.jpg
http://www.elchocomining.net/drawings%20/TallerCoserA.jpg
In future always define your site correctly with all folders and file names without spaces in them. For example "drawings 20" is not a good name. You should rename it to "drawings20".
When you have corrected this especially when you have uploaded the photos again then they will appear all right on the page. after that you need to validate your pages for correct HTML and CSS but this can wait for now.
Good luck.

Up and down arrow keys are not working properly when using SQL CLI on Linux

Every time I hit up, down, left, and right arrow keys to return to a previous sql command I got ^[[D, please any hints to fix this issue?
The backspace works fine with me. I tried to use stty to fix this issue with no luck.
Thanks
Mohamed

Which SQL client and Linux version are we talking about?
Assuming you are using the Oracle sqlplus client... it does not support command line editing and history using the arrow keys. For this to work you will have to install a product called Readline Wrapper. See my answer at the General Database forum:
sqlplus command line editing

I am trying to connect a Macbook Pro to a projector for a Powerpoint presentation. When I use a VGA cable, the color of the projected images are not good. When I use a USB cable, the projected image includes the presenter notes on my computer screen?

I am trying to connect a Macbook Pro to a projector for a Powerpoint presentation. When I use a VGA cable, the color of the projected images are not good. When I use a USB cable, the projected image includes the presenter notes on my computer screen?

To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
and select the Library that you moved. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.
Your first option didn't work because you imported one Library to another. Every version and thumbnail is imported like a distinct photo, you lose all your Albums, Keywords etc., the link between Original and Previews is destroyed, the non-destructive editing feature is ruined and so on. In summary: it's mess.
Your second option didn't work because you simply referenced her library on the old machine.
Regards
TD

My open tabs are not being remembered when I close and re-open Firefox 4 even though I selected this feature in Options.

My open tabs are not being remembered when I close and re-open Firefox 4 even though I selected this feature in Options. Can anyone tell me why?

App tabs and Tab Groups (Panorama) are stored as part of the session data in the file sessionstore.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]
* http://kb.mozillazine.org/Session_Restore
Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History" if Firefox is closed.

HT4293 I have an Apple monitor model A1316 is using for Windows computer, but I could not adjust the brightness. The monitor is not bright enough when I turned off the lights in my room.

I have an Apple monitor model A1316 is using for Windows computer, but I could not adjust the brightness. The monitor is not bright enough when I turned off the lights in my room.

Have you plugged the USB cable into the computer also as the brightness is controlled over USB. If this does not work, you would need the Apple Display Driver for the version of Windows that you are using. The display driver is part of BootCamp software that you may be able to find online

In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?

In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?

Please don't post the same question multiple times!

How can I be certain the contact list in my iPod touch updates my computer Outlook contact list when I sync and not go the other way? The options in iTunes are not specific enough.

How can I be certain the contact list in my iPod touch updates my computer Outlook contact list when I sync and not go the other way? The options in iTunes are not specific enough. In other words, I want to replace the information in my computer Outlook contact list with the data from my iPod touch.

How is your iPod configured to sync music from your iTunes library? In other words, what options and configurations do you have enabled from under the iPod's Summary and Music configuration panes in iTunes?
B-rock

Numerator in Unit of Measure not big enough

Hi,
The numerator, field UMREZ, of the unit of measure has a maximun lenght of 5 digits ( maximum of 99999 ). But for certain conversion I need (in MM02-> aditional data->tab units of measure):
120000 EA = 1 ROL
How can I do this without entering something bigger than 99999?
I have thought in three alternatives:
1.- Modification of that data domain, so that it can be stored up to 999999.
2.- Use decimals in the denominator , so that I have something like 12000 EA = 0,1 ROL.
3.- With an auxiliar unit of measure EA2 ( created via CUNI, linked to EA): 10 EA2 = 1 EA :::::and then::::: 120000 EA2 = 1 ROL.
I havent been able to complete the 2nd and the 3rd. ANd I want to avoid the first...
Do you know if something like this can be done? if so, how????
I have found post UOM conversion not big enough but I could not find any usefull answer in there ...
Many thanks in advance.
Aaron

Hi,
Yes, I had already read this note, thanks for the info anyways.
They describe exactly my case:
Example 3: Too large numerators and denominators
                       When 120000 CM3 = 0,2 tons (TO), you can no longer save numerator and denominator of conversion ratio 600000 CM3 = 1 TO as numerator and denominator may have maximally five digits.
                       Here, you must either select a larger volume unit or a smaller unit of weight: With DM3 the conversion ratio would be 600 DM3 = 1 TO, with KG the conversion ratio would be 600 CM3 = 1 KG.
                       Generally, the alternative units of measure and the base unit of measure should result in quantities that are in the same dimension since the conversion factors may not be larger than 99999/1 and not smaller than 1/99999.
But I can not change the Basic Unit of Measure, because the Material has already movements, and I dont know how to create another unit of measure (let say EA2) linked to EA with a the value 1 EA2 = 10 EA. In this case I could use EA2 in the material with the conversion 12000 EA2 = 1 ROLL.
Is this possible? How can I create this unit? in CUNI I can create a new UOM but I dont see how to link it with an existing one ( create a conversion between them ) .
Thanks!!

Dimensions set to Selectable are not selectable w/in Smart View Data Forms

When trying to use a data form by clicking "Select Form" in the Hyperion toolbar in Excel (not exporting from webspace), Dimensions that are defined as Selectable are not actually selectable within Smartview. Below is a portion of the script:
BackgroundPOV=S#***.Y#***.w#***.V#***.I#***.C4#***
SelectablePOVList=P{***}.E{***.[Base]}.C1{***.[Hierarchy]}
Within the web, the form works fine and everything selectable is selectable. Within smart view, only Entity is selectable. Any insight would be greatly appreciated.
SV Version 11.1.1.3.500
HFM 11.1.1.3
Excel 2007
Edited by: JL on Aug 4, 2011 12:36 PM

I have found this and its generally because the dimension is referenced in the column
i.e Year and period is displayed in the column.
In HFM you can select the members from the POV but when opening in SmartView you can't
Solution is to remove the dimension from the col or row.
Thanks
G

Our illustrator files are not showing up when uploaded to creative cloud.

Our illustrator files are not showing up when uploaded to creative cloud. They are visible sometimes when we turn on and off the layers. Please help thanks.

If you feel that you have enough evidence of the symptoms, use the feedback at http://www.apple.com/feedback/itunesapp.html to let Apple know. The "feedback type" of "bug report" has been removed from the iTunes feedback, so I suggest you use use "Other".
You will not receive any feedback from them, but they do read the submissions and act upon them. It can take a while, and more than one iTunes update before the issue is resolved.

Have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely.

have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely

Dear Zak,
thank you very much! Your information solved the problem immediately!
Best regards,
Philipp Frank
New website
www.philippfrank.at<http://www.philippfrank.at>
Dipl Ing Philipp Frank
1010 Wien
Jakobergasse 4/14
+43 1 513 22 83 19
+43 650 250 5000
[email protected]<mailto:[email protected]>
www.philippfrank.at
Von: Zak Williamson (Adobe)
Gesendet: Montag, 23. Juni 2014 20:40
An: Dipl Ing Philipp Frank
Betreff: have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely.
have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely.
created by Zak Williamson (Adobe)<https://forums.adobe.com/people/ZakWilliamson%28Adobe%29> in Help with using Adobe Muse CC - View the full discussion<https://forums.adobe.com/message/6488371#6488371>

After updating my Macbook Pro retina display to os x yosemite 10.10.2, the mause and track pad locks, and do not respond especially when using the Mac for a long period, please help, how can I solve this, I do not like feel like in windows, so I paid

after updating my Macbook Pro retina display to os x yosemite 10.10.2, the mause and track pad locks, and do not respond especially when using the Mac for a long period, please help, how can I solve this, I do not like feel like in windows, so I paid good money for this mack, I feel calm

Hi Buterem,
I'm sorry to hear you are having issues with your MacBook Pro since your recent Yosemite update. I also apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having intermittent but persistent responsiveness issues with your mouse or trackpad, you may want to try using Activity Monitor to see if these incidents correspond to occupied system resources, especially system memory or CPU. You may find the following article helpful:
How to use Activity Monitor - Apple Support
If the entire system hangs or locks up (for example, if the system clock freezes and stops counting up), you may also be experiencing some variety of Kernel Panic. If that is the case, you may also find this article useful:
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
Regards,
- Brenden

RPC Server not Available error when using Windows Fax & Scan under Windows 7

RPC Server not Available error when using Windows Fax & Scan under Windows 7

Hi,
On current situation, please remove the old fax account and re-add a new fax account in Windows Fax and Scan, then check if this issue sill exist. For more details, please refer to following similar thread and artilces.
RPC Server not Available error when using Windows Fax & Scan
under Windows
The local fax account is inaccessible after you rename a Windows Vista-based computer
Cannot send fax from Windows Vista/Windows 7 PC with “RPC Server not Available” error message
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
make sure that you completely understand the risk before retrieving any suggestions from the above link.
If any update, please feel free to let me know.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Selection area not big enough when using UITableViewCellAccessoryDetailDisc

Similar Messages

Maybe you are looking for