Selection condition in the infopackage for initializing delta

How does the selection condition in the infopackage help in initializing delta?

Hi,
You can enter multiple single valus for any field in the infopackage. Just select the row for material type and then click on the insert duplicate button ( + sign ) which is at the bottom letf hand side in the 'Data Selection' tab within the infopackage. You will usually find this 'insert duplicate' icon next to the 'Check' push button.
You can insert as many rows as you want for material type by select the material type rown and clicking on this icon. You can then enter the three values in the three rows for material type.
Regards,
Shilpa

Similar Messages

  • Selections conditions at the Infopackage

    Hi,
    My Requirement is to load data for the selection conditions of Current month+12 periods and Current Month-24 periods for the Calmonth characteristic by writing a routine at the infopackage level.
    Is there any standared function module for caluclating the year and period using the system date.
    If I use 'DATE_TO_PERIOD_CONVERT' then this would give me the year and period but that needs my fiscal variant.
    Could some pne help me with this.
    Regards,
    Vamsi

    Hi Ajay,
    Could you please tell me whether this code works out for +12 months..
    Data : today like sy-datum,
          current_month(6)  type C,
           I_MONTH    TYPE I,
          I_YEAR     TYPE I.
         data: l_year like T009B-BDATJ,
          l_period like T009B-POPER.
    data: l_fiscperlow like l_t_range-low.
    data: l_fiscperhigh like l_t_range-high.
      today         = sy-datum.
      current_month = today+0(6).
      l_year        = today+0(4).
      l_period      = today+4(2).
    l_fiscperlow = current_month.
        Add 1 to l_year.
            concatenate l_year l_period+1(2) into l_fiscperhigh.
          l_t_range-low = l_fiscperlow.
          l_t_range-high = l_fiscperhigh.
          l_t_range-option = 'BT'.
          l_t_range-sign = 'I'.
    Regards,
    Vamsi

  • ABAP routine in the infopackage for Multiple Selection

    Hi experts,
    I want to include a abap routine in the infopackage for Multiple Selection so that I can fetch only the required Material Numbers when the InfoPackage is schedule. As I have the constraints that I have to select certain Material Numbers only, that are not in series - so I cannot select"BT' fuction. Tell me what ABAP Code will work in this scenario.
    Kind regards,
    Rajesh Giribuwa

    Hi,
    The Routine will have to use 'EQ' operator and Append each selections to the Structure.
    ABAP Routine
    InfoPackage definition for Bespoke SIS Structure
    Infopackage routine !
    Regards
    Happy Tony

  • Selection in the Infopackage for multiple values...

    In the Selection package of the Infopackage(full mode) , I want to restrict the selection of the data to three values out of all the values.
    Is it possible.
    I cant give it in the From and To , its not in sequence.
    The field for which I want to select the data is Material Type.
    Please let me know.
    Thanks , jeetu

    Hi,
    You can enter multiple single valus for any field in the infopackage. Just select the row for material type and then click on the insert duplicate button ( + sign ) which is at the bottom letf hand side in the 'Data Selection' tab within the infopackage. You will usually find this 'insert duplicate' icon next to the 'Check' push button.
    You can insert as many rows as you want for material type by select the material type rown and clicking on this icon. You can then enter the three values in the three rows for material type.
    Regards,
    Shilpa

  • Wht is the relevant for BW Flag option in the infopackage for loading Hier

    Hello Gurus,
    Whta is the relevant for BW Flag option in the infopackage for loading Hierarchies? What happens when you turn this on?
    Thanks
    Simmi

    As the hierarchies are stored in combination with the OLTP system, when you tend to load from a flat file, the system doesnt allow you to maintain this feature, as this hierarchy would be relevant to BI.
    Diagnosis
    The relevant hierarchies in BI are stored according to the combination DataSource/source system.
    If you want to change the selection of BI-relevant hierarchies, this change is effective for all InfoPackages that have been created for the same DataSource/source system combination.
    Procedure
    Check all other InfoPackages for DataSource 0COSTCENTER_0101_HIER and source system PRDCLT100 to see whether the change executed is also appropriate for these InfoPackages.
    Procedure for System Administration
    If you want to load a hierarchy in a different InfoPackage (which will be marked as non BI-relevant as a result of your changes) the selections made for this InfoPackage will be lost and The InfoPackage can no longer load.
    Errors will occur when you start the InfoPackages. The monitor produces an error message to say that a valid hierarchy selection has to be made.

  • WHY does the finder insist on rearranging the files in a folder in alphabetical order even when I have selected "none" in the preferences for file organization?

    WHY does the finder insist on rearranging the files and/or documents in a folder in alphabetical order even when I have selected "none" in the preferences for file organization? Even after I numbered the documents/folders to keep them in my preferred order, it will still displace them occasionally. This is becoming increasingly frustrating!
    Is this a "Pages" issue or "FInder"? The vast majority of documents I use are in Pages, but there are also Numbers, PDFs, jpegs and a few other applications involved. This never happened before I upgraded to Mountain Lion; in Tiger, the documents (mostly Appleworks) and files stayed where I wanted them to be.
    I am visually oriented, and prefer to arrange items in a folder in an order that makes them easier for me to access, which is often NOT alphabetical.
    Can anyone suggest a solution? Please??
    Thank you.
    Sara

    nbar,
    Thank you for your reply.
    However, I do not understand what you mean by "user account." I am the only user, and can find no options for "user" or "guest." The parental controls have always been off, as there are no other people who have access to my computer.
    Frank,
    Thank you for your reply.
    All my documents, files and folders are in icon view, Arranged By: none in both view and view options. This arbitrary rearranging does not happen all the time, only when I make a substantial change to one of the documents in the file or folder. I'm not sure what you mean by "column heading."
    MichaelLAX,
    Thank you for your reply.
    I know, to my sorrow, that Appleworks does not work with Mountain Lion. I spent at least three months converting approximately 2,000 Appleworks documents to Pages, Numbers, Bento (for databases) and Touchdraw (for drawings). So this is not the problem; but as I said, I did not have this rearranging problem with Appleworks - the icons stayed where I wanted them to be. I still miss the ease and reliability of Appleworks, darn it!
    Frank,
    Thank you for your second reply.
    I do have the Sort By: in view options as well as in view set to "none."   The finder still insists on rearranging, but only when I have made a substantial change to a document in that file or folder.
    Any futher thoughts?
    xdab, 
    Thank you for your reply.
    "Are you are using icon view, but for some reason the finder moves files around? is that the problem?"
    YES!! This is exactly the problem.
    "If this operation is successful then erase the original and rename the new one to the name originally chosen by the user."
    This seems like a lot of trouble, especially as I often work on several documents at the same time.
    "By the way, the finder has a "clean up by" menu that rearranges icons in one of the standard orders, there are shortcuts that produce the same effect, for example <option><cmd>1 sorts them by name. Is it possible that this shortcut was typed by mistake without you noticing?"
    I do know about this "clean up by" option, and avoid it like the plague! So I doubt this is the issue, and I infrequently use keyboard shortcuts like this anyway.
    Thanks all who replied. None of the suggestions seem to work, however. Any others out there?
    Regards,
    Sara

  • SV004 - I need to change the selection condition in the view: J_1BT001W

    Hello guys,
    Can you please help me with a topic ?
    How can I change the selection condition in the view: J_1BT001W ?
    I was trying to use se11, but says that J_1BT001W does not exist.
    Thanks a lot,
    Jordan

    Hi Jordan,
         The correct view name is J_1BT001WV and not J_1BT001W. It is made of table joins - T001W T001K T005. Please let me know if this answers your question.
    Regards
    Ram

  • Is there a way to place markers in a multicam clip, and then have those same markers carry over when you select part of the clip for a project (or various projects)?

    Is there a way to place markers in a multicam clip, and then have those same markers carry over when you select part of the clip for a project (or various projects)?

    Thanks. Beforehand, I was double clicking on the multicam clip and forced to make a marker on either the Cam A or B. I realize now that I can do it in the Event Browser. THANK YOU.
    Considering I may create >20 markers per clips for around 10 different interviews, I wish there was a way to bring the Event Brower to the bottom half of the FCPX windows, to resemble the screen orientation when I'm working in an actual project (one could do this in iMovie), and this way the markers could be listed to the left without having all the other event clips around it. Is that clear? Is that possible?

  • How to creat the infopackage for RDA?

    Hi all;
    How to creat the infopackage for RDA?

    Hi,
    Check in
    Real time infopackage
    Re: Types od DTP and their uses in BI 7.0
    Re: Real-Time Data Acquisition
    Thanks
    Reddy

  • I want to check the status of application No.  For it is written in my account was canceled and I did not do so I urgent news about his condition and the reason for canceled I redial the same time as the sender befo

    Thank you for your attention
    I want to check the status of application No. W439602096
    For it is written in my account was canceled and I did not do so
    I urgent news about his condition and the reason for canceled
    I redial the same time as the sender before you
    We are waiting for you

    This is a user to user forum. You are not talking to Apple here. We cannot help you; you will need to contact wherever the order was placed.

  • Error when scheduling the infopackage for loading Master data attributes

    Hi,
    Iam getting the following error message when scheduling this Master data Attributes ZIP_0PLANT_ATTR_FULL..( Flexible update of Master data info objects)..
    In Data load monitor error i got this following error message.
    Error message when processing in the Business Warehouse
    Diagnosis
    An error occurred in the SAP BW when processing the data. The error is documented in an error message.
    System response
    A caller 01, 02 or equal to or greater than 20 contains an error meesage.
    Further analysis:
    The error message(s) was (were) sent by:
    Update rules
    Thanks

    HI,
    A caller 01, 02 or equal to or greater than 20 contains an error meesage This is an Idoc error. Please check the Idocs :
    1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
    Also see if there is any 'sysfail' for any datapacket in SM37.
    2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
    3) RSMO see what is available in details tab. It may be in update rules.
    4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
    5) Check in SM58 and BD87 for pending tRFCs and IDOCS.
    Once you identify you can rectify the error.
    If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
    If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
    If you feel its active and running you can verify by checking if the number of records has increased in the data tables.
    SM21 - System log can also be helpful.
    Thanks,....
    Shambhu

  • Deploying selected projects to the server for testing?

    I have an application that is comprised of several self-contained projects. Is there a way to deploy two of the projects within the application without deploying the rest of them?
    For example, one of the projects is a stub while the other is the real code. I would like to deploy just the project with the "real" code and not have the stub project be deployed at all. But, I am finding that the jar files from both projects are always deployed to the server. I'd like to be able to turn on/off deployment of individual projects to server for testing. Anyone know how to do this?
    Thanks!

    Hi,
    Can you provide additional information on which version of Workshop you are using. With workshop studio, if you need multiple projects to be deployed simultaneously, you can choose the manual deployment option available in the server configuration process.
    Unfortunately in WLW 8.1 this cannot be done. You will need to remove the project from the application to have it undeployed from the server
    cheers
    Raj

  • Selection Condition In Infopackage

    Hello,
      Is there a way to use a single infopackage by passing different selection conditions thru' abap routine, for delta init.  We require this as we have to extract data based on the logged-in user.
      Any help is highly appreciated.
    Thank you very much,
    Raj

    Hi Ronald,
    I am coming back with further infn after a long time as i was strucked with other development area, actually our client requirement is Data has to be loaded on company wise .. means the respective responsible person only carryon loading person as per his profile(Authorisation)load has to be happen...this is one requirement,
    one more is (whether in this scenario can we go for Delta)
    we enhanced the Dtasource with new field in R/3 and when we are trying to make it selction condition in infopackage we are not getting filtering as per that ..
    could u or anyone who knows through a light on this..
    Thanks in advance
    BRB

  • CostCenter Hierarchy selection in the Infopackage

    Hi Everyone,
    For CostCenter hierarchy, in the Infopackage Hierarchy Selection tab, I can able to find the Parent Node for loading, but there is no Child node available.
    Can anyone help on how to bring the child node into the Hierarchy selection tab, and also how to check the Hierarchy node in ECC side.
    Thanks in advance,
    Satish.

    Hi,
    You can enter multiple single valus for any field in the infopackage. Just select the row for material type and then click on the insert duplicate button ( + sign ) which is at the bottom letf hand side in the 'Data Selection' tab within the infopackage. You will usually find this 'insert duplicate' icon next to the 'Check' push button.
    You can insert as many rows as you want for material type by select the material type rown and clicking on this icon. You can then enter the three values in the three rows for material type.
    Regards,
    Shilpa

  • Document selection for initial transfer by date of creation does not work

    Hello gurus,
    we are trying to initially transfer purchase orders from ERP to GTS. In /SAPSLL/DS_D_MM0A_R3, when we try to select the documents by giving a date for u2018created onu2019, no documents are transferred (u2018No data was found for the selection criteriau2019, Message no. /SAPSLL/PLUGINR3205).
    But when we select the documents using ME2L and insert the document numbers in the appropriate field in /SAPSLL/DS_D_MM0A_R3, all documents are transferred just fine.
    So obviously the selection by date does not wok properly. Or are there other hidden criteria ERP uses to select the documents to transfer (e.g. only those without GR/IR)?
    Thanks in advance
    Alicia

    Hi Alicia,
    just had a customer message with the same issue.
    The program for initial transfer selects the data frm table EKKO.
    Please check for those 3 documents, if the AEDAT in EKKO is the same date as in the selection of ME2L.
    It could be that in EKKO the AEDAT is a different date. We are selecting from this table.
    I believe if you choose the documents in SE16 EKKO only by the date from ME2L you won't find them as well.
    I believe the difference is between the 'Creation Date' and the 'Document Date'.
    Best regards, Christin
    Edited by: Christin Angus on Sep 14, 2010 2:24 PM

Maybe you are looking for

  • Ipod 4th Generation Not charging

    HELLO, I have a IPOd 4th generation, I recently updated my ipod to the newest version iOS 5.1 when I plug in. Into my computer or a wall charger it says that charging is not accesilby with this accesory. it charges for a few minutes and than says tha

  • I can no longer print from Ipad.

    Suddenly I can not print from my Ipad2 to hp photosmart 5510. Worked fine until yesterday. Nothing chnaged. Both hooked up to wireless network with all udates current. I tried everything but need help to get this working again.

  • LR2 File naming on import problem, date and time not from photo

    Hi all, I think I've run into a bug or inconsistency regarding the file naming in LR2. All my photos are named after the template YYYYMMDD-HHMMSS-XXXX.dng, where XXXX is the original file ID number and the rest is the capture date and time. This has

  • Several Payment Methods in VA01

    Hello all Does anyone know if we can have several payment methods in a sales order? When I create a sales order (VA01) I could choose one payment method, but if a customer pays for example 50% with cash and the other 50% with a credit card, Could I e

  • Rotate a Cylinder within the x,y,z axis

    I want to set a Point3d object as an argument in the method and then the cylinder to orientate accordingly to that point (maybe vector). Is this possible?