Selection of range in variable

Hi Gurus
I have following requirment regarding the selection in variable. We want to populate the exit variable on the employee and populate it with the all the employees in the cube for particular fund center based on the fund center selected in the fund center variable and the user should be able to select multiple values from the available values and run the function only for those employees.
I need following information regarding the above requirment.
1. The function module to read the fund center variable once the user selects it for using in the function module for employee variable.
2. How to achieve the multiple value selection in the variable.
3. Sample code for reading cube for employee values.
Thanks
Raj.

Dear all,
I am facing one problem while fetching data.
select *
from KONV
into CORRESPONDING FIELDS OF TABLE LT_conditions
where KNUMV = ls_po_header-DOC_COND
AND   KPOSN IN KPOSN
AND   KSCHL IN EXC.
Here KPOSN and EXC are ranges.
The range EXC has one value ie EXC-LOW = 'ZAFC'.
    range KPOSN has no records.
In my internal should have records with ZAFC(matching with ZAFC).But my internal table has something other records(not matching with ZAFC)
please help me to solve this problem.
-Jaheer

Similar Messages

Range of Variable in Web Interface Builder

Hi,
I have created a Web Interface Builder in BW-BPS. I have created Cost Center as a Variable. However, I am unable to get this range of cost centers say 1001 to 1005 in Web Inteface Builder.
Whereas, in the Planning Folder, this works fine and I am able to select the range of Cost Centers from 1001 to 1005.
The issue is only with WEB INTERFACE BUILDER.
Looking forward for some valueable inputs.
Regards,
Ravi

Hi Mayank,
Thanks for your reply.
I will also look at the different options given.
I also found the following thread is more useful.
BSP Value Help Input Field and Select-Options Ranges
I will let you know on this.
Regards,
Ravi

Dynamic Select Options/Ranges Maintain and Display in my screen

Hi I am trying to figure out if I can create a screen which will will read various select-options I have stored in a custom table but am having trouble finding something which will allow me to display each of 'select-options' in my dynpro... has anyone ever done this?
I'd rather not reinvent the wheel or mimic - does anyone know of a way to basically use a loaded range and display it on a screen for display or maintenance using standard SAP routines/classes?
Thanks in advance!
Roc..

@Adrian - I got your email regarding the code sample, here is a quick example of how to popup a dynamic selection for up to 5 tables...
*& Report ZRS_DYNAMIC
REPORT zrs_dynamic.
* START Dynamic Range Selection Definitions
* Definition of the selection_if variable, which is used to reference
* the selections obtained
DATA: gv_selid TYPE rsdynsel-selid.
* Definition of the TABLES_TAB table for use in providing the list of
* fields available for creating select options from
DATA: gt_tables TYPE STANDARD TABLE OF rsdstabs.
DATA: gs_tables TYPE rsdstabs.
PARAMETERS: p_tab1 TYPE tabname DEFAULT 'KNA1',
            p_tab2 TYPE tabname DEFAULT 'KNB1',
            p_tab3 TYPE tabname DEFAULT 'KNC1',
            p_tab4 TYPE tabname DEFAULT 'KNVV',
            p_tab5 TYPE tabname DEFAULT 'KNVP'.
START-OF-SELECTION.
gs_tables-prim_tab = p_tab1 .APPEND gs_tables TO gt_tables.
gs_tables-prim_tab = p_tab2 .APPEND gs_tables TO gt_tables.
gs_tables-prim_tab = p_tab3 .APPEND gs_tables TO gt_tables.
gs_tables-prim_tab = p_tab4 .APPEND gs_tables TO gt_tables.
gs_tables-prim_tab = p_tab5 .APPEND gs_tables TO gt_tables.
* Definition of Table which includes the select-option range for field
TYPES: ty_selopt_t TYPE rsdsselopt OCCURS 10.
* Definition of field name and select option range table
TYPES: BEGIN OF ty_frange,
           fieldname TYPE rsdstabs-prim_fname,
           selopt_t TYPE ty_selopt_t,
         END OF ty_frange.
TYPES: ty_frange_t TYPE ty_frange OCCURS 10.
TYPES: BEGIN OF ty_range,
           tablename LIKE rsdstabs-prim_tab,
           frange_t TYPE ty_frange_t,
         END OF ty_range.
TYPES: ty_range_t TYPE STANDARD TABLE OF ty_range.
DATA: it_ranges TYPE ty_range_t.
* work areas
DATA: gs_ranges TYPE ty_range.
DATA: gs_frange TYPE ty_frange.
DATA: gs_selopt TYPE rsdsselopt.
DATA: gt_ranges TYPE ty_range_t.
DATA: gt_frange TYPE ty_frange_t.
DATA: gt_selopt TYPE ty_selopt_t.
* Definition of the fields list avaiable
TYPES: ty_fields TYPE STANDARD TABLE OF rsdsfields.
DATA: it_fields TYPE ty_fields.
DATA: gs_fields TYPE rsdsfields.
* END Dynamic Range Selection --------------------------------------------
CALL FUNCTION 'FREE_SELECTIONS_INIT'
    EXPORTING
      kind         = 'T'
    IMPORTING
      selection_id = gv_selid
    TABLES
      tables_tab   = gt_tables.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'FREE_SELECTIONS_DIALOG'
    EXPORTING
      selection_id    = gv_selid
      title           = 'Select WHERE criteria for Rule'(s12)
      as_window       = 'X'
      start_row       = 7
      start_col       = 10
    IMPORTING
      field_ranges    = it_ranges
    TABLES
      fields_tab      = it_fields
    EXCEPTIONS
      internal_error = 1
      no_action       = 2
      selid_not_found = 3
      illegal_status = 4
      OTHERS          = 5.
Edited by: Rocco Scocco on Jun 17, 2010 3:48 PM
Edited by: Rocco Scocco on Jun 17, 2010 3:49 PM

Select options range table to be passed to Assistance class

Hi Guru's,
I have an assistance class where I have to write all my select queries. I have a selection screen with multiple Select options (as input fields). Now I want to pass the select options range table to assistance class.
Please let me know if you have any sample code for this which may also include building range tables for select options.
Thanks,
Pradeep

Hi Pardeep,
U can use following code: for field ERDAT
data: rt_ERDAT      type ref to data,
        R_ERDAT       TYPE RANGE OF VIQMEL-ERDAT,
        R_ERDAT_line LIKE LINE OF R_ERDAT,
field-symbols: <fs_ERDAT> type table.
Retrieve the data from the select option
rt_ERDAT = wd_this->m_handler->get_range_table_of_sel_field( i_id = 'ERDAT' ).
Assign it to a field symbol
assign rt_ERDAT->* to <fs_ERDAT>.
copy field symbols to local variable
R_ERDAT = <fs_ERDAT>.
CALL METHOD WD_ASSIST->"METHOD_NAME"
      R_ERDAT        = R_ERDAT
where in class method:
R_ERDAT     Importing     Type     ZU5QNM_ERDAT_T
ZU5QNM_ERDAT_T : is a table type of ZU5QNM_ERDAT_R
and ZU5QNM_ERDAT_R has following structure :
SIGN     ACE_SIGN     CHAR     1     0     Debit/Credit Sign (+/-)
OPTION     ACE_OPTION     CHAR     2     0     Option for Ranges Tables
LOW     ERDAT     DATS     8     0     Date on Which Record Was Created
HIGH     ERDAT     DATS     8     0     Date on Which Record Was Created
I hope this wiol solve ur problem.
Regards,
Vishal.

Error when selecting date range in query designer

hi all,
when iam trying to select date range in query designer like 01.04.2009 to 10.04.2009 it has to select only that dates where as it is selecting all the dates in between those like 010.04.2009,01.03.2009,01.02.2009.why this is happening ,iam unable to understand.plzz help me in this issue.
Vamshi D Krishna

hi ,
i have created a variable as you told but no use.still i have to select the dates manuallyone after the other.for more user friendly can i have a calander where i can select date ranges.is it posible to have calander for selecting date ranges instead selecting dates one by one,if posible i request you to give the detailed steps.plzz guide me in this issue.thanks in advance.
Vamshi D Krishna

Select page range

Hi,
How to select page range and run our functions with the particular pages?
Selva

Hello Hopkins,
I just wanted to tell you, your code is gorgeous! And your very talented!
Everything you create is just an absolute joy to look at. Especially the page range function.
Thanks for your understanding for what me want.
Selva
Here my changes (for your review):
try {
    //assumes document is open
    var docRef = app.documents.item(0);
    var maxPages = docRef.pages.count();
//provide variable to hold user's response
var userResponse = dialogWChoices ("Dialog Name", true, "Label here", maxPages);
    //enter call to function that processes all pages
    if (userResponse[0] == 0) {
        myProcess (docRef, 0, maxPages);
     } else {
         var minPageRef = userResponse[1] - 1;
         var maxPageRef = userResponse[2] - 1;
         myProcess (docRef, minPageRef, maxPageRef);
} catch (e) {
alert ("Process Done!\rWith the selected pages.");
//function to process range of pages
function myProcess (docRef, minPageRef, maxPageRef) {
    var thisPage, thisFrame, docOffset;
    //our code start from here
    var myStep = 1;
   for (var i = minPageRef; i <= maxPageRef; i++) {
       thisPage = docRef.pages.item(i);
       var myTables = thisPage.textFrames[0].tables.everyItem().getElements();
       for (j =0; j<myTables.length; j++){
           if(myTables[j].spaceAfter + myStep<0){myTables[j].spaceAfter = 0; continue};
           myTables[j].spaceAfter = myTables[j].spaceAfter + myStep;
          } //end our code
//function gets page range or "all" from user
function dialogWChoices (dlgName, cancelIt, dLabel, maxPages) {
    var userCancelled = false;
    var origValue = app.scriptPreferences.userInteractionLevel;
//make sure that user interaction levels will allow a dialog
app.scriptPreferences.userInteractionLevel = UserInteractionLevels.INTERACT_WITH_ALL;
//create the dialog
var dlgRef = app.dialogs.add({name:dlgName, canCel:cancelIt, label:dLabel});
//add a column
var dlgColumn1 = dlgRef.dialogColumns.add();
    var dlgColumn2 = dlgRef.dialogColumns.add();
    var dlgColumn3 = dlgRef.dialogColumns.add();
//add widgets for first column
dlgColumn1.staticTexts.add({staticLabel: "PageRange:"});
//add widgets to second column
var radioGroup = dlgColumn2.radiobuttonGroups.add();
    radioGroup.radiobuttonControls.add({staticLabel:"All", checkedState:true});
    radioGroup.radiobuttonControls.add({staticLabel:"Range", checkedState:true});
    //add widgets to third column; put reference into a variable
    var emptyRow = dlgColumn3.dialogRows.add();
    emptyRow.staticTexts.add ({staticLabel: ""});
    var inputRow = dlgColumn3.dialogRows.add();
    var firstField = inputRow.integerEditboxes.add({minWidth:36, minimumValue:1,maximumValue:maxPages});
    inputRow.staticTexts.add ({staticLabel: " thru "});
    var secondField = inputRow.integerEditboxes.add({minWidth:36, minimumValue:1, maximumValue:maxPages});
//show the dialog and capture the result
if (dlgRef.show() == true) {
        var firstVal = 0;
        var secondVal = 0;
        var selButton = radioGroup.selectedButton;
        if (selButton == 1) {
var firstVal = firstField.editValue;
var secondVal = secondField.editValue;
} else {
        userCancelled = true;
       dlgRef.destroy();
       app.scriptPreferences.userInteractionLevel = origValue;
    if (userCancelled) {
       throw ("User Cancelled");
//destroy the dialog; script doesn't get here if user cancels
return [selButton, firstVal, secondVal];

Select- Color Range- Results in Blue Screen (PC) (driver out of date)

I've been using the CS6 beta about two days. While experimenting with color range I experienced two consecutive blue screen crashes. The first time it happened,I was working with the color range selector and was replacing the selected areas with another color using the paint bucket. About the third time I attempted this, my PC blue screened. The second time, I opened a photo, went to Select>Color Range and got an immediate blue screen crash.
I then went back to CS5 and I've been playing with the same scenario with no apparent problems.
My PC is a store built computer. It consists of an MSI 990-FXA GD80 motherboard, an AMD Phenom 1100t CPU, Asus GTX550 Ti graphics card and 8 gig of RAM. It boots from a 60 gig SSD and my programs reside on a 500 gig hard drive. The OS is Windows 7 Professional 64 bit. CS6 is using the hard drive for its scratch disk and Photoshop is using 4339 mb of the 7232 mb of available RAM - I haven't changed that. I'm running CS6 as administrator because the way it installed, it would only run in that fashion.
One disappointment during the installation was CS6 made no attempt to read my preferences from the CS5 install. That may be covered in another post, I've not yet looked.
Please keep us informed as new betas are released, because I would like some time to work with this puppy before plunking down big bux for the upgrade. As it is now, I'm going back to CS5. I get mighty nervous when my super computer blue screens!
Gerry
gswetsky AT bellsouth DOT net

The GPU is often at root of issues like yours. I've had so many problems with Nvidia drivers for their gaming-oriented adapters (like yours) that I finally went with one of their workstation cards. I have a Quadro card with just enough RAM to make Photoshop happy. The workstation drivers are optimized for reliability, the consumer card drivers are optimized for gaming and that often means they're less stable and reliable with Photoshop.

Devolped an ALV report for daily cash receipts for selected date range

hi,
             how to devlop an ALV report for daily cash receipts for selected date range.for this report what are the tables and fields we have to use.what is the selectionscreen&what is logic.give me sample report.

hi,
             how to devlop an ALV report for daily cash receipts for selected date range.for this report what are the tables and fields we have to use.what is the selectionscreen&what is logic.give me sample report.

Devloped an ALV report for daily cash receipts for selected date range

hi,
             how to devlop an ALV report for daily cash receipts for selected date range.for this report what are the tables and fields we have to use.what is the selectionscreen&what is logic.give me sample report.

Hi,
You can develop simple reports using Report Painter.
You may be also interested in:
Check report SAPMF05A for credit memo
See the following Std reports on Payment Advices execute the Tcodes:
S_ALR_87009888
S_ALR_87009889
S_ALR_87009890
S_ALR_87009891
S_ALR_87009892
S_ALR_87009893
S_ALR_87009978
S_ALR_87009979
S_ALR_87009980
S_ALR_87009981
S_ALR_87009982
S_ALR_87009983
S_ALR_87010056
S_ALR_87010057
S_ALR_87010058
S_ALR_87010059
S_ALR_87010060
S_ALR_87010061
S_ALR_87010066
S_ALR_87010067
S_ALR_87012106
S_ALR_87012107
S_ALR_87012108
S_ALR_87012109
S_ALR_87012110
S_ALR_87012111
S_ALR_87012116
S_ALR_87012117
S_ALR_87012200
S_ALR_87012201
S_ALR_87012202
S_ALR_870122
S_ALR_87012204
S_ALR_87012205
S_ALR_87012350
S_ALR_87012351
S_ALR_87012352
S_ALR_87012353
S_ALR_87012354
S_ALR_87012355
sample ALV report:
tables:
marav. "Table MARA and table MAKT
Data to be displayed in ALV
Using the following syntax, REUSE_ALV_FIELDCATALOG_MERGE can auto-
matically determine the fieldstructure from this source program
Data:
begin of imat occurs 100,
matnr like marav-matnr, "Material number
maktx like marav-maktx, "Material short text
matkl like marav-matkl, "Material group (so you can test to make
                        " intermediate sums)
ntgew like marav-ntgew, "Net weight, numeric field (so you can test to
                        "make sums)
gewei like marav-gewei, "weight unit (just to be complete)
end of imat.
Other data needed
field to store report name
data i_repid like sy-repid.
field to check table length
data i_lines like sy-tabix.
Data for ALV display
TYPE-POOLS: SLIS.
data int_fcat type SLIS_T_FIELDCAT_ALV.
select-options:
s_matnr for marav-matnr matchcode object MAT1.
start-of-selection.
read data into table imat
select * from marav
into corresponding fields of table imat
where
matnr in s_matnr.
end-of-selection.
Now, we start with ALV
To use ALV, we need a DDIC-structure or a thing called Fieldcatalogue.
The fieldcatalouge can be generated by FUNCTION
'REUSE_ALV_FIELDCATALOG_MERGE' from an internal table from any
report source, including this report.
The only problem one might have is that the report and table names
need to be in capital letters. (I had it )
Store report name
i_repid = sy-repid.
Create Fieldcatalogue from internal table
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
       EXPORTING
            I_PROGRAM_NAME         = sy-repid
            I_INTERNAL_TABNAME     = 'IMAT' "capital letters!
            I_INCLNAME             = sy-repid
       CHANGING
            CT_FIELDCAT            = int_fcat
       EXCEPTIONS
            INCONSISTENT_INTERFACE = 1
            PROGRAM_ERROR          = 2
            OTHERS                 = 3.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            I_CALLBACK_PROGRAM       = i_repid
            I_STRUCTURE_NAME         = 'marav'
            I_DEFAULT                = 'X'
            I_SAVE                   = 'A'
       TABLES
            T_OUTTAB                 = imat.
IF SY-SUBRC <> 0.
    WRITE: 'SY-SUBRC: ', SY-SUBRC .
ENDIF.
Hope this will help.
Regards,
Naveen.

How do I select a range of values in MySQL using a drop down menu

Hi,
I have a database of picture frames that have a value of
frame width. I want to be able to select a range of values (i.e.
.50" to 1") instead of each and every value (i.e. .50", .56", .76",
etc.). I have a drop down menu (mnuWidth) with 5 ranges (see
attached code).
Each selection has a value from 1 to 5 indicating the range I
want to search. In my results page I have let DW set up a recordset
(see attached code)
Can anyone tell me how to get this to choose a range instead
of just the value entered by my menu?
Thanks in advance.
Tom

I have been growing fond of lookup tables. Your lookup table would have your numbers in one column and the values you want returned in the next.
Lookup table
item
Name
1
a
2
b
3
c
4
d
5
e
6
f
7
g
8
h
9
i
Input table
input
Name
1
a
B2 and copied down:
LOOKUP(A2,lookup::$A$2:$A$11,lookup::$B$2:$B$11)
Caution: Lookup will return the closest value so it it looks for "10" in this example it will return "i"
If you don't want to see the error messages from blank inputs, wrap Lookup in IFERROR.
hope this helps
q

How do I select a range of rows from an internal table in the debugger?

Hi,
I have a case where I wanted to delete a range of rows (several thousand) from an internal table using the debugger.
It seems that rows can only be selected one at a time by selecting (clicking) on the far left side of the row.
This is cumbersome, if not impossible when wishing to delete several thousand rows.
Other tools, such as Excel for example, allow for selecting a range of rows by selecting the first row and then holding the SHIFT key and selecting the last row and all rows in between will be selected.
I can't seem to find the combination of keys that will allow this in the table (or structure) tab of the debugger.
Is it possible to select a range of rows without having to select each row one at a time?
Thanks for your help,
Andy

While it's a Table Control and should/could have a button to select all fields (or visible fields)...I don't think we can do it right now...I know it's a pain to select each row one at a time...but I don't we have any more options...
Greetings,
Blag.

File Count with selected date range

Hi,
Our requirement is to get the file count with selected date by the user from two sharepoint date time controls i.e. dtp1 and dtp2 into the data table. I am able to get the file count of specific folder from Pages library through below code. Now need to get
the selected date range from two date time picker controls and check with the item created by is within the date range. If yes I need to get the file count.
So please share your ideas/thoughts to do the same.
SPList list =
wikiweb.Lists["Pages"];
                    SPFolderCollection oFolders
= list.RootFolder.SubFolders["foldername"].SubFolders;
                    DataTable dt
= new DataTable();
                    dt.Columns.Add("Column1");
                    DataRow dr;
                    if (oFolders.Count
> 0)
                        foreach (SPFolder oFolder in oFolders)
if (!oFolder.Name.Equals("Forms"))
                                dr
= dt.NewRow();
dr["Column1"] = oFolder.ItemCount.ToString();
dt.Rows.Add(dr);
Regards,
Sudheer
Thanks & Regards, Sudheer

Hi,
I have modified the code as below
if((DateTime)(oFolder.Item.File.TimeCreated>dtFromDate.SelectedDate)&&(DateTime)(oFolder.Item.File.TimeCreated<dtToDate.SelectedDate))
But still it is throwing the error.
Please share your ideas on the same.
Regards,
Sudheer
Thanks & Regards, Sudheer

Select a range of rows to be displayed using ROWNUM

I am trying to select a range of records to be displayed using Rownum
It works using MINUS
SQL> select rownum,department_id,department_name from departments where rownum <= 20
minus
select rownum,department_id,department_name from departments where rownum < 11;
but does not work if a range is specified
select rownum,department_id,department_name from departments where rownum >= 11 and rownum <= 20;
What has gone wrong?
Details of what I have tried are as follows:
Connect to the sample schema HR
SQL> connect hr/hr
SQL> desc departments
Name Null? Type
DEPARTMENT_ID NOT NULL NUMBER(4)
DEPARTMENT_NAME NOT NULL VARCHAR2(30)
MANAGER_ID NUMBER(6)
LOCATION_ID NUMBER(4)
List all records in Departments
SQL> select rownum,department_id,department_name from departments;
ROWNUM DEPARTMENT_ID DEPARTMENT_NAME
1 10 Administration
2 20 Marketing
3 30 Purchasing
4 40 Human Resources
etc......
26 260 Recruiting
27 270 Payroll
27 rows selected.
List the first 10 records in DEPARTMENTS
SQL> select rownum,department_id,department_name from departments where rownum <= 10;
ROWNUM DEPARTMENT_ID DEPARTMENT_NAME
1 10 Administration
2 20 Marketing
etc.....
10 100 Finance
List row number from 11 to 20, but cannot no rows selected. Why?
SQL> select rownum,department_id,department_name from departments where rownum >= 11 and rownum <= 20;
no rows selected
Use of MINUS can retrieve row number from 11 to 20
SQL> select rownum,department_id,department_name from departments where rownum <= 20
minus
select rownum,department_id,department_name from departments where rownum < 11;
ROWNUM DEPARTMENT_ID DEPARTMENT_NAME
11 110 Accounting
12 120 Treasury
13 130 Corporate Tax
14 140 Control And Credit
15 150 Shareholder Services
16 160 Benefits
17 170 Manufacturing
18 180 Construction
19 190 Contracting
20 200 Operations
10 rows selected.

For each row returned by a query, the ROWNUM pseudocolumn returns a number indicating the order in which Oracle selects the row from a table or set of joined rows. The first row selected has a ROWNUM of 1, the second has 2, and so on.
Conditions testing for ROWNUM values greater than a positive integer are always false. For example, this query returns no rows:
SELECT * FROM employees
WHERE ROWNUM > 1;
You can get the selected records based on the rownum using the inline query....
SQL> select rownum, empno from emp;
ROWNUM EMPNO
1 7369
2 7499
3 7521
4 7566
5 7654
6 7698
7 7782
8 7788
9 7839
10 7844
11 7876
ROWNUM EMPNO
12 7900
13 7902
14 7934
14 rows selected.
SQL> select * from (select rownum rn, empno from emp) where rn > 2 and rn < 5;
RN EMPNO
3 7521
4 7566

How select a range or portion of a clip when importing?

Upgraded from FC Studio 5.1 to FCP10.1 when importing media (mp4 or AVCHD) from the hard drive how do I select a range or portion of a clip in the media import window if I do not want to import the entire clip into FCP. At this point I can select the entire clip indicated by the yellow outline around it however there does not appear to be any way to click drag to resize the yellow outline to select just a portion of the clip.
Thanks for any help.

So if I have a 500mb .mp4 clip I have to import the entire clip? No possible way to select a range? However FC alows native folder AVCHD clip portions to be imported, very interesting.
If I connect my Canon xa20 via USB to my iMac would FC then alow me to select clip portions (AVCHD or .mp4) to import?

1) Select a range of files in Finder; and 2) Cut files!

Two questions:
1) Why is it not possible to select a range of files in Thumbnail view in the Finder while pressing Shift...works fine in the List view? Makes no sense at all!
2) Why is it not possible to cut files in the finder using "CMD X" or "Cut" ... I can only copy or drag an drop? That ***** bigtime!

1) Not really, what I want to do is select the first file then press shift and then select the last file of the range. Usually this should select all the files between the first and the last in the range (and that actually happens in the list view) ...but NOT in the stupid Thumbnail view (which I need to organize my pictures).

Selection of range in variable

Similar Messages

Maybe you are looking for