Selection printing not printing correctly.

Every time I try do Selection printing, it doesn't print the content correctly. It will print all the pages for the web page blank and print the highlighted content where it belong in the pages. Before it would print just the selected content and nothing else.
http://imageshack.us/a/img822/906/ffselectionprinting.png

Hello,
Thanks for the post. Windows 7 premium, can you select area using Explorer? How about Chrome or another browser? I've attached a link here to the APPLE support, I might also suggest posting this question there. Good Luck!
http://www.apple.com/support/safari/
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Similar Messages

Dynamic Select List not displaying correct value

Hi there!
I have a page with a dynamic repeat region.
As I press one record I get up all the details based on id on an edit page.
The problem is that the info that is inserted via a Select List is not displaying correct on edit page.
All the other values are correct, also the values in the repeat region on index page,
but the value from the Select List on edit page is just displaying the initially selected item.
Have tried using SELECT DISTINCT in the SQL statement, but no luck.
Any other ideas?
Cut and paste from form:
<select name="Vegtype" class="ProvDet" id="Vegtype" title="<%=(rsAs.Fields.Item("VegType").Value)%>">
                    <option value="Ev" selected="selected">Ev</option>
                    <option value="Fv">Fv</option>
                    <option value="Rv">Rv</option>
                    <option value="Kv">Kv</option>
                  </select>
Recordset
<%
Dim rsAs
Dim rsAs_cmd
Dim rsAs_numRows
Set rsAs_cmd = Server.CreateObject ("ADODB.Command")
rsAs_cmd.ActiveConnection = MM_LabCon_STRING
rsAs_cmd.CommandText = "SELECT DISTINCT DatoM, DatoR, DatoU, Distr, FagFelt, Felt, IntNr, Km, KontrNr, Kontrollor, Masse, MasseBK, Punkt, Resept, TestID, UserID, VegHp, VegNavn, VegNr, VegType FROM tblTest WHERE TestID = ?"
rsAs_cmd.Prepared = true
rsAs_cmd.Parameters.Append rsAs_cmd.CreateParameter("param1", 5, 1, -1, rsAs__MMColParam) ' adDouble
Set rsAs = rsAs_cmd.Execute
rsAs_numRows = 0
%>
Regards,
Christian
DWCS5 | .Asp | MS Access

Ok, here goes the top down approach...
In the HTML header of my page, i have this reference to a js file containing the javascript - <script src="#WORKSPACE_IMAGES#108.js" type="text/javascript"></script>
Then in an HTML Region I have the following code to create the divs that will be shown and hidden - <div id="divREGION" class="divs">Select region to get list of countries.</div>
<div id="divCOUNTRY" class="divs">Select country to get list of cities.</div>
<div id="divCITY" class="divs">Select city and then press "Get Employees". </div>
Note that these divs contain static content. You may be able to create dynamic content for these divs by creating dynamic query regions and putting div tags around the region (i havent tried this, it may require template modification).
The select boxes have this code in the "HTML form elements attributes" - onFocus="javascript:showHideDiv(this,true)" onBlur="javascript:showHideDiv(this,false)"
This onFocus and onBlur call the showHideDiv() function, passing in the object reference of the select box and a true/false to show/hide the related div.
The actual javascript function that is contained in the 108.js file is:
function showHideDiv(objThis, inBool){
     var divid = "div" + objThis.id.substring(3);
     if (inBool) {
     ShowDiv(divid);
     else {
HideDiv(divid);
That function in turn calls either the ShowDiv() or HideDiv() functions, depending on the true or false, passing in the ID of the div to be changed...
function ShowDiv(divid){
     eval('document.all'+ '["' + divid + '"]' + '.style' +'.display = "inline"');
function HideDiv(divid){
     eval('document.all'+ '["' + divid + '"]' + '.style' +'.display = "none"');
Hope this helps.

Middle select button not working correctly?

I have a nano second generation and the select button in the middle is not working correctly. I have to keep pushing it and pushing it to get it to work and now it's not working at all. Any ideas?

Try Restoring it. If that doesn't work you need to have it serviced. You can either take it by an Apple Store and make a Genius Bar appointment or send it here:
http://depot.info.apple.com/ipod/

F110 DME File selected is not the correct file

Hi Gurus,
Could you advise on this issue please?
We have executed a payment run F110 for vendors on SAP. The payments documents are created successfully. When we view the payment list via F110 -> EDIT -> Payment List -> generate via RFZALIZ0 program the payments are all correct.
But there is a problem with the DME file. Under F110 -> Environment -> Payment Medium -> DME Administration the total displayed for teh DME file is all fine. However, when we view the DME file created by the run using the Display (gllasses) icon on this screen the data is not correct. The system is selecting data from the last payment run executed in this company code. When we do a download of the file, it is the previous run's data that is contained in the file and not the current run.
The DME variants all seem to be maintained correctly. We have executed payment runs for other company codes and these are all picking up correctly. The DME files are all being stored in the same DME filepath /usr/sap/PMG/dme/ plus company code ID.
When we use FDTA to select out the DME file, again we get the same view as we see in F110 -> Environment -> Payment Mdeium. The totals on the F110 run look good. But the data in the DME file is incorrect.
Can you advise why is the system picking up the wrong DME file for the paymnet run in this company code. All other company codes are fine. We have tested the problem Company Code in our Quality system (where the DME filepath is also /usr/sap/PMG/dme/ plus company code identifier and it works OK there.
How do we get the system to link to the correct DME file data?
Thanks for your quick response.
Michael Ryan

Hi Akhilesh,
We don't use the IDOCs here but just a DME file. The issue here was the DME filesystem is only mounted on one of the application servers. The end user was logged onto the wrong application server and so the paymnet run could not find the file. It was theerfore picking up the last file that it could see from the server that the user was logged onto.
When the user logged onto the correct serevr, the payment run then pciked up the file.
Thanks & regards
Michael

GPO - Restricts the UI languages Windows should use for the selected user - not applying correctly on RDS 2012 R2

Hi All,
we have a Citrix XenApp 7.5 Farm with Windows Server 2012 R2 Servers and multiple (english, german, italian, spanish, french...) languages installed.
I've created a GPO with settings 'Restricts the UI languages Windows should use for the selected user' to for example 'German'.
Now when a user logs on to the server, the UI language is in german, but when i open Control Panel\Language: There is still English (United States) with Keyboard Layout: US, German.
It seems that the GPO is not changing all settings correctly to german.
Does anybody know what could be wrong?
best regards,
Siegmund

Hi Siegmund,
>>Now when a user logs on to the server, the UI language is in german, but when i open Control Panel\Language: There is still English (United States) with Keyboard Layout: US, German
Based on the description, the policy setting should have been applied successfully. Here, did we logged onto the server via remote desktop services? If yes, what's the keyboard layout on the computer we used to RDP to the server? Before going further,
I assume that this can be caused by Auto detect Remote Keyboard layout feature introduced since Windows Server 2008.
Regarding this point, the following artcile can be referred to for more information.
Windows 2008 R2 Language Bar keeps changing Keyboard Settings
http://www.microsoftpro.nl/2011/02/24/windows-2008-r2-language-bar-keeps-changing-keyboard-settings/
Note: For the above website is not hosted by Microsoft, the link may become invalid without notice and Microsoft doesn't guarantee the accuracy of the information.
In addition, the following thread can also be referred to for more information.
2008 R2 Session Host with MUI controlled via Group Policy
http://social.technet.microsoft.com/Forums/windowsserver/en-US/4e14955a-80f9-40aa-9741-fc8609f4ad09/2008-r2-session-host-with-mui-controlled-via-group-policy?forum=winserverGP
Best regards,
Frank Shen

Quick selection tool not working correctly

I am trying to extract a portion of a photo...i tried using the selection tool to extract the portion on another picture, and it worked GREAT!
Now i'm trying to use it in another photo and the refine image tool isn't extracting it into a new layer like it did with the other one!
is there something that i may have clicked or turned off that is preventing me from making this extraction??

Hello,
Could you be more specifc as to what you are doing here?
You mention using selections tools, including the Quick Selection tool, but these tools only create selections, they do not extract the material you have selected. A selection is like highlighting text in a word processor, after you have highlighted the text you can copy/paste it or modify it, but simply highlighting it doesn't do anything. Same with selections, once you have created a selection with a tool like Quick Selection you can how copy/paste it to a new image or perform adjustments to just that area.
I'm not sure what you mean by the "refine image tool", we don't have anything by that name. However, we do have a Refine Edge option that helps to make cleaner edges to your selection.
-Brett

Illustrator CS - Selection Tool not working correctly

Hi all...
A customer of ours has an odd Illustrator CS problem. When she tries to use the Selection Tool to select any item, it auto-selects everything. Even if she uses the selection box by dragging the cursor over anything, it selects all the different items in the image.
Has anyone seen this or fixed it before?
Many thanks!

How about this?...
With the selection tool/black arrow tool, you can select the object, change the color or opacity and move it...but can't un-group it.
With the direct select tool/white arrow tool, when you try to select an individual shape to make slight changes to the path...the anchor points will show up as you mouse over them, but nothing shows when you click on the path.
When drawing a new shape with the pen tool, the anchor points don't show as you draw the shape. No handles appear...but the shape shows up. It's like feeling your way around a dark room on instinct.
...and it's only doing this in one particular file. When another file is opened all the quirks listed above do not happen. Each tool works as it should.

Select statement not returning correct data

I'm working on an application and I'm having a weird problem. The application connects to an Oracle database, pulls out some data, and does something with it. In the process of testing I've already read and dealt with some rows. On those rows the UPDATE_FLAG field was changed to a N so they wouldn't be selected again.
I do want to select those rows again, so with SQLPlus I changed the UPDATE_FLAG back to Y. Now here's the strange part. The same select statement run from SQLPlus is returning thoe row I modified, but my application does not.
Here's the select statement:
SELECT * FROM MY_TABLE WHERE UPDATE_FLAG = 'Y' and USER_ID like 'B%';
When I run this I get a row back called Brian.
In my application I do this:
try
               Class.forName("oracle.jdbc.driver.OracleDriver");
               Connection conn = DriverManager.getConnection("jdbc:oracle:thin:@server:port:sid", "username", "password");
               Statement st = conn.createStatement();
               ResultSet rec = st.executeQuery("SELECT * FROM MY_TABLE WHERE UPDATE_FLAG = 'Y' and USER_ID like 'B%'");
               System.out.println("SELECT * FROM MY_TABLE WHERE UPDATE_FLAG = 'Y' and USER_ID like 'B%'");
               while(rec.next())
                    System.out.println(rec.getString("USER_ID"));
               st.close();
          } catch (Exception e)
               System.out.println("Error -- " + e.toString());
               e.printStackTrace();
            }When this runs it doesn't return Brian and there are no exceptions caught. It's like it does not find it.
Assuming I explained this well enough, anyone have any ideas what the problem could be?
Thanks,
James

I do want to select those rows again, so with SQLPlus I changed the UPDATE_FLAG back to Y. Last time I ran SQLPlus I explicitly had to do a commit after modifications, because it was creating a transaction around the sqlplus session. Of course running a query in that session would work on the modified data rather than the actual data.

Added photos to selection are not appearing correctly

I am making a photo slideshow on imovie.. Numerous times, I add a photo after a previous one, it is formatted with no Ken Burns, and to fit the screen, and time and again, the image appears incorreectly as either the previous image, or one that was previously deleted. And I am REALLY not impressed with this from Apple.. I have never had these issues with their products..
What am I doing wrong, because the simple drag and drop aint workin that's for sure.

To clarify, what no longer shows on the iPhone is the "Saved Photos" which are those that have not been synced and now only show in the iPhoto sync when phone is plugged into the Mac.
All there is now other than albums is "Recenty Added" which shows only the most recent addition, then those disappear when new photos are taken.
What will happen to those pictures that now only show scattered though the pictures option (vs albums) when a new iPhoto library will be used next year?

CR XI landscape report not printing correctly on one particular server

Post Author: BronxJedi
CA Forum: General
I have a report that was designed in Crystal XI (11.5.0.313) that is not previewing or printing correctly when the users access it on our production server. The report is designed as a landscape report, for an 8.5x11 size paper; however, when this report is previewed on the production server all of the data is pushed over to the left, as though the computer is trying to cram it all into a portrait-sized layout. Furthermore, when viewing the Document Properties of the report in preview it says that the page size is 11x17!
This report, I should mention, is part of a web application designed in Visual Studio. When users select a report to run the application actually displays the report as a PDF document in an Adobe Reader window. So, when I mention "preview" in this post it is not the Crystal Reports print preview window but rather an Adobe Reader window previewing the report as a PDF document.
None of the other landscape reports in this application are demonstrating this same problem. Also, the report in question previews and prints perfectly fine when it is run on other computers or servers.
Currently, we have eliminated design flaws in the report as a suspect because all of the pertinent properties in the report's design are set properly. We have also eliminated the users' printer settings as the culprit because the problem exists no matter who attempts to print that particular report and no matter what printer is chosen.
Right now we are operating under the assumption that the problem lies within the server (which is a new box that just replaced one which died...the hardware on this new box is different, I am told by our server guy, but everything else was mirrored from the old box); however, we are unsure of what to examine in our attempts to fix it.
The production server is running Win 2003 Server, R2, SP2 and there are no apparent printer drivers installed on the production server. We are using Adobe Reader 8.0 on all machines that can access this report.
If anybody out there has had this same problem or knows of anything else we can check (either on the production server or within the report's design) we'd appreciate it. Why would only this particular report be exhibiting this problem and why on Earth would the Adobe Document Properties think that the page size is 11x17?
Thank you,
Sean

Once you find an erroneous report, can the report be re-run over the same data (same parameters, same underlying data records after record selection) and the error duplicated?
Can you dump the data read by Crystal in the Detail section of the report? (Verify the data is as expected...)
Can you post the stored procedure? (Please wrap it in markup to keep it readable. A sample of both crosstabs wrapped in the markup would be helpful, too.)
Carl

You do not have sufficient access to your computer to connect to the selected printer

Environment
Print server: Windows 2008 R2 SP1
Clients: Windows XP SP3 + GPP
Drivers:
HP UPD PCL6 5.3.1.10527
Intermec 7.2.2
Ricoh UPD PS 3.9.0.0
Xerox UPD PS 5.216.12
Zebra 2.6.42.03
GPO Configuration - enables users to add printers/drivers from the print servers.
Background
For the last year, we've had the 2008R2 print server set up and the clients have not had any problems connecting to the print server to add printers.
Issue
Over the past ~3 weeks, we've gotten spurious reports from users stating they're unable to add a printer. The specific error displayed is:
You do not have sufficient access to your computer to connect to the selected printer.
It occurs for multiple vendors, so it's not a print driver specific issue. I've personally witnessed the problem where (using a User's account) I was unable to add Printer X out of a list of 10 random printers. 2 minutes later, still logged on
as the same user, I was then able to add Printer X which doesn't make any sense since nothing had changed.
Another user logging into the same workstation will not have any problems adding the same problematic printer. The user who had the problem can log onto a different workstation and add the same printer with no problems, so it's not a User permission
issue either.
Most of the time running gpupdate /force and/or rebooting the box will also 'solve' the problem.
Running the group policy results wizard on a few random workstations (which have exhibited this problem in the past), shows everything appears to be properly configured/enabled related to GPOs, including the
Prevent users from installing printer drivers setting per http://support.microsoft.com/kb/259937
Has anyone else ran into this problem lately?
How does one troubleshoot this issue since I can't faithfully reproduce it on demand since it appears to resolve itself after a period of time?

Haven't found the smoking gun to this problem, but I am getting closer.
Troubleshooted another PC today which was exhibiting this problem for another user. Logged onto the PC with my User account and sure enough, received the same message for the same printer. Fired up Sysinternals Process Monitor, but nothing useful
was captured when receiving the failure message. There was also another Point and Print printer which was present on the workstation (i.e.
PrinterName on PrintServerName) for my User account which stated "printer cannot be removed. Access is Denied" when I tried to delete it. Odd. Getting properties on the printer would bring up the correct info from the print server
though, so it was valid and appeared functional.
I tried running the new
MS FixIT printing tool, but it failed in full mode with an admin account.
Next, I searched through the registry for this printername which I was unable to delete. Eventually it was found at:
HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Print\Providers\LanMan Print Services\Servers\PRINTSERVERNAME\Printers\PRINTERNAME
On a hunch, I deleted the entire PrinterName key, restarted the print spooler, and then was able to add the printer with no permission errors! There were several more printers listed in this registry key. I tried the same steps again:
validate receiving 'sufficient access' error.
purge printer's registry key
restart spooler
Able to add the same printer via point and print.
This solved the problem on half of the printers. The others added with no errors. The printer drivers in question are from both HP and Xerox, so I doubt it's a vendor specific issue and instead Windows (unsure if XP or 2008 though).
It would appear that Windows caches the information about the printer/driver/settings/etc from the print server in CurrentVersion\Print\Providers\LanMan Print Services\Servers\PRINTSERVERNAME\Printers\PRINTERNAME ? Why does it need to be duplicated
in both HKLM and HKCU?
Separate PC, further exploring this printer issue and the contents of the \LanMan Print Services\Servers\PRINTSERVERNAME\Printers\ keys. On this PC, I successfully ran the MS FixIt for Printing tool in Full mode and rebooted. After reboot, the
System Event logged the following for multiple printers -- which should've been deleted --
Event Type: Error
Event Source: Print
Event Category: None
Event ID: 23
Date: 4/9/2012
Time: 5:11:48 PM
User: NT AUTHORITY\SYSTEM
Computer: U-xxxxx
Description:
Printer UH-xxxxx-COLOR failed to initialize because a suitable Xerox Global Print Driver PS driver could not be found.
Event Type: Error
Event Source: Print
Event Category: None
Event ID: 23
Date: 4/9/2012
Time: 5:11:48 PM
User: NT AUTHORITY\SYSTEM
Computer: U-xxxxx
Description:
Printer UH-xxxxxx failed to initialize because a suitable HP Universal Printing PCL 6 (v5.3) driver could not be found.
Yet a minute later, the updated driver was automatically installed via P&P:
Event Type: Warning
Event Source: Print
Event Category: None
Event ID: 20
Date: 4/9/2012
Time: 5:12:22 PM
User: NT AUTHORITY\SYSTEM
Computer: U-xxxx
Description:
Printer Driver HP Universal Printing PCL 6 (v5.4) for Windows NT x86 Version-3 was added or updated. Files: <snip>
Sure enough, after checking the \LanMan Print Services\Servers\PRINTSERVERNAME\Printers\ keys, all of those printers which logged EventID 23 were still present! This time, I manually deleted the entire \LanMan Print Services\Servers\PRINTSERVERNAME\Printers\
subkeys, rebooted the PC, logged on, and those errors did not repeat.
Something strange is definitely going on with the printing subsystem on XP lately...

Printing "Form Fields Only" not working correctly in Adobe XI

I have a pdf form with fields including check boxes. If I print this form with all fields it prints correctly, but if I select "Form Fields Only" then all check boxes print as checked regardless of whether or not they are checked. When I use this form in earlier versions of Adobe I do not get this problem. Any ideas or solutions?

Also the "PrintParams" properties require version 6 or above of Acrobat/Reader.
One has to review the Acrobat JavaScript API for all sorts of version variations in the way Acrobat's JS object works. And the documention is not always correct.

Placed objects not printing correctly

Not sure if this is a bug in the new update, but this just started happening on all of my Indesign documents, some of which are fairly old and have been used hundreds of times. All adobe programs are CS6 Master/Photoshop X Pro.
When I go to print one of these, any object that is placed on the worksheet, prints blurry, or very poor quality. Text or shapes that are part of the document and not placed print correctly.
The placed objects are mainly vector based illustrator documents, but there's a few from photoshop. I don't see any errors, the files aren't being rasterized or anything and all have the correct paths. I've tested with about 20 documents and every one does this. I am 100% certain, that these files printed fine 2 days ago, and to my knowledge there hasn't been any changes to the computer or any adobe program. These were just routine brochures we were printing. Is there some setting that I'm missing that would cause placed objects to print incorrectly?

Sounds like the links are out of date or you’ve selected optimized subsampling when printing.
FWIW, I NEVER print from InDesign. I always export a PDF and print from Acrobat.
Bob

HP Photosmart premium not printing correct colors or contrast on photo paper.

My HP Photosmart Premium does not print correct colors or contrast level on photographs using photo paper. This happens with using most any application and setting the paper type to one of the photo papers... By using MS PhotoAlbum and selecting the photo tray then forcing "regular paper", I can get a somewhat decent print (this trick only works with MS PhotoAlbum). When I setup to any of the "photo paper" types, I do not get correct colors or contrast levels (even if the print preview looks good).
I have the same issue with 8.5 x 11 inch photopaper. Unless I select "regular paper" as the paper type, I get incorrect color and contrast (even if the preview looks good). The ICC "Color Profiles" look to be OK (at least the titles are correct).
Anyone have any ideas?

Try the troubleshooting steps in this page. My bet would be the Photo cartridge (the black with the bow tie symbol) is out of ink. This is only used when photo paper is selected, for plain paper printing the regular black cartridge is used.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Colors not printing correctly. Only blue and black work.

I just got a new HP OfficeJet all in one inkjet 8620 printer. The colors aren't printing correctly. Everything comes out light blue with black lettering. I tried installing new cartridges (genuine HP) and also tried gently shaking the cartridges. But the problem persists.

Hi @Iolanthe ,
I see that you are experiencing issues with the colors not printing correctly. I would like to help you resolve this issue.
I have provided a document with some steps to try to see if that will resolve the issue.
Fixing Print Quality Problems for the HP Officejet Pro 8610, 8620, 8630, 8640, and 8660 e-All-in-One...
Please let me know the results of the Print Quality Diagnostic Page?
If the test pages are printing properly, it could be a software issue.
What operating system are you using? Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Check the driver name that is installed for the printer. Make sure it shows just the printer's name.
Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen it should show the printer's name. (Officejet 8620)
If the full printer name isn't listed correctly, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
Let me know how the printer name was listed.
From the application, make sure you are selecting the proper paper type.
Try another application to see if you have the same issue.
How is the printer connected? (USB/Ethernet/Wireless)
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Selection printing not printing correctly.

Similar Messages

Maybe you are looking for