Selection-screen as subscreen in other selection screen

Hi,
is it possible to attached one selection screen, which has been created as subscreen (selection-screen begin of sreen 2000 as subscreen) to the other one (standard one 1000), created just with selection-screen commands (begin of block, etc)?
Thank you.
J

Hi,
Try using tab strips in the selection screen..
http://help.sap.com/saphelp_nw04/helpdata/EN/00/deb23789e95378e10000009b38f8cf/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e7/deb237b9a9a968e10000009b38f8cf/content.htm
Thanks
Naren

Similar Messages

Selection screen: PNP database or other selection criteria

I received a specification of a new to be developed program where they defined a selection screen with a with 2 radio buttons:
1.     Use the logical database PHP for data selection (rb1);
2.     Use other criteria for data selection (rb2).
My question is, is this possible?
Or should I add the other criteria between the GET PERNR and the following code with?
Sample:
GET PERNR
IF rb2 = X.
    [Check other criteria]
    IF sy-subrc <> 0.
      EXIT.
    ENDIF.
ENDIF.
null

When either pnp OR other selection :
Create program 1 with 2 radiobuttons ==> pnp-selection (rb1)or other selection (rb2). When rb1 is selected go to pgm1 with pnp ; when rb2 is selected go to pgm2 with other selection criteria. Copy pgm1 to pgm2 and add extra selections en delete pnp-statements.
When pnp WITH extra selections : 1 pgm can be used as you described.

IPhone 4 - settings screen is frozen - all other app screen work, though

iPhone 4 - when we select 'SETTINGS" the screen appears to be locked/frozen - just started happening. All other screens/apps work fine.

Sorry -- you said "lock button," my problem was with the lock screen, not the button. There is a good fix on youTube for your issue.https://m.youtube.com/watch?v=x4iAEV3KW3I&autoplay=1

Based on select list, i need to retrieve values in other select list

Hi,
am new to apex using apex3.2, i need to retrieve values in select list based on the other select list vale with out refreshing page.
ie i have region select list and country select list,in country corresponding region country must be display but with out refreshing page.
can you please any body guide me.
Regards
shashidhar
Edited by: 871140 on Jul 7, 2011 10:34 PM

Hi,
you can use cascading LOV for that, i which the other LOV field will be changing depending upon the selection of other value(which is in LOV).
http://www.inside-oracle-apex.com/oracle-apex-4-0-cascading-lovsselect-lists/
Regards,
Mini
Mark Answers Promptly

Unable to get HD Wide Screen 16:9 to fill the screen on TV.

12/20/08
Problem: I am not able to get HD Wide Screen 16:9 to fill the screen on TV. Leaves dark bands on the top and bottom of picture.
What I'm working with: Mac Pro Quad-Core Intel Xeon Processors with 2GB Memory soon to be 6GB & 30 inch screen. QuickTime Pro 7.5.5, Final Cut Express 4.0.1, and iDVD, 7.0.2.
New JVC, GZ-HD3U camcorder with QuickTime conversion software, recently updated, provided by JVC with the camera to change native TOD. files created in the camcorder to native MPEG2 files in Quicktime at a size of 1920 x 1080.
Two TV's, one Wide Screen HD and the other standard screen. I have changed the TV aspect rations back and forth from 4:3 to 16:9 and the only thing that changes is the size of the black bands on the top and bottom of the screen. The black spaces are larger in 16:9, making the picture appear squeezed.
I am using RW DVD discs so I can continue to try different setups without wasting discs and so far I have tried about 12 different arrangements. Two methods work but they are export conversions to a 4:3 aspect ratio and 720X480DV/DVCPRO-NTSC. Certainly this is a work around, but doing this looses the Wide Screen HD effects provided by the original JVC movies.
When I import the clips, and I've tried a number of different imports from QuickTime to Final Cut Express, I make sure that the Sequence set up matches or comes as close as possible to the imported clips. I've tried exporting them from FCE without changes and I have exported them using QuickTime to change them to different formats using nearly everything available trying to get the clips or sequences ready to import to iDVD.
In iDVD I have set up using both aspect ratios and it appears as thought setting up in 16:9 makes the spaces above and below even larger on TV. In fact it creates these spaces above and below even on the 720X480DV/DVCPRO-NTSC clips that work just fine on the 4:3 aspect ratio settings on the same TV.
If anyone has overcome this problem, I would greatly appreciate your guidance. So far, I've spent over a 100 hours on it to no avail.
Larry

Tom, I don't know where to go in FCE to create a AVCHD AIC Sequence. I can find the
1920X1080i60 in the Sequence format without any problem. And in QT don't know where to select AIC but I select Apple Intermediate Codec, and under compressor I select HDV 1080i interlaced frame rate 29.97. Under Export Size Settings I don't know rather to select 1920 x 1080 HD or HD 1920 x 1080 16:9 and what about preserve aspect ratio using and Deinterlace Source Video?
Part two: When I create a Sequence in FCE with the 1920X1080i60 designation, and then import a QT HD 1920X1080 16:9 Intermediate Codec clip into a bin and then open the clip in that sequence I'm asked if I want to match the clip to the sequence and if I don't I have rendering. If I match them the rendering, as you said, goes away. However, I notice that when I check out the Item Properties on them after the above process, the Aspect ratio in the clip and Sequence, suddenly becomes HD 1440x1080. Is this normal?
Larry

Designing the table grid in subscreen in a selection screen..

Hi all,
Actually my requirement is there is a check box in the selection screen,If its checked then we have to display a subscreen with the details
"Emp type"      "Empname"        "Monthly"      "Yearly"
   PM                Glen                 50000         600000
   SM                Cross               40000         480000
   TM                Mary                40000         480000
   GM                Hary                 60000         720000
should be dislayed as a table grid.
I have designed the screen but its not possible to give the headers
"Emp type"      "Empname"        "Monthly"      "Yearly"
Can anyone solve this issue for me..Thanks in advance

I know to call the window but my problem is
I have defined subscreen as:
SELECTION-SCREEN BEGIN OF SCREEN 300 AS WINDOW.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-030.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : c_air AS CHECKBOX MODIF ID sss USER-COMMAND ucom.
SELECTION-SCREEN COMMENT 4(18) text-003 FOR FIELD p_air.
PARAMETERS : p_air TYPE vbak-vbeln MODIF ID sss .
**SELECTION-SCREEN COMMENT 34(10) text-004 FOR FIELD p_air1.
**It is not accepting this
PARAMETERS : p_air1 TYPE p DECIMALS 2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b3.
SELECTION-SCREEN END OF SCREEN 300.
i am able to see one comment but can i display more than one comment

Selection screen as Subscreen help required

Hello All,
I am facing a problem by calling selection screen as subscreen, Here is my problem
In my main screen i have create a sub screen as search help
so in my sub-screen i have select-options
If i click the button to include and exclude some values i don't see the dailog box for selections is not appearing.
Please provide help. I need to allow the user to enter some n values?
Regards,
Lisa

Hi,
There is a small mistake that you are doing..
In the subscreen donot create the select options... What you need to do is... in the TOP Include write lines like..
SELECTION-SCREEN BEGIN OF SCREEN 1010 AS SUBSCREEN.
SELECT-OPTIONS s_proj FOR zimple_crmt_1000-title_part.
SELECT-OPTIONS s_cr FOR crmd_orderadm_h-object_id.
SELECTION-SCREEN END OF SCREEN 1010 .
Then.. in the screen where you have subscreen to be included write
PBO
CALL SUBSCREEN subs_1010 INCLUDING sy-repid '1010'.
PAI
CALL SUBSCREEN subs_1010.
By doing this... the select option will appear on your subscreen with the extension and interval options.
All the best.

How to call subscreen and provide selection screen in subscreen

Hi experts,
please anybody suggest me how to call subscreen in module pool screen and provide selection screen in that sub screen.
please tell me how to design this subscreen in module pool screen.
adevanced
thank you
regards
vijay krishna

Hi,
If you need to have select-options in module pool then follow these steps:-
To implement select-options in module pool, first design two input/output fields (textboxes) for the low and high value of the field and name it as <field_name>-low and <field_name>-high.
Create a button next the high value textbox and keep its sutaible function code.
Now, to call the pop-up on this button click, we have to call the same pop-up as in standard      select-options. For this we have to use the function module COMPLEX_SELECTIONS_DIALOG.
For this FM we have to pass the table name, field name and the range for the field whose range needs to fill when using the popup screen.
To pass the table name and field name details into the FM, we have to declare as:
DATA : tab TYPE rstabfield.
This structure comprises of table name and field name.
Pass these details in program as:-
u2003
*-- clear table and field details
CLEAR tab.
*-- append for range depending on the button clicked
*   either for sales order or line item
CASE sy-ucomm.
    WHEN 'VBELN'.
      tab-tablename = 'VBAP'.
      tab-fieldname = 'VBELN'.
*--To call the popup screen for the field use code:-
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
    EXPORTING
      title             = text-002 u201Ctitle text
      text              = ' '
      signed            = 'X'
      search_help       = v_shelp u201Csearch help if required
      tab_and_field     = tab u201Ctable and field name details
    TABLES
      range             = r_vbeln u201Crange for the associated field
    EXCEPTIONS
      no_range_tab      = 1
      cancelled         = 2
      internal_error    = 3
      invalid_fieldname = 4
      OTHERS            = 5.
Hope this helps you.
Regards,
Tarun

Selection screen as subscreen in module pool main screen

hello
i having problem with a module pool and a selection screen subscreen , i have my main screen 100 in my module pool
i create a sub screen area , then in my top include i define a seleccion screen as subscreen 150
i define some paramets and select-options ( for the select-options feature is because i choose use the subscreen )
so far here is OK , the problem is when i fill the subscreen data and press a pushbutton define in the main screen ( 100 )
the field are getting cleared ( BTW i call the subscreen in the PBO of the main screen ( 100 ) using call SUBSCREEN SUB_AREA INCLUDING SY-REPID '150'. ) so my question is how i can do for save the data filled in the subscreen ?
thanks

i find the solution of my own question:
in the first line of the PAI event of the main screen ( where you call the subscreen ) need add 'call subscreen SUB_AREA_NAME_HERE.

Setting screen attributes for select-option in subscreen

Hello SDN Community, I have researched this extensively in forums and found much helpful information in getting the select-option working in a subscreen. Also found information that discussed using standard AT SELECTION-SCREEN statements to process the sub-screen with.
I encountered problems when that from the LOOP AT SCREEN within the AT SELECTION-SCREEN OUTPUT, I set the INPUT/OUPUT attributes to zero, the field was still open for input when it displayed. For when I do this on other fields of my screen, they are "greyed out".
Has anyone any experience setting field attributes from within loop at screen for embedded select-option subscreen? Would appreciate any insight you might have.
Thank you,
Dean Atteberry.
P.S.- I put this thru the debugger and I can see the INPUT and OUTPUT attributes getting changed. But when displays, it is like the change didn't happen.
Full description of my processing below...
I have a screen with four radio-buttons. Under the first radio-button is my embedded subscreen with one SELECT-OPTION for AUFNR. Under the other three radio-buttons are single fields declared regular way in main screen.
In my PBO of main screen I have loop at screen that enables/disables INPUT and OUPTUT attributes based on which radio-button is selected. This prevents confusion from user entering values in fields other than the one the radio-button is selected for.
For my embedded select-option subscreen, I have an AT SELECTION-SCREEN OUTPUT statement in which I have a LOOP AT SCREEN. Within that, based on radio-buttons, I either enable or disable the INPUT and OUTPUT attributes for the S_AUFNR-LOW and S_AUFNR-HIGH fields.
Edited by: Dean Atteberry on Mar 25, 2009 4:39 PM

>> I think that you are trying to change select options within main screen, whereby it should be
>> changed in PBO of that subscreen. You said you do it in AT SELECTION-SCRREN OUTPUT which
>> will be only applicable for selection screen (I guess your main screen here). Do loop at screen in
>> PBO module of this subscreen not in PBO of the selection screen and see if that helps.
Hi Marcin, thank you for your reply. My "main screen" is not my "selection screen". Please allow me to further clarify...
My "main screen" has four radio buttons with a subscreen area under the first one and single fields under the others.
My "subscreen" is auto-generated by Selection-Screen and Select-Options statements which are in my TOP module.
I call my auto-generated select-option subscreen in my PBO with...
call subscreen sca_ordr including sy-repid scr_0121.
and in my PAI with...
call subscreen sca_ordr.
In order to do LOOP AT SCREEN for my system-generated select-option subscreen, I use the AT SELECTION-SCREEN OUTPUT event in which to put my loop.
When I walk thru this in the debugger, I can see it setting INPUT/OUTPUT fields to zero, but when the screen displays, there are no changes to my subscreen.... Fields should be "greyed out" instead they are open for intput.
Doing my best to accurately describe in as few words as possible. Thank you for your ideas!
Dean.

Selection screens as subscreens

Hi
Can we use selection screens as subscreens ?
Thanks

Hi
Please refer to this link..
http://help.sap.com/saphelp_47x200/helpdata/en/9f/dba78735c111d1829f0000e829fbfe/frameset.htm.
The link says :
It is now possible to define selection screens as subscreens in an ABAP program:
SELECTION-SCREEN BEGIN OF SCREEN <scrn> AS SUBSCREEN
[NO INTERVALS]
[NESTING LEVEL <n>].
SELECTION-SCREEN END OF SCREEN <scrn>.
But You cannot call them using CALL SELECTION-SCREEN.
<REMOVED BY MODERATOR>
Thanks
Edited by: Alvaro Tejada Galindo on Feb 25, 2008 1:44 PM

How to disable save button on selection screen (1000) run from other report

Hi Experts,
Can any one let me know how to disable save button on selection screen (1000) run from other report.
Say I am running from report R1 which submits report R2, but the save button should be disabled on
report R2(selection screen 100).
Thanks in advance.
Regards
RP.

Hi RPReddy16 ,
Try this:
DATA :BEGIN OF t_extab occurs 0,
fcode like rsmpe-func,
END OF t_extab.
REFRESH T_EXTAB.
MOVE 'SAVE' TO T_EXTAB-FCODE.
APPEND T_EXTAB.
CLEAR T_EXTAB.
SET PF-STATUS 'STATUS' EXCLUDING T_EXTAB.
Regards,
José

Hiding Screen fields in a Report selection screen

Hi Experts,
I have a requirement to hide/disable screen fields in a report selection screen when the user clicks on some radio buttons .
Here is the scenario,
1) There are 4 radio buttons four radiobuttons in one group on the selection screen:--
Block no:1
PARAMETER: r_not TYPE c RADIOBUTTON GROUP a1 DEFAULT 'X'.
PARAMETER: r_prgs TYPE c RADIOBUTTON GROUP a1.
PARAMETER: r_remv TYPE c RADIOBUTTON GROUP a1.
PARAMETER: r_noresp TYPE c RADIOBUTTON GROUP a1.
2) Based on the user clicking/selecting the radio buttons no.2,3 nad 4 i need to hide some fields in the other selection block
in the selection screen.The parameters are as follows:
Block no:2( These fields need to be hidden/disabled)
PARAMETER: r_occ(3) TYPE c OBLIGATORY DEFAULT '1'.
PARAMETER: r_and TYPE c RADIOBUTTON GROUP g1.
PARAMETER: r_or TYPE c RADIOBUTTON GROUP g1.
PARAMETER: r_days(3) TYPE c OBLIGATORY DEFAULT '1'.
Thanks

Contd.....
AT SELECTION-SCREEN.
CASE SSCRFIELDS-UCOMM.
      "When Customer button is clicked set flag 1
    WHEN 'FC01'.
      L_FLAG = '1'.
      "When Sales Order button is clicked set flag 2
    WHEN 'FC02'. "Sales order
      L_FLAG = '2'.
      "When Execute button is clicked set flag 4
    WHEN OTHERS.
      L_FLAG = '4'.
ENDCASE.
AT SELECTION-SCREEN OUTPUT.
CASE L_FLAG.
    WHEN '1'. "When Customer button is clicked
      LOOP AT SCREEN.
        "Set the Production and Customer Block as inactive
        IF SCREEN-GROUP1 = 'BL1' OR SCREEN-GROUP1 = 'BL3'.
          SCREEN-ACTIVE = '0'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    WHEN '2'. "When Sales Order button is clicked
      LOOP AT SCREEN.
        "Set the Production and Customer Block as inactive
        IF SCREEN-GROUP1 = 'BL1' OR SCREEN-GROUP1 = 'BL2'.
          SCREEN-ACTIVE = '0'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    WHEN '3'.   "When Refresh button is clicked
      LOOP AT SCREEN.
        "Set the all Blocks as active
       IF SCREEN-GROUP1 = 'BL2' OR SCREEN-GROUP1 = 'BL3' OR SCREEN-GROUP1 = 'BL1'.
          SCREEN-ACTIVE = '1'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    WHEN OTHERS."When Execute button is clicked
      "Set the Sales order and Customer Block as inactive
      LOOP AT SCREEN.
        IF SCREEN-GROUP1 = 'BL2' OR SCREEN-GROUP1 = 'BL3'.
          SCREEN-ACTIVE = '0'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
ENDCASE.
ENDFORM.

How to capture a selected row in a table control in screen

Hello,
    I have a table in a screen and hv data in it also from a table.Now i want if a user selects a row n clicks a display button , i should display the same fields in empty text fields created outside the table on the same screen.
Rite now i m lookin for single selection but any help on multiple selection is also welcomed.
I have given a line-selection element name as 'LSELECT1' to the table in screen painter n have declared a variable also with the same name of type C(1) in my abap prog.But dont know wat to write in PAI now to caputure the selected row.
THANKS

Hi,
Use ALV to display your table records from FM 'REUSE_ALV_GRID_DISPLAY'.
In your internal table add a field with char1. This will show you the selected records by 'X' or ' '. Use this field in your layout like g_layout-box_fieldname = 'CHK'.
Here i used CHK TYPE CHAR1 added to internal table to display. Now ur ALV will be showing u a column to select records. U can select multiple records also. Evry selected record will reflect into internal table by modifying value of CHK as 'X'. Add button to ALV by creating PF-STATUS and add code its behavior when executed.
DATA: BEGIN OF ls_ekko,
      ebeln TYPE ekko-ebeln, " this is my internal table showed in alv
      bukrs TYPE ekko-bukrs,
      bstyp TYPE ekko-bstyp,
      bsart TYPE ekko-bsart,
      lifnr TYPE ekko-lifnr,
      ekorg TYPE ekko-ekorg,
      ekgrp TYPE ekko-ekgrp,
      waers TYPE ekko-waers,
      chk(1)   TYPE c, " check field
      END OF ls_ekko.
DATA it_ekko LIKE TABLE OF ls_ekko.
DATA : gt_fcat    TYPE slis_t_fieldcat_alv WITH HEADER LINE,
       g_layout   TYPE slis_layout_alv,
       gt_fcat1    TYPE slis_t_fieldcat_alv WITH HEADER LINE,
       g_layout1   TYPE slis_layout_alv.
g_layout-colwidth_optimize = 'X'.
g_layout-box_fieldname = 'CHK'. " adding check field to alv
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
   i_callback_program                = sy-repid
   i_callback_pf_status_set          = 'PF_STATUS_ALV'
   i_callback_user_command           = 'USER_COMMAND_ALV'
IT_EXCLUDING                      =
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
      is_layout          = g_layout
      it_fieldcat        = gt_fcat[]
      i_default          = 'X'
      i_save             = 'A'
    TABLES
      t_outtab           = it_ekko
    EXCEPTIONS
      program_error      = 1
      OTHERS             = 2.
*&      Form PF_STATUS_ALV
    Subroutine for PF status
     -->RT_EXTAB   text
FORM pf_status_alv USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'SELOBJ' EXCLUDING rt_extab.
ENDFORM.                    "PF_STATUS_ALV
Hope this help

If I do not select F11 ( full screen ) a big part of the screen "falls" of the right hand side of my monitor and is not readable, I am not able to find the neccesary adjustments.

Question
If I do not select F11 ( full screen ) a big part of the screen "falls" of the right hand side of my monitor and is not readable, I am not able to find the neccesary adjustments.
Screen 2/3 blanco on the left side
With F11 all OK.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Selection-screen as subscreen in other selection screen

Similar Messages

Maybe you are looking for