Selection Screen, + different selections for different t.code

Hello Friends,
I have following requirement, that I have a program which is called via a tcode. Now I have to create another tcode for the same program. I have created the new tran and it works fine. But now the requirement is, this new tran. should not show all selectoption ( inside a block ) and two another select - option block ?
As far as I remember, one can use initilization, and can loop over selection screen ? any idea how to eleiminate the selection screen ? or any docu would be really appreiciated.
Thanks..

Thanks ,
As I said, there is one main selection - screen with main block, ...and then are the further blocks inside, so how I can access the inside block:
SELECTION-SCREEN BEGIN OF BLOCK mainframe .
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF BLOCK firstblock WITH FRAME TITLE text-001.
SELECT-OPTIONS:
lest say 4 select options.....
SELECTION-SCREEN END OF BLOCK firstblock.
SELECTION-SCREEN BEGIN OF BLOCK secondblock WITH FRAME TITLE text-002.
SELECT-OPTIONS:
lest say 4 select options.....
SELECTION-SCREEN END OF BLOCK secondblock
Prozessdaten
SELECTION-SCREEN BEGIN OF BLOCK thirdblock WITH FRAME TITLE text-003.
SELECT-OPTIONS:
lest say 4 select options.....
PARAMETERS: so_stat TYPE flag AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK thirdblock.
PARAMETERS:
SELECTION-SCREEN END OF BLOCK mainframe.
Now my req is, when tcode is 2nd, then secondblock, and thirdblock should not appear, and from first block only 2 fields should apper....
is it at all possible, by looping over screen, because when I loop over screen, I could not even see the block name... ( the field block1 field is empty.. )

Similar Messages

Selection-screen dynamic selections for dtab

Hey experts,
when I add this to my code
selection-screen dynamic selections for zbr_t_autori
and I want activate it, it writes out an error
The addition "DYNAMIC_SELECTIONS" is only allowed in INCLUDE DB__SSEL.
and I don't know how to solve it, what is that include db__ssel?
Can anybody help me.
Regards,
Robert

Check this:
Structure of Logical Databases - ABAP Programming (BC-ABA) - SAP Library
Where are you using this code?
selection-screen dynamic selections for zbr_t_autori
It should be in the include reserved for your LDB selection:

Selection-screen fields validation for dialog

Hello ABAP Gurus
Requirements: this is a report wherein , depending upon the correct select-options , user will pick some field values from table and some will be entered by the user in the next se51 custom screen for creation of a record in a ztable .
the problem is :without validating select-options values , it calls the se51 screen 100.
How to keep the cursor at the selection-screen field until & unless user enters the correct i/p s .if i/p are correct then only it should call screen 100 otherwise remain in the selection screen only .
*& Report ZSD_REP_QUOT_BANK_CREATE *
REPORT ZSD_REP_QUOT_BANK_CREATE NO STANDARD PAGE HEADING LINE-SIZE 255.
TABLES: VBAK,VBAP,VBRK,ZSD_TABL_QOTBANK,MARA,KONV.
DATA: OK_CODE LIKE SY-UCOMM,
SAVE_OK_CODE LIKE SY-UCOMM,
WA_ITAB LIKE ZSD_TABL_QOTBANK,
ANSWER TYPE C,
COPIED ,
STS TYPE N,
EMGRP LIKE MARA-EXTWG,
QTY LIKE ZSD_TABL_QOTBANK-QTY,
UPRICE LIKE ZSD_TABL_QOTBANK-UPRICE,
TOT LIKE ZSD_TABL_QOTBANK-TOT,
INO LIKE VBAP-POSNR.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
SELECT-OPTIONS: S_QTNO FOR ZSD_TABL_QOTBANK-QTNO
NO INTERVALS NO-EXTENSION OBLIGATORY,
S_ITNO FOR ZSD_TABL_QOTBANK-ITNO
NO INTERVALS NO-EXTENSION OBLIGATORY.
S_MATNO FOR ZSD_TABL_QOTBANK-MATNO
NO INTERVALS NO-EXTENSION. "
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN.
SELECT SINGLE VBTYP
INTO VBAK-VBTYP
FROM VBAK
WHERE VBELN IN S_QTNO.
IF SY-SUBRC EQ 0 AND VBAK-VBTYP NE 'B'.
MESSAGE I005(ZQOTBANK).
SET CURSOR FIELD S_QTNO-LOW.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
CLEAR WA_ITAB.
SELECT SINGLE QTNO ITNO
INTO WA_ITAB
FROM ZSD_TABL_QOTBANK
WHERE QTNO IN S_QTNO
AND ITNO IN S_ITNO.
IF SY-SUBRC EQ 0.
MESSAGE I001(ZQOTBANK).
SET CURSOR FIELD S_QTNO-LOW.
SET CURSOR FIELD S_ITNO-LOW.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
*START-OF-SELECTION.
END-OF-SELECTION.
CALL SCREEN 0100.
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS '0100'.
SET TITLEBAR '0100'.
ZSD_TABL_QOTBANK-QTNO = S_QTNO-LOW.
SELECT SINGLE BUKRS_VF VKORG VTWEG SPART KUNNR ERDAT BNDDT
KNUMV
INTO (ZSD_TABL_QOTBANK-CCODE,
ZSD_TABL_QOTBANK-SORG,
ZSD_TABL_QOTBANK-DISTCHAN,
ZSD_TABL_QOTBANK-DIV,
ZSD_TABL_QOTBANK-CUSTNO,
ZSD_TABL_QOTBANK-QTDAT,
ZSD_TABL_QOTBANK-QTVALDAT,
VBAK-KNUMV)
FROM VBAK
WHERE VBELN IN S_QTNO
AND VBTYP = 'B'.
IF SY-SUBRC EQ 0.
SELECT SINGLE KWMENG POSNR MATNR
INTO (QTY , INO , ZSD_TABL_QOTBANK-MATNO)
FROM VBAP
WHERE VBELN IN S_QTNO.
SELECT SINGLE EXTWG
INTO EMGRP
FROM MARA
WHERE MATNR EQ ZSD_TABL_QOTBANK-MATNO.
ZSD_TABL_QOTBANK-ITNO = INO.
ZSD_TABL_QOTBANK-EMATGRP = EMGRP.
ZSD_TABL_QOTBANK-QTY = QTY.
SELECT SINGLE KBETR
INTO UPRICE
FROM KONV
WHERE KNUMV = VBAK-KNUMV
AND KPOSN = INO
AND KSCHL = 'PR00'.
ENDIF.
ZSD_TABL_QOTBANK-UPRICE = UPRICE.
TOT = QTY * UPRICE .
ZSD_TABL_QOTBANK-TOT = TOT .
CLEAR: QTY, UPRICE, TOT.
QTY = ZSD_TABL_QOTBANK-CGL_QTY.
UPRICE = ZSD_TABL_QOTBANK-CGL_UPRICE .
TOT = QTY * UPRICE .
ZSD_TABL_QOTBANK-CGL_TOT = TOT .
CLEAR: QTY, UPRICE, TOT.
QTY = ZSD_TABL_QOTBANK-BHEL_QTY.
UPRICE = ZSD_TABL_QOTBANK-BHEL_UPRICE .
TOT = QTY * UPRICE .
ZSD_TABL_QOTBANK-BHEL_TOT = TOT .
CLEAR: QTY, UPRICE, TOT.
QTY = ZSD_TABL_QOTBANK-BHEL_QTY.
UPRICE = ZSD_TABL_QOTBANK-BHEL_UPRICE .
TOT = QTY * UPRICE .
ZSD_TABL_QOTBANK-BHEL_TOT = TOT .
CLEAR: QTY, UPRICE, TOT.
QTY = ZSD_TABL_QOTBANK-ALSTOM_QTY.
UPRICE = ZSD_TABL_QOTBANK-ALSTOM_UPRICE .
TOT = QTY * UPRICE .
ZSD_TABL_QOTBANK-ALSTOM_TOT = TOT .
CLEAR: QTY, UPRICE, TOT.
QTY = ZSD_TABL_QOTBANK-SIEMENS_QTY.
UPRICE = ZSD_TABL_QOTBANK-SIEMENS_UPRICE .
TOT = QTY * UPRICE .
ZSD_TABL_QOTBANK-SIEMENS_TOT = TOT .
CLEAR: QTY, UPRICE, TOT.
QTY = ZSD_TABL_QOTBANK-TELK_QTY.
UPRICE = ZSD_TABL_QOTBANK-TELK_UPRICE .
TOT = QTY * UPRICE .
ZSD_TABL_QOTBANK-TELK_TOT = TOT .
CLEAR: QTY, UPRICE, TOT.
QTY = ZSD_TABL_QOTBANK-OTH_QTY.
UPRICE = ZSD_TABL_QOTBANK-OTH_UPRICE .
TOT = QTY * UPRICE .
ZSD_TABL_QOTBANK-OTH_TOT = TOT .
CLEAR: QTY, UPRICE, TOT.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
CASE OK_CODE.
WHEN 'SAVE'.
INSERT ZSD_TABL_QOTBANK.
IF SY-SUBRC EQ 0.
MESSAGE I000(ZQOTBANK).
COMMIT WORK.
CALL SELECTION-SCREEN 1000.
ELSE.
MESSAGE E001(ZQOTBANK).
CALL SELECTION-SCREEN 1000.
ENDIF.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module EXIT_COMMAND INPUT
text
MODULE EXIT_COMAND INPUT.
SAVE_OK_CODE = OK_CODE.
CLEAR OK_CODE.
CASE SAVE_OK_CODE.
WHEN 'CANCEL'.
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
TITLEBAR = 'Quotation Bank Entry'
TEXT_QUESTION = 'Do you want to Cancel ?'
TEXT_BUTTON_1 = 'Yes'
TEXT_BUTTON_2 = 'No'
DEFAULT_BUTTON = '2'
IMPORTING
ANSWER = ANSWER.
IF ANSWER = '1'.
LEAVE PROGRAM.
ELSE.
CALL SELECTION-SCREEN 1000.
ENDIF.
WHEN 'EXIT'.
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
TITLEBAR = 'Quotation Bank Entry'
TEXT_QUESTION = 'Do you want to Exit ?'
TEXT_BUTTON_1 = 'Yes'
TEXT_BUTTON_2 = 'No'
DEFAULT_BUTTON = '2'
IMPORTING
ANSWER = ANSWER.
IF ANSWER = '1'.
LEAVE PROGRAM.
ELSE.
CALL SELECTION-SCREEN 1000.
ENDIF.
ENDCASE.
ENDMODULE. " EXIT_COMMAND INPUT
Thnx in Advance

Put the statement
CALL SCREEN 100
in the event <b>AT SELECTION-SCREEN</b> and NOT in <b>END-OF-SELECTION</b>.
Regards,
Subramanian V.

Showing different exceptions for different ResultSetTypes??

For the code below, I am getting different exceptions for different ResultSet types.
ResultSet rs = stmt.executeQuery("Select * from usermaster");
rs.absolute(3);
rs.updateString("emailID", "newID");
rs.updateRow();
For ResultSet -> ResultSet.TYPE_SCROLL_INSENSITIVE, ResultSet.CONCUR_READ_ONLY, I am getting following exception
java.sql.SQLException: [Microsoft][ODBC SQL Server Driver]Invalid attribute/option identifier
     at sun.jdbc.odbc.JdbcOdbcResultSet.setPos(JdbcOdbcResultSet.java:5017)
     at sun.jdbc.odbc.JdbcOdbcResultSet.updateRow(JdbcOdbcResultSet.java:4009)
     at DBConnector.<init>(DBConnector.java:56)
For ResultSet -> ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_UPDATABLE, I am getting following exception
java.sql.SQLException: [Microsoft][ODBC SQL Server Driver]String data, right truncation
     at sun.jdbc.odbc.JdbcOdbcResultSet.setPos(JdbcOdbcResultSet.java:5017)
     at sun.jdbc.odbc.JdbcOdbcResultSet.updateRow(JdbcOdbcResultSet.java:4009)
     at DBConnector.<init>(DBConnector.java:56)
I am using SQL Server 2000, and JDK1.4 beta.
I am not able to identify what is going wrong here? Please help

ResultSet.absolute(int) is a JDBC 2.0 function,
currently most JDBC-ODBC driver only support jdbc
1.1,
check your jdbc driver.
It is so common why there is no compilation error, but
throw exception in Production.
RexI have JDBC2.0

I want to change different icon for different leaf node

Hi,
i am reading file system(win 2000)and showing in a tree.i want to
show different icon for different file extension.
Pl suggest me with sample code,how should i do?
Thanx

Hi...
To do this, u need to write ur own TreeCellRenderer.
ex :
class FileSystemTreeCellRenderer extends JLabel implements TreeCellRenderer
     File file= null;
     public FileSystemTreeCellRenderer(File f)
          this.file = f;
     public Component getTreeCellRendererComponent
               JTree tree,
               Object value,
               boolean selected,
               boolean expanded,
               boolean leaf,
               int row,
               boolean hasFocus
          if(file.isDirectory())
               setIcon("your image");
               setText("file/dir name");
          else
               setIcon("your other image");
               setText("file/dir name");
     return this;
Hope it suits ur need .. (also, using the file extensions, u can set different icons following the above strategy...)
Regards,
Ramanujam

How can i set different font for different tabs/pages

I want to set different fonts for different tabs/pages?
is it possible to do the same? If yes how?
I can change the fonts under tools>options>contents>advanced. but that changes global settings.
tried some add ons too- but that too changes the global settings.
some pages like tweetdeck do not display icons etc properly under custom fonts.
when i check "allow pages to select their own font" tweetdeck shows up fine but a number of other pages show fonts that are too big or some non standard fonts.
Is there a way where i can select site default fonts for some sites/tabs, and custom fonts for other sites/tabs?
otherwise i have to open different sites in different browsers- say i use my custom fonts- which apply globally, and open tweetdeck etc in Internet Explorer or Chrome etc. if i can have all tabs in one window/browser, that would be great.

It's not a built-in feature to override a page's styles on a tab-by-tab or site-by-site basis, but perhaps someone has created an add-on for this?
It also is possible to create style rules for particular sites and to apply them using either a userContent.css file or the Stylish extension. The Greasemonkey extension allows you to use JavaScript on a site-by-site basis, which provides further opportunity for customization. But these would take time and lots of testing to develop and perfect (and perfection might not be possible)...
Regarding size, does the zoom feature help solve that part? In case you aren't familiar with the keyboard and mouse shortcuts for quickly changing the zoom level on a page, this article might be useful: [[Font size and zoom - increase the size of web pages]].

Tabular form - Different LOV for different rows

In a tabular form column, is it possible to have a select list whose values depend on some other column in the row? There doesn't appear to be a way to use #COL# notation to refer to current row values in the LOV query definition.
Ideas? Thanks

Hi Scott,
Thanks ..I formed some idea about APEX_UTIL.KEYVAL_NUM. I have a problem where I am not able to decide if I can make use of this package and solve..
Can you please have a look at this thread.. Re: Tabular form - Different LOV for different rows
I have a SQL which populates a tabular form on the page.Coulmn1 some text, Column 2 is to show a drop down as YES and NO. i am trying to freeze the option for rows 2,3,4 as NO, if the Option choosen in first is NO.
So, what I am trying to ask is..can I save my first selection in a global variable and use it in where clause of [select list query] the second drop down..Not sure how I can do this..Appreciate if you can show me a direction.
Thanks,
Chaitu.

Want to use ldb selection screen with select queries

I want to use ldb selection screen with select queries since ldb having performance issue .How can I use the fields of the dynamic selection of LDB in the select queries

Hi,
Check the code snippet below: Here 'XXXX' is the table for your select query.
DATA L_DS_CLAUSES TYPE RSDS_WHERE.
MOVE 'XXXX' TO L_DS_CLAUSES-TABLENAME.
READ TABLE DYN_SEL-CLAUSES WITH KEY L_DS_CLAUSES-TABLENAME
                             INTO L_DS_CLAUSES.
SELECT * FROM XXXX
          WHERE field1 IN ...
           AND   field2 ....
           AND (L_DS_CLAUSES-WHERE_TAB).
      PUT XXXX.
ENDSELECT.
You can also try using the FM 'RS_REFRESH_FROM_DYNAMICAL_SEL' passing SY-CPROG in curr_report and 'M' for mode to get the dynamic selection screen values.
Regards,
Munesh.

Using Selection screen and selection screen output

Hi All,
I am trying to execute AT SELECTION-SCREEN and AT SELECTION-SCREEN output. Both the para's working fine seperately. But when I execute them together AT SELECTION-SCREEN output is not working. Please let me know how to solve this problem. Please see below for the code.
PARAMETERS: p_werks LIKE marc-werks OBLIGATORY MEMORY ID WRK,
             p_lgort LIKE mard-lgort OBLIGATORY,
             p_rlgort LIKE mard-lgort OBLIGATORY.
    PARAMETERS: p_boml TYPE c RADIOBUTTON GROUP mode user-command flag.
        SELECTION-SCREEN: BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
            PARAMETERS: p_aufnr LIKE aufk-aufnr MODIF ID cp2.
        SELECTION-SCREEN: END OF BLOCK b1.
*SELECTION-SCREEN COMMENT 1(44) text-004 FOR FIELD p_cmpl.
    PARAMETERS: p_cmpl TYPE c RADIOBUTTON GROUP mode.
       SELECTION-SCREEN: BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
            PARAMETERS: p_matnr type marc-matnr MODIF ID cp1,
                        p_verid type afpo-verid MODIF ID cp1,
                        p_labst type mard-labst MODIF ID cp1.
       SELECTION-SCREEN: END OF BLOCK b2.
   PARAMETERS: p_mstr TYPE c RADIOBUTTON GROUP mode.
AT SELECTION-SCREEN output.
LOOP AT SCREEN.
    IF p_boml <> 'X' AND
       screen-group1 = 'CP1'.
       screen-active = '1'.
       MODIFY SCREEN.
    ENDIF.
    IF p_cmpl <> 'X' AND
       screen-group1 = 'CP2'.
       screen-active = '1'.
       MODIFY SCREEN.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
AT SELECTION-SCREEN.
IF p_boml EQ 'X'.
    IF p_AUFNR EQ space.
        MESSAGE e000(z1) WITH 'Please fill Production Order.'.
    ENDIF.
endif.
IF p_cmpl EQ 'X'.
    IF p_MATNR EQ space OR p_verid EQ space OR p_labst EQ space.
        MESSAGE e000(z1) WITH text-003 'Production Version & Quantity. '.
    ENDIF.
endif.
Thanks,
Senthil

Hi Senthil,
As far as my knowledge is concerned AT Selection-Screen output and AT Selection-Screen wont work together.In this code you are trying to do the validation in AT Selection-Screen. Instead of that try doin your validations in Start-of-selection Event.
i,e., modify your code as follows:
PARAMETERS: p_werks LIKE marc-werks OBLIGATORY MEMORY ID WRK,
p_lgort LIKE mard-lgort OBLIGATORY,
p_rlgort LIKE mard-lgort OBLIGATORY.
PARAMETERS: p_boml TYPE c RADIOBUTTON GROUP mode user-command flag.
SELECTION-SCREEN: BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_aufnr LIKE aufk-aufnr MODIF ID cp2.
SELECTION-SCREEN: END OF BLOCK b1.
*SELECTION-SCREEN COMMENT 1(44) text-004 FOR FIELD p_cmpl.
PARAMETERS: p_cmpl TYPE c RADIOBUTTON GROUP mode.
SELECTION-SCREEN: BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: p_matnr type marc-matnr MODIF ID cp1,
p_verid type afpo-verid MODIF ID cp1,
p_labst type mard-labst MODIF ID cp1.
SELECTION-SCREEN: END OF BLOCK b2.
PARAMETERS: p_mstr TYPE c RADIOBUTTON GROUP mode.
AT SELECTION-SCREEN output.
LOOP AT SCREEN.
IF p_boml <> 'X' AND
screen-group1 = 'CP1'.
screen-active = '1'.
MODIFY SCREEN.
ENDIF.
IF p_cmpl <> 'X' AND
screen-group1 = 'CP2'.
screen-active = '1'.
MODIFY SCREEN.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
START-OF-Selection.
Perform validation.
form validation.
IF p_boml EQ 'X'.
IF p_AUFNR EQ space.
MESSAGE e000(z1) WITH 'Please fill Production Order.'.
ENDIF.
endif.
IF p_cmpl EQ 'X'.
IF p_MATNR EQ space OR p_verid EQ space OR p_labst EQ space.
MESSAGE e000(z1) WITH text-003 'Production Version & Quantity. '.
ENDIF.
endif.
endform.
Kindly reward if useful.
Thanks,
pavithra

Different aggregation for different Dimensions

Hello,
is it possible to have different aggregations on different dimensions.
I have following situation:
I have a measure per client and day.
I'm interested in the maximum per month from the daily sums over clients.
In the measure properties I can only choose between Maximum and Sum in general but not per Dimensions.
To clearify what i mean here is some sample data.
* * Client A * Client B *
* 2014-11-28 * 7 * 8 * SUM() = 15
* 2014-11-29 * 6 * 8 * SUM() = 14
* 2014-11-30 * 6 * 10 * SUM() = 16 <-- monthly max
* 2014-12-01 * 7 * 8 * SUM() = 15
* 2014-12-02 * 5 * 12 * SUM() = 17 <-- monthly max
* 2014-12-03 * 6 * 9 * SUM() = 15
This data is stored in my fact table with reference to date and client dimensions.
This example data would have to be reported as:
/* Report on measure
* * Measure *
* 2014-11 * 16 *
* 2014-12 * 16 *
* Report on measure per client
(max per client and month)
* * Client A * Client B *
* 2014-11 * 7 * 8 *
* 2014-12 * 7 * 12 *
Can this be achieved with SSAS? Didn't find any property for that on the measure.
Best Regards,
Thomas

Hi Thomas,
According to your description, you want to calculate different aggregation for different dimensions, right?
Based on your scenario, I tested it on AdventureWorks cube, the query below is for you reference.
with member [Customer].[Country].[USA & Canada] as
Aggregate( { [Customer].[Country].&[United States],
[Customer].[Country].&[Canada]
member [Measures].[MaxAmount]
as
max([Date].[Calendar].currentmember.children,[Measures].[Internet Sales Amount])
select {[Customer].[Country].&[United States],[Customer].[Country].&[Canada],[Customer].[Country].[USA & Canada]} on 0,
[Date].[Calendar].[Month].members on 1
from
[Adventure Works]
where [Measures].[MaxAmount]
Here is similar thread with yours, please see:
https://social.technet.microsoft.com/Forums/en-US/1bd493ef-f957-4fd5-916b-ee60639106c3/calculated-member-different-aggregations-on-different-dimensions?forum=sqlanalysisservices
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Different LOV for different rows

Hi,
Imagine a tabular report with a number of rows, and a select list for each row populated based on data in that row.
I've seen a solution for this in a few threads, but I've tried to replicate it in 4.2.1.00.08 with no success
Select list filter in a tabular form problem
Tabular form - Different LOV for different rows
my query includes this as a column
APEX_UTIL.SAVEKEY_NUM(duration) durationwith another column defined as "Select List (query based on LOV)" using
select apex_util.keyval_num d, apex_util.keyval_num r from dualand while the duration varies, the LOV is always stagnant.
This occurs in both classic & updateable reports (tabular forms).
I was skeptical that it would work anyway, since I'm sure the query is resolved/bound before rendering each LOV - but that's just assuming background process logic.
Is the only alternative solutions to use APEX_ITEM.SELECT_LIST_FROM_QUERY() ?
Scott

Ahh, I had only tried that on my classic report example. It only seems to have that effect on the tabular form.
Makes me hesitant to use it with that kind of behaviour.
When comparing normal tabular form, one set to generic, and another changed back - I saw no differences in the metadata that I would think have some form of impact on rendering behaviour
APEX_APPLICATION_PAGE_RPT
APEX_APPLICATION_PAGE_REGIONS -- customization/timeout_cache_after changed, component_signature had trailing 0
APEX_APPLICATION_PAGE_RPT_COLS -- lost tabular form attributes, region had lost selector column, in fact I'm having trouble bringing it back to a point where it actually saves data.
Scott

Are iPads built with different configurations for different countries?

Are iPads built with different configurations for different countries?

deebeeque wrote:
I live in the U.S. but am moving to Brazil. I would like to purchase an iPad here in the U.S. but want to have it set up for Brazil, ie: language, operation, WiFi. Can all of this be done by selecting the country specific configuration at the setup stage?
You can certainly chose the language when you set it up. WiFi is an international standard, no difference between US and Brazil. You can further go into Settings - General - International and select language, as well as keyboards and region format.
Also, Is it possible to order the iPad (to be shipped to me in the U.S.) with packaging material (ie: operation manual, etc.) in the Brazilian Portuguese language?
There is no operation manual included - English, Portuguese, or any other language. You can find the one you need at http://support.apple.com/pt_BR/manuals/.
Additionally, does Brazil have 4G?
I'm not sure, but as of now the only countries where the iPad 4G will work are the US and Canada - other countries that have 4G use different frequencies.

S/w to add different ringtone for different contac...

i need s/w to add different ringotnes for different contacts for Nokia N70 phones this features is availalble in somne models of Nokia phones but in N70 this feature is not available... i need 3rd party such software for Nokia N70

Hey sunil its not a special application or operator based application....
Just goto Ur desired contact and click ok(Selection key)
*Click options
*scroll to Ringing tone which is in next flicker page down of Assign speed dial
*select ur desired rungtone for that contact
*clcik ok(selection key) and you re done~
You can also Make a Group and assign Group Ringtone u Wish
Cheers..
Regards,
AkKiNeNi JaJi

Q or Enhancement: Different Playlist for different weekdays for iPod Alarm

Current:I can associate a Playlist for an Alarm Setting in IPOD classic.
Required: How to enable different playlists for different weekdays for an iPod Alarm?
Appreciate responses.

I think you will have to create a different alarm for each day. Name the alarm by the day of the week and select the desired playlist for that day of the week.

Different price for different batches

hai, is there any possibility of maintaining differenet prices for different batches.
say for example i put 10 pieces into 1 batch and like that maintain 10 batches.
for each batch i want to maintain different prices.
is it possible.
Thanks in advance

The link mentioned talks about production / proportion units which deals with different conversions for different batches. For example in leather industry, basic unit may be piece but sales unit may be sq feet. And each piece has different area so proportion unit may be used.
But as i understand your requirement is just to have different prices for different batches but the units, conversions will remain the same for all batches.
Maintaining a batch specific price is a standard feature of SD pricing; create an access sequence with field batch (CHARG).
However one potential danger with this is when the user changes the batch, price will not be updated automatically (unlike when you update plant). To redetermine price automatically whenever batch is changed, you can use the exit below.
Include: MV45AFZB
Form: USEREXIT_NEW_PRICING_VBAP CHANGING NEW_PRICING.
Code:
if VBAP-CHARG ne *VBAP-CHARG
new_pricing = 'C'.
endif

Different layouts for different pages

hi all,
i have created a form in which there are 5 output pages but the print preview shows only the first page out of 5.i want to go to the next page.plz help how would i do that.and i want different layouts for different pages.
thnks n regards,
mukesh.

Hi Mukesh,
Read these lines which has been given in help.sap.com and also go through the link given below.
Main Window on Several Draft Pages :
if you want the pages on which a table with items is printed to have different layouts. Height and position of the main window may differ on the different pages, but the width must remain the same throughout.
[Main Window|http://help.sap.com/saphelp_nw70/helpdata/en/b1/243fdabeee11d4b633006094192fe3/content.htm]
Regards,
Sravanthi

Selection Screen, + different selections for different t.code

Similar Messages

Maybe you are looking for