Selection-screen (field from .Include structure)
Hi all,
I have a selection screen with several select-options. One of the select-option is
select-options: s_vornr for afvc-vornr.
Where 'vornr' is a .Include structure field in the table 'afvc'. Now my question is, in selection screen when I click on the box for this particular select-option I dont see the circle(from where we can select the existing input values) at the end of the box.
Why is it so and how can get that circle option at the end of the box by sticking to the same table and field(afvc-vornr).
Waiting for your help.
Thanks
hi,
the field do not have nay value range with it.
you can put the F4 help by using
At Selection-Screen on Value-request <select-option>. event.
e.g.
DATA : rt_values TYPE STANDARD TABLE OF type_values,
rs_values TYPE type_values,
rt_fields TYPE STANDARD TABLE OF type_fields,
rs_fields TYPE type_fields.
CLEAR : rs_values,rs_fields.
REFRESH : rt_values,rt_fields.
Creation of selection list
rs_fields-tabname = 'AFVC'.
rs_fields-fieldname = 'VORNR
rs_fields-selectflag = ' '.
APPEND rs_fields TO rt_fields.
SELECT vornr form AFVC
INTO TABLE t_vornr.
SORT t_vornr.
DELETE ADJACENT DUPLICATES FROM t_vornr.
LOOP AT t_vornr INTO s_vornr.
rs_values = s_vornr-vornr.
APPEND rs_values TO rt_values.
CLEAR rs_values.
ENDLOOP.
FUNCTION 'HELP_VALUES_GET_WITH_TABLE' EXPORTING
fieldname = 'AFVC'
tabname = 'VORNR
titel = 'Counting
IMPORTING
select_value = <select-opion>
TABLES
fields = rt_fields
valuetab = rt_values.
amit
Message was edited by: Amit Khare
Similar Messages
-
Selecting desired fields from extract structure to datasource in CRM
hi guys... coming back to this forum with new problem...
how are you guys...
i'm using ds 0CRM_SALES_ACT_1 in CRM to extract activities related data...
by standard this data source is not supplying some fields which i needed... but when i checked in 'roosfield' table and even in extract structure 'CRMT_BW_DS_ACTIVITY' it is showing the those fields which i required...
how can i get these fields to data source...
in LO its like...we can select required field from extract sturcture right???
is there any procedure do same with CRM data sources...
thnaking you...
regards...
nithin
Message was edited by: nith lHi,
If the fields are available in ES but not available in DS , then we can Modify the table ROOSFIELD. But, I think, this is some what rude mothod.
Before doing this, It is better to Raise a OSS. They may come out with some SP upgradation.
Search this forum with ROOSFIELD.
With rgds,
Anil Kumar Sharma .P -
How to get full row from F4 pop up window into selection-screen fields
HI ,
I had a selection screen having 3 fields (vbeln, posnr, ebeln )
If i press F4 on field 1 i will get a pop up having all values.
If i click on any one row in that popup, only the first field is getting filled with the value. But i want all the other fields to be filled with the corresponding values in the screen simultaneously.
Please let me know is there any solution for this...
Regards,
Kanth....Hi
U should base your selection-screen on a dictionary structure whith those three fields where you assign your search help exporting all values (VBELN, POSNR and EBELN).
In this way you'll obtain what you need automatically
Else you can manage it in POV event by your selef.
Max -
Adding fields from KOMK structure to screen painter.
Hello Everyone,
i have created an Extra tab(like ADDITIONAL DATA B) using BADI, i have added fields from VBAP table, its working fine. But when i add fields from KOMK structure(KOMK-STCEG) only empty field is showing. Do i need to code something in PBO or PAI?
Thanks & Regards,
NarsiReddy Cheruku.Hello NarsiReddy,
I assume that you have linked the field KOMK-STCEG using "Get from Dictionary" option from your above screenshot.
In PBO section, make sure to write the logic to update the value in the field. The logic which you would build, would be based on your requirement. For instance, you can use BELNR to check and its corresponding STCEG could be found in the structure KOMK.
But if the KOMK structure itself is not filled with any value, then there is some problem with your code. Try to check your BADI and its corresponding structures which would get updated at runtime and use them appropriately.
Thank you.
Regards,
Naresh -
How can I get selection screen values from outside of program?
Hi. all.
Now. I'm developing moritoring systems and I have problems. for getting selection screen values in runtime. Is there any function, methods or structure to know this?
I'd like to get selection screen values while several programs working in runtime and update these values to table to show current system's status and input values for users in real time.
For example.
Now. 3 PGMs are working on systems.
each PGM is ZAAA01, ZAAA02, ZAAA03.
and ZAAA01 needs input parameter P01, ZAAA02 needs input parameter P02, ZAAA03 needs input parameter P03.
In this case, I have to know values of P01, P02 and P03.
The mornitoring systems will show current working status of PGMs(ZAAA01~03)' and these PGMs' input values.
As fas as I know, the structure 'SCREEN' can be used in each PGM for runtime. Is there any SAP system structure or something else for this purpose?
I hope your hopeful repsponse.
Thanks.Umm..I need to explain more about this.
of course I know SET, GET PARAMETERS.
But I'd like to minimize coding for each PGM level.
I have over hundreds PGMs and I have to develop the PGM(including tables and structures) that mornitor
all of those PGMs on a report in real-time.
This PGM is kind of Process Manager.
First I should know dialogue job PGM and background job that pass parameters using SAP(ABAP) Memory.
And then I have to update those PGMs' input values via screens into tables in real-time.
So, I couldn't use SET,GET PARAMETERS for this PGM.
I want to know methods that can be used for getting information about runtime PGMs' selection screen field values in SAP systems wide.
Please help me some one knows this. -
Regarding Search help on selection-screen field
Hi there,
I am working on custom tables.
I have a requirement to maintain search pattern on a selection-screen field.
selection-screen parameter: p_name which is company name filed from Z table.
By giving a string like Holl* and by pressing F4 on the field p_name it has to popup a dialogbox having list of company names starting with Holl.
Thanks in advance.
-TulasiHi
Go through the link given below :
How to create a search help for my own fields in selection screen
F4 search help on report selection screen
also try :
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
RETFIELD = 'VKORG'
PVALKEY = ' '
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'P_VKORG'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'C'
TABLES
VALUE_TAB = T_TABLE1
FIELD_TAB = field_tab
RETURN_TAB = RET_TAB
DYNPFLD_MAPPING = DYN_TAB
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
With Regards
Nikunj shah -
Regarding Selection-Screen Field Display
Hi All,
I have issues with Selection-Screen field display.
The Actual issue is i had declared a selection screen field as: <b>s_exgen FOR embk-exgen</b>.
<b>EMBK-EXGEN</b> is actually <b>20</b> Char length field.
But in output display it is being shown as <b>18</b> Char field though i can type in all <b>20</b> characters.
But <b>display</b> restricted to <b>18</b> Characters only.
Can anybody give me the solution for the same!
Thanks in advance.
Thanks & Regards,
Prasad.Hi,
You can decrease the visible length of the field but you can not increase more than database field length. check SAP help on this :
select-options: s_exgen FOR embk-exgen VISIBLE LENGTH 5.
... VISIBLE LENGTH vlen
Effect
This addition allows you to shorten the visible length of the corresponding screen field on the selection screen to vlen.
Variant 2
SELECT-OPTIONS sel FOR (f).
Additions as in variant 1.
Effect
In this variant, (f) must be a field containing the name of the actual reference field at runtime. The system creates the LOW and HIGH fields as character fields with length 45. However, their appearance on the selection <b>screen is inherited from the reference field whose name is contained in field f at runtime.</b>
Regards
Appana -
Validating a selection-screen field
Hi all,
I am Anil.can any body explains me how to validate a selection-screen field for the following scenario?
I have customer nos ranging from 100-1000.among them i dont have any sales orders for the customers who are in between 150-250.I have sales order(VBELN) as select-options and Plant(WERKS) as Parameter on the selection-screen.I want to validate these fields without hardcaode.How can i do that?Please send me the complete code.
I am not getting how to validate a field which is declared as parameter?
regards and thanks in advance.
Anil.Make sure that u are validating against the header table.
say eg if u wnat t validate matnr in marc, then do as below.
SELECT-OPTIONS: s_matnr FOR marc-matnr. "Material No
AT SELECTION-SCREEN.
*Validate material no details
PERFORM validate_matno.
FORM validate_matno.
DATA: v_matnr LIEK mara-matnr.
SELECT SINGLE matnr INTO v_matnr
FROM <b>mara</b>
WHERE matnr IN s_matnr.
IF sy-subrc NE 0.
MESSAGE i128.
LEAVE LIST-PROCESSING.
ENDIF.
ENDFORM.
Dont select from marc.
Hope this is clear. -
How to link a search help to a selection screen field
Hi All,
I am using field PKWRG from PA0017 table in selection screen. I need F4 help there as in Tcode PA30 . But this field does not have value table or check table. However, it has a search help attached 'TRV_PKWRG' .
But, I donot know how to assign a search help to a selection screen field. Please help.
Regards,
NibhaHello,
Fetch all the data which from the table which you want to show in the search help and pass the value to the FM
F4IF_INT_TABLE_VALUE_REQUEST and the selection-screen event must be
at selection-screen on value request parameter or selection option variable.
BCALV_TEST_FULLSCREEN
BCALV_TEST_FULLSCREEN_CALLS
BCALV_TEST_FULLSCREEN_PRINT
BCALV_TEST_FULLSCREEN_STATUS
BCALV_TEST_GRID
BCALV_TEST_GRID_DRAG_DROP
BCALV_TEST_GRID_EDITABLE
BCALV_TEST_GRID_EVENTS
BCALV_TEST_GRID_INDEX
BCALV_TEST_GRID_TOOLBAR
BCALV_TEST_HIERSEQ_LIST
BCALV_TEST_LIST
BCALV_TEST_LIST_PRINT
BCALV_TEST_LIST_STATUS
BCALV_VERIFY_DTYPES_D0100_F01
BCSMENUF01
BDLCOF10
BDLDVI10
BDLTREDF -
Selection-screen fields validation for dialog
Hello ABAP Gurus
Requirements: this is a report wherein , depending upon the correct select-options , user will pick some field values from table and some will be entered by the user in the next se51 custom screen for creation of a record in a ztable .
the problem is :without validating select-options values , it calls the se51 screen 100.
How to keep the cursor at the selection-screen field until & unless user enters the correct i/p s .if i/p are correct then only it should call screen 100 otherwise remain in the selection screen only .
*& Report ZSD_REP_QUOT_BANK_CREATE *
REPORT ZSD_REP_QUOT_BANK_CREATE NO STANDARD PAGE HEADING LINE-SIZE 255.
TABLES: VBAK,VBAP,VBRK,ZSD_TABL_QOTBANK,MARA,KONV.
DATA: OK_CODE LIKE SY-UCOMM,
SAVE_OK_CODE LIKE SY-UCOMM,
WA_ITAB LIKE ZSD_TABL_QOTBANK,
ANSWER TYPE C,
COPIED ,
STS TYPE N,
EMGRP LIKE MARA-EXTWG,
QTY LIKE ZSD_TABL_QOTBANK-QTY,
UPRICE LIKE ZSD_TABL_QOTBANK-UPRICE,
TOT LIKE ZSD_TABL_QOTBANK-TOT,
INO LIKE VBAP-POSNR.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
SELECT-OPTIONS: S_QTNO FOR ZSD_TABL_QOTBANK-QTNO
NO INTERVALS NO-EXTENSION OBLIGATORY,
S_ITNO FOR ZSD_TABL_QOTBANK-ITNO
NO INTERVALS NO-EXTENSION OBLIGATORY.
S_MATNO FOR ZSD_TABL_QOTBANK-MATNO
NO INTERVALS NO-EXTENSION. "
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN.
SELECT SINGLE VBTYP
INTO VBAK-VBTYP
FROM VBAK
WHERE VBELN IN S_QTNO.
IF SY-SUBRC EQ 0 AND VBAK-VBTYP NE 'B'.
MESSAGE I005(ZQOTBANK).
SET CURSOR FIELD S_QTNO-LOW.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
CLEAR WA_ITAB.
SELECT SINGLE QTNO ITNO
INTO WA_ITAB
FROM ZSD_TABL_QOTBANK
WHERE QTNO IN S_QTNO
AND ITNO IN S_ITNO.
IF SY-SUBRC EQ 0.
MESSAGE I001(ZQOTBANK).
SET CURSOR FIELD S_QTNO-LOW.
SET CURSOR FIELD S_ITNO-LOW.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
*START-OF-SELECTION.
END-OF-SELECTION.
CALL SCREEN 0100.
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS '0100'.
SET TITLEBAR '0100'.
ZSD_TABL_QOTBANK-QTNO = S_QTNO-LOW.
SELECT SINGLE BUKRS_VF VKORG VTWEG SPART KUNNR ERDAT BNDDT
KNUMV
INTO (ZSD_TABL_QOTBANK-CCODE,
ZSD_TABL_QOTBANK-SORG,
ZSD_TABL_QOTBANK-DISTCHAN,
ZSD_TABL_QOTBANK-DIV,
ZSD_TABL_QOTBANK-CUSTNO,
ZSD_TABL_QOTBANK-QTDAT,
ZSD_TABL_QOTBANK-QTVALDAT,
VBAK-KNUMV)
FROM VBAK
WHERE VBELN IN S_QTNO
AND VBTYP = 'B'.
IF SY-SUBRC EQ 0.
SELECT SINGLE KWMENG POSNR MATNR
INTO (QTY , INO , ZSD_TABL_QOTBANK-MATNO)
FROM VBAP
WHERE VBELN IN S_QTNO.
SELECT SINGLE EXTWG
INTO EMGRP
FROM MARA
WHERE MATNR EQ ZSD_TABL_QOTBANK-MATNO.
ZSD_TABL_QOTBANK-ITNO = INO.
ZSD_TABL_QOTBANK-EMATGRP = EMGRP.
ZSD_TABL_QOTBANK-QTY = QTY.
SELECT SINGLE KBETR
INTO UPRICE
FROM KONV
WHERE KNUMV = VBAK-KNUMV
AND KPOSN = INO
AND KSCHL = 'PR00'.
ENDIF.
ZSD_TABL_QOTBANK-UPRICE = UPRICE.
TOT = QTY * UPRICE .
ZSD_TABL_QOTBANK-TOT = TOT .
CLEAR: QTY, UPRICE, TOT.
QTY = ZSD_TABL_QOTBANK-CGL_QTY.
UPRICE = ZSD_TABL_QOTBANK-CGL_UPRICE .
TOT = QTY * UPRICE .
ZSD_TABL_QOTBANK-CGL_TOT = TOT .
CLEAR: QTY, UPRICE, TOT.
QTY = ZSD_TABL_QOTBANK-BHEL_QTY.
UPRICE = ZSD_TABL_QOTBANK-BHEL_UPRICE .
TOT = QTY * UPRICE .
ZSD_TABL_QOTBANK-BHEL_TOT = TOT .
CLEAR: QTY, UPRICE, TOT.
QTY = ZSD_TABL_QOTBANK-BHEL_QTY.
UPRICE = ZSD_TABL_QOTBANK-BHEL_UPRICE .
TOT = QTY * UPRICE .
ZSD_TABL_QOTBANK-BHEL_TOT = TOT .
CLEAR: QTY, UPRICE, TOT.
QTY = ZSD_TABL_QOTBANK-ALSTOM_QTY.
UPRICE = ZSD_TABL_QOTBANK-ALSTOM_UPRICE .
TOT = QTY * UPRICE .
ZSD_TABL_QOTBANK-ALSTOM_TOT = TOT .
CLEAR: QTY, UPRICE, TOT.
QTY = ZSD_TABL_QOTBANK-SIEMENS_QTY.
UPRICE = ZSD_TABL_QOTBANK-SIEMENS_UPRICE .
TOT = QTY * UPRICE .
ZSD_TABL_QOTBANK-SIEMENS_TOT = TOT .
CLEAR: QTY, UPRICE, TOT.
QTY = ZSD_TABL_QOTBANK-TELK_QTY.
UPRICE = ZSD_TABL_QOTBANK-TELK_UPRICE .
TOT = QTY * UPRICE .
ZSD_TABL_QOTBANK-TELK_TOT = TOT .
CLEAR: QTY, UPRICE, TOT.
QTY = ZSD_TABL_QOTBANK-OTH_QTY.
UPRICE = ZSD_TABL_QOTBANK-OTH_UPRICE .
TOT = QTY * UPRICE .
ZSD_TABL_QOTBANK-OTH_TOT = TOT .
CLEAR: QTY, UPRICE, TOT.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
CASE OK_CODE.
WHEN 'SAVE'.
INSERT ZSD_TABL_QOTBANK.
IF SY-SUBRC EQ 0.
MESSAGE I000(ZQOTBANK).
COMMIT WORK.
CALL SELECTION-SCREEN 1000.
ELSE.
MESSAGE E001(ZQOTBANK).
CALL SELECTION-SCREEN 1000.
ENDIF.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module EXIT_COMMAND INPUT
text
MODULE EXIT_COMAND INPUT.
SAVE_OK_CODE = OK_CODE.
CLEAR OK_CODE.
CASE SAVE_OK_CODE.
WHEN 'CANCEL'.
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
TITLEBAR = 'Quotation Bank Entry'
TEXT_QUESTION = 'Do you want to Cancel ?'
TEXT_BUTTON_1 = 'Yes'
TEXT_BUTTON_2 = 'No'
DEFAULT_BUTTON = '2'
IMPORTING
ANSWER = ANSWER.
IF ANSWER = '1'.
LEAVE PROGRAM.
ELSE.
CALL SELECTION-SCREEN 1000.
ENDIF.
WHEN 'EXIT'.
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
TITLEBAR = 'Quotation Bank Entry'
TEXT_QUESTION = 'Do you want to Exit ?'
TEXT_BUTTON_1 = 'Yes'
TEXT_BUTTON_2 = 'No'
DEFAULT_BUTTON = '2'
IMPORTING
ANSWER = ANSWER.
IF ANSWER = '1'.
LEAVE PROGRAM.
ELSE.
CALL SELECTION-SCREEN 1000.
ENDIF.
ENDCASE.
ENDMODULE. " EXIT_COMMAND INPUT
Thnx in AdvancePut the statement
CALL SCREEN 100
in the event <b>AT SELECTION-SCREEN</b> and NOT in <b>END-OF-SELECTION</b>.
Regards,
Subramanian V. -
F4 search-help in infoset query selection-screen fields
Hi all,
I created an infoset, and it's corresponding query, and now I need to associate F4 search-help in two of the selection-screen fields. Since they don't have any reference field associated (they are SAP standard table fields), there are no possible values available to select.
How can I do this?
I have already tried to use the "AT SELECTION-SCREEN OUTPUT" in the infoset, but I'm not able to do that. When I try to use the select-options generated by the query (SP$00013 and SP$00014) I have a syntax error with "Field not known".
Can you help me? I never done this before, so I really don't have a guess.
Thanks in advance.
Beste regards,
Sónia GonçalvesHi all,
I have found thread that helped me a lot in this issue.
I just have one more doubt: I created the selection criterion and I can already see it in the query selection-screen, but it's appearing in the top of the selection-screen, in a different area called "General data selections".
Isn't it possible to include it in the "Report-specific selctions"?
Thanks in advance.
Best regards,
Sónia Gonçalves -
How to assign F1 help to the selection screen fields
Hi All,
I have a requirement.I have to create a button named "HELP" at the side of Execute button in the selection screen.If I place my cursor in the selection screen field and I press that "HELP" button, I should get the Documentation help for that field.
Please suggest me on this.
Thanks in advance.
Sreeharsha SinguruHi sreeharsha,
here a short example:
TABLES: MARA.
TABLES: SSCRFIELDS.
TYPE-POOLS: ICON.
DATA: CURSORFIELD(20).
SELECTION-SCREEN: BEGIN OF LINE.
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECT-OPTIONS: S_MTART FOR MARA-MTART.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: SKIP 3.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN: PUSHBUTTON (10) PB01 USER-COMMAND HELP.
SELECTION-SCREEN: END OF LINE.
AT SELECTION-SCREEN.
GET CURSOR FIELD CURSORFIELD.
CASE SSCRFIELDS.
WHEN 'HELP'.
CASE CURSORFIELD.
WHEN 'S_MATNR-LOW'.
CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT' "Make your own Text
EXPORTING
TITEL = 'Information'
TEXTLINE1 = 'Information for field:'
TEXTLINE2 = 'S_MATNR-LOW'
START_COLUMN = 10
START_ROW = 15.
WHEN 'S_MTART-LOW'.
CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT' "Make your own Text
EXPORTING
TITEL = 'Information'
TEXTLINE1 = 'Information for field:'
TEXTLINE2 = 'S_MTART-LOW'
START_COLUMN = 10
START_ROW = 15.
ENDCASE.
ENDCASE.
INITIALIZATION.
CONCATENATE ICON_INFORMATION 'Help' INTO PB01.
START-OF-SELECTION.
SELECT * FROM MARA WHERE MATNR IN S_MATNR.
WRITE: / MARA-MATNR.
ENDSELECT.
Hope it helps.
Regards, Dieter -
VL10 and new selection-screen fields
Hi experts.
My requirement is to add new selection-screen field to second tab in VL10.
After analyse many topics the solution was to copy VL10 to ZVL10.
Also V50R_USEREXIT_TRANSF was copyed and there was added specific code.
Furthemore note:524424 was implemented (header in form definition in V50R_USEREXIT_TRANSF ), and the SHP_VL10_SELECT_OPTIONS was enhanced. As I understood from this stage we have selection-criteria in repeort.
The problem is that I don't know how to transfer this data to ALV.
Any tips ?
Thanks .
Daniel.hi
how did you do that. i have to add select options in coois tcode in header and operational level.but only using badi. using screen enhancement it is possible bt how to do that using bagi "workorder_infosystem"..
please help me out.. -
Difference between At selection-screen and At selection-screen field
I need to know the difference between
Difference between At selection-screen and At selection-screen field
Regards
ShashiHi,
AT SELECTION-SCREEN is the event triggered in the PAI of the selection screen.
AT SELECTION-SCREEN on field field_name is the event specific to the field and is triggered when u press enter in that field.
AT SELECTION-SCREEN selscreen_event.
Effect
This statement defines event blocks for different events selscreen_event that are triggered by the ABAP runtime environment during selection screen processing.
Selection screen events occur immediately before sending a selection screen and after certain user actions on a displayed selection screen. They assist in selection screen processing in the ABAP program.
AT SELECTION-SCREEN is triggered at least twice during actions on selection screens that are linked into another selection screen as a subscreen - first for the linked selection screen itself, and then for the linking selection screens.
SELECTION-SCREEN FIELD SELECTION
FOR {NODE|TABLE} node [ID id].
Effect
This statement defines a node node in the structure of the logical database for field selection. If a node belongs to type T, you can use the TABLE addition instead of NODE. The statement cannot be used for type C nodes. .
If a node is defined for field selection, you can use an executable program linked to the logical database in the GET statement to control which fields in the node are to be read by the logical database. If you use the function module LDB_PROCESS, the FIELD_SELECTION parameter must be specified accordingly.
for more details check this link...
http://help.sap.com/saphelp_46c/helpdata/en/9f/db9a2e35c111d1829f0000e829fbfe/frameset.htm
Regards,
Priyanka. -
How to validate selection-screen field
Hi all,
How to validate a selection-screen field defined as a select-options.for Ex i declared a selection-screen field select-options:s_matnr for mara-matnr.
Then how to validate this field.Hi,
write the below code in AT SELECTION-SCREN.
EX :
AT SELECTION-SCREEN.
*-- Validate the Selection screen data
PERFORM VALIDATE_SELSCR_DATA.
WRITE THE below code in Form "VALIDATE_SELSCR_DATA".
IF S_MATNR[] IS INITIAL.
*--MATNR is initial.
message e000(MsgCLass) with 'matnr is empty'.
ELSE.
SELECT MATNR
INTO MARA-MATNR
FROM MCHA
UP TO 1 ROWS
WHERE MATNR IN S_MATNR.
ENDSELECT.
IF SY-SUBRC <> 0.
MESSAGE E000 WITH 'Invalid MATNR entered'.
ENDIF.
ENDIF.
Maybe you are looking for
-
Advanced table:not able to view more than 10 rows when called from workflow
Hi everyone, I'm calling a page that contains advanced table and its controller class from two places. First one is from a inquiry form, when this page is called it works fine. when there are more than 10 rows, first 10 are shown on page render and w
-
How do I stop a Movie Clip (Button) from working once clicked?
Ok, I'm using a movie clip as a button to show content on a page, effectively its like a new page of the website. Problem is, with the script im using for it, once the content is show, the button is still active and if clicked again, will re-load the
-
QuickTime StartTime not working on iPad
Not sure if this is the place to ask if not please advise. The following code works fine on my desktop but on the iPad it ignores the the start time and starts the playback at the beginning of the clip. For example on MAC desktop using Safari the fol
-
Idoc types and message types we use in IS-Retail
hi gurus, can anyone tell me what are the idoc types and their message types that we use in SAP IS-Retail . Thanks in advance regards gopal
-
My Safari browser on my iPhone4s reads the following error when I visit my site www.premiercreativegroup.com: MuseJSAssert: Error calling selector function:TypeError: 'undefined' is not an object (evaluating 'this.elem.get(0).curren