Selecting desired fields from extract structure to datasource in CRM

hi guys... coming back to this forum with new problem...
how are you guys...
i'm using ds 0CRM_SALES_ACT_1 in CRM to extract activities related data...
by standard this data source is not supplying some fields which i needed... but when i checked in 'roosfield' table and even in extract structure 'CRMT_BW_DS_ACTIVITY' it is showing the those fields which i required...
how can i get these fields to data source...
in LO its like...we can select required field from extract sturcture right???
is there any procedure do same with CRM data sources...
thnaking you...
regards...
nithin
Message was edited by: nith l

Hi,
If the fields are available in ES but not available in DS , then we can Modify the table ROOSFIELD. But, I think, this is some what rude mothod.
Before doing this, It is better to Raise a OSS. They may come out with some SP upgradation.
Search this forum with ROOSFIELD.
With rgds,
Anil Kumar Sharma .P

Similar Messages

Different number of fields in extract structure and Datasource

Hi All,
There is a data source 0FUNCT_LOC_ATTR, which are showing 16 fields in the datasource. But when i went into the extract structure, it shows 25 fields. Is it any kind of bug?
thanks
Annie

Hi MTi,
Thanks for your reply. I checked in ROOSOURCE and ROOSFIELD table and found that we activated the datasource somewhere in 14.08.2008 and the delivered version is in 18.11.2008. Now i reactivated the datasource in RSA5 and could see all the fields in RSA6.
Actaully we posted the issue to SAP and they have come back with the same reply what you have mentioned.
Cheers
Annie

Selection-screen (field from .Include structure)

Hi all,
I have a selection screen with several select-options. One of the select-option is
select-options: s_vornr for afvc-vornr.
Where 'vornr' is a .Include structure field in the table 'afvc'. Now my question is, in selection screen when I click on the box for this particular select-option I dont see the circle(from where we can select the existing input values) at the end of the box.
Why is it so and how can get that circle option at the end of the box by sticking to the same table and field(afvc-vornr).
Waiting for your help.
Thanks

hi,
the field do not have nay value range with it.
you can put the F4 help by using
At Selection-Screen on Value-request <select-option>. event.
e.g.
DATA : rt_values TYPE STANDARD TABLE OF type_values,
          rs_values TYPE type_values,
          rt_fields TYPE STANDARD TABLE OF type_fields,
          rs_fields TYPE type_fields.
CLEAR    : rs_values,rs_fields.
REFRESH : rt_values,rt_fields.
Creation of selection list
rs_fields-tabname     = 'AFVC'.
rs_fields-fieldname   = 'VORNR
rs_fields-selectflag = ' '.
APPEND rs_fields TO rt_fields.
   SELECT vornr form AFVC
                 INTO TABLE t_vornr.
SORT t_vornr.
DELETE ADJACENT DUPLICATES FROM t_vornr.
LOOP AT t_vornr INTO s_vornr.
    rs_values = s_vornr-vornr.
    APPEND rs_values TO rt_values.
    CLEAR rs_values.
    ENDLOOP.
FUNCTION 'HELP_VALUES_GET_WITH_TABLE'                   EXPORTING
      fieldname    = 'AFVC'
      tabname      = 'VORNR
      titel        = 'Counting
    IMPORTING
      select_value = <select-opion>
    TABLES
      fields       = rt_fields
      valuetab     = rt_values.
amit
Message was edited by: Amit Khare

Difference between Extraction Structure and Datasource

Hi Gurus,
I have a very basic question here.Can anybody explain to me in detail the difference between an extraction structure and Datasource.
Thanks in advance

Hi:
I am pasting a summarized def. from sap notes.
http://help.sap.com/saphelp_bw30b/helpdata/en/ad/6b023b6069d22ee10000000a11402f/frameset.htm
Data Source:
Data that logically belongs together is stored in the source system in the form of DataSources. A DataSource contains a number of fields in a flat structure used to transfer data into BW (Extract Structure).
Extract Structure:
In the extract structure, data from a DataSource is staged in the source system. The extract structure contains the amount of fields that are offered by an extractor in the source system for the data loading process.
You can edit and enhance DataSource extract structures in the source system. To do this, in the BW Administrator Workbench choose Goto à Modeling à Source Systems à Your Source System à Context Menu (right mouse click) à Customizing Extractors à Subsequent Processing of DataSources.
While, you are on the topic, you have one more structure.
Transfer Structure:
The transfer structure is the structure in which the data is transported from the source system into the SAP Business Information Warehouse.
It provides a selection of the extract structure fields for the source system.
It may be a good idea to look into a sample Business Content extractor to get a better understanding of how they are related.
Chamarthy

How can we assign Extract Structure of datasource to request to transport

Hi,
I was trying to transport datasource. But it ended with errors due to unavailability of extract structure. So plz guide me how I can assign Extract structure of datasource to request to transpport.
I tried to assign in RSA6 but here there is no option to extract structure to assing to request.

Hi,
Normally when you get the screen to select and hide the fileds and then save it, you will get the extract structure collected automaticaly in your TP request.
Hope it helps
Regards,
Srini

Adding fields from KOMK structure to screen painter.

Hello Everyone,
i have created an Extra tab(like ADDITIONAL DATA B) using BADI, i have added fields from VBAP table, its working fine. But when i add fields from KOMK structure(KOMK-STCEG) only empty field is showing. Do i need to code something in PBO or PAI?
Thanks & Regards,
NarsiReddy Cheruku.

Hello NarsiReddy,
I assume that you have linked the field KOMK-STCEG using "Get from Dictionary" option from your above screenshot.
In PBO section, make sure to write the logic to update the value in the field. The logic which you would build, would be based on your requirement. For instance, you can use BELNR to check and its corresponding STCEG could be found in the structure KOMK.
But if the KOMK structure itself is not filled with any value, then there is some problem with your code. Try to check your BADI and its corresponding structures which would get updated at runtime and use them appropriately.
Thank you.
Regards,
Naresh

Fucntion module to reterieve ANFDT field from the structure RM06E

hi,
I need Function module to reterieve ANFDT field from the structure RM06E or is there any other table for this field.
Regards,
anitha

Anitha,
That looks like the date on which the RFQ is created. What you can do is to get this date from EKKO table for a given RFQ, however you need to check the document category and type to A and AN respecitvely.
Regards,
Ravi
Note : Please mark all the helpful answers

Accessing a field from a structure with out header line

Hi Guys,
I am trying to assign a field from a structure type line of data to another field.
This structure type line don't have a header line.
here is the example.
IT_EKKNU TYPE MMPUR_EKKNU.
when I use following statement..
move IT_EKKNU-kostl to e_cekko-kostl.
Iam getting error "IT_ENKKNU is not a structure or Internal table with header line.
How to access the fields in structure IT_EKKNU.
Thank U for ur time.
Cheers
S Kumar

Here IT_EKKNU is an internal table without Header line.
You can use a structure for assignment.
DATA: IT_EKKNU TYPE MMPUR_EKKNU,
wa_ekknu type ekknu.
read table it_ekknu into wa_ekknu........
move wa_EKKNU-kostl to e_cekko-kostl.
*modify the code for your conditions*.

Adding one more field in extract structure maintenance

Hi Gurus,
I have already extarcted data to BW using 2LIs_13_Vditm datasource and the deltas are also loaded.
Initially when the extract structure(in LBWE) was maintained in LBWE, the field KTGRM-Acct.Assgnmt group was not selected from the POOL.Now there is a requirement to include that in the maintenance of extract structure.
My question is, can i directly add the field to the datasource in R/3,without any coding in CMOD like in enhancements, and replicate again to BW without disturbing the existing data? OR Do I have to add the field in Trans.Stru, Update rules and cube and goahead loading data.
Thanks in advance.
Regards,
Satya

You can add any field listed in the pool of available fields directly to your LO datasource without enhancing the extract structure and coding in CMOD. But be aware to empty the delta queue and the extraction queue before, otherwise you can't change the extract structure.
After replicating the changed datasource you have to update the relevant infoproviders, update rules and the infosource, because the new field was not known before.
It is also recommended to reload the data from the source system in order to populate the new field for all data.

Table of origin for a field in extract structure ??

Is there a way to look at the extract structure of a datasource and know the tables from which its pulling the data from ?
I know I can always get them from help.sap.com by going to datasources and can look at the table of origin for a particular field...
I was wondering if I can look at the same information on the system.
I appreciate your replies ..
Thanks,
Rishi.

Rishi,
we can know get the tables in different ways, the best way and easy way to search the tables is HELP.SAP.COM as you said. you can use communication structure, ST05, SM50.
All the best.
Regards,
Nagesh Ganisetti.

Problem in Add/Delete fields in Extract Structure.

Hi All,
When I want to delete some fields from the extract structure it gives me " " error.
Steps:
1. In R/3, T-Code LBWE -> Browse till DS ( ex: 2LIS_02_ITM)
2. Inactive the DS by clicking on 'Active' under Update column
3. Click on 'Maintenance' link under Structure column.
4. Remove a field MCEKKO-KUNNR from left side to right side of the window.
5. Click on continue button.
It gives the below error while generating the extract structure.
"MC03BF0" must be a flat structure. You can not use internal tables, strings,references, or structures as components.-
Plz help how to handle this error ? The same error msg is displayed if I want to add few fields to the structure.
Thanks in Adv

refer steps here:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0af763b-066e-2910-a784-dc6731660f46

Adding a new field in extract structure

Want to include New field in the Extract Structure in the Standard Extractor.
Please let me know what are the steps are needed to bring the data for that field in the cube level.
Thanks
Taj

Hi ,
if the data soource is belongs to LO extraction
Option 1- Enhance in LBWE
1. check in LBWE- Maintenance -> check if your required field is available in pool (right hand side).
2. If it is available then send it to left hand side.
3. Save and you will find the new field as part of your extract structure.
4. In LBWE go to datasource maintenance and uncheck the Hide check box for newly added fields and Save the data source.
5. No need to write user exit code for these fields.
after this replicate the data source
and activate the transfer rules using RS_TRANSTRU_ACTIVATE_ALL
Hope you are clear now!!!!!!!!
Cheers,
swapna.G

Urgent...... how to select few fields, from database table, (dynamic ita.)

Dear all experts,
I am able to populate all fields data from database table, using dynamic table creation.
eg,
SELECT *    FROM (w_tabname)    INTO    TABLE <t_itab>.
where w_tabname is the table name given by the user, and t_itab is field symbol.
but some requirement is like that i need to pick up only few fields, <b>which user will give at the runtime.</b>
<b>I can</b> take those fields from file into any internal table,
but the problem is that instead of <b>select *</b>, i need to put selected the fields given by user.
i have tried with field symbol, it is not working (as per my knowledge.)
do i need to create any structures dynamically ?
Can anybody please help in this regards ?
Your help will be surely rewarded with points.
Waiting for reply..
Regards
Vinay

Hi Vinay ,
Adding to the below code , you can use some more fields in the select stmt as below:-
REPORT ychatest.
PARAMETERS : p_field1 LIKE dd03l-fieldname,
                         P_field2 LIKE dd03l-fieldname,
                         p_table LIKE dd03l-tabname.
FIELD-SYMBOLS : <fs> TYPE STANDARD TABLE.
SELECT (p_field1) (p_field2) ( FROM (p_table) INTO TABLE <fs>.
Now p_field1 & p_field2 belong to the same table since you have give the user to enter only one table name.
This should work fine.
please try & let me know .
Thanks & Regards,
Daniel

How to uncheck the hide field in extract structure.

Hello All,
I have enhanced (Appended) a field ZZVATREC to a generic data source created for billing data(A View). This field is as hide field in the extract structure.I am able to unhide the field in change mode but when saving an error is comming like still errors in OLTP source system.
This field is I want to populate by coding and done proper coding also.
I have tried with Roosfield table. but I did am unable to see my appended field in roosfield table for the datasource.
In Rsa3 this field is populated.
Could anyone help me to solve this issue.
Regards

Hi Nivas,
The probable reason could be that the feild being appended is either a quantiy or currency feild and hence the definition of the append is not complete.
This requires to mention the currency or unit refernce and then would you be able to unhide.
There are amny posts for this topic in this forum.
Try searchin it, if you have any difficulty making hte change.
Naveen.A

Enhancing the extract structure of Datasource 0CO_OM_CCA_9

Hi,
My requirement goes as, we have a cube already getting populated with the data of 0CO_OM_CCA_9.
Now I have a accounting doc. available. My issue is we need a corresponding COPA doc.and its customer and produt for this accounting doc.
My Functional guy says, we can get the corresponding copadoc. and its details from the table CE10010. So now I need to add to fields to my stnd. extract structure and populate these 2. I know how to add them to the structure. My issue is all about populating them.
I see in RSA2 , that the extractor is a FM, which provides no exit within .
As far as my knowledge goes, is it sufficient if I write some code in the CMOD to fetch data from CE10010 and then pass it on to the extract structure, or do we have any thing else to be done to populate them.
Thanks in advance,
Sudha

Hi
Enhancing Extract structure can be achieved through the coding (cmod).
Or else you can even go for the Generic Data Source to combine both the tables.
Hope it helps

Selecting desired fields from extract structure to datasource in CRM

Similar Messages

Maybe you are looking for