Selection screen printing

Hi
I have an urgent requirement.I have to enter PO no and PO date in Parameters option. I also have a sapscript window called POwindow. Whatever I enter in the selection screen without any data selections ,it should be directly displayed in the window..How do i do it? Should i use a write form with text element or is there any other way ?
Thanks in advance
Swarna.S

yeah , thru text elements u can directly pass there values.
regards
prabhu

Similar Messages

How to Print Selection-Screen along with ALV Report output

Hi,
I have a requirement wherein i need to also print the Selection Screen of a report when I print the ALV report output.
Basically i need to print the ALV output along with selection screen.
Could you plz suggest me the way.
Regards,
Nitin

Hi,
My selection Screen is a very big one. It contains around 30 select-options.
So is their any standard method in which you can choose whether you want to take the output printout with or without Selection screen.
Regards,
Nitin

Print Selection Screen Parameters in ALV report only once

Does anyone know how to print the selection screen within a ALV report.
I've tried everything. I have the code to capture the selection parameters into a internal table. I can use top_of_page but I only want it printed once.

Hi,
If you have captured the selection screen entries in an internal table, then you could display it once by using the BLOCK LIST ALV.
Check the function module.
REUSE_ALV_BLOCK_LIST_DISPLAY
Using this function module more than 1 alv could be display in the report.
In our case ..there will be two alvs ...one for the selection screen n other for the main report output.
Check the following example on the block List ALV....
<b>BALVBT01</b>.
Regards,
Vara

How to Display my Form in the selection screen.(without print format)

Hi all,
I did one gate pass form and i want to view the form in my selection screen or output screen(just in monitor) as a display by giving one Z-code.
i.e, we can view the form thru Print preview...the same preview, i want to display after i give my parameter in the selection screen.
For example.ZGPOUT if i enter as a t-code.
it should ask my Gate Pass number in the Selection screen...if its right then my Form will come out to the display screen. (instead of going by Print method).,
Pls post ur comment and reply me with examples,if possible.
thanks & regards
sankar.

Hi Prasad,
Pls refer the below link.
<< Moderator message - Point begging removed >>
http://wiki.sdn.sap.com/wiki/display/Snippets/Displayimagesontheselection-screen
Thanks
Arjun
Edited by: Rob Burbank on Aug 17, 2011 2:24 PM

How to print the selection screen variant as a report header

I want to print the variant selected on the selection screen as a report header in the report painter.....Kindly help....The variant selected prior to generating the report painter output must be displayed on the final output screen as the header on the screen...

Hi
Here you've to use 'Z_HEADER_FOOTER' function module at TOP-OF-PAGE
Just pass parameters for report_name                 as repid
                                          show_select_options as 'Y'
                                          show_parameters       as 'Y'
                                          line_size                       as you wish
                                          action                           as 'X'
Hope this fulfills your requirement
Thanks
Suren

Adding customer field to selection screen of RFKORD11 - Customer Statement Printing Program:

Hello,
We are required to add an important customer field to selection screen of customer
statement printing program: RFKORD11 for our South African branch.
Please advise us regarding this matter,
is there a proper user-exit or a repair is needed?
Kind Regards.

Enhancement
text
F050S001
FIDCMT, FIDCC1,
FIDCC2: Edit user-defined IDoc segment
F050S002
FIDCC1: Change
IDoc/do not send
F050S003
FIDCC2: Change
IDoc/do not send
F050S004
FIDCMT, FIDCC1,
FIDCC2: Change outbound IDoc/do not send
F050S005
FIDCMT, FIDCC1,
FIDCC2 Inbound IDoc: Change FI document
F050S006
FI Outgoing IDoc:
Reset Clearing in FI Document
F050S007
FIDCCH Outbound:
Influence on IDoc for Document Change
F180A001
Balance Sheet
Adjustment
FARC0001
Enhancements within
archiving (FI)
FARC0002
Additional Checks for
Archiving MM Vendor Master Data
FEDI0001
Function exits for
EDI in FI
FICT0001
Exits for
inter-company transactions
RFAVIS01
Customer Exit for
Changing Payment Advice Segment Text
RFBVX001
Enhancement for bank
directory transfer (Austria)
RFEPOS00
Line item display:
Checking of selection conditions
SAPLBANK
User exit: Bank data
SAPLF040
WF: Preliminary
posting (authorized for release)
SAPLF051
Workflow for FI
(pre-capture, release for payment)
SAPLFCPD
One-time account data
or different payee in booking
SAPLSSRV
User exit: Bank
account numbers
RFKORIEX
Automatic
correspondence
please check which one is better .

Report OutPut directly to the printer by selecting in the selection screen

Hi Guys,
Can any one help,
How to give Report output (ALV report ) directly to the printer by selecting the printer name in the selection screen .
Sap Version is ECC 6.0.
Thanks In advance
praveen k

hi,
u can do it using submit statement.
SUBMIT TO SAP-SPOOL
Basic form
SUBMIT rep ... TO SAP-SPOOL.
Extras:
1.... DESTINATION dest         ... COPIES cop
        ... LIST NAME name
        ... LIST DATASET dsn
        ... COVER TEXT text
        ... LIST AUTHORITY auth
        ... IMMEDIATELY flag
        ... KEEP IN SPOOL flag
        ... NEW LIST IDENTIFICATION flag
        ... DATASET EXPIRATION days
        ... LINE-COUNT lin
        ... LINE-SIZE col
        ... LAYOUT layout
        ... SAP COVER PAGE mode
        ... COVER PAGE flag
        ... RECEIVER rec
        ... DEPARTMENT dep
        ... ARCHIVE MODE armode
        ... ARCHIVE PARAMETERS arparams
        ... WITHOUT SPOOL DYNPRO
2. ... SPOOL PARAMETERS params
         ... ARCHIVE PARAMETERS arparams
         ... WITHOUT SPOOL DYNPRO
3. ... Further parameters (for passing variants)
        are described in the documentation for SUBMIT
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See Missing print parameters with SUBMIT.
Effect
Calls the report rep with list output to the SAP spool database.
Additions
... DESTINATION dest(output device)
... COPIES cop(number of copies)
... LIST NAME name(name of list)
... LIST DATASET dsn(name of spool dataset)
... COVER TEXT text(title of spool request)
... LIST AUTHORITY auth(authorization for display)
... IMMEDIATELY flag(print immediately ?)
... KEEP IN SPOOL flag(keep list after print ?)
... NEW LIST IDENTIFICATION flag(new spool request ?)
... DATASET EXPIRATION days(number of days list
retained)
... LINE-COUNT lin ( lin lines per page)
... LINE-SIZE col(col columns per line)
... LAYOUT layout(print format)
... SAP COVER PAGE mode(SAP cover sheet ?)
... COVER PAGE flag(selection cover sheet ?)
... RECEIVER rec(SAP user name of
recipient)
... DEPARTMENT dep(name of department)
... ARCHIVE MODE armode(archiving mode)
... ARCHIVE PARAMETERS arparams(structure with archiving
parameters)
... WITHOUT SPOOL DYNPRO(skip print control screen)
With the parameters IMMEDIATELY, KEEP IN SPOOL, NEW LIST IDENTIFICATION and COVER TEXT, flag must be a literal or character field with the length 1. If flag is blank, the parameter is switched off, but any other character switches the parameter on. You can also omit any of the sub-options of PRINT ON. mode with SAP COVER PAGE can accept the values ' ', 'X' and 'D'. These values have the following meaning:
' ' : Do not output cover sheet
'X' : Output cover sheet
'D' : Cover sheet output according to printer setting
armode with ARCHIVE MODE can accept the values '1', '2' and '3'. These values have the following meaning:
'1' : Print only
'2' : Archive only
'3' : Print and archive
arparams with ARCHIVE PARAMETERS must have the same structure as ARC_PARAMS. This parameter should only be processed with the function module GET_PRINT_PARAMETERS.
Effect
Output is to the SAP spool database with the specified parameters. If you omit one of the parameters, the system uses a default value. Before output to the spool, you normally see a screen where you can enter and/or modify the spool parameters. However, you can suppress this screen with the following statement:
... TO SAP-SPOOL WITHOUT SPOOL DYNPRO
You could use this option if all the spool parameters have already been set!
reward points if hlpful.
Note
When specifying the LINE-SIZE, you should not give any value > 132 because most printers cannot print wider lists.
Addition 2
... SPOOL PARAMETERS params(structure with print
parameters)
... ARCHIVE PARAMETERS arparams(Structure with archive
parameters)
... WITHOUT SPOOL DYNPRO(skip print parameters
screen)
Effect
Output is to the SAP spool database with the specified parameters. The print parameters are passed by the field string params which must have the structure of PRI_PARAMS. The field string can be filled and modified with the function module GET_PRINT_PARAMETERS. The specification arparams with ARCHIVE PARAMETERS must have the structure of ARC_PARAMS. This parameter should only be processed with the function module GET_PRINT_PARAMETERS. Before output to the spool, you normally see a screen where you can enter and/or modify the spool parameters. However, you can suppress this screen with the following statement:
... WITHOUT SPOOL DYNPRO
Example
Without archiving
DATA: PARAMS LIKE PRI_PARAMS,
      DAYS(1) TYPE N VALUE 2,
      COUNT(3) TYPE N VALUE 1,
      VALID    TYPE C.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING DESTINATION           = 'LT50'
            COPIES                = COUNT
            LIST_NAME             = 'TEST'
            LIST_TEXT             = 'SUBMIT ... TO SAP-SPOOL'
            IMMEDIATELY           = 'X'
            RELEASE               = 'X'
            NEW_LIST_ID           = 'X'
            EXPIRATION            = DAYS
            LINE_SIZE             = 79
            LINE_COUNT            = 23
            LAYOUT                = 'X_PAPER'
            SAP_COVER_PAGE        = 'X'
            COVER_PAGE            = 'X'
            RECEIVER              = 'SAP*'
            DEPARTMENT            = 'System'
            NO_DIALOG             = ' '
IMPORTING OUT_PARAMETERS        = PARAMS
            VALID                 = VALID.
IF VALID <> SPACE.
SUBMIT RSTEST00 TO SAP-SPOOL
    SPOOL PARAMETERS PARAMS
    WITHOUT SPOOL DYNPRO.
ENDIF.
Example
With archiving
DATA: PARAMS   LIKE PRI_PARAMS,
      ARPARAMS LIKE ARC_PARAMS,
      DAYS(1) TYPE N VALUE 2,
      COUNT(3) TYPE N VALUE 1,
      VALID    TYPE C.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING DESTINATION            = 'LT50'
            COPIES                 = COUNT
            LIST_NAME              = 'TEST'
            LIST_TEXT              = 'SUBMIT ... TO SAP-SPOOL'
            IMMEDIATELY            = 'X'
            RELEASE                = 'X'
            NEW_LIST_ID            = 'X'
            EXPIRATION             = DAYS
            LINE_SIZE              = 79
            LINE_COUNT             = 23
            LAYOUT                 = 'X_PAPER'
            SAP_COVER_PAGE         = 'X'
            COVER_PAGE             = 'X'
            RECEIVER               = 'SAP*'
            DEPARTMENT             = 'System'
            SAP_OBJECT             = 'RS'
            AR_OBJECT              = 'TEST'
            ARCHIVE_ID             = 'XX'
            ARCHIVE_INFO           = 'III'
            ARCHIVE_TEXT           = 'Description'
            NO_DIALOG              = ' '
IMPORTING OUT_PARAMETERS         = PARAMS
            OUT_ARCHIVE_PARAMETERS = ARPARAMS
            VALID                  = VALID.
IF VALID <> SPACE.
SUBMIT RSTEST00 TO SAP-SPOOL
    SPOOL PARAMETERS PARAMS
    ARCHIVE PARAMETERS ARPARAMS
    WITHOUT SPOOL DYNPRO.
ENDIF.

How to print data of selection screen

hi plz tell me how to print that data in smartforms which the user enters in the selection screen...........

Use FM RS_COVERPAGE_SELECTIONS
    CALL FUNCTION 'RS_COVERPAGE_SELECTIONS'
         EXPORTING
              REPORT            = L_REPORTIDENTIFICATION
              VARIANT           = SY-SLSET
              NO_IMPORT         = 'X'                       "07/04/98
         TABLES
              INFOTAB           = T_INFOSELECT
         EXCEPTIONS
              ERROR_MESSAGE     = 1
              VARIANT_NOT_FOUND = 3
              OTHERS            = 2.

Printer Selection on Selection-Screen

Hi Guys,
                In my selection screen I want a option to select the Printer to which I want to print my output.
In my selection screen I have a push button with name some Print.
When I click this my logic will run and Print the output to where I have selected my printer.
My requirement is:-
1) How can I put a selection for Printer in selection screen.
2) And how should I make the output to print immedialtely when I press my Push Button from the selection Screen.
Thanks in Advance,
Prasad.

TABLES: sscrfields.
PARAMETER : s_pri TYPE tsp01_sp0r-rqdestl.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN PUSHBUTTON 10(10) push USER-COMMAND clic.
SELECTION-SCREEN END OF LINE.
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
      EXPORTING
        IMMEDIATELY            = ' '
        MODE                   = 'BATCH'
        NO_DIALOG              = 'X'
        RELEASE                = 'X'
        NEW_LIST_ID            = 'X'
        LINE_SIZE              = SY-LINSZ
        LIST_NAME              = 'NAME'
        LIST_TEXT              = 'Text name'
      IMPORTING
        OUT_PARAMETERS         = PARAMS
        VALID                  = VALID
      EXCEPTIONS
        ARCHIVE_INFO_NOT_FOUND = 1
        INVALID_PRINT_PARAMS   = 2
        INVALID_ARCHIVE_PARAMS = 3
        OTHERS                 = 4.

Printing Selection-Screen while printing ALV Grid output display

Hi,
I have a requirement wherein I want to print the Selection Screen also while printing the output in simple ALV grid Display.
Currently when I print the ALV output report, only the header and the Body of the ALV is getting printed. But the requirement is that I also want to print Selection screen along with this.
If anyone has faced a similar situation, plz let me know what needs to be done in order to print the selection screen also while printing the ALV report output.
Rgds,
Nitin

Hi,
You can use given function module to print your
selection screen
RS_REFRESH_FROM_SELECTOPTIONS
>This will get Current contents of selection screen
RS_LIST_SELECTION_TABLE
>This will Generates list according to values in selection table(RSPARAMS)
Sample
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
       EXPORTING
            curr_report     = p_repid
       TABLES
            selection_table = it_int_tab
       EXCEPTIONS
            not_found       = 1
            no_report       = 2
            OTHERS          = 3.
IF sy-subrc EQ 0.
    WRITE:1 'Selection Criteria'(i19),
         /1 sy-uline(18),
         /1 'Variant Name'(i21),
         23 sy-slset.
*-- This function module lists the Selection Screen contents
    CALL FUNCTION 'RS_LIST_SELECTION_TABLE'
         EXPORTING
              report        = p_repid
              seltext       = 'X'
              newpage       = space
         TABLES
              sel_tab       = it_int_tab
         EXCEPTIONS
              sel_tab_empty = 1
              OTHERS        = 2.
Mark all helpful answers

How to put e-mail adress in the print info. selection screen i smartforms?

Hi all,
Is it possible to have e-mail adress sent to smartform with the input parameters e.g. output_options or some other, so that the e-mail adress appears in the selection screen containing printout info such as output device, page selection, print imm.?
Where should the e-mail adress be placed in the input info to smartform then?
Thanks in advance for all the helpul answers!
BR,
Armin

THANKS

Printer option in selection screen (Input Parameter)

Hi All,
I want to give printer option in selection screen.
Please do needful help.
Regards.

Hi,
in the PF-STATUS if u enable the Printer Icon on Application Tool Bar and in the PAI Event in the
User Command Module get the FCODE and apply the following FM ALINK_PRINT_FRONTEND
Hope this works ....
Best of luck!!
Thanks
Ravi

Printer selection on selection screen to appear also in background sertting

I have been asked to fix a program
Fault =
There is a printer selection on the selection screen which is filled perfectly well from its help process.
When the user chooses "Execute in bacground" this printer selection is not automatically carried into the printer for background processing.
Question how to do this?
Is it simply a case of calling dunction "get_print_parameters" and exporting the selected printer from the input parameter in the "destination" parameter?
Cheers,
Ross

Hi ,
Go through the below link .
Link:[Get_Print_Parameters|http://help.sap.com/saphelp_470/helpdata/en/9f/dba56d35c111d1829f0000e829fbfe/content.htm].
Regards,
Maruthi.

Specify printer for payment summary, or select screen output

Hi All,
I have scheduled a Job using F110 tcode...with Run ID and identification...the job is continously running without any end...when i cancel the job..in job log entries i got "Specify printer for payment summary, or select screen output
Message no. BFIBL02 615" ...what could be the reason behind this..do i need to specify printer any where??
Kindly help

Hi
tru to check the variant you're using for the report to print the payment advises or the list of payment
Here you need to indicate the printer
Max

Using Smartform after preview print with a selection screen

Hi experts,
     I am facing with some smartform printing problem.
    Here is the problem:
    We develop an add_on program for printing some FI report and we use F:Front end Printing in SPAD Access Method.
    The problem that we faced is: After enter the TCODE, we select preview into the smartform window.( Display is all right) At this window, when we click Print Icon, the output request directly sent to the printer and the page printed out without giving a selection window for selecting Printers and printing page range (Like standard print configuration).
    What we want is that after displaying the FI report in smartform, we could select the print page range and printers in user's PC.
    Appreciate for your valuable advice.
BR,
Derek Yang

Hi,
You have to set PREVIEW = 'X', before you see print preview.
Try this way
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname = 'ZTEST_SMARTFORM'
    IMPORTING
      fm_name = fm_name.
DATA:ssfctrlop TYPE ssfctrlop.
ssfctrlop-preview = 'X'. "Needs to be set this. It shows dialog window to set print parameters
CALL FUNCTION fm_name
    EXPORTING
      control_parameters = ssfctrlop
    TABLES
      it_nfal            = it_nfal.
Thanks
Venkat.O

Selection screen printing

Similar Messages

Maybe you are looking for