Printer selection on selection screen to appear also in background sertting

I have been asked to fix a program
Fault =
There is a printer selection on the selection screen which is filled perfectly well from its help process.
When the user chooses "Execute in bacground" this printer selection is not automatically carried into the printer for background processing.
Question how to do this?
Is it simply a case of calling dunction "get_print_parameters" and exporting the selected printer from the input parameter in the "destination" parameter?
Cheers,
Ross

Hi ,
Go through the below link .
Link:[Get_Print_Parameters|http://help.sap.com/saphelp_470/helpdata/en/9f/dba56d35c111d1829f0000e829fbfe/content.htm].
Regards,
Maruthi.

Similar Messages

Printer option in selection screen (Input Parameter)

Hi All,
I want to give printer option in selection screen.
Please do needful help.
Regards.

Hi,
in the PF-STATUS if u enable the Printer Icon on Application Tool Bar and in the PAI Event in the
User Command Module get the FCODE and apply the following FM ALINK_PRINT_FRONTEND
Hope this works ....
Best of luck!!
Thanks
Ravi

Why is the Boot Disc Selection screen always appearing?

WIth a bootcamp partition on an iMac booting while holding down the Option key will cause the boot disk selection screen to appear, but suddenly I'm getting the boot disk selection screen even WITHOUT holding down the Option key. Why?

Well it might take a little longer since POST (power-on self test) needs to check more memory.
But try doing a smc and pram reset and see if that helps.

Is it possible to print a document exactly as it appears on the screen?

Like the topic question asks, is it possible to print a document exactly as it appears on the screen? I'm fairly new to indesign and I designed my company's manual recently, taking us away from doing so in Word. I fear I may have made a very amateurish mistake and am dreading having to go back and reposition everything. Some of the problem can be alleviated if I can find a way to print the document exactly as it appears on my monitor or when I export the file to PDF.
What's happening is the page numbering and other items I set up outside of the bleed area (I think that's what it's called...the red box that appears in each document) are refusing to print properly. I want the entire right hand corner of the page to be taken up. Currently, only part of the image is printing. If I choose "scale to fit", then the entire image prints, but it doesn't take up the entire right hand corner. Instead, the graphich repositions itself about an inch away from the edge and bottom of the document.
Failing that, is there a blanket way to scale all items in indesign?

In regards to the other question I asked though, is it possible to scale all the items on a page by a set amount? Say for instance I have the font too large on all of the pages in the document and the images are also a little oversized, is ther some way I can scale all of the images down a certain percentage without having to go into each item individually?
Well, kinda. If you select everything on your page at once (or if they're already grouped) then you can hold down Control, Shift, and Alt while grabbing a corner to resize and it'll maintain all of the ratios, including scaling the font size. You'd only be able to scale one page or spread at a time, but you could do it that way. Alternately, you can place your InDesign document into another InDesign document, where the source InDesign doc will be displayed as an image in the target doc. So, you could scale each page just like an image.
However, I'm reluctant to advise that you do that - mostly because I don't understand what you're doing. In my understanding, everything outside of the crop marks is literally going to wiind up on the cutting room floor, so the fact that you have content like page numbers in your bleed makes no sense to me. Is it intended for the press operator who's going to be doing the cutting? We can answer your questions, but honestly I think you should describe what you're trying to achieve in the end with a bit more detail, otherwise the forums regulars will answer your questions at face value and maybe help you, or maybe just help you dig a deeper hole for yourself without realizing it.

Print preview screen always appears in IW38 while printing order.

Hi Experts,
I have a user who always gets a print preview screen while printing orders from orders list page in IW38 T-Code.
Now we have tried to set his printer as default in SU3 T-Code,
Also we have selected the Print Immediately Option,
In addition to this, we have unchecked the Print Dialog Box in the IW32 for thisuser.
Now while testing we ourselves are not getting any print preview screen,
However the user is getting the same.
Can anyone please explain why he is always getting the print preview prompt.
This might be a little out of PP/PM domain, but please help if possible.
Thanks
Adarsh

Hi,
You can use given function module to print your
selection screen
RS_REFRESH_FROM_SELECTOPTIONS
>This will get Current contents of selection screen
RS_LIST_SELECTION_TABLE
>This will Generates list according to values in selection table(RSPARAMS)
Sample
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
       EXPORTING
            curr_report     = p_repid
       TABLES
            selection_table = it_int_tab
       EXCEPTIONS
            not_found       = 1
            no_report       = 2
            OTHERS          = 3.
IF sy-subrc EQ 0.
    WRITE:1 'Selection Criteria'(i19),
         /1 sy-uline(18),
         /1 'Variant Name'(i21),
         23 sy-slset.
*-- This function module lists the Selection Screen contents
    CALL FUNCTION 'RS_LIST_SELECTION_TABLE'
         EXPORTING
              report        = p_repid
              seltext       = 'X'
              newpage       = space
         TABLES
              sel_tab       = it_int_tab
         EXCEPTIONS
              sel_tab_empty = 1
              OTHERS        = 2.
Mark all helpful answers

HT1363 after pressing Menu and Select, when the Apple sign appears, I immediately press select and play/pause, but again the red X sign appears. so it does not go to Disk Mode. Has anyone had this issue? I would be grateful if you could tell me what to do

The red X has appeared in my Ipod Classic Screen. Apple support tells me that I need to first put it manually on disk mode. to put it on disk mode I ought to press menu and select buton togeher, when the apple sign shows up, hold select button and play together.
After pressing Menu and Select, when the Apple sign appears, I immediately press select and play/pause, but again the red X sign appears. so it does not go to Disk Mode. Has anyone had this issue? I would be grateful if you could tell me what to do.

Thank you everyone for the replies. It defiantly helped point me in the right direction. With any luck, I will have my replacement phone sometime tomorrow.
I was able to call the iPhone support line this morning. The Apple rep stayed on the line with me for about an hour until he was sure the new phone would ship out. For $199 plus $29 for expedited handling I was able to get the replacement ordered with overnight shipping. Since the replacement doesn’t involve ATT&T I have no reason to suspect any further delays. Kudos to the Apple rep that helped me straighten out this mess.
It’s a shame that AT&T cares so little for their existing customers. Not only did they try to sell me the same phone for $499, they outright refused to help me. They also lied to me on numerous occasions and strung me along for close to three weeks for something that only took an hour to complete with the Apple rep.
I filed a formal complaint against AT&T through the Better Business Burrow as well as requested a review of our cooperate contract with AT&T. Our company currently has over 3000 phones with AT&T and there contract comes up for bid the end of our fiscal year (this October). We will be giving it heavy consideration before we consider renewing their contract.
I doubt that any of that will matter to a company that cares so little about their customers, but you never know.
Thanks again for all your help. I would probably still be trying to get my replacement for the next few months if it wasn’t for your suggestions.
-Niel

I can not print only a selected part of a page

I have reset the print.print_printer and still can't print only the selected part of a page. I highlight what I want to print and use control P to get to the printer setup. Then I click the selection button and then OK. The preview screen shows what would print but the page has blank space above what was selected. This has only started to happen since the upgrade to FF 11.0. I have tried the same operation using IE and it works fine. please, is there a fix for this??

Hi jweigh,
This is a known bug. You should take a look at this thread:
https://support.mozilla.org/en-US/questions/923294
See the last post by Cww.
Hopefully this helps!

I cannot print just a selection of a page, what can I do?

I have seen that other people have asked this question also, but none of the replies on the forum are satisfactory. They all say it is not a good thing what you have done with the print option. I want to print a simple recipe, maybe half a page, I go to print and cannot select the option to print just the selection. It shows 7 pages to print! What a waste of time, paper, and ink!!!
The only option people seem to have found is to copy the selection and paste it in a word document. Then you end up with a lot of junk in word that is not needed. This is also time consuming.
My old version of foxfire didn't have this problem. Please fix this issue or I will be forced to switch to another browser, which I don't want to do as foxfire still has the least crashes of any browser I have used.

Simple answer is - '''don't use the Print button when you want to print a selection'''.
# Select the text that you want to print.
# Use '''{ Ctrl + P }''' to open the "native print dialog".
# 'tick' '''Selection''' under Print Range
# Hit the Print button in that dialog box to print that "selection".

My Photoshop CS 5 has some strange actions when I copy a portion of a photo using the clone stamp to transfer to another part of the image. It carries the entire layer (not just the stamps selection) across the screen and I cannot place it where I need t

My Photoshop CS 5 has some strange actions when I copy a portion of a photo using the clone stamp to transfer to another part of the image. It carries the entire layer (not just the stamps selection) across the screen and I cannot place it where I need to. It appears as if I selected the entire layer on purpose (which I did not)
The below items appeared when I opened Photoshop CS 5:
“Photoshop has encountered a problem with the display driver and has temporarily disabled G & U enhancements. Check the video card malfunctions website for latest software. GPU enhancements can be enabled in the performance panel of preferences.”
(I believe this started after the automatically updated Windows was applied. It was coincident with the before mentioned problem . . . but I don’t really know if it had anything to do with it. )

For the Clone Stamp problem, check the Clone Source panel and Clipped is probably unchecked.
If so, check Clipped and see if that makes a difference.
(Window>Clone Source)
As to the video card problem:
Which version of windows are you using?
What is the make and model of your graphics card?
Do you know which update windows installed?

If I do not select F11 ( full screen ) a big part of the screen "falls" of the right hand side of my monitor and is not readable, I am not able to find the neccesary adjustments.

Question
If I do not select F11 ( full screen ) a big part of the screen "falls" of the right hand side of my monitor and is not readable, I am not able to find the neccesary adjustments.
Screen 2/3 blanco on the left side
With F11 all OK.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

I have an older iPod that no longer shows up in iTunes or appears to be charging. When I press the Menu and Select buttons, the Apple logo appears and then an icon of a battery with an exclamation point. Is it dead for good?

I have an older iPod that no longer shows up in iTunes or appears to be charging. When I press the Menu and Select buttons, the Apple logo appears and then an icon of a battery with an exclamation point. Is it dead for good?

If it is otherwise working, you can change the battery. If you want to do it yourself, you can buy the part on eBay and other online sources. Just make sure you know the type of iPod you have so that you get the right part.
http://support.apple.com/kb/HT1353
There are online guides, including the ones on this web site
http://www.ifixit.com/Device/iPod
(Note: Most replacement batteries come with plastic/nylon tools seen in the guides.)
You can also have a repair business do the work.
If it is just the battery, if you do a Reset (using the Menu and Select buttons) while it is connect to your computer, I think it should still be recognized by iTunes.

Bonjour for windows: "The printer you have selected is no longer available"

Whenever I go to try and set up sharing my imacs printer with wifes windows computer, the bonjour for windows app at first sees my two printers, but as I select them I then get a message stating that "the bonjour printer you have selected is no longer available. Please make sure the printer is powered on and plugged in." It of course is on, powered and plugged in, and receives print jobs from my mac. I have also configured printer sharing in OS X 10.6 to allow for "everyone" to print. Don't get any firewall messages either.
Same problem happens for me when I am trying to connect from windows running under Parallels on my ibook.
Has anyone run across this problem and can offer guidance? I'm running out of hair to pull out!
Thanks in advance,
"I'm a Mac, and I'm a PC... and we're trying to play nicely together." (mumble-mumble-grumble...)

Problem solved!! Somehow. After being in try everything and anything mode (remove/add printer, update drivers (again), shut down/restart, etc), I think I solved the problem my changing sharing permissions. I still couldn't print though. Kept getting the "printer cannot be contacted over the network" error message. After much searching and reading things I didn't really understand, I noticed I kept running across this statement that Windows 7 does not play well with DHCP and the printer should be assigned a static IP address. I found this forum item that tells simply how to do that: http://discussions.apple.com/thread.jspa?threadID=1725525. The big thing was that it had me add the printer as a local printer where I had been trying to add it as a network printer. I never would have thought to do that. Then you put in the Airport address and that's it. It worked!
This whole thing made it very clear why I moved from Windows to Mac. I should never have had to spend a whole day trying to get a network printer to print. Good luck to everyone having this issue.

Validation of materials entered in multiple selection in selection-screen

Hi,
How can I do the validation for all the materials entered in multiple selection in selection-screen?

What kind of validation do you need to do?
One of the easiest options is to select the materials to an internal table and then loop through it. Something like this:
SELECT-OPTIONS: SO_MATNR FOR MARA-MATNR.
AT SELECTION SCREEN.
SELECT MATNR FROM MARA
INTO TABLE I_MATNR
WHERE MATNR IN SO_MATNR.
LOOP AT I_MATNR.
" <do validations here>
ENDLOOP.
Here table I_MATNR has only one field MATNR.
But please be careful with this, because you might end up going through thousands of material numbers. You might want to limit the user's choices by making the field required and removing some other options. Also you can check number of records in I_MATNR and allow only, say, not more than 50 materials, thusly forcing the users to limit their selection criteria.
Naturally, other selection options may be added here.

Reset Select options in Screen

Hi,
I have a scenario where, i need to disable the select options and clear the visible contents in it.
Currently below is the logic implemented, the radio button is getting disabled and also cleared of selection.
Select option fields are getting disabled.
But the issue is, the Select options LOW and HIGH fields show the older values and are not getting reset.
Please share your thoughts.
PARAMETERS : r_pernr RADIOBUTTON GROUP g2 MODIF ID cs1.
SELECT-OPTIONS :   p_pernr FOR pa0001-pernr MODIF ID cs1.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF V_Flag NE 'X' AND
       screen-group1 = 'CS1'.
      r_pernr = space.
      p_pernr-low = space.
      p_pernr-high = space.
      screen-input = 0.
      MODIFY SCREEN.
   ENDIF.
ENDLOOP.

TABLES:PA0001.
DATA:LF_PERNR TYPE CHAR08.
PARAMETERS : R_PERNR RADIOBUTTON GROUP G2 MODIF ID CS1,
             R_2 RADIOBUTTON GROUP G2.
SELECT-OPTIONS : P_PERNR FOR LF_PERNR MODIF ID CS1.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    R_PERNR = SPACE.
    CLEAR P_PERNR[].
    SCREEN-INPUT = 0.
    MODIFY SCREEN.
ENDLOOP.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_PERNR-LOW.
PERFORM F4_HELP USING 'P_PERNR-LOW'.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_PERNR-HIGH.
PERFORM F4_HELP USING 'P_PERNR-HIGH'.
FORM F4_HELP USING PC_1.
TYPES:BEGIN OF TY,
      PERNR TYPE PA0001-PERNR,
      END OF TY.
DATA:IT TYPE TABLE OF TY.
SELECT PERNR INTO TABLE IT FROM PA0001 UP TO 10 rows.
CHECK IT[] IS NOT INITIAL.
DELETE ADJACENT DUPLICATES FROM IT.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      RETFIELD    = 'PERNR'
      DYNPPROG    = SY-CPROG
      DYNPNR      = SY-DYNNR
      DYNPROFIELD = PC_1
      VALUE_ORG       = 'S'
    TABLES
      VALUE_TAB   = IT[]
    EXCEPTIONS
      OTHERS      = 0.
ENDFORM.

RE: Code for error messages & for Multiple Selection at Selection screen

Dear Friends,
Following is the code to display PO created without Purchase Requisition Nos. Please help me with the correct code to display the error messages when PO No is entered with Purchase Requisition No & also a message should come when user enters some random or wrong PO NO.
                  Also, in the Selection-Screen I want PO NO, Purchase Org, Material, Plant & Date. So, please help with the code so that these options can also display the PO created without Purchase Requisition Nos.
Waiting for your valuable replies,
Suruchi.
The Code is attached herewith:
DATA: BEGIN OF itab OCCURS 0,
      ebeln TYPE ekko-ebeln,
      ebelp TYPE ekpo-ebelp,
      matnr TYPE ekpo-matnr,
      txz01 TYPE ekpo-txz01,
      menge TYPE ekpo-menge,
      meins TYPE ekpo-meins,
      banfn TYPE ekpo-banfn,
      END OF itab.
SELECT-OPTIONS: s_ebeln FOR itab-ebeln.
START-OF-SELECTION.
SELECT * INTO CORRESPONDING FIELDS OF TABLE itab
         FROM ekko
             INNER JOIN ekpo
                ON ekkoebeln = ekpoebeln
                         WHERE ekko~ebeln IN s_ebeln
                               AND ekpo~banfn = space.
WRITE:/ text-001,
          15 text-002,
          25 text-003,
          40 text-004,
          70 text-005,
          85 text-006.
ULINE.
LOOP AT itab.
    WRITE:/ itab-ebeln, 16 itab-ebelp, 25 itab-matnr,
            40 itab-txz01, 60 itab-menge, 88 itab-meins.
ENDLOOP.

select-options: s_ekorg for ekko-ekorg.
select-options: s_matnr for ekpo-matnr.
select-options: s_werks for ekpo-werks.
select-options: s_aedat for ekko-aedat.
Check the PO numbers here is not necessary because you are using a select-option(range), if something erroneous is typed, the program will simply not select it.
This would be a different story if you where using a parameter. Here you would do a check against EKKO in the AT SELECTION-SCREEN event.
at selection-screen.
select Single * from ekko
          where ebeln = p_ebeln.
if sy-subrc <> 0.
message E000(00).
Endif.
Regards,
Rich Heilman
Regards,
Rich Heilman

Printer selection on selection screen to appear also in background sertting

Similar Messages

Maybe you are looking for