SELECTION TABLE PASSING VALUES
I want to pass multiple values with submit statuement. Here I m passing a selection table but I also want to pass one more value.
SUBMIT zxx_xxx USING SELECTION-SCREEN 0501
WITH S_CUST IN gt_customer_range
Is there anyother way to pass an addition value along with this selection table
hi,
u can use like this
First declare with range iof like this it_rangemtart LIKE RANGE OF mara-mtart,
Then pass the values as shown below
*Material number
IF FL_MATNR IS NOT INITIAL AND FL_MATNR1 IS INITIAL.
CLEAR : wa_matnr,
it_rangematnr.
wa_matnr-sign = 'I'.
wa_matnr-option = 'EQ'.
wa_matnr-low = fl_matnr.
APPEND wa_matnr TO it_rangematnr.
ELSEIF fl_matnr IS NOT INITIAL AND
fl_matnr1 IS NOT INITIAL.
CLEAR : wa_matnr,
it_rangematnr.
wa_matnr-sign = 'I'.
wa_matnr-option = 'BT'.
wa_matnr-low = fl_matnr.
wa_matnr-high = fl_matnr1.
APPEND wa_matnr TO it_rangematnr.
ENDIF.
*Material decription
CLEAR : wa_maktx,
it_rangematkx.
wa_maktx-sign = 'I'.
wa_maktx-low = fl_makt1.
wa_maktx-high = fl_makt2.
IF fl_makt1 IS NOT INITIAL
AND fl_makt2 IS NOT INITIAL.
wa_maktx-option = 'BT'.
APPEND wa_maktx TO it_rangematkx.
ELSEIF fl_makt1 IS NOT INITIAL
AND fl_makt2 IS INITIAL.
wa_maktx-option = 'EQ'.
APPEND wa_maktx TO it_rangematkx.
ENDIF.
SUBMIT zlabmaterial
WITH s_mtart IN it_rangemtart
WITH s_matkl IN it_rangematkl
WITH s_matnr IN it_rangematnr
WITH s_maktx IN it_rangematkx
WITH p_print EQ fl_out
WITH p_copie EQ fl_copy
AND RETURN.
Similar Messages
-
Add selected table row value to PageFlowScope so I can access in taskflow
Hi all,
Running into a problem getting a value from a selected ADF table row to a taskflow that is displayed as an inline popup. Here's the scenario. I have a view which displays a table. When I click on an edit btn I display my taskflow as an inline popup. What I would like to do is take the currently selected table row, pull off lets say the row name value and pass it to my taskflow for display. I've tried settting this value inside a mbean when I click the edit btn using:
AdfFacesContext.getCurrentInstance().getPageFlowScope().put("editTargetNameSource", targetName);
String tmpClear = (String) AdfFacesContext.getCurrentInstance().getPageFlowScope().get("editTargetNameSource");Which seems to get set but when I attempt to grab this value using EL inside my taskflow jspx page it looks to not be set.
<af:outputLabel value="Selected Row" id="ol1"/><af:outputText value="#{pageFlowScope.editTargetNameSource}"It seems like pageFlowScope for my popup taskflow != pageFlowScope for the page my table lives in. I've tried setting this as a input page param but I have a feeling I'm missing something. I'd like to be able to set this value inside my bean when a user clicks the edit btn and then display this value in my taskflow popup.
Any help is appreciated,
-WraithThanks for the links Timo. I still must be missing something here. In the vids you linked it looked like he was using regions to pass params from main page to a taskflow; setting a param on child taskflow (causes param to be required when dragging into main page). So I think I understand I add an expected param to my taskflow which somehow will be set by my main page. The part I'm missing is from my main page how can I get the selected table row value and set it in the expected pageflowscope param that my taskflow is expecting?
I've tried several things:
1) Using managed bean associated with my main page; setting param inside the bean on main page btn click and then try accessing this mbean param (couldn't access this value as different pageflowscope I believe)
2) Programmatically setting PageFlowScope as I linked in previous post.
3) using setPropertyListener I can set a static value setting value in pageflowscope.start and then inside adfc.config for the task set start value to another value expected by the taskflow page. This seemed to work but I can't figure out how to do the programmatic version of this using the currently selected row and its value.
One who seems to be missing something,
-Wraith -
How to fire a query for every record in a table, pass values in a loop
Hi,
For each record in a table, I want to loop through each record and then fire a query by passing acct, product and date from this table to the where clause of the query. I would have to create a pl/sql block..The output of the query I want to spool from sql developer.
I need the exact syntax please for doing this.. since i am new to Oracle. Just the template will be enough. I will fill in the query.
Any help is appreciated as always..
Regards,
hena904385 wrote:
Hi,
For each record in a table, I want to loop through each record and then fire a query by passing acct, product and date from this table to the where clause of the query. I would have to create a pl/sql block..The output of the query I want to spool from sql developer.
I need the exact syntax please for doing this.. since i am new to Oracle. Just the template will be enough. I will fill in the query.
Any help is appreciated as always..
Regards,
henaHave you ever considered using a JOIN ? It does the same thing as looping through a table and applying that to the where clause of a select on a query, only much, much, much faster and without the need to write any code. SQL is a declarative language, so you specify what you want and not how to do it. It can be bit of a journey to change your thought process if you come from a procedural or object world, but once you get there it's a beautiful view. -
BI Input Selection Screen : Pass values
Hi,
I have a requirement where I have to show only those business partners who are assigned to a BP Role entered in another variable of the same selection screen.
If the role is Sold to party I have to show only those busness partners who are assigned to Sold to party.
Please also give me the reference of other threads if you come across any....!
Regards
JogaHi Joga,
I wud suggest you to create another query say B to generate the BP number giving input as Sold to Party and create one more variable in your existing say A and through replacement path and input as Query B in Query A.
General Tab of Variable
The Variable in Query A will have the following properties,
1)Processing by Replacement Path
2)Ref Char as the Tech Name of Query A.
In the Replacement Path tab
1)Replace varible with Qurey
2)Query =tech name of Query B
refer this one
https://www.sdn.sap.com/irj/scn/forums
Rgds
SVU123 -
Passing a table-field value in Crystal to a Store Procedure in SQL Server
I have been checking all over the interenet via searches and although some seem to come close to this, its still not what I want.
Essentially I need to pass value from Table-Field record (for each record read/selected) via a paramete to a Stored Procedure(SP) in SQL Server 2205/2008. I do NOT want to be prompted for a value for this parameter each time the report is run, simple pass the value in which will be used along with other select criteria to bring back one value for the report to use in a calcuation per record.
The value of the parameter is a date, but I understand it would be better to pass it in as a varchar(8) - 'YYYYMMDD' - and then reconvert it inside the SP, as follows:
In Crystal Reports 2008 SP3, I have a formula defined as,
trans_date = ToText ({F1ARS_STMT_WS_TRAN.TRANS_DATEI}, 'YYYYMMDD')
and essential just want to pass this to the SP below ... i.e. trans_date ---> @strTransDate
I then link the key fields [EXCH_RATE_TABLE_NAME] and [TRANS_CCY_CODE] to other tables in the Database Expert, and put [EXCH_RATE_AMT] on the report and use it to calculate what I want.
This works fine when the prompt comes up and I put in a proper date, but I don't what it to prompt, but simple pass the F1ARS_STMT_WS_TRAN.TRANS_DATEI in via the fornula/parameter and let teh SQL do the rest for each record selected..
CREATE PROCEDURE [dbo].sp_GET_EXCH_RATE_AMT (@strTransDate varchar(8)) --use format 'YYYYMMDD' to represent the date as a string.
-- Add the parameters for the stored procedure here
-- @TransDate datetime = now
AS
declare @TransDate datetime
set @TransDate = CONVERT(DATETIME, @strTransDate, 112)
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
-- Insert statements for procedure here
SELECT [EXCH_RATE_TABLE_NAME], [TRANS_CCY_CODE], [EXCH_RATE_AMT]
FROM [F1CCY_EXCH_RATE]
WHERE [MAJOR_CCY_CODE] = 'BBD'
AND [START_DATEI] =
SELECT MAX([START_DATEI])
FROM [F1CCY_EXCH_RATE]
WHERE [MAJOR_CCY_CODE] = 'BBD'
AND [START_DATEI] <= @TransDate
END
GO
GRANT EXECUTE ON sp_GET_EXCH_RATE_AMT TO PUBLIC
GO
Thanks for any help. Can't tell the headache this has caused my both literally and figuratively.Hello,
I moved your post to the Report Design forum. Lots of SQL help in here...
I believe the problem is due to you using a Parameterized Stored Procedure. The first thing CR has to do is connect to your DB source which requires the date parameter before it can run the query to add the date filter, it's the SP that is prompting for the parameter. Therefore the report has not run so it can't get the field value from the report until you fill in the info for the SP. Catch 22 problem.... Which came first, the Chicken or the Parameter....
The report will work as you have noted but I don't know of anyway to refresh unless parameter is filled in again....
Jason has a lot of great solutions when it comes to these dilemmas, Possibly using a Command Object may help but I believe you will still run into the same issue....
Only way I can think of is to not use a parameter in the SP and let CR do the filtering client side. Of course this means all data is coming back to the client PC as you are likely trying to find a work around for.
Thank you
Don -
Passing value to bind variable of another table from one table
hi,
I have a multi select table. When one row is selected from this table (no button is clicked, only selection is done), an attribute from that selected row (say userid) should be passed to the bind variable of another table and the corresponding details of that particular userid should be displayed in the other table. When more than one row is selected, the other table should display no rows.
My main problem is what code has to be written to pass value to bind variable and where it should be written.
Please give me a detailed explaination as soon as possible.
Thank you.Sorry, didnot add this. The table is multi select table.
-
How i pass table column value to string variable or return to java applete
Hi Master,
How do I pass a table column value into string variable. See my code below:
import java.sql.*;
public class Waheed {
public Waheed() {
public static void main (String args [])
String s = "9 23 45.4 56.7";
System.out.println ("going for connection");
// DriverManager.registerDriver (new oracle.jdbc.driver.OracleDriver());
try{
Class.forName("oracle.jdbc.driver.OracleDriver");
Connection conn =
DriverManager.getConnection("jdbc:oracle:thin:@fahim:1521:aamir","muhammad","mfa786");
Statement stmt = conn.createStatement();
ResultSet rset = stmt.executeQuery("select accid from accbal");
System.out.println ("going for connection");
while (rset.next())
s= rset.getString("accid"); this line give me error
System.out.println (rset.getString("accid"));
System.out.println (s);
catch(Exception e){
e.printStackTrace();
This line give me an error:
s= rset.getString("accid");
s is string variable
Plese give me an idea how I can pass accid in s variable.
Thanks.
AamirSee the code sample in the following thread (try using upeercase).
JDBC connection
Kuassi -
How to pass value from the Z Report to the selection screen of the std rep
Dear Experts,
i have developed a report and the values are maintained only in internal table based on some condition. When I execute the report, for example MM60, there is a material number field for multiple selection.
the report should call the standard transaction and pass the values from the internal table to the multiple selection- material number of the standard transaction.
the standard transaction should never get executed automatically. Only the value should get passed from internal table to the standard t code. Please help.
regards,
ShankarHai
Go through the following Documents
SUBMIT rep.
Additions
1. ... LINE-SIZE col
2. ... LINE-COUNT lin
3. ... TO SAP-SPOOL
4. ... VIA SELECTION-SCREEN
5. ... AND RETURN
6. ... EXPORTING LIST TO MEMORY
7. ... USER user VIA JOB job NUMBER n
8. ... Various additions for parameter transfer to rep
9. ... USING SELECTION-SETS OF PROGRAM prog
Effect
Calls the report rep . Leaves the active program and starts the new report rep .
Addition 1
... LINE-SIZE col
Effect
Prints the report with the line width col .
Addition 2
... LINE-COUNT lin
Effect
Prints the report with lin lines (per page).
Addition 4
... VIA SELECTION-SCREEN
Effect
Displays the selection screen for the user. In this case, the selection screen is redisplayed after return from the report list display - the user's entries are retained.
Addition 5
... AND RETURN
Effect
Returns to the calling transaction or program after the called program has been executed. SUBMIT ... AND RETURN creates a new internal mode .
Addition 6
... EXPORTING LIST TO MEMORY
Effect
Does not display the output list of the called report, but saves it in SAP memory and leaves the called report immediately. Since the calling program can read the list from memory and process it further, you need to use the addition ... AND RETURN . Also, since the called report cannot be requested for printing, the addition ... TO SAP-SPOOL is not allowed here. You can read the saved list from SAP memory with the function module 'LIST_FROM_MEMORY' and then (for example) store it in the database with EXPORT . You can process this list further with the function modules 'WRITE_LIST' , 'DISPLAY_LIST' ... of the function group "SLST" .
Addition 7
... USER user VIA JOB job NUMBER n
Effect
Schedules the specified report in the job specified by the job name job and the job number n . The job runs under the user name user and you can omit the addition USER user . The assignment of the job number occurs via the function module JOB_OPEN (see also the documentation for the function modules JOB_CLOSE and JOB_SUBMIT . This addition can only be used with the addition ...AND RETURN .
Note
When scheduling a report with the SUBMIT ... VIA JOB job NUMBER n statement, you should always use the addition ...TO SAP-SPOOL to pass print and/or archive parameters. Otherwise, default values are used to generate the list and this disturbs operations in a production environment.
Addition 9
... USING SELECTION-SETS OF PROGRAM prog
Effect
Uses variants of the program prog when executing the program rep .
Note
Important
The programs prog and rep must have the same SELECT-OPTIONS and PARAMETER s. Otherwise, variants of the program prog may be destroyed.
Note
When using this addition, the specified variant vari of the program prog is taken in USING SELECTION-SET vari . On the other hand, all variant-related actions on the selection screen of rep (Get , Save as variant , Display , Delete ) refer to the variants of prog .
Example
SUBMIT REPORT01
VIA SELECTION-SCREEN
USING SELECTION-SET 'VARIANT1'
USING SELECTION-SETS OF PROGRAM 'REPORT00'
AND RETURN.
Effect
Executes the program REPORT01 with the variant VARIANT1 of the program REPORT00 .
Note
Runtime errors
LOAD_PROGRAM_NOT_FOUND : The specified program was not found.
SUBMIT_WRONG_TYPE : The specified program is not a report.
SUBMIT_IMPORT_ONLY_PARAMETER : Only one value passed to a report parameter.
SUBMIT_WRONG_SIGN : Invalid value passed to a selection with the addition SIGN .
SUBMIT_IN_ITAB_ILL_STRUCTURE : Table passed to a selection with WITH sel IN itab had an unexpected structure.
Try with this Example
Data: listobject like abaplist occurs 1 with header line.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1 .
IF sy-subrc <> 0.
message ID '61' TYPE 'E' NUMBER '731'
with 'LIST_FROM_MEMORY'.
ENDIF.
Thanks & regards
Sreenivasulu P -
How to pass value to select-option parameter using SET PARAMETER Command
Hi,
Am passing values to selection-screen fields in report RV13A004 ( used in VK11, VK12 and VK13). using below statement but material number is select-option in this report. am able to pass MATERIAL FROM using SET PARAMETER ID, can i know how to pass values MATERIAL TO range in select-options fields using SET PARAMETER Command ??
Passing values to parameter id
set parameter id 'VKS' field kschl.
set parameter id 'VKO' field vkorg.
set parameter id 'VTW' field vtweg.
set parameter id 'KDA' field erdat.
set parameter id 'MAT' field matnr_from.
Change condition price.
call transaction 'VK12' and skip first screen.
Thanks in advance.
Regards,
Balamurugan.Hi,
instead of using set parameters and dden call transaction use this..........
submit RV13A004 WITH SELECTION-TABLE rspar
Effect
If you specify this addition, parameters and selection criteria on the selection screen are supplied from an internal table rspar. You must specify an internal table with the row type RSPARAMS for rspar. The structured data type RSPARAMS is defined in the ABAP Dictionary and has the following components, all of which are data type CHAR:
SELNAME (length 8),
KIND (length 1),
SIGN (length 1),
OPTION (length 2),
LOW (length 45),
HIGH (length 45).
To supply parameters and selection criteria for the selection screen with specific values, the lines in the internal table rspar must contain the following values:
SELNAME must contain the name of a parameter or selection criterion for the selection screen in block capitals
KIND must contain the type of selection screen component (P for parameters, S for selection criteria)
SIGN, OPTION, LOW, and HIGH must contain the values specified for the selection table columns that have the same names as the selection criteria; in the case of parameters, the value must be specified in LOW and all other components are ignored.
If the name of a selection criterion is repeated in rspar, this defines a selection table containing several lines and passes it on to the selection criterion. If parameter names occur several times, the last value is passed on to the parameter.
The contents of the parameters or selection tables for the current program can be entered in the table by the function module RS_REFRESH_FROM_SELECTOPTIONS.
Notes
In contrast to selection tables, the data types of the components LOW and HIGH in table rspar are always of type CHAR and are converted to the type of the parameter or selection criterion during transfer, if necessary.
When entering values, you must ensure that these are entered in the internal format of the ABAP values, and not in the output format of the screen display.
Cheers
Will. -
Value help for select options (pass the selected values to the select opt)
Hi everyone,
I created a custom value help for my select options.
It works fine, when the user clicks on the value help, my own view is displayed, and the user can select the required values:
lt_range_table =
wd_this->m_handler->create_range_table(
i_typename = 'ORGEH' ).
* add a new field to the selection
wd_this->m_handler->add_selection_field(
i_id = 'ORGEH'
i_value_help_id = 'MYSO'
i_value_help_type = IF_WD_VALUE_HELP_HANDLER=>CO_PREFIX_APPLDEV
it_result = lt_range_table
i_read_only = read_only ).
The problem is, how can I pass the values to the select option? When the user selects the values in my view, I have them in an internal table. But how can i pass these values to the select option? I suppose there is declared method for this... but which one?
Thanks
N.Sorry for the stupid question, but it seems I can't acces my attribute:
I create it in the component controller
NODE: 'APP_DATA'
Attribute: M_HANDLER TYPE IF_WD_SELECT_OPTIONS
Cardinality 1..1
Selection 1..1
Singleton = 'X'
I pass the values int he EDOINIT method of MAIN view:
* Get compnent controller API
lo_component = wd_comp_controller->wd_get_api( ).
lo_controller ?= lo_component.
* Get the controler context node
CALL METHOD LO_CONTROLLER->GET_CONTEXT
RECEIVING
CONTEXT = lo_context.
*Get the root node
lo_node = lo_context->root_node.
*Get the child node
lo_child = lo_node->get_child_node( 'APP_DATA' ).
ls_app_data-m_handler = wd_this->m_handler.
lo_child->bind_structure( ls_app_data ).
After this code I test it if the binding is correct:
DATA: ls_test TYPE wd_comp_controller->element_app_data.
CALL METHOD LO_CHILD->GET_STATIC_ATTRIBUTES
IMPORTING
STATIC_ATTRIBUTES = ls_test.
The lstest is correct_. It has the reference for the SelectOption
Now, in the SEL_TREE View:
* Get compnent controller API
lo_component = wd_comp_controller->wd_get_api( ).
lo_controller ?= lo_component.
* Get the controler context node
CALL METHOD LO_CONTROLLER->GET_CONTEXT
RECEIVING
CONTEXT = lo_context.
*Get the root node
lo_node = lo_context->root_node.
*Get the child node
lo_child = lo_node->get_child_node( 'APP_DATA' ).
*Get the data from the node
CALL METHOD LO_CHILD->GET_STATIC_ATTRIBUTES
IMPORTING
STATIC_ATTRIBUTES = ls_app_data.
wd_this->m_handler = ls_app_data-m_handler.
The ls_app_data-m_handler is INITIAL. There is no value in it.
What did I do wrongly?
Please help
Thanks
N. -
Passing selection table as parameter to function modules
i tried to pass a selection table as a parameter to a function module but there is a problem stating the eror the table length is different.
*& Report ZSFSELECT_OPTIONS_PGM
REPORT zsfselect_options_pgm.
TABLES zselect_options.
SELECT-OPTIONS sop FOR zselect_options-id.
DATA : fname(15) TYPE c.
*CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = fname
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME =
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
*IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
DATA lth(2) TYPE c.
DATA ty TYPE i.
DATA o TYPE i.
DATA l TYPE i.
DATA k TYPE c.
DESCRIBE FIELD sop-sign TYPE lth LENGTH ty IN CHARACTER MODE.
CALL FUNCTION fname
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
sf_sop =sop
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
in the smart form i have tried to pass the sp as the table.
i have created a program line node
:SELECT * FROM zselect_options INTO TABLE it_tab WHERE id IN sf_sop.Hi,
If i understand ur problem correctly u r trying to pass a select-option to Tables for a smartform function module. It gives an error & it correct.
If u understand the structure of a select option, it will have 4 fields in it & the structure will be
SIGN CHAR1
OPTION CHAR2
LOW Type Zfield
HIGH Type Zfield
But ur receiving Table paramter of the smnartform FM will be having only 1 field - Type Zfield
So this mismatch gives u an error.
Solution:
Case1:
Write code outsied th FM in ur program to get all the values & build an internal table & pass that to the FM.
Case2:
Define the Structure of table in the smartforms as tols earlier & then try passsig the Select option.
Thanks & Regards,
Bhargava -
Passing values to a select option through submit
hi all,
i am using the following code to submit report.
SUBMIT :rko7co88 USING SELECTION-SET 'ZTEST_PS'
WITH SELECTION-TABLE seltab
WITH perio = v_month
WITH gjahr = v_year
WITH vaart = c_1.
the table seltab is being populated as shown below.
LOOP AT i_aufnr INTO i_aufnr_wa.
seltab_wa-selname = 'AUFNR'.
seltab_wa-sign = 'I'.
seltab_wa-kind = 'S'.
seltab_wa-option = 'EQ'.
seltab_wa-low = i_aufnr_wa-aufnr.
APPEND seltab_wa TO seltab.
CLEAR seltab_wa.
ENDLOOP.
but when i run this program it gives a short dump saying program has excceded the maximum time permited.
the problem seems to be with passing table seltab to select option, because when i run the program witout that statemant "WITH SELECTION-TABLE seltab" . it works fine.
in seltab i have selected only open orders which r confirmed, when i run the program without passing seltab it takes all the orders and works fine but according to my requirement i have to run the program for only open orders.
pls suggest the way out.
thanks
pankaj sharmaHi pankaj,
1. I tried the same thing, and now its working fine.
2. I also used the extension of submit
<b> via selection-screen.</b>
to temporarily check what values are going in the screen.
3. just copy paste to get a taste of it.
4. Values 11111, 2222 will come in AUFNR.
5.
report abc.
DATA : SELTAB LIKE RSPARAMS OCCURS 0 WITH HEADER LINE.
SELTAB-SELNAME = 'AUFNR'.
SELTAB-KIND = 'S'.
SELTAB-SIGN = 'I'.
SELTAB-OPTION = 'EQ'.
SELTAB-LOW = '11111'.
APPEND SELTAB.
SELTAB-SELNAME = 'AUFNR'.
SELTAB-KIND = 'S'.
SELTAB-SIGN = 'I'.
SELTAB-OPTION = 'EQ'.
SELTAB-LOW = '222222'.
APPEND SELTAB.
submit RKO7CO88
WITH perio = '001'
WITH gjahr = '2006'
WITH vaart = '1'
WITH SELECTION-TABLE SELTAB
via selection-screen.
regards,
amit m. -
How to Pass Select-options Single values as Parameter value to Method ?
Hi Friends,
I need to pass select-options values(single values) for s_arbpl to the method "process_percent_planned". Now all single values are in internal table s_arbpl-low field. I need to pass this internal table(s_arbpl-low) values to the method where i will run query based on these single values.In my below code i am passing value through variable w_arbpl. I have defined this parameter in the method.But here only one value is passed to method. I want multiple single values (in s_arbpl-low) should be passed. Please let me know how to correct code.
Tables: crhd.
Data: ktext type auftext,
w_arbpl type arbpl.
select-options: s_arbpl for crhd-arbpl.
ktext = 'Test'
create object obj_plan.
call method obj_plan->process_percent_planned
exporting
ktext = ktext
w_arbpl = s_arbpl-low.
Thankshi ,
when you want to pass S_ARBPL AS PARAMETER IN SELEC OPTION
ARBPL SUCH AS
WIN002
WIN003
WIN004
WIN005
WIN006
WIN007
IN MULTIPLE SELECTION S_ARBPL
THEN
USE
Tables: crhd.
Data: ktext type auftext,
w_arbpl type arbpl.
select-options: s_arbpl for crhd-arbpl.
ktext = 'Test'
LOOP AT S_ARBPL .
create object obj_plan.
call method obj_plan->process_percent_planned
exporting
ktext = ktext
w_arbpl = s_arbpl-low.
ENDLOOP.
REGARDS
dEEPAK .
THEN SELECT THAT
call method obj_plan->process_percent_planned
exporting
ktext = ktext
w_arbpl = s_arbpl-low. -
APEX - passing values from LOV's or multi-select LOV's to another APEX form
I am new APEX development and I need to take the values from LOV's and multi-select LOV's and pass them to another APEX form. I want to take those passed values and use them in the where clause of the base-table in the called form. Any assistance would be greately appreciated.
Hi,
Refer this example
http://www.talkapex.com/2009/07/apex-how-to-pass-multiselect-list.html
Example: http://apex.oracle.com/pls/otn/f?p=20195:2100
Regards,
Kartik Patel
http://patelkartik.blogspot.com/
http://apex.oracle.com/pls/apex/f?p=9904351712:1 -
How to pass values to select options of custom transactions?
I have to call custom transaction-ZMM_POST from my custom report.
I have to pass values to select options(Not to parameters) of ZMM_POST from my report only.
Please tell me how to pass values to select options of custom transactions?Have you tried this?
DATA: T_RSPARAMS TYPE STANDARD TABLE OF RSPARAMS WITH HEADER LINE.
T_RSPARAMS-SELNAME = "S_BUKRS".
T_RSPARAMS-KIND = "S".
T_RSPARAMS-SIGN = "I".
T_RSPARAMS-OPTION = "BT".
T_RSPARAMS-LOW = "100".
T_RSPARAMS-HIGH = "300"
APPEND T_RSPARAMS.
SUBMIT Z_DUMMY WITH SELECTION-TABLE T_RSPARAMS.
Greetings,
Blag.
Maybe you are looking for
-
LMS Prime: After adding a new Certificate LMS Services not starting
Hello, we changed the LMS from a self signed certificate to a certificate issued from our corporate ca. Since about 30 services could start anymore. We are using LMS 4.1 on a Soft Appliance. I verified the certifcate with the SSLUtil and everything l
-
i want to update my iphone 4 having 4.3.2 version in it.. pls suggest in which version i should update.. thank you.
-
Cannot download file over https behind firewall ?
I have a program to download files : public class TestServlet public static void main(String args[]){ Authenticator.setDefault(new AuthImpl()); if (args.length!=2){ System.out.println("Proper Usage: java -Dhttp.proxyHost=172.21.32
-
I had a problem with my project opening when it was backed up to a network drive. I went back to my version on my hard drive it took a few minutes to open. Once open the storyboard looked fine when I tried to Preview the Project several slides do not
-
Connecting to multiple servers via smartview
Currently my users do side by side comparison between the HFM application on the Production Server and then Development server. To do this, they create a report in each environment, but i'm wondering; is there anyway to create a report to connect the