Selectively Install Testing Repo Pkgs

Is there any way to selectively install and update packages from the testing repo? For example I wanted to get gtk-sharp-2 and keep that up to date with whats in testing, but don't want to get gcc 4 everytime I run a system update.

yeah, put testing last (so and -Syu won't grab package from it) and then do "pacman -S testing/gcc"

Similar Messages

Test Manager cannot install Test Agent on selected VMs (trying to create a new environment)

I am trying to create a new SCVMM environment.
I picked a bunch of VMs that are up and running.
I know the administrator credentials for these VMs (It's the same for all of the chosen VMs)
I have a test controller on my dev machine which is also up and running.
But I'm getting an error in the Verification step saying -
"Microsoft test manager cannot install test agent on these machines. Possible causes:
- Machines are not running or they are not available on the network.
- The File and Printer sharing exception is not enabled on the machines."
I have done the following -
1) Disabled firewalls on all the machines
2) Network Adapters on all the machines are connected (ON) and their drivers are up to date
3) Enabled file and printer sharing exceptions on all machines
Still getting the same error.
Any ideas?
Thanks a bunch!

That's probably a very well written description of what
you've done... it seemed refreshingly thorough. I'm on the verge of
a cold or something, with a slightly fuzzy brain, so what I thought
I read seemed to describe you've done just about everything
correctly, except for one thing (maybe another)... If you gave the
button the instance name stepin...
stepin.addEventListener(MouseEvent.MOUSE_DOWN,
mouseDownHandler);
and you could/should change that from MOUSE_DOWN to CLICK
If that's not the problem, then it is possible the issue
arises due to the tween. Be sure to have the button instance name
assigned at both ends of the tween (I'm assuming by classic tween
you mean a timeline tween). For some reason objects don't like to
give up some of their past life's properties when moving from one
frame to the next, so if the beginning of the tween doesn't have an
instance name, then it's likely that it stays that way when it
reaches the other end despite you assigning the name there.
PS - for the stepin button, if you haven't already done so,
you should open it for editing and draw a rectangle in the 4th
(Hit) frame that covers the entire area of the text. It will not be
visible, but will allow clicking between letters in the button...
making it easier to click on

Unit Test repos - Upgrade to SqlDev 3.0.04 from SqlDev 2.1.1.64

Hi all,
I just installed the new SQL Developer 3.0 (3.0.04).
I have a Unit Test Repository that I created under SQL Developer 2.1.1.64 and when I get the new version 3 SQL Developer to connect to it I get a error stating that "No Repository was found on the selected connection. Would you like to create one now?"
There is certainly a repos there so I say no.
I tried the Tools|Unit Test|Create\Update repository menu option assuming it does an upgrade and I get prompted for sys credentials.
I do not want to loose my existing tests and they still work fine from SQL Deveoper 2.1 so my repos is not corrupted.
I have looked all over the doco for SQL Dev 3 but I am unable to find any detail about how to deal with upgrading the repos. Infact I cannot find any info about installing the repos from scratch??
Hope someone can help.
Cheers
Chris .....

Hi Chris,
I spent many hours with UT in SQL Developer and I think, that I know, where is your problem.
UT repository is only a group of tables, views, user rights and so on. When you go to c:\Program Files\sqldeveloper-3.0\sqldeveloper\extensions\, you can find file oracle.sqldeveloper.unit_test.jar.
Rename this file to zip and unpack.
Then go to oracle.sqldeveloper.unit_test.zip\oracle\dbtools\unit_test\repository\20\ and here you have some useful scripts.
If you want update your repository, just run update20.sql.
Then you must grant rights:
create role UT_REPO_ADMINISTRATOR;
create role UT_REPO_USER;
grant create public synonym,drop public synonym to UT_REPO_ADMINISTRATOR;
grant select on dba_role_privs to UT_REPO_USER;
grant select on dba_role_privs to UT_REPO_ADMINISTRATOR;
grant select on dba_roles to UT_REPO_ADMINISTRATOR;
grant select on dba_roles to UT_REPO_USER;
grant ut_repo_user to UT_REPO_ADMINISTRATOR with admin option;
grant UT_REPO_ADMINISTRATOR to "YOUR_UT_ADMIN_USER" with admin option;
Thats all, hope this helps...

System freezes after update w/ 'testing repo'

i'm using xfce with compiz and everything was fine til I updated my system with testing repo enabled..
here is my Xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder3) Wed Sep 5 19:30:08 PDT 2007
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
RgbPath "/usr/lib/X11/rgb"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
Option "XkbLayout" "br"
Option "XkbModel" "microsoftmult"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 85.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce2 MX/MX 400"
Option "UseEdidDpi" "false"
Option "DPI" "96 x 96"
Option "NoLogo" "true"
Option "RenderAccel" "true"
Option "TripleBuffer" "true"
Option "BackingStore" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "metamodes" "1600x1200_65 +0+0; 1600x1200 +0+0; nvidia-auto-select +0+0"
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
and my Xorg.0.log
X.Org X Server 1.4.0
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-rc1-ARCH i686
Current Operating System: Linux lost 2.6.23-ARCH #1 SMP PREEMPT Sun Nov 18 07:43:05 UTC 2007 i686
Build Date: 07 November 2007 11:19:12AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 18 23:55:47 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Videocard0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/lib/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d4540
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1039,0648 card 1043,8086 rev 03 class 06,00,00 hdr 80
(II) PCI: 00:01:0: chip 1039,0001 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:02:0: chip 1039,0963 card 0000,0000 rev 25 class 06,01,00 hdr 80
(II) PCI: 00:02:1: chip 1039,0016 card 0000,0000 rev 00 class 0c,05,00 hdr 00
(II) PCI: 00:02:5: chip 1039,5513 card 1043,8087 rev 00 class 01,01,80 hdr 00
(II) PCI: 00:02:7: chip 1039,7012 card 1043,80b0 rev a0 class 04,01,00 hdr 00
(II) PCI: 00:03:0: chip 1039,7001 card 1043,8087 rev 0f class 0c,03,10 hdr 80
(II) PCI: 00:03:1: chip 1039,7001 card 1043,8087 rev 0f class 0c,03,10 hdr 00
(II) PCI: 00:03:2: chip 1039,7002 card 1043,8087 rev 00 class 0c,03,20 hdr 00
(II) PCI: 00:04:0: chip 1039,0900 card 1043,80a7 rev 91 class 02,00,00 hdr 00
(II) PCI: 00:08:0: chip 1102,0007 card 1102,100a rev 00 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0221 card 0000,0000 rev a1 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xd6000000 - 0xd7ffffff (0x2000000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xdff00000 - 0xfebfffff (0x1ed00000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:2:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) nVidia Corporation NV44A [GeForce 6200] rev 161, Mem @ 0xd7000000/24, 0xe0000000/28, 0xd6000000/24, BIOS @ 0xdffe0000/17
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xd8000000 from 0xdbffffff to 0xd7ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xd4000000 - 0xd4000fff (0x1000) MX[b]
[1] -1 0 0xd4800000 - 0xd4800fff (0x1000) MX[b]
[2] -1 0 0xd5000000 - 0xd5000fff (0x1000) MX[b]
[3] -1 0 0xd5800000 - 0xd5800fff (0x1000) MX[b]
[4] -1 0 0xd8000000 - 0xd7ffffff (0x0) MX[b]O
[5] -1 0 0xdffe0000 - 0xdfffffff (0x20000) MX[b](B)
[6] -1 0 0xd6000000 - 0xd6ffffff (0x1000000) MX[b](B)
[7] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
[8] -1 0 0xd7000000 - 0xd7ffffff (0x1000000) MX[b](B)
[9] -1 0 0x00009400 - 0x0000941f (0x20) IX[b]
[10] -1 0 0x00009800 - 0x000098ff (0x100) IX[b]
[11] -1 0 0x0000a000 - 0x0000a07f (0x80) IX[b]
[12] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[b]
[13] -1 0 0x0000b400 - 0x0000b40f (0x10) IX[b]
[14] -1 0 0x0000e600 - 0x0000e61f (0x20) IX[b]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd4000000 - 0xd4000fff (0x1000) MX[b]
[1] -1 0 0xd4800000 - 0xd4800fff (0x1000) MX[b]
[2] -1 0 0xd5000000 - 0xd5000fff (0x1000) MX[b]
[3] -1 0 0xd5800000 - 0xd5800fff (0x1000) MX[b]
[4] -1 0 0xd8000000 - 0xd7ffffff (0x0) MX[b]O
[5] -1 0 0xdffe0000 - 0xdfffffff (0x20000) MX[b](B)
[6] -1 0 0xd6000000 - 0xd6ffffff (0x1000000) MX[b](B)
[7] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
[8] -1 0 0xd7000000 - 0xd7ffffff (0x1000000) MX[b](B)
[9] -1 0 0x00009400 - 0x0000941f (0x20) IX[b]
[10] -1 0 0x00009800 - 0x000098ff (0x100) IX[b]
[11] -1 0 0x0000a000 - 0x0000a07f (0x80) IX[b]
[12] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[b]
[13] -1 0 0x0000b400 - 0x0000b40f (0x10) IX[b]
[14] -1 0 0x0000e600 - 0x0000e61f (0x20) IX[b]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd4000000 - 0xd4000fff (0x1000) MX[b]
[5] -1 0 0xd4800000 - 0xd4800fff (0x1000) MX[b]
[6] -1 0 0xd5000000 - 0xd5000fff (0x1000) MX[b]
[7] -1 0 0xd5800000 - 0xd5800fff (0x1000) MX[b]
[8] -1 0 0xd8000000 - 0xd7ffffff (0x0) MX[b]O
[9] -1 0 0xdffe0000 - 0xdfffffff (0x20000) MX[b](B)
[10] -1 0 0xd6000000 - 0xd6ffffff (0x1000000) MX[b](B)
[11] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
[12] -1 0 0xd7000000 - 0xd7ffffff (0x1000000) MX[b](B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[15] -1 0 0x00009400 - 0x0000941f (0x20) IX[b]
[16] -1 0 0x00009800 - 0x000098ff (0x100) IX[b]
[17] -1 0 0x0000a000 - 0x0000a07f (0x80) IX[b]
[18] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[b]
[19] -1 0 0x0000b400 - 0x0000b40f (0x10) IX[b]
[20] -1 0 0x0000e600 - 0x0000e61f (0x20) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "type1" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.1
(II) NVIDIA GLX Module 100.14.19 Wed Sep 12 14:48:02 PDT 2007
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) NVIDIA dlloader X Driver 100.14.19 Wed Sep 12 14:14:20 PDT 2007
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="NVIDIA Corporation"
compiled for 7.1.99.2, module version = 1.0.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 2.0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd4000000 - 0xd4000fff (0x1000) MX[b]
[5] -1 0 0xd4800000 - 0xd4800fff (0x1000) MX[b]
[6] -1 0 0xd5000000 - 0xd5000fff (0x1000) MX[b]
[7] -1 0 0xd5800000 - 0xd5800fff (0x1000) MX[b]
[8] -1 0 0xd8000000 - 0xd7ffffff (0x0) MX[b]O
[9] -1 0 0xdffe0000 - 0xdfffffff (0x20000) MX[b](B)
[10] -1 0 0xd6000000 - 0xd6ffffff (0x1000000) MX[b](B)
[11] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
[12] -1 0 0xd7000000 - 0xd7ffffff (0x1000000) MX[b](B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[15] -1 0 0x00009400 - 0x0000941f (0x20) IX[b]
[16] -1 0 0x00009800 - 0x000098ff (0x100) IX[b]
[17] -1 0 0x0000a000 - 0x0000a07f (0x80) IX[b]
[18] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[b]
[19] -1 0 0x0000b400 - 0x0000b40f (0x10) IX[b]
[20] -1 0 0x0000e600 - 0x0000e61f (0x20) IX[b]
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd4000000 - 0xd4000fff (0x1000) MX[b]
[5] -1 0 0xd4800000 - 0xd4800fff (0x1000) MX[b]
[6] -1 0 0xd5000000 - 0xd5000fff (0x1000) MX[b]
[7] -1 0 0xd5800000 - 0xd5800fff (0x1000) MX[b]
[8] -1 0 0xd8000000 - 0xd7ffffff (0x0) MX[b]O
[9] -1 0 0xdffe0000 - 0xdfffffff (0x20000) MX[b](B)
[10] -1 0 0xd6000000 - 0xd6ffffff (0x1000000) MX[b](B)
[11] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
[12] -1 0 0xd7000000 - 0xd7ffffff (0x1000000) MX[b](B)
[13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0 0x00009400 - 0x0000941f (0x20) IX[b]
[19] -1 0 0x00009800 - 0x000098ff (0x100) IX[b]
[20] -1 0 0x0000a000 - 0x0000a07f (0x80) IX[b]
[21] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[b]
[22] -1 0 0x0000b400 - 0x0000b40f (0x10) IX[b]
[23] -1 0 0x0000e600 - 0x0000e61f (0x20) IX[b]
[24] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[25] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "true"
(**) NVIDIA(0): Option "RenderAccel" "true"
(**) NVIDIA(0): Option "MetaModes" "1600x1200_65 +0+0; 1600x1200 +0+0; nvidia-auto-select +0+0"
(**) NVIDIA(0): Option "UseEdidDpi" "false"
(**) NVIDIA(0): Option "DPI" "96 x 96"
(**) NVIDIA(0): Option "TripleBuffer" "true"
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 6200 (NV44) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 262144 kBytes
(--) NVIDIA(0): VideoBIOS: 05.44.a2.09.00
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 6200 at PCI:1:0:0:
(--) NVIDIA(0): Samsung SyncMaster (CRT-1)
(--) NVIDIA(0): Samsung SyncMaster (CRT-1): 400.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-1
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1600x1200_65+0+0"
(II) NVIDIA(0): "1600x1200+0+0"
(II) NVIDIA(0): "nvidia-auto-select+0+0"
(II) NVIDIA(0): Virtual screen size determined to be 1600 x 1200
(**) NVIDIA(0): DPI set to (96, 96); computed from "DPI" X config option
(**) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xd6000000 - 0xd6ffffff (0x1000000) MX[b]
[1] 0 0 0xe0000000 - 0xefffffff (0x10000000) MX[b]
[2] 0 0 0xd7000000 - 0xd7ffffff (0x1000000) MX[b]
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[7] -1 0 0xd4000000 - 0xd4000fff (0x1000) MX[b]
[8] -1 0 0xd4800000 - 0xd4800fff (0x1000) MX[b]
[9] -1 0 0xd5000000 - 0xd5000fff (0x1000) MX[b]
[10] -1 0 0xd5800000 - 0xd5800fff (0x1000) MX[b]
[11] -1 0 0xd8000000 - 0xd7ffffff (0x0) MX[b]O
[12] -1 0 0xdffe0000 - 0xdfffffff (0x20000) MX[b](B)
[13] -1 0 0xd6000000 - 0xd6ffffff (0x1000000) MX[b](B)
[14] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
[15] -1 0 0xd7000000 - 0xd7ffffff (0x1000000) MX[b](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[21] -1 0 0x00009400 - 0x0000941f (0x20) IX[b]
[22] -1 0 0x00009800 - 0x000098ff (0x100) IX[b]
[23] -1 0 0x0000a000 - 0x0000a07f (0x80) IX[b]
[24] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[b]
[25] -1 0 0x0000b400 - 0x0000b40f (0x10) IX[b]
[26] -1 0 0x0000e600 - 0x0000e61f (0x20) IX[b]
[27] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[28] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) NVIDIA(0): Initialized GART.
(II) NVIDIA(0): Unable to connect to the ACPI daemon; the ACPI daemon may not
(II) NVIDIA(0): be running or the "AcpidSocketPath" X configuration option
(II) NVIDIA(0): may not be set correctly. When the ACPI daemon is
(II) NVIDIA(0): available, the NVIDIA X driver can use it to receive ACPI
(II) NVIDIA(0): events. For details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Setting mode "1600x1200_65+0+0"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(**) NVIDIA(0): Option "BackingStore" "true"
(**) NVIDIA(0): Backing store enabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "microsoftmult"
(**) Keyboard0: XkbModel: "microsoftmult"
(**) Option "XkbLayout" "br"
(**) Keyboard0: XkbLayout: "br"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(**) Option "Protocol" "auto"
(**) Mouse0: Device: "/dev/psaux"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "no"
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 9
(**) Mouse0: Sensitivity: 1
(II) evaluating device (Mouse0)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
tossed event which came in late
mieqEnequeue: out-of-order valuator event; dropping.
tossed event which came in late
mieqEnequeue: out-of-order valuator event; dropping.
tossed event which came in late
mieqEnequeue: out-of-order valuator event; dropping.
tossed event which came in late
mieqEnequeue: out-of-order valuator event; dropping.
tossed event which came in late
mieqEnequeue: out-of-order valuator event; dropping.
tossed event which came in late
mieqEnequeue: out-of-order valuator event; dropping.
tossed event which came in late
mieqEnequeue: out-of-order valuator event; dropping.
tossed event which came in late
mieqEnequeue: out-of-order valuator event; dropping.
tossed event which came in late
mieqEnequeue: out-of-order valuator event; dropping.
tossed event which came in late
mieqEnequeue: out-of-order valuator event; dropping.
tossed event which came in late
mieqEnequeue: out-of-order valuator event; dropping.
tossed event which came in late
mieqEnequeue: out-of-order valuator event; dropping.
tossed event which came in late
mieqEnequeue: out-of-order valuator event; dropping.
tossed event which came in late
mieqEnequeue: out-of-order valuator event; dropping.
tossed event which came in late
mieqEnequeue: out-of-order valuator event; dropping.
tossed event which came in late
mieqEnequeue: out-of-order valuator event; dropping.
tossed event which came in late
mieqEnequeue: out-of-order valuator event; dropping.
tossed event which came in late
mieqEnequeue: out-of-order valuator event; dropping.
tossed event which came in late
mieqEnequeue: out-of-order valuator event; dropping.
tossed event which came in late
mieqEnequeue: out-of-order valuator event; dropping.
tossed event which came in late
mieqEnequeue: out-of-order valuator event; dropping.
tossed event which came in late
mieqEnequeue: out-of-order valuator event; dropping.
tossed event which came in late
mieqEnequeue: out-of-order valuator event; dropping.
tossed event which came in late
mieqEnequeue: out-of-order valuator event; dropping.
tossed event which came in late
mieqEnequeue: out-of-order valuator event; dropping.
tossed event which came in late
mieqEnequeue: out-of-order valuator event; dropping.
tossed event which came in late
mieqEnequeue: out-of-order valuator event; dropping.
tossed event which came in late
mieqEnequeue: out-of-order valuator event; dropping.
tossed event which came in late
mieqEnequeue: out-of-order valuator event; dropping.
tossed event which came in late
mieqEnequeue: out-of-order valuator event; dropping.
tossed event which came in late
mieqEnequeue: out-of-order valuator event; dropping.
tossed event which came in late
mieqEnequeue: out-of-order valuator event; dropping.
tossed event which came in late
mieqEnequeue: out-of-order valuator event; dropping.
tossed event which came in late
mieqEnequeue: out-of-order valuator event; dropping.
tossed event which came in late
mieqEnequeue: out-of-order valuator event; dropping.
does anyone have a clue?
thank you
maurício
Last edited by smokinjoe (2007-11-19 19:10:44)

I have the same problem, but when using my mobile via bluetooth as an input device
I get Xorg freez and only mouse cursor works.
I'm using compiz but the freez happens when I'm using keys on my mobile to controll amarok.
My logs look the same as yours.
Last edited by MAC!EK (2007-12-22 16:53:41)

[Solved]How do I safely disable [testing] repo.?

Hi.!
I installed Arch about a month ago with [testing] repo enabled.I upgraded my system a few times in the period.Now I want to disable [testing] repo.So, I edited /etc/pacman.conf and commented it out.Now on running "pacman -Syu", I get:
:: Starting full system upgrade...
warning: boost: local (1.35.0-1) is newer than extra (1.34.1-2)
warning: cracklib: local (2.8.12-1) is newer than core (2.8.10-5)
warning: deluge: local (0.9.08-2) is newer than extra (0.5.9.1-1)
warning: inputproto: local (1.4.4-1) is newer than extra (1.4.3-1)
warning: intel-dri: local (7.1-2) is newer than extra (7.0.3-1)
warning: jfsutils: local (1.1.13-1) is newer than core (1.1.12-2)
warning: libdrm: local (2.3.1-1) is newer than extra (2.3.0-1)
warning: libgl: local (7.1-2) is newer than extra (7.0.3-2)
warning: libx11: local (1.1.4-3) is newer than extra (1.1.4-2)
warning: libxau: local (1.0.4-1) is newer than extra (1.0.3-1)
warning: libxcb: local (1.1.90.1-1) is newer than extra (1.1-1)
warning: mdadm: local (2.6.7-1) is newer than core (2.6.4-1)
warning: mesa: local (7.1-1) is newer than extra (7.0.3-3)
warning: netcfg: local (2.1.0_RC1-1) is newer than core (2.0.6-1)
warning: pcmciautils: local (015-1) is newer than core (014-4)
warning: pcre: local (7.8-1) is newer than core (7.7-2)
warning: pixman: local (0.11.8-1) is newer than extra (0.10.0-1)
warning: sdparm: local (1.03-1) is newer than core (1.02-2)
warning: shadow: local (4.1.2.1-2) is newer than core (4.0.18.2-2)
warning: xcb-proto: local (1.2-1) is newer than extra (1.1-1)
warning: xf86-video-intel: local (2.4.2-1) is newer than extra (2.3.2-1)
warning: xorg-server: local (1.4.99.906-2) is newer than extra (1.4.2-2)
How do I downgrade these packages without breaking anything on my system.Just running "pacman -S <any package from warning list> gives errors like missing dependencies, existing libraries etc.So I guess that's not the optimal way.
Or do I even need to downgrade these packages.From what I read on the wiki, packages in [testing] are candidates for [core] and [extra].So, if I just let them be till they hit [core] or [extra] and then re-install them, things should go smooth, but I am not very sure on this.
Any help will be appreciated.!
Last edited by Poisonblack (2008-09-12 16:20:54)

arch0r wrote:did the same recently because of the xorg-server issue. just pacman -S all packages shown in the list
That was a quick reply.!
As I said, that gives errors like a library already exists, dependency missing etc.Like, if I try pacman -S libgl, it says a certain library already exists on filesystem.Should I just remove that library and continue installing.?
EDIT: Aah..nvm.Was trying to install packages individually which generated all those dependency, library warnings.Installing all packages simultaneously did the trick.
Thanks.!
Last edited by Poisonblack (2008-09-12 16:20:13)

Best way to update through testing repo

As I am finding out, there are certain limitations to pacman. I enabled the testing repo to try out xorg 1.7, and to see if this could help with my X delay at startup. I enabled the repo and installed xorg, gcc, and among other packages. My problem is, I dont want the testing repo enabled by default. So I comment out testing from my pacman.conf, and now I cannot upgrade without dependency errors.
Should I have used the ABS to install xorg 1.7...? Now I would like to disable the testing repo and be able to still sync and upgrade as normal. Am I missing something here...? Since I upgraded all packages from the testing repo, and now all my revisions are newer, and when I disable the repo to prevent any other updates, I am now unable to upgrade normally... So... what is the best way to upgrade through the testing repo..?
Last edited by StanIsTheMan (2009-10-23 10:15:00)

Allan wrote:
You can revert all packages to versions in [core]/[extra] by using "pacman -Suu". Otherwise, you need to wait for these to move out of [testing].
What problems are you observing?
I didn't necessarily want to downgrade all of the packages I upgraded through the testing repo. It was after upgrading the packages from the testing repo, and then commenting out the "testing" in pacman.conf, and then trying a normal 'pacman -Su'. I was then receiving errors on dependencies that were not met, and was refusing an upgrade. (which i can understand, since the testing db is being ignored, and the revision numbers are different and would cause conflicts)
I have reverted back to the earlier versions from the upgrade with a 'pacman -Suu' Now what is the proper way to upgrade just xorg..? Should I use the ABS..? I dont want to enable the testing repo, because if I do, It wants to pull in all of the testing branch that I dont want. So really my original question is... What is the bet way, or proper way to upgrade a package from the testing branch...?
Last edited by StanIsTheMan (2009-10-23 10:40:00)

[SOLVED] Transitioning from the testing repo back to stable

I enabled "testing" a while back to get Gnome 3. Now, I'd like sort of "freeze" where I am now (in other words, keep the installed packages I have) and to go back to the normal repos.
My question: can I just disable the testing repo and just wait for the normal stable releases to catch up? Should I expect a smooth transition?
Thanks.
Last edited by beniro (2011-04-19 21:13:05)

beniro wrote:
I enabled "testing" a while back to get Gnome 3. Now, I'd like sort of "freeze" where I am now (in other words, keep the installed packages I have) and to go back to the normal repos.
My question: can I just disable the testing repo and just wait for the normal stable releases to catch up? Should I expect a smooth transition?
Thanks.
It usually is. I've done that quite a few times although I don't recommend it if you are not ready for surprises (ya know, sometimes things *do* break)
Regards

My Mac won't install mpkg and pkg files.

My Mac won't install mpkg and pkg files. Whenever I double-click an pkg or mpkg file, I get the dialog box to "choose an application" to open it. After some searching, I discovered I do not have the installer.app. I tried to Repair Disk from my Snow Leopard DVD but every time it boots from the DVD, my computer crashes. Any suggestions?

You have the installer app. It is located in /System/Library/CoreServices.
Use the finder's Go menu, Go to Folder... and type /System/Library/CoreServices to open the CoreServices folder. You should see it in there. If you do not see it there then that would beg the question what else might be missing and perphas you need to do an update (re)install (or restore form a hopefully good backup).
To try to reassoicatate .[m]pkl's with the Installer, take one of your .[m]pkg's and do a finder Get Info on it and set the Open with... to the Installer app. If the Installer app is not shown use Other... at the bottom of the list to navigate to the CoreServices folder and select Installer. Then click the Change All... button.
I am not sure why your [.m]pkgs would have lost their Launch Services association with Installer in the first place (unless it really is missing).

I am trying to install the driver for a Wacom Bamboo Pad. The dmg from Wacom downloadsand will opens, but when I try to install it the message "Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be conﬁrmed"

iMac late 2009 3,06GHz Intel Core Duo; 500gb hard drive, 12gb memory. OS X 10.8.5 (Mountain Lion)
'“Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be conﬁrmed.'
I have been trying to install the driver for a Wacom Bamboo Pad. There are several driver packages listed on the website (the device is supplied ready to run with Windows devices) and I have tried tried downloading all the available drivers which apply to my set-up. Some will not open at all and I get a 'Damaged' message on my screen. Of the ones which open, I can download the .dmg and expand it but when clicked it opens as a window with multiple choice of languages and an icon which instructs you to click to open.
If I do this some versions repeat the 'damaged' message but the later ones generate a window saying:-
'“Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be conﬁrmed.' - this is as far as I can get it to go; most frustrating!
I understand that Apple's security updates have recently included an alteration that causes this result, and that there is supposed to be a legal (i.e. Apple sanctioned) workaround to allow files like this to be opened. If this is so, can anyone enlighten me?

Many Thanks, Kurt.
I knew I'd seen the solution you've provided somewhere - either in MacWorld or MacFormat - but couldn't remember the Gatekeeper bit!
I shall save it somewhere VERY safe now in case this happens again …
You have made an old man very happy and saved me from worrying that senile decay had suddenly set in. (I was 70 last week so you might understand the situation from that.)
Best wishes
OllyanDinah

I upgraded my iPad to version 5.0, I had a message on my Setting to upgrade the software to version 5.0.1, I select install and during installation my iPad2 star rebooting and now doing it non stop. I have no time to restore or do anything

Hi, I upgraded my iPad to version 5.0, I had a message on my Setting to upgrade the software to version 5.0.1, I select install and during installation my iPad2 star rebooting and now doing it non stop. I have no time to restore or do anything. My ipad rebooting every 2 or three minutes

See Here
iPad Unable to Update or Restore
http://support.apple.com/kb/ht4097

Installing Test Executive 5.0 in LabVIEW 6.0.2

I'm trying to install Test Executive 5.0 in LabVIEW 6.0.2. However, I run into problems. When i Try to mass compile the test executive folder I get a lot of errors (see attached file), and I don't get the executive in the tools menu.
Could someone tell me what needs to be done?
Thanks,
/Martin
Attachments:
mass_compile_TestExec.txt ‏32 KB

I use Test Executive 5.1 with LabView 6.1 (after doing a mass compile) and have no problems.
It looks to me like Test Executive isn't installed correctly so some VIs are missing or in not the expected place. Try reinstalling Test Executive. Don't move any of its VIs after you install it.
You get a ### Bad VI message for a VI if any of its subVI's are missing. There's probably a lot of other reasons for Bad VI, but a bad install seems like the most likely reason. A install may be bad if it's incomplete or simply if you install it to a new location and the VIs that use it are still referencing the old location.
Test Stand is a much more powerful product (and I use it on other applications), but for an existing application with a limited budget, we upgraded LabView,
the PC and Windows, but we didn't replace Test Executive with Test Stand. Going to Test Stand, you not only have the cost of the Test Stand software, you also have the development cost of rewriting some code for Test Stand. Depending on your application and how much you customized Test Executive, the development cost may be significant.

After installing Mavericks, I receive a prompt saying "To open Nexdef, you need a Java SE 6 runtime." I select "Install" but the pop up returns.

Tonight I upgraded from Mountain Lion to Mavericks. After the upgrade I get a pop up for a software update. After selecting "install" it downloads & completes the install. But then the pop-up returns. What's up? Can somebody give a pointer.
I'm running a Mid-2012 Mac Mini, but that probably doesn't matter for this discussion.

Java is a third party runtime developed by Oracle, formerly Sun who Oracle purchased.
Java 6 is near obsolete, Apple used to maintain Java 6 for OS X 10.6 and earlier, but stopped in OS X Lion and further.
Java 7 is now a user optional download directly from Oracle, however your Nexdef will also have to be updated to use Java 7.
Java has a very bad history of security issues, in fact Apple's entire Cupertino HQ was compromised by Flashback malware which targeted flaws in Java.
Perhaps by then they'll have a version for Mavericks.
If you don't need Java 7 for anything else, then don't install it. This will keep your machine more secure.
Perhaps the next Nexdef won't use Java at all, but if it does then it will either install it or demand that it does.
If you do install it, try to limit it's use in your browsers, turning it on only for sites you trust.

/lib exists in filesystem when installing testing/glibc 2.16.0-2

I'm getting this error when installing testing/glibc 2.16.0-2:
error: failed to commit transaction (conflicting files)
glibc: /lib exists in filesystem
As I did not find anything particular related to this in the mailling list or the forum, I'd like to ask: Is it safe to --force this transaction?

Same thing here. Mostly it was due to virtualbox (modules from vboxbuild). There were also two packages from AUR (networkmanager-git and cpufreq-systemd)
progandy@PAMobile ~ % LANG=en_US pacman -Qo `find /lib` | grep -v glibc
error: cannot determine ownership of directory '/lib'
error: cannot determine ownership of directory '/lib/udev'
error: cannot determine ownership of directory '/lib/udev/rules.d'
error: cannot determine ownership of directory '/lib/modules'
error: cannot determine ownership of directory '/lib/modules/extramodules-3.3-mainline'
error: No package owns /lib/modules/extramodules-3.3-mainline/vboxnetflt.ko.gz
error: No package owns /lib/modules/extramodules-3.3-mainline/vboxnetadp.ko.gz
error: No package owns /lib/modules/extramodules-3.3-mainline/vboxdrv.ko.gz
error: No package owns /lib/modules/extramodules-3.3-mainline/vboxpci.ko.gz
error: cannot determine ownership of directory '/lib/modules/extramodules-3.5-rc2-mainline'
error: No package owns /lib/modules/extramodules-3.5-rc2-mainline/vboxnetflt.ko.gz
error: No package owns /lib/modules/extramodules-3.5-rc2-mainline/vboxnetadp.ko.gz
error: No package owns /lib/modules/extramodules-3.5-rc2-mainline/vboxdrv.ko.gz
error: No package owns /lib/modules/extramodules-3.5-rc2-mainline/vboxpci.ko.gz
error: cannot determine ownership of directory '/lib/modules/extramodules-3.4-rc7-mainline'
error: No package owns /lib/modules/extramodules-3.4-rc7-mainline/vboxnetflt.ko.gz
error: No package owns /lib/modules/extramodules-3.4-rc7-mainline/vboxnetadp.ko.gz
error: No package owns /lib/modules/extramodules-3.4-rc7-mainline/vboxdrv.ko.gz
error: No package owns /lib/modules/extramodules-3.4-rc7-mainline/vboxpci.ko.gz
error: cannot determine ownership of directory '/lib/modules/3.1.2-1-ARCH'
error: cannot determine ownership of directory '/lib/modules/3.1.2-1-ARCH/updates'
error: cannot determine ownership of directory '/lib/modules/3.1.2-1-ARCH/updates/drivers'
error: cannot determine ownership of directory '/lib/modules/3.1.2-1-ARCH/updates/drivers/input'
error: cannot determine ownership of directory '/lib/modules/3.1.2-1-ARCH/updates/drivers/input/mouse'
error: cannot determine ownership of directory '/lib/modules/extramodules-3.4-rc5-mainline'
error: No package owns /lib/modules/extramodules-3.4-rc5-mainline/vboxnetflt.ko.gz
error: No package owns /lib/modules/extramodules-3.4-rc5-mainline/vboxnetadp.ko.gz
error: No package owns /lib/modules/extramodules-3.4-rc5-mainline/vboxdrv.ko.gz
error: No package owns /lib/modules/extramodules-3.4-rc5-mainline/vboxpci.ko.gz
error: cannot determine ownership of directory '/lib/modules/extramodules-3.5-rc1-mainline'
error: No package owns /lib/modules/extramodules-3.5-rc1-mainline/vboxnetflt.ko.gz
error: No package owns /lib/modules/extramodules-3.5-rc1-mainline/vboxnetadp.ko.gz
error: No package owns /lib/modules/extramodules-3.5-rc1-mainline/vboxdrv.ko.gz
error: No package owns /lib/modules/extramodules-3.5-rc1-mainline/vboxpci.ko.gz
error: cannot determine ownership of directory '/lib/modules/3.1.9-2-ARCH'
error: No package owns /lib/modules/3.1.9-2-ARCH/modules.ofmap
error: No package owns /lib/modules/3.1.9-2-ARCH/modules.ccwmap
error: No package owns /lib/modules/3.1.9-2-ARCH/modules.usbmap
error: No package owns /lib/modules/3.1.9-2-ARCH/modules.isapnpmap
error: No package owns /lib/modules/3.1.9-2-ARCH/modules.pcimap
error: No package owns /lib/modules/3.1.9-2-ARCH/modules.inputmap
error: No package owns /lib/modules/3.1.9-2-ARCH/modules.seriomap
error: No package owns /lib/modules/3.1.9-2-ARCH/modules.ieee1394map
error: cannot determine ownership of directory '/lib/modules/extramodules-3.5-rc4-mainline'
error: No package owns /lib/modules/extramodules-3.5-rc4-mainline/vboxnetflt.ko.gz
error: No package owns /lib/modules/extramodules-3.5-rc4-mainline/vboxnetadp.ko.gz
error: No package owns /lib/modules/extramodules-3.5-rc4-mainline/vboxdrv.ko.gz
error: No package owns /lib/modules/extramodules-3.5-rc4-mainline/vboxpci.ko.gz
error: cannot determine ownership of directory '/lib/modules/3.1.4-1-ARCH'
error: No package owns /lib/modules/3.1.4-1-ARCH/modules.symbols
error: No package owns /lib/modules/3.1.4-1-ARCH/modules.dep
error: cannot determine ownership of directory '/lib/modules/3.1.4-1-ARCH/updates'
error: cannot determine ownership of directory '/lib/modules/3.1.4-1-ARCH/updates/drivers'
error: cannot determine ownership of directory '/lib/modules/3.1.4-1-ARCH/updates/drivers/input'
error: cannot determine ownership of directory '/lib/modules/3.1.4-1-ARCH/updates/drivers/input/mouse'
error: No package owns /lib/modules/3.1.4-1-ARCH/modules.alias
error: No package owns /lib/modules/3.1.4-1-ARCH/modules.alias.bin
error: No package owns /lib/modules/3.1.4-1-ARCH/modules.devname
error: No package owns /lib/modules/3.1.4-1-ARCH/modules.symbols.bin
error: No package owns /lib/modules/3.1.4-1-ARCH/modules.dep.bin
error: No package owns /lib/modules/3.1.4-1-ARCH/modules.ofmap
error: No package owns /lib/modules/3.1.4-1-ARCH/modules.softdep
error: No package owns /lib/modules/3.1.4-1-ARCH/modules.ccwmap
error: No package owns /lib/modules/3.1.4-1-ARCH/modules.usbmap
error: No package owns /lib/modules/3.1.4-1-ARCH/modules.isapnpmap
error: No package owns /lib/modules/3.1.4-1-ARCH/modules.pcimap
error: No package owns /lib/modules/3.1.4-1-ARCH/modules.inputmap
error: No package owns /lib/modules/3.1.4-1-ARCH/modules.seriomap
error: No package owns /lib/modules/3.1.4-1-ARCH/modules.ieee1394map
error: cannot determine ownership of directory '/lib/modules/3.1.9-1-ARCH'
error: No package owns /lib/modules/3.1.9-1-ARCH/modules.ofmap
error: No package owns /lib/modules/3.1.9-1-ARCH/modules.ccwmap
error: No package owns /lib/modules/3.1.9-1-ARCH/modules.usbmap
error: No package owns /lib/modules/3.1.9-1-ARCH/modules.isapnpmap
error: No package owns /lib/modules/3.1.9-1-ARCH/modules.pcimap
error: No package owns /lib/modules/3.1.9-1-ARCH/modules.inputmap
error: No package owns /lib/modules/3.1.9-1-ARCH/modules.seriomap
error: No package owns /lib/modules/3.1.9-1-ARCH/modules.ieee1394map
error: cannot determine ownership of directory '/lib/modules/3.2.6-2-ARCH'
error: No package owns /lib/modules/3.2.6-2-ARCH/modules.symbols
error: No package owns /lib/modules/3.2.6-2-ARCH/modules.dep
error: No package owns /lib/modules/3.2.6-2-ARCH/modules.builtin.bin
error: No package owns /lib/modules/3.2.6-2-ARCH/modules.alias
error: No package owns /lib/modules/3.2.6-2-ARCH/modules.alias.bin
error: No package owns /lib/modules/3.2.6-2-ARCH/modules.devname
error: No package owns /lib/modules/3.2.6-2-ARCH/modules.symbols.bin
error: No package owns /lib/modules/3.2.6-2-ARCH/modules.dep.bin
error: No package owns /lib/modules/3.2.6-2-ARCH/modules.softdep
error: cannot determine ownership of directory '/lib/modules/extramodules-3.4-rc6-mainline'
error: No package owns /lib/modules/extramodules-3.4-rc6-mainline/vboxnetflt.ko.gz
error: No package owns /lib/modules/extramodules-3.4-rc6-mainline/vboxnetadp.ko.gz
error: No package owns /lib/modules/extramodules-3.4-rc6-mainline/vboxdrv.ko.gz
error: No package owns /lib/modules/extramodules-3.4-rc6-mainline/vboxpci.ko.gz
/lib/udev/rules.d/77-nm-olpc-mesh.rules is owned by networkmanager-git 20120701-1
Damn, I broke my system. Error: Could not replace directory /lib with file. glibc was removed, but not reinstalled. See you later.
Edit: Fixed with rescue cd. (remove /lib, extracte whole glibc-package to /, reboot, reinstall glibc)
Last edited by progandy (2012-07-07 19:30:47)

Starup disk was unable to select install cd as the startup disk

I was in 10.3, crashed. Had to restore (saving my things). I updated up to 9.2.2. Put in my 10.2 cd to install and I get a message...
"start up disk was unable to select install cd as the startup disk."
As far as I know I did all the updates, but could be wrong.
Anyone have an idea how I fix the problem?
dn

Tammie, please excuse my confusion, but you say you were in 10.3 (Panther) and it crashed. You say you updated to 9.2.2, then you say you put in 10.2 (Jaguar) cd to Install. At the bottom in your profile you show you are running 10.4 Tiger.
So I am confused which Operating System do you want. Your machine will not run all 4 Operating Systems at once.
To Install from a CD or DVD you Insert the Media and restart your computer holding down the C key for it to boot.
Also bear in mind that If you are not using a Full retail version of the Operating System, or the Operating System that came with your computer it will not work, if it came from another computer. Operating Systems that come with specifc computers will not mix and match with other computers.
Please tell us exactly what operating system you want to use.
Cheers Don

ATI r6xx 3D with testing repo?

Is 3D possible with testing repo for ati mobility radeon HD3670 now that mesa is 7.6 and xf86-video-ati-git is there in the repo?

3D in R6xx/R7xx is possible only with Kernel 2.6.32, not .31.
So... wait

Selectively Install Testing Repo Pkgs

Similar Messages

Maybe you are looking for