Send a mail draft automatically at a later time/date

Is it possible to set a time/date for an apple mail draft to automatically be sent? 10.10.3

Here are some prospects
You might check this out:
Schedule Mail.app to send an Email in the future
http://www.chungwasoft.com/sendlater/
That's just a few from google. Sure there are more prospects.

Similar Messages

  • How to send e-mail notification automatically when a record is inserted?

    Dear All,
    Could anyone kindly tell me how to send e-mail notification automatically when a record is inserted through a form in Oracle Portal Release 2?
    Regards,
    Ridwan.

    Hi,
    If you are writing a form on a table then you can call the mail API from a database trigger on the table. If it is a form on a procedure, you can make the email call from the procedure. To know more about sending mails from plsql go to
    http://www.quest-pipelines.com/newsletter-v2/smtp.htm
    Thanks,
    Sharmila

  • Send a mail to the vendor at the time of approval with the attachment of PO

    Hi all,
    I want to send a mail to the vendor at the time of approval by attaching the pdf of that particular PO.
    How can I achieve this?
    I know the User Exit where the code should be written.
    But I want the solution for attaching the PDF of PO at the time of approval.
    Please help me in this regard.
    Edited by: vinil kumar aturi on Mar 16, 2009 7:52 AM

    Hi,
    Try Following Code to Send mail as PDF Attachment
    In this
    Smart form Name : ZSMART_MM_003
    This will send mail to EMAIL ADDRESS SPECIFIED IN VENDOR MASTER FK03
    This code is written for ME23n so we used nast-objky(10) for purchase order no you may replace it with your purchase order no
    and smart form name with your smart form name
    *-- Send Mail---
    *-- Function Module Call to get Customer Address (Email)--
    DATA: VENDOR TYPE ELIFN,
          ADDRNO TYPE ADRNR.
    DATA: atab-mail TYPE STRING.
    SELECT SINGLE LIFNR FROM EKKO INTO VENDOR WHERE EBELN = nast-objky(10).
    SELECT SINGLE ADRNR FROM LFA1 INTO ADDRNO WHERE LIFNR = VENDOR.
    TYPE-POOLS: szadr.
    DATA adr_kompl TYPE szadr_addr1_complete.
    DATA adr1 TYPE szadr_addr1_line.
    DATA adtel TYPE szadr_adtel_line.
    DATA admail TYPE szadr_adsmtp_line.
    DATA adfax TYPE szadr_adfax_line.
    CALL FUNCTION 'ADDR_GET_COMPLETE'
           EXPORTING
                addrnumber              = ADDRNO
           IMPORTING
                addr1_complete          = adr_kompl
           EXCEPTIONS
                parameter_error         = 1
                address_not_exist       = 2
                internal_error          = 3
                wrong_access_to_archive = 4
                OTHERS                  = 5.
    Mail
      LOOP AT adr_kompl-adsmtp_tab INTO admail.
        MOVE admail-adsmtp-smtp_addr TO atab-mail.
      ENDLOOP.
    if sy-subrc = 0.
      DATA: FILENAME TYPE STRING.
      CONCATENATE 'PurchaseOrder' nast-objky INTO FILENAME SEPARATED BY '-'.
      DATA: MESSAGELINE1 TYPE STRING,
            MESSAGELINE2 TYPE STRING.
    CONCATENATE 'Do you want to send ' FILENAME ' through E-mail to' into MESSAGELINE1.
    CONCATENATE atab-mail '?' into MESSAGELINE2.
      data: answer    TYPE c.
      CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
           EXPORTING
                defaultoption = 'N'
                textline1     = MESSAGELINE1
                textline2     = MESSAGELINE2
                titel         = ' '
                start_column  = 35
                start_row     = 10
           IMPORTING
                answer        = answer.
      IF answer EQ 'J' OR answer EQ 'Y'.
    Code to find Contact person
        DATA: CONTACT TYPE EVERK.
        SELECT SINGLE VERKF FROM EKKO INTO CONTACT WHERE EBELN = nast-objky(10).
    Internal Table declarations
        DATA: I_OTF TYPE ITCOO OCCURS 0 WITH HEADER LINE,
              I_TLINE TYPE TABLE OF TLINE WITH HEADER LINE,
              I_RECEIVERS TYPE TABLE OF SOMLRECI1 WITH HEADER LINE,
              I_RECORD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
    Objects to send mail.
              I_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
              I_OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
              I_OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
              I_RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
    Work Area declarations
              WA_OBJHEAD TYPE SOLI_TAB,
              W_CTRLOP TYPE SSFCTRLOP,
              W_COMPOP TYPE SSFCOMPOP,
              W_RETURN TYPE SSFCRESCL,
              WA_DOC_CHNG TYPE SODOCCHGI1,
              W_DATA TYPE SODOCCHGI1,
              WA_BUFFER TYPE STRING, "To convert from 132 to 255
    Variables declarations
              V_FORM_NAME TYPE RS38L_FNAM,
              V_LEN_IN LIKE SOOD-OBJLEN,
              V_LEN_OUT LIKE SOOD-OBJLEN,
              V_LEN_OUTN TYPE I,
              V_LINES_TXT TYPE I,
              V_LINES_BIN TYPE I.
              DATA :  s_control_parameters TYPE ssfctrlop,
                      s_output_options     TYPE ssfcompop.
                      s_control_parameters-getotf = 'X'.
                      s_control_parameters-no_dialog = 'X'.
                      s_control_parameters-preview   = 'X'.
                      s_output_options-tdnoprint = 'X'.
                      s_output_options-tdimmed   = ''.
                      s_output_options-tddest = 'LP01'.        "Spool: Output device
                      s_output_options-tdreceiver = sy-uname.
                      s_output_options-tdcover = ''.
             CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
             EXPORTING
                FORMNAME = 'ZSMART_MM_003'
             IMPORTING
               FM_NAME = V_FORM_NAME
             EXCEPTIONS
               NO_FORM = 1
               NO_FUNCTION_MODULE = 2
               OTHERS = 3.
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
             W_CTRLOP-GETOTF = 'X'.
             W_CTRLOP-NO_DIALOG = 'X'.
             W_COMPOP-TDNOPREV = 'X'.
             CALL FUNCTION V_FORM_NAME
             EXPORTING
                CONTROL_PARAMETERS = s_control_parameters
                OUTPUT_OPTIONS = s_output_options
                USER_SETTINGS = ''
                nast          = nast
                WA_ADDRESS    = WA_ADDRESS
             IMPORTING
                JOB_OUTPUT_INFO = W_RETURN
             TABLES
                addtel  = it_addtel
                addsmtp = it_addsmtp
             EXCEPTIONS
                FORMATTING_ERROR = 1
                INTERNAL_ERROR = 2
                SEND_ERROR = 3
                USER_CANCELED = 4
                OTHERS = 5.
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Convert SMartform to pdf
          I_OTF[] = W_RETURN-OTFDATA[].
          CALL FUNCTION 'CONVERT_OTF'
          EXPORTING
            FORMAT = 'PDF'
            MAX_LINEWIDTH = 132
          IMPORTING
            BIN_FILESIZE = V_LEN_IN
          TABLES
            OTF = I_OTF
            LINES = I_TLINE
          EXCEPTIONS
           ERR_MAX_LINEWIDTH = 1
           ERR_FORMAT = 2
           ERR_CONV_NOT_POSSIBLE = 3
           OTHERS = 4.
    IF SY-SUBRC <> 0.
    ENDIF.
          LOOP AT I_TLINE.
            TRANSLATE I_TLINE USING '~'.
            CONCATENATE WA_BUFFER I_TLINE INTO WA_BUFFER.
            ENDLOOP.
            TRANSLATE WA_BUFFER USING '~'.
            DO.
              I_RECORD = WA_BUFFER.
              APPEND I_RECORD.
              SHIFT WA_BUFFER LEFT BY 255 PLACES.
              IF WA_BUFFER IS INITIAL.
                EXIT.
                ENDIF.
                ENDDO.
    Attachment
                REFRESH: I_RECLIST,
                I_OBJTXT,
                I_OBJBIN,
                I_OBJPACK.
                CLEAR WA_OBJHEAD.
                I_OBJBIN[] = I_RECORD[].
    Create Message Body Title and Description
                I_OBJTXT = 'Sir, '.
                APPEND I_OBJTXT.
                I_OBJTXT = ''.
                APPEND I_OBJTXT.
                I_OBJTXT = 'Please Find Attached '.
                APPEND I_OBJTXT.
                I_OBJTXT = FILENAME.
                APPEND I_OBJTXT.
                I_OBJTXT = 'For your reference'.
                APPEND I_OBJTXT.
                I_OBJTXT = ''.
                APPEND I_OBJTXT.
                I_OBJTXT = 'Regards'.
                APPEND I_OBJTXT.
                I_OBJTXT = CONTACT.
                APPEND I_OBJTXT.
    *Mail Subject
                DESCRIBE TABLE I_OBJTXT LINES V_LINES_TXT.
                READ TABLE I_OBJTXT INDEX V_LINES_TXT.
                WA_DOC_CHNG-OBJ_NAME = 'Purchase Order'.
                WA_DOC_CHNG-EXPIRY_DAT = SY-DATUM + 10.
                WA_DOC_CHNG-OBJ_DESCR = 'Purchase Order'.
                WA_DOC_CHNG-SENSITIVTY = 'F'.
                WA_DOC_CHNG-DOC_SIZE = V_LINES_TXT * 255.
    Main Text
                CLEAR I_OBJPACK-TRANSF_BIN.
                I_OBJPACK-HEAD_START = 1.
                I_OBJPACK-HEAD_NUM = 0.
                I_OBJPACK-BODY_START = 1.
                I_OBJPACK-BODY_NUM = V_LINES_TXT.
                I_OBJPACK-DOC_TYPE = 'RAW'.
                APPEND I_OBJPACK.
    Attachment (pdf-Attachment)
                I_OBJPACK-TRANSF_BIN = 'X'.
                I_OBJPACK-HEAD_START = 1.
                I_OBJPACK-HEAD_NUM = 0.
                I_OBJPACK-BODY_START = 1.
                DESCRIBE TABLE I_OBJBIN LINES V_LINES_BIN.
                READ TABLE I_OBJBIN INDEX V_LINES_BIN.
                I_OBJPACK-DOC_SIZE = V_LINES_BIN * 255 .
                I_OBJPACK-BODY_NUM = V_LINES_BIN.
                I_OBJPACK-DOC_TYPE = 'PDF'.
                I_OBJPACK-OBJ_NAME = 'smart'.
                I_OBJPACK-OBJ_DESCR = FILENAME.
                APPEND I_OBJPACK.
                CLEAR I_RECLIST.
                I_RECLIST-RECEIVER = atab-mail.
                I_RECLIST-REC_TYPE = 'U'.
                APPEND I_RECLIST.
                CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
                EXPORTING
                  DOCUMENT_DATA = WA_DOC_CHNG
                  PUT_IN_OUTBOX = 'X'
                  COMMIT_WORK = 'X'
                TABLES
                    PACKING_LIST = I_OBJPACK
                    OBJECT_HEADER = WA_OBJHEAD
                    CONTENTS_BIN = I_OBJBIN
                    CONTENTS_TXT = I_OBJTXT
                    RECEIVERS = I_RECLIST
                EXCEPTIONS
                    TOO_MANY_RECEIVERS = 1
                    DOCUMENT_NOT_SENT = 2
                    DOCUMENT_TYPE_NOT_EXIST = 3
                    OPERATION_NO_AUTHORIZATION = 4
                    PARAMETER_ERROR = 5
                    X_ERROR = 6
                    ENQUEUE_ERROR = 7
                    OTHERS = 8.
    IF SY-SUBRC <> 0.
    WRITE:/ 'Error When Sending the File', SY-SUBRC.
    ELSE.
    WRITE:/ 'Mail sent'.
    ENDIF.
    Regards
    Nausal

  • Sending e-mails to multiple users at a time

    Hi!
    I am using weblogic portal 7.0 for personalization. I am using campaign based e-mails for targetting specific customers. I am able to send e-mail through weblogic portal for users when the user logs in. How can I send group e-mails for a specific campaign. For example, if I have to send "virus alert" campaign mail for all our registered customer. I don't want any batch file to be written for this purpose.
    I would really appreciate your help.
    Thanks
    Anand

    Hi Deepak,
    The favorites are placed in the "userhome" repository. Take a look at KM Content -> userhome -> for each username -> Favorites, there you'll find links with the favorites. You can simply copy & paste those to the other users, so you don't have to login with each one.
    Regards,
    Pascal

  • Send a mail to the user after first time login

    How to send mail  to the user after the user login for the first time in oim 11g r2

    How to send mail  to the user after the user login for the first time in oim 11g r2

  • Automatic approval of CAT time data

    Dear All,
    Generally the boss should approve the working times of the employee in CATS. But the issue is that once the employee click on release button, timesheet gets approved automatically. But this approval should be done by supervisor. He was not facing this problem earlier.
    I checked the Org Chart, I dint find any error there.
    Please guide me which settings shall I check for this?
    Regards,
    -Tina

    Hello sir,
    I could send you but we already have help.sap.com documentation so I am directing you to the fine links:
    This is the root for Approval on CATS:
    --> http://help.sap.com/erp2005_ehp_04/helpdata/EN/64/4003fb470211d189720000e8322d00/frameset.htm
    Please check:
    - Deciding on the Approval Process
    - Approval Based on Recorded Working Time Attributes
    - Approver Selection AND
    - Applications for Approving Working Times -> regarding the workflows that you can use
    I hope I have contributed sir.
    Regards,
    Bentow.

  • Can you Schedule an email to be sent at a later time in Mail 7.1?

    Hello!  Is there still no option for Sending an Email at a later time/date in Mail 7.1?? 

    Just came across this post as I'm looking for a way to do this on my iPad or phone. As far as scheduling emails on my MacBook Pro and iMac, I use Send Later. Integrates well with mail and has been updating every time mail has an update. Just type up your email as normal, and instead of clicking Send, 'Send Later' adds a Send Later button right next to the Send button. Click that and select your date and time. Very easy, simple and works well. Here's their link - http://www.chungwasoft.com/sendlater/
    Also it's not freeware, think its $9.99, but again well worth it as you get all the updates no cost.

  • Outlook (ex Hotmail) on iPhone refuses to send e-mail to more than one person

    Hi,
    I have two questions today...
    When I try to send an e-mail to more than one person from my @outlook.com address on my iPhone it fails everytime and a message pops up that it could not connect to the server. Sending e-mails to one person at a time works perfectly. I think this is a Microsoft issue as I had to verify that I was "human" before I could send a test e-mail to more than one person while logged into the Outlook website on my PC. I never had problems like this on my old Gmail and Ymail accounts. Any ideas how to fix this?
    Alternatively, I can use my @icloud.com e-mail address, but this leads to my second question. Apple states that I cannot use my iCloud e-mail address as my Apple ID. I do however not want to keep two mailboxes. Can any e-mails Apple send me (eg. receipts for purchases, etc) be sent to my iCloud address? I'll can then just keep the other e-mail address just for the Apple ID but do not have to monitor it. It this can be done please advise where I can change this.
    Any advice will be greatly appreciated.

    Some style rules that Firefox handles well on the screen can cause this problem. Many email sites have a print button which simplifies the message format and removes navigation elements, etc., and Firefox generally handles print-formatted pages better. If your email site doesn't have print-formatted pages or those do not print, a "hack" is to select the text you want to print and then choose the Selection option in the print dialog.
    To hide email addresses from recipients, you need to place them in the BCC field. What do you put in the TO field in that case? You can use your own address.

  • How to send E-Mail Notification executing through workflow?

    hi All
    I want to send E-Mail Notification executing through workflow in MDM Data Manager?
    I have tried it, But still i am unable to send E-Mail Notification?
    i will explain, how i have tried?
    1) I have created the simple workflow with the following components
        they are in sequence
          start--> process-> notify--->stop
    2)  owner of the workflow is Admin and launcher of the workflow is Admin and i have given email id to the Default Admin user in the console.
    3) i have created another user (i.e. User2) with default roles as like as Admin and i have assigned User2 to the process component in workflow and I have created e-mail address for the User2 in the console.
    4) i have created another user(i.e.User1) with default roles as like as Admin. and give e-mail address,under the notify component User1 is selected in To Field.
    5) stop component as usual
    coming to configuration part about the SMPT server in MDS.ini file
    1) in mds.ini file for the MailServer=, I have given SMTP Server name once and restarted the server and executed the workflow, but not worked
    2)in mds.ini file for the MailServer=, i have given SMTP Server IP Address and checked the port,and we have configured the host file also and restarted the server and executed the worflow , but not worked
    In all the ways i have executed and tried to send E-Mail Notifications through workflow, But I didn't
    can any one help where i have went wrong, so i can rectify  it
    what actually we have to give in mds.ini file? is any other cofiguration required for it?
    if any one have any solution for it , can you please explain me in step by step
    Thanks in Advance
    bharat.chinthapatla

    Hi Bharat,
    your steps seems to be correct. Just try to ping your mail server, to verify if your mail server is running up, besides note that mdm go throw port 25 for sending emails, so please check if you are able to send emails using port 25 in your network.
    Regards,
    Vito

  • How do I remove the "Sent from Blackberry" when sending e-mails?

    I send e-mails from my Blackberry all the time, but I do not want it to say "sent from blackberry" on the e-mails. How do I fix this?

    michelebow wrote:
    Is there any way to remove this line if I am NOT using an Enterprise server?
    Hello,
    the answer of d_fisher concerns only those who don't use an Enterprise server.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • How do I prevent Mail from automatically sending iCal acceptances?

    I am using Apple Mail 4.6 on Snow Leopard. I have multiple email accounts in Mail (personal, work, etc.) When I accept an iCal invitation, Mail automatically sends the email response without allowing me to review the email contents or the "From" address. This can lead to embarrassing situations if the email is sent from my personal account. Very uncool.
    The only workaround I have found is to make my work account the "default" account by dragging it to the top of my account list. But this isn't foolproof as Mail apparently uses the address of any currently selected Inbox or message as the From address, so I have to make sure to deselect any messages in Mail before I click "Accept" in iCal. But now if I receive an invitation to my personal calendar, my acceptance will be sent from my work address. Also not cool.
    Is there a better, more reliable way to control the "From" address in an iCal acceptance?
    Or can I prevent Mail from sending this acceptance email automatically? Ideally, I would like Mail to put an unsent iCal acceptance in Drafts or Outbox so I can review and edit the message before sending. But the Drafts and Outbox mailboxes seem to be just chimera, always disappearing. (In fact, I tried creating and sending a message while offline and it just disappeared. Didn't even go to Drafts. When I went back online, the message went "swoosh" from some unknown location. Not very smart design, Apple.)

    It looks like the only way to address this problem is by using this 3rd party software:
    iCal Reply Checker
    http://www.nhoj.co.uk/icalreplychecker/
    Does anyone know of an Apple-native solution?

  • How to send a mail automatically based on a date from ORACLE database

    Hi,
    I want to send a mail automatically based on a date from ORACLE database.
    Please help me.
    thanks
    --Sara                                                                                                                                                                                                                                   

    programs are available on net to send mail directly from oracle ie procedure s in oracle sending mails

  • TS3276 Hey. I have problems to send e-mail with Mail. The problems is I need to un active ssl ,... but when I do this,... automatically,. its active again????. Whta can i do

    Hey. I have problems to send e-mail with Mail. The problems is I need to un active ssl ,... but when I do this,... automatically,. its active again????. Whta can i do

    Try posting this in the 10.7 Mail forum. You'll get more help there.
    DALE

  • When I delete an e-mail, it automatically puts another e-mail in my inbox which says "no sender".  What am I doing wrong and how to get all these off my I-Pad?

    When I delete an e-mail, it automatically puts another e-mail in my inbox which reads "No Sender", thus I have numerous e-mails that have not really been deleted.  How can I delete all these e-mails and how to correct the issue of deleting e-mails?

    Here is one way of doing it. Left click on picture, list opens click on save as. In next window box apears save as type PNG(*.png). Then go to my pictures and print picture from there. I am not sure what print target is? That is in the list also. That may be how it is directly printed. Never used that short cut. Try it and see. I know for sure saving it to file works.

  • How to automatically send the mail without popping for send

    Hi,
    I am providing proper values in system parameters of report6. viz.
    Desformat=pdf
    Destype=mail
    mode=bitmap
    desname=Valid email id
    I am using MS MAPI (Microsoft Outlook)
    When I run the report, I get the composed mail with the pdf attachment. When I press the SEND button of the composed mail, I shall be able to send the mail.
    Is there a way to SEND the mail automatically through reports?
    Regds
    Prakash H L

    hi ,
    Try running your report in batch mode, provide batch=yes on the command line for your report. This will suppress any user interaction and will mail the report without the need for the user to click on the send button of the mail composer.
    Regards
    Oracle Reports Team.

Maybe you are looking for