Send a Mail with Body

Hi all,
I want to send a mail with text in the body...I've read some threads in the Forum but i don't understand such well...
Wich is the minimun SP version I need to be possible send mails with body? I think I've SP12 or SP13. Where can I look my SP?
Is there any blog or thread I can read about this?
Thanks a lot.
Regards.
Urtzi.

Hi,
Please check on hte adapter details to find out the options:
http://help.sap.com/saphelp_nw04/helpdata/en/6b/4493404f673028e10000000a1550b0/content.htm
Check this thread to find options available for SP12/13
http://help.sap.com/saphelp_nw04/helpdata/en/cf/9844428e9cbe30e10000000a155106/frameset.htm
Regards
Vijaya

Similar Messages

Send E-mail with Body (text) using the FM CONVERT_COMM_TYPE_DATA

Hi Experts,
I am using the FMs ADDR_GET_NEXT_COMM_TYPE and CONVERT_COMM_TYPE_DATA to send my sapscript (ZMEDRUCK) as an e-mail. My requirement is to change the body of the e-mail but i cannot find any parameter in this FM where i can add or edit body of the e-mail.
Can someone please help me?.
Thanks and Regards.

Hi Shihin11
The variable "document", what type is defined?
This is the my source code:
CASE nast-nacha.
WHEN '5'.
      xdevice = 'MAIL'.
      xdialog = space.
      CALL FUNCTION 'ADDR_GET_NEXT_COMM_TYPE'
        EXPORTING
          strategy           = c_cstrategy
          address_number     = lfa1-adrnr
        IMPORTING
          comm_type          = lvs_comm_type
          comm_values        = lvs_comm_values
        EXCEPTIONS
          address_not_exist = 1
          person_not_exist   = 2
          no_comm_type_found = 3
          internal_error     = 4
          parameter_error    = 5
          OTHERS             = 6.
      IF sy-subrc = 0.
        MOVE-CORRESPONDING nast TO w_snast.
        CLEAR w_smtp_addr.
        w_smtp_addr = lvs_comm_values-adsmtp-smtp_addr.
        CALL FUNCTION 'CONVERT_COMM_TYPE_DATA'
          EXPORTING
            pi_comm_type              = lvs_comm_type
            pi_comm_values            = lvs_comm_values
            pi_country                = nast-tland
            pi_repid                  = sy-repid
            pi_snast                  = w_snast
          IMPORTING
            pe_itcpo                  = lvs_itcpo
            pe_mail_recipient         = w_mail_recipient
            pe_mail_sender            = w_mail_sender
          EXCEPTIONS
            comm_type_not_supported   = 1
            recipient_creation_failed = 2
            sender_creation_failed    = 3
            OTHERS                    = 4.
        IF sy-subrc = 0.
        ENDIF.
      ENDIF.
      WHEN OTHERS.
      xdevice = 'PRINTER'.
      IF nast-ldest EQ space.
        xdialog = 'X'.
      ELSE.
        itcpo-tddest   = nast-ldest.
      ENDIF.
ENDCASE.
IF xscreen NE space.
    itcpo-tdpreview = 'X'.
ENDIF.
Bei Probedruck, wenn das Medium keine Drucker ist.
IF nast-sndex EQ 'X' AND nast-nacha NE '1'.
    xdevice = 'PRINTER'.
    IF nast-ldest EQ space.
      xdialog = 'X'.
    ELSE.
      itcpo-tddest   = nast-ldest.
    ENDIF.
ENDIF.
itcpo-tdnoprint = 'X'.
itcpo-tdcover    = nast-tdocover.
itcpo-tdcopies   = nast-anzal.
IF sy-ucomm EQ 'DRPR' OR
     nast-sndex EQ 'X'.
    itcpo-tdnoprint = ' '.
    itcpo-tdnoprev   = 'X'.
    itcpo-tdcopies = 1.
ENDIF.
*}   REPLACE
itcpo-tddataset = nast-dsnam.
itcpo-tdsuffix1 = nast-dsuf1.
itcpo-tdsuffix2 = nast-dsuf2.
itcpo-tdimmed    = nast-dimme.
itcpo-tddelete   = nast-delet.
itcpo-tdsenddate = nast-vsdat.
itcpo-tdsendtime = nast-vsura.
itcpo-tdprogram = sy-repid.
*{   INSERT         PROK900574                                        8
itcpo-tdnewid    = 'X'.
*}   INSERT
CALL FUNCTION 'OPEN_FORM'
       EXPORTING
                 form = xformular
                 language = ekko-spras
                 OPTIONS = itcpo
                 archive_index = toa_dara
                 archive_params = arc_params
             ARCHIVE_PARAMS = ALARC_PAR1
                 device = xdevice
                 dialog = xdialog
*{   INSERT         PROK900574                                        3
                 mail_sender    = w_mail_sender
                 mail_recipient = w_mail_recipient
*}   INSERT
       EXCEPTIONS
         canceled = 01.
IF sy-subrc NE 0.
*{   REPLACE        PROK900574                                        9
*\    PERFORM PROTOCOL_UPDATE USING '142' EKKO-EBELN SPACE SPACE SPACE.
*\    RETCO = SY-SUBRC.
    retco = sy-subrc.
    PERFORM protocol_update USING '142' ekko-ebeln space space space.
*}   REPLACE
    EXIT.
ENDIF.
Thanks

How to send a mail with HTML body from Oracle

Hi Team,
Can somebody guide me how to send a mail with HTML body from oracle.
Here is the piece of code i am trying to send a mail.
procedure SEND_MAIL is
cursor c_1 is select * from table_name;
l_mail_id varchar2(40);
-- ls_mailhost VARCHAR2(64) := Mailhost;
ls_from VARCHAR2(64) := ‘[email protected]’
ls_subject VARCHAR2(200);
ls_to VARCHAR2(64);
l_mail_conn UTL_SMTP.connection;
ls_left_menu_name VARCHAR2(64);
ll_emp_num number(8);
begin
for i in c_1 loop
begin
l_mail_conn := UTL_SMTP.OPEN_CONNECTION('IP');
UTL_SMTP.HELO(l_mail_conn, 'IP');
UTL_SMTP.MAIL(l_mail_conn, LS_FROM);
UTL_SMTP.RCPT(L_mail_conn, LS_TO);
UTL_SMTP.DATA(l_mail_conn,'From: ' ||ls_from || utl_tcp.crlf ||
'To: ' ||ls_to || utl_tcp.crlf ||
'Subject: ' ||ls_subject|| utl_tcp.crlf);
UTL_SMTP.QUIT(l_mail_conn);
exception
when no_data_found then
null;
when others then
RAISE_APPLICATION_ERROR(-20000, 'Failed to send mail due to the following error: ' || sqlerrm);
end;
end loop;
end;
Thnx

Hi Nicolas!
Have you tried to set "Output Format" for "RAW Text" to HTM in SCOT.
If HTM is missing in your dropdown-list, you could check out table SXCONVERT2. Copy the line with category T/format TXT, and change the format from TXT to HTM. The existing function
SX_OBJECT_CONVERT__T.TXT does not need to be changed. Now you should be able to choose HTM in SCOT. You will probably need som HTML-tags in your text to make it look good.
Hope this helps!
Regards
Geir

Send a mail with the class CL_HTTP_CLIENT

hi,
i use this program and i would send a mail with a attachment file PDF. I try to use the function module SO_NEW_DOCUMENT_ATT_SEND_API1 but i dont know to translate the data XSTRING to internal table.
Thank you.
*& Report ZYTEST_TRANSFER_URL2                                        *
REPORT zytest_transfer_url2                    .
*- begin of internal data
TYPE-POOLS: swfxc, icon.
DATA: l_http_client TYPE REF TO if_http_client.
DATA: l_url TYPE string.
DATA: l_code TYPE sy-subrc.
DATA: l_code_string TYPE string.
DATA: l_message_string TYPE string.
DATA: lt_http_fields TYPE tihttpnvp.
DATA: l_http_field_wa TYPE ihttpnvp.
DATA: l_char_header(40) TYPE c.
DATA: l_body_string TYPE string.
DATA : line TYPE string.
DATA: result_tab TYPE TABLE OF string,
result_str TYPE string.
*- end of internal data
DATA: lv_contents TYPE string.
DATA: lv_location TYPE string.
*- begin of parameters
PARAMETERS: url TYPE swc_value.
PARAMETERS : receiver TYPE somlreci1-receiver LOWER CASE.
*- end of parameters
START-OF-SELECTION.
PERFORM main.
*& Form main
text
FORM main.
PERFORM get_contents USING lv_contents.
*- Create the HTTP-Client
l_url = url.
l_proxy_host =
l_proxy_service =
CALL METHOD cl_http_client=>create_by_url
EXPORTING
url = l_url
proxy_host = l_proxy_host
proxy_service = l_proxy_service
IMPORTING
client = l_http_client
EXCEPTIONS
argument_not_found = 1
plugin_not_active = 2
internal_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*- send the http post
CALL METHOD l_http_client->send
    EXCEPTIONS
      http_communication_failure = 1
      http_invalid_state         = 2.
IF sy-subrc <> 0.
    WRITE: / icon_red_light AS ICON.
    CALL METHOD l_http_client->get_last_error
      IMPORTING
        code    = l_code
        MESSAGE = l_message_string.
    CALL METHOD l_http_client->close.
    l_code_string = l_code.
    CONCATENATE 'HTTP-Send: RC=' l_code_string              "#EC NOTEXT
    INTO l_code_string .
    CONCATENATE l_code_string l_message_string
    INTO l_message_string SEPARATED BY space.
    PERFORM print_string USING l_message_string.
    EXIT.
ENDIF.
*- receive the result of http post
CALL METHOD l_http_client->receive
    EXCEPTIONS
      http_communication_failure = 1
      http_invalid_state         = 2.
IF sy-subrc <> 0.
    WRITE: / icon_red_light AS ICON.
    CALL METHOD l_http_client->get_last_error
      IMPORTING
        code    = l_code
        MESSAGE = l_message_string.
    CALL METHOD l_http_client->close.
    l_code_string = l_code.
    CONCATENATE 'HTTP-Receive: RC=' l_code_string           "#EC NOTEXT
    INTO l_code_string .
    CONCATENATE l_code_string l_message_string
    INTO l_message_string SEPARATED BY space.
    PERFORM print_string USING l_message_string.
    EXIT.
ENDIF.
*- print the results
CALL METHOD l_http_client->response->get_status
    IMPORTING
      code = l_code.
IF l_code < 300.
HTTP-codes: 100 - 199 = informations
HTTP-codes: 200 - 299 = client-request successful (200 = OK)
    WRITE: / icon_green_light AS ICON.
ELSE.
HTTP-codes: 300 - 399 = redirected; further actions required
HTTP-codes: 400 - 499 = client-request incomplete
HTTP-codes: 500 - 599 = server errors
    WRITE: / icon_red_light AS ICON.
ENDIF.
*-- get the http header fields
CALL METHOD l_http_client->response->get_header_fields
    CHANGING
      fields = lt_http_fields.
LOOP AT lt_http_fields INTO l_http_field_wa.
    l_char_header = l_http_field_wa-name.
    WRITE: / l_char_header.
    l_char_header = l_http_field_wa-value.
    WRITE: l_char_header.
ENDLOOP.
WRITE: / sy-uline.
*- get the body
DATA: lv_bin_contents TYPE xstring.
lv_bin_contents = l_http_client->response->get_data( ).
PERFORM save_file USING lv_bin_contents.
ENDFORM. "main
*& Form print_string
FORM print_string USING p_string TYPE string.
REFRESH result_tab.
SPLIT p_string AT cl_abap_char_utilities=>cr_lf INTO TABLE result_tab.
LOOP AT result_tab INTO result_str.
    WRITE:/ result_str.
ENDLOOP.
ENDFORM. " print_string
*& Form save_file
text
FORM save_file USING lv_bin_contents.
DATA: save_file(1000) TYPE c VALUE '/tmp/test3.pdf'.
DATA: lv_file TYPE localfile.
DATA : g_file(80).
g_file = url.
DO.
    SHIFT g_file LEFT UP TO '/'.
    IF sy-subrc NE 0.
      EXIT.
    ENDIF.
    SHIFT g_file LEFT.
ENDDO.
SHIFT g_file RIGHT UP TO '.'.
SHIFT g_file RIGHT.
lv_file = save_file.
OPEN DATASET lv_file FOR OUTPUT IN BINARY MODE.
IF sy-subrc NE 0.
    WRITE:'SY-SUBRC :',sy-subrc.
MESSAGE i000 WITH text-014. "'File Directory not found'.
    EXIT.
ENDIF.
TRANSFER lv_bin_contents TO lv_file.
CLOSE DATASET lv_file.
IF sy-subrc <> 0.
    EXIT.
ENDIF.
IF sy-subrc EQ 0.
MESSAGE i000 WITH text-012."'Successfully downloaded to Application
server'.
    EXIT.
ENDIF.
ENDFORM. "save_file

hi,
i use this program and i would send a mail with a attachment file PDF. I try to use the function module SO_NEW_DOCUMENT_ATT_SEND_API1 but i dont know to translate the data XSTRING to internal table.
Thank you.
*& Report ZYTEST_TRANSFER_URL2                                        *
REPORT zytest_transfer_url2                    .
*- begin of internal data
TYPE-POOLS: swfxc, icon.
DATA: l_http_client TYPE REF TO if_http_client.
DATA: l_url TYPE string.
DATA: l_code TYPE sy-subrc.
DATA: l_code_string TYPE string.
DATA: l_message_string TYPE string.
DATA: lt_http_fields TYPE tihttpnvp.
DATA: l_http_field_wa TYPE ihttpnvp.
DATA: l_char_header(40) TYPE c.
DATA: l_body_string TYPE string.
DATA : line TYPE string.
DATA: result_tab TYPE TABLE OF string,
result_str TYPE string.
*- end of internal data
DATA: lv_contents TYPE string.
DATA: lv_location TYPE string.
*- begin of parameters
PARAMETERS: url TYPE swc_value.
PARAMETERS : receiver TYPE somlreci1-receiver LOWER CASE.
*- end of parameters
START-OF-SELECTION.
PERFORM main.
*& Form main
text
FORM main.
PERFORM get_contents USING lv_contents.
*- Create the HTTP-Client
l_url = url.
l_proxy_host =
l_proxy_service =
CALL METHOD cl_http_client=>create_by_url
EXPORTING
url = l_url
proxy_host = l_proxy_host
proxy_service = l_proxy_service
IMPORTING
client = l_http_client
EXCEPTIONS
argument_not_found = 1
plugin_not_active = 2
internal_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*- send the http post
CALL METHOD l_http_client->send
    EXCEPTIONS
      http_communication_failure = 1
      http_invalid_state         = 2.
IF sy-subrc <> 0.
    WRITE: / icon_red_light AS ICON.
    CALL METHOD l_http_client->get_last_error
      IMPORTING
        code    = l_code
        MESSAGE = l_message_string.
    CALL METHOD l_http_client->close.
    l_code_string = l_code.
    CONCATENATE 'HTTP-Send: RC=' l_code_string              "#EC NOTEXT
    INTO l_code_string .
    CONCATENATE l_code_string l_message_string
    INTO l_message_string SEPARATED BY space.
    PERFORM print_string USING l_message_string.
    EXIT.
ENDIF.
*- receive the result of http post
CALL METHOD l_http_client->receive
    EXCEPTIONS
      http_communication_failure = 1
      http_invalid_state         = 2.
IF sy-subrc <> 0.
    WRITE: / icon_red_light AS ICON.
    CALL METHOD l_http_client->get_last_error
      IMPORTING
        code    = l_code
        MESSAGE = l_message_string.
    CALL METHOD l_http_client->close.
    l_code_string = l_code.
    CONCATENATE 'HTTP-Receive: RC=' l_code_string           "#EC NOTEXT
    INTO l_code_string .
    CONCATENATE l_code_string l_message_string
    INTO l_message_string SEPARATED BY space.
    PERFORM print_string USING l_message_string.
    EXIT.
ENDIF.
*- print the results
CALL METHOD l_http_client->response->get_status
    IMPORTING
      code = l_code.
IF l_code < 300.
HTTP-codes: 100 - 199 = informations
HTTP-codes: 200 - 299 = client-request successful (200 = OK)
    WRITE: / icon_green_light AS ICON.
ELSE.
HTTP-codes: 300 - 399 = redirected; further actions required
HTTP-codes: 400 - 499 = client-request incomplete
HTTP-codes: 500 - 599 = server errors
    WRITE: / icon_red_light AS ICON.
ENDIF.
*-- get the http header fields
CALL METHOD l_http_client->response->get_header_fields
    CHANGING
      fields = lt_http_fields.
LOOP AT lt_http_fields INTO l_http_field_wa.
    l_char_header = l_http_field_wa-name.
    WRITE: / l_char_header.
    l_char_header = l_http_field_wa-value.
    WRITE: l_char_header.
ENDLOOP.
WRITE: / sy-uline.
*- get the body
DATA: lv_bin_contents TYPE xstring.
lv_bin_contents = l_http_client->response->get_data( ).
PERFORM save_file USING lv_bin_contents.
ENDFORM. "main
*& Form print_string
FORM print_string USING p_string TYPE string.
REFRESH result_tab.
SPLIT p_string AT cl_abap_char_utilities=>cr_lf INTO TABLE result_tab.
LOOP AT result_tab INTO result_str.
    WRITE:/ result_str.
ENDLOOP.
ENDFORM. " print_string
*& Form save_file
text
FORM save_file USING lv_bin_contents.
DATA: save_file(1000) TYPE c VALUE '/tmp/test3.pdf'.
DATA: lv_file TYPE localfile.
DATA : g_file(80).
g_file = url.
DO.
    SHIFT g_file LEFT UP TO '/'.
    IF sy-subrc NE 0.
      EXIT.
    ENDIF.
    SHIFT g_file LEFT.
ENDDO.
SHIFT g_file RIGHT UP TO '.'.
SHIFT g_file RIGHT.
lv_file = save_file.
OPEN DATASET lv_file FOR OUTPUT IN BINARY MODE.
IF sy-subrc NE 0.
    WRITE:'SY-SUBRC :',sy-subrc.
MESSAGE i000 WITH text-014. "'File Directory not found'.
    EXIT.
ENDIF.
TRANSFER lv_bin_contents TO lv_file.
CLOSE DATASET lv_file.
IF sy-subrc <> 0.
    EXIT.
ENDIF.
IF sy-subrc EQ 0.
MESSAGE i000 WITH text-012."'Successfully downloaded to Application
server'.
    EXIT.
ENDIF.
ENDFORM. "save_file

How to send HTML mail with images multipart/related message

Hi,
Could any body tell me how to send HTML mail with images in "multipart/related" message,if any body can give the code ,it would be helpful.
Thanks

Hi,
Could any body tell me how to send HTML mail with
ith images in "multipart/related" message,if any body
can give the code ,it would be helpful.
ThanksHi!
Refer to
http://developer.java.sun.com/developer/onlineTraining/JavaMail/index.html
I've found it very helpful.
Look at the last part for a code showing how to send HTML mail!
Regards

Send a mail with attached file .xls but i got file without

i tried to send a mail with attached file .xls. but i am able to send the file , we recived the file without file name. please do the same
thnaks in advance.
END-OF-SELECTION.
Populate message body text
PERFORM POPULATE_EMAIL_MESSAGE_BODY.
Send file by email as .xls speadsheet
PERFORM SEND_FILE_AS_EMAIL_ATTACHMENT
TABLES IT_MESSAGE
IT_ATTACH
USING P_EMAIL
'Example .xls documnet attachment'
'XLS'
'filename'
CHANGING GD_ERROR
GD_RECIEVER.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM INITIATE_MAIL_EXECUTE_PROGRAM.
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
FORM DATA_RETRIEVAL.
SELECT EBELN EBELP AEDAT MATNR
UP TO 10 ROWS
FROM EKPO
INTO TABLE IT_EKPO.
ENDFORM. " DATA_RETRIEVAL
*& Form BUILD_XLS_DATA_TABLE
Build data table for .xls document
FORM BUILD_XLS_DATA_TABLE.
CONSTANTS: CON_CRET TYPE X VALUE '0D', "OK for non Unicode
CON_TAB TYPE X VALUE '09'. "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
*constants:
con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
INTO IT_ATTACH SEPARATED BY ''.
CONCATENATE '' IT_ATTACH INTO IT_ATTACH.
APPEND IT_ATTACH.
LOOP AT IT_EKPO INTO WA_CHAREKPO.
CONCATENATE WA_CHAREKPO-EBELN WA_CHAREKPO-EBELP
WA_CHAREKPO-AEDAT WA_CHAREKPO-MATNR
INTO IT_ATTACH SEPARATED BY ''.
CONCATENATE '' IT_ATTACH INTO IT_ATTACH.
APPEND IT_ATTACH.
ENDLOOP.
ENDFORM. " BUILD_XLS_DATA_TABLE
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM SEND_FILE_AS_EMAIL_ATTACHMENT TABLES PIT_MESSAGE
PIT_ATTACH
USING P_EMAIL
P_MTITLE
P_FORMAT
P_FILENAME
P_ATTDESCRIPTION
P_SENDER_ADDRESS
P_SENDER_ADDRES_TYPE
CHANGING P_ERROR
P_RECIEVER.
DATA: LD_ERROR TYPE SY-SUBRC,
LD_RECIEVER TYPE SY-SUBRC,
LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
LD_EMAIL LIKE SOMLRECI1-RECEIVER,
LD_FORMAT TYPE SO_OBJ_TP ,
LD_ATTDESCRIPTION TYPE SO_OBJ_NAM ,
LD_ATTFILENAME TYPE SO_OBJ_DES ,
LD_SENDER_ADDRESS LIKE SOEXTRECI1-RECEIVER,
LD_SENDER_ADDRESS_TYPE LIKE SOEXTRECI1-ADR_TYP,
LD_RECEIVER LIKE SY-SUBRC.
LD_EMAIL = P_EMAIL.
LD_MTITLE = P_MTITLE.
LD_FORMAT = P_FORMAT.
LD_ATTDESCRIPTION = P_ATTDESCRIPTION.
LD_ATTFILENAME = P_FILENAME.
LD_SENDER_ADDRESS = P_SENDER_ADDRESS.
LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
Fill the document data.
W_DOC_DATA-DOC_SIZE = 1.
Populate the subject/generic message attributes
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
W_DOC_DATA-SENSITIVTY = 'F'.
Fill the document data and get size of attachment
CLEAR W_DOC_DATA.
READ TABLE IT_ATTACH INDEX W_CNT.
W_DOC_DATA-DOC_SIZE =
( W_CNT - 1 ) * 255 + STRLEN( IT_ATTACH ).
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE.
W_DOC_DATA-SENSITIVTY = 'F'.
CLEAR T_ATTACHMENT.
REFRESH T_ATTACHMENT.
T_ATTACHMENT[] = PIT_ATTACH[].
Describe the body of the message
CLEAR T_PACKING_LIST.
REFRESH T_PACKING_LIST.
T_PACKING_LIST-TRANSF_BIN = SPACE.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 0.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = 'RAW'.
APPEND T_PACKING_LIST.
Create attachment notification
T_PACKING_LIST-TRANSF_BIN = 'X'.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 1.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = LD_FORMAT.
T_PACKING_LIST-OBJ_DESCR = LD_ATTDESCRIPTION.
T_PACKING_LIST-OBJ_NAME = LD_ATTFILENAME.
T_PACKING_LIST-DOC_SIZE = T_PACKING_LIST-BODY_NUM * 255.
APPEND T_PACKING_LIST.
Add the recipients email address
CLEAR T_RECEIVERS.
REFRESH T_RECEIVERS.
T_RECEIVERS-RECEIVER = LD_EMAIL.
T_RECEIVERS-REC_TYPE = 'U'.
T_RECEIVERS-COM_TYPE = 'INT'.
T_RECEIVERS-NOTIF_DEL = 'X'.
T_RECEIVERS-NOTIF_NDEL = 'X'.
APPEND T_RECEIVERS.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
DOCUMENT_DATA = W_DOC_DATA
PUT_IN_OUTBOX = 'X'
SENDER_ADDRESS = LD_SENDER_ADDRESS
SENDER_ADDRESS_TYPE = LD_SENDER_ADDRESS_TYPE
COMMIT_WORK = 'X'
IMPORTING
SENT_TO_ALL = W_SENT_ALL
TABLES
PACKING_LIST = T_PACKING_LIST
CONTENTS_BIN = T_ATTACHMENT
CONTENTS_TXT = IT_MESSAGE
RECEIVERS = T_RECEIVERS
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
Populate zerror return code
LD_ERROR = SY-SUBRC.
Populate zreceiver return code
LOOP AT T_RECEIVERS.
LD_RECEIVER = T_RECEIVERS-RETRN_CODE.
ENDLOOP.
ENDFORM.
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
Instructs mail send program for SAPCONNECT to send email.
FORM INITIATE_MAIL_EXECUTE_PROGRAM.
WAIT UP TO 2 SECONDS.
SUBMIT RSCONN01 WITH MODE = 'INT'
WITH OUTPUT = 'X'
AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
Populate message body text
FORM POPULATE_EMAIL_MESSAGE_BODY.
REFRESH IT_MESSAGE.
IT_MESSAGE = 'Please find attached a list test ekpo records'.
APPEND IT_MESSAGE.
ENDFORM. " POPULATE_EMAIL_MESSAGE_BODY

PERFORM SEND_FILE_AS_EMAIL_ATTACHMENT
TABLES IT_MESSAGE
IT_ATTACH
USING P_EMAIL
'Failed IDOC Analysis report'(020)
'xls'(021)
'IDOC_REP'(022)
CHANGING GD_ERROR
GD_RECIEVER.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM INITIATE_MAIL_EXECUTE_PROGRAM.
ENDFORM.                    " F_MAIL
*& Form BUILD_XLS_DATA_TABLE
Build data table for .xls document
FORM BUILD_XLS_DATA_TABLE.
*CONSTANTS: CON_CRET TYPE X VALUE '0D', "OK for non Unicode
*CON_TAB TYPE X VALUE '09'. "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
constants:
   con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
   con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE text-040 text-041 text-042 text-043 text-044 text-045 text-046 text-047 text-048 text-049
INTO IT_ATTACH SEPARATED BY con_tab.
CONCATENATE con_cret IT_ATTACH INTO IT_ATTACH.
APPEND IT_ATTACH.
clear IT_ATTACH.
loop at i_final_t into w_final.
    CONCATENATE
    w_final-mestyp w_final-docnum w_final-statxt w_final-msgno w_final-rvplant w_final-kunnr w_final-vbeln w_final-credat
            w_final-cretim w_final-flag INTO IT_ATTACH SEPARATED BY con_tab.
    CONCATENATE con_cret IT_ATTACH INTO IT_ATTACH.
    APPEND IT_ATTACH.
    clear IT_attach.
endloop.
ENDFORM. " BUILD_XLS_DATA_TABLE
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM SEND_FILE_AS_EMAIL_ATTACHMENT TABLES PIT_MESSAGE
PIT_ATTACH
USING P_EMAIL
P_MTITLE
P_FORMAT
P_FILENAME
P_ATTDESCRIPTION
P_SENDER_ADDRESS
P_SENDER_ADDRES_TYPE
CHANGING P_ERROR
P_RECIEVER.
DATA: LD_ERROR TYPE SY-SUBRC,
LD_RECIEVER TYPE SY-SUBRC,
LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
LD_EMAIL LIKE SOMLRECI1-RECEIVER,
LD_FORMAT TYPE SO_OBJ_TP ,
LD_ATTDESCRIPTION TYPE SO_OBJ_NAM ,
LD_ATTFILENAME TYPE SO_OBJ_DES ,
LD_SENDER_ADDRESS LIKE SOEXTRECI1-RECEIVER,
LD_SENDER_ADDRESS_TYPE LIKE SOEXTRECI1-ADR_TYP,
LD_RECEIVER LIKE SY-SUBRC.
LD_EMAIL = P_EMAIL.
LD_MTITLE = P_MTITLE.
LD_FORMAT = P_FORMAT.
LD_ATTDESCRIPTION = P_ATTDESCRIPTION.
LD_ATTFILENAME = P_FILENAME.
LD_SENDER_ADDRESS = P_SENDER_ADDRESS.
LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
Fill the document data.
W_DOC_DATA-DOC_SIZE = 1.
Populate the subject/generic message attributes
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
W_DOC_DATA-SENSITIVTY = 'F'.
Fill the document data and get size of attachment
CLEAR W_DOC_DATA.
READ TABLE IT_ATTACH INDEX W_CNT.
W_DOC_DATA-DOC_SIZE =
( W_CNT - 1 ) * 255 + STRLEN( IT_ATTACH ).
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE.
W_DOC_DATA-SENSITIVTY = 'F'.
CLEAR T_ATTACHMENT.
REFRESH T_ATTACHMENT.
T_ATTACHMENT[] = PIT_ATTACH[].
Describe the body of the message
CLEAR T_PACKING_LIST.
REFRESH T_PACKING_LIST.
T_PACKING_LIST-TRANSF_BIN = SPACE.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 0.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = 'RAW'.
APPEND T_PACKING_LIST.
Create attachment notification
T_PACKING_LIST-TRANSF_BIN = 'X'.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 1.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = LD_FORMAT.
T_PACKING_LIST-OBJ_DESCR = LD_ATTDESCRIPTION.
T_PACKING_LIST-OBJ_NAME = LD_ATTFILENAME.
T_PACKING_LIST-DOC_SIZE = T_PACKING_LIST-BODY_NUM * 255.
APPEND T_PACKING_LIST.
Add the recipients email address
CLEAR T_RECEIVERS.
REFRESH T_RECEIVERS.
T_RECEIVERS-RECEIVER = LD_EMAIL.
T_RECEIVERS-REC_TYPE = 'U'.
T_RECEIVERS-COM_TYPE = 'INT'.
T_RECEIVERS-NOTIF_DEL = 'X'.
T_RECEIVERS-NOTIF_NDEL = 'X'.
APPEND T_RECEIVERS.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
    EXPORTING
      DOCUMENT_DATA              = W_DOC_DATA
      PUT_IN_OUTBOX              = 'X'
      SENDER_ADDRESS             = LD_SENDER_ADDRESS
      SENDER_ADDRESS_TYPE        = LD_SENDER_ADDRESS_TYPE
      COMMIT_WORK                = 'X'
    IMPORTING
      SENT_TO_ALL                = W_SENT_ALL
    TABLES
      PACKING_LIST               = T_PACKING_LIST
      CONTENTS_BIN               = T_ATTACHMENT
      CONTENTS_TXT               = IT_MESSAGE
      RECEIVERS                  = T_RECEIVERS
    EXCEPTIONS
      TOO_MANY_RECEIVERS         = 1
      DOCUMENT_NOT_SENT          = 2
      DOCUMENT_TYPE_NOT_EXIST    = 3
      OPERATION_NO_AUTHORIZATION = 4
      PARAMETER_ERROR            = 5
      X_ERROR                    = 6
      ENQUEUE_ERROR              = 7
      OTHERS                     = 8.
Populate zerror return code
LD_ERROR = SY-SUBRC.
Populate zreceiver return code
LOOP AT T_RECEIVERS.
    LD_RECEIVER = T_RECEIVERS-RETRN_CODE.
ENDLOOP.
ENDFORM.                    "SEND_FILE_AS_EMAIL_ATTACHMENT
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
Instructs mail send program for SAPCONNECT to send email.
FORM INITIATE_MAIL_EXECUTE_PROGRAM.
WAIT UP TO 2 SECONDS.
SUBMIT RSCONN01 WITH MODE = 'INT'
WITH OUTPUT = 'X'
AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
Populate message body text
FORM POPULATE_EMAIL_MESSAGE_BODY.
data: l1(99)    type c,
         l2(15)    type c,
         lt_message         type standard table of solisti1,
         ls_message      like line of lt_message.
clear ls_message.
l1 = 'Dear'(007).
l2 = 'Sir/Madam'(008).
concatenate l1 l2 ',' into
ls_message-line separated by space.
append ls_message to lt_message.
*insert Blank Line
clear ls_message.
ls_message-line = space.
append ls_message to lt_message.
*Assign Message text
clear ls_message.
concatenate text-011
              text-012
              into ls_message-line separated by space.
append ls_message to lt_message.
*insert Blank Line
clear ls_message.
ls_message-line = space.
append ls_message to lt_message.
*Assign Message text
clear ls_message.
concatenate text-013
              text-014
              text-015
              into ls_message-line separated by space.
append ls_message to lt_message.
concatenate text-016
              text-017
              into ls_message-line separated by space.
append ls_message to lt_message.
*insert Blank Line
clear ls_message.
ls_message-line = space.
append ls_message to lt_message.
ls_message-line = text-018.
append ls_message to lt_message.
ls_message-line = text-019.
append ls_message to lt_message.
clear: ls_message.
REFRESH IT_MESSAGE.
it_message[] = lt_message[].
APPEND IT_MESSAGE.
ENDFORM. " POPULATE_EMAIL_MESSAGE_BODY

How to send a mail with attaching a report

hi gurus,
    my requirment is i have to send a mail with attaching the report of a program to the client.. is it possible? help me with sample code.
Thanks in advance.
Regards,
Indira D

Hi Indira,
plz check out this code below,
*& Report ZATTACH                                               *
REPORT ZATTACH                   .
TABLES: ekko.
PARAMETERS: p_email   TYPE somlreci1-receiver
                                  DEFAULT '[email protected]'.
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,
      wa_ekpo TYPE t_ekpo.
TYPES: BEGIN OF t_charekpo,
ebeln(10) TYPE c,
ebelp(5) TYPE c,
aedat(8) TYPE c,
matnr(18) TYPE c,
END OF t_charekpo.
DATA: wa_charekpo TYPE t_charekpo.
DATA:   it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                WITH HEADER LINE.
DATA:   it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                WITH HEADER LINE.
DATA:   t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
        t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
        t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        w_cnt TYPE i,
        w_sent_all(1) TYPE c,
        w_doc_data LIKE sodocchgi1,
        gd_error    TYPE sy-subrc,
        gd_reciever TYPE sy-subrc.
*START_OF_SELECTION
START-OF-SELECTION.
Retrieve sample data from table ekpo
PERFORM data_retrieval.
Populate table with detaisl to be entered into .xls file
PERFORM build_xls_data_table.
*END-OF-SELECTION
END-OF-SELECTION.
Populate message body text
perform populate_email_message_body.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
                               tables it_message
                                      it_attach
                                using p_email
                                      'Example .xls documnet attachment'
                                      'XLS'
                                      'filename'
                             changing gd_error
                                      gd_reciever.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM initiate_mail_execute_program.
*&      Form DATA_RETRIEVAL
      Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT ebeln ebelp aedat matnr
   UP TO 10 ROWS
    FROM ekpo
    INTO TABLE it_ekpo.
ENDFORM.                    " DATA_RETRIEVAL
*&      Form BUILD_XLS_DATA_TABLE
      Build data table for .xls document
FORM build_xls_data_table.
CONSTANTS: con_cret TYPE x VALUE '0D', "OK for non Unicode
             con_tab TYPE x VALUE '09'.   "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
*constants:
   con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
   con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
         INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
LOOP AT it_ekpo INTO wa_charekpo.
    CONCATENATE wa_charekpo-ebeln wa_charekpo-ebelp
                wa_charekpo-aedat wa_charekpo-matnr
           INTO it_attach SEPARATED BY con_tab.
    CONCATENATE con_cret it_attach INTO it_attach.
    APPEND it_attach.
ENDLOOP.
ENDFORM.                    " BUILD_XLS_DATA_TABLE
*&      Form SEND_FILE_AS_EMAIL_ATTACHMENT
      Send email
FORM send_file_as_email_attachment tables pit_message
                                          pit_attach
                                    using p_email
                                          p_mtitle
                                          p_format
                                          p_filename
                                          p_attdescription
                                          p_sender_address
                                          p_sender_addres_type
                                 changing p_error
                                          p_reciever.
DATA: ld_error    TYPE sy-subrc,
        ld_reciever TYPE sy-subrc,
        ld_mtitle LIKE sodocchgi1-obj_descr,
        ld_email LIKE somlreci1-receiver,
        ld_format TYPE so_obj_tp ,
        ld_attdescription TYPE so_obj_nam ,
        ld_attfilename TYPE so_obj_des ,
        ld_sender_address LIKE soextreci1-receiver,
        ld_sender_address_type LIKE soextreci1-adr_typ,
        ld_receiver LIKE sy-subrc.
ld_email   = p_email.
ld_mtitle = p_mtitle.
ld_format              = p_format.
ld_attdescription      = p_attdescription.
ld_attfilename         = p_filename.
ld_sender_address      = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
     ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name   = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = pit_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num   = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type   = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name   = ld_attfilename.
t_packing_list-doc_size   = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
            document_data              = w_doc_data
            put_in_outbox              = 'X'
            sender_address             = ld_sender_address
            sender_address_type        = ld_sender_address_type
            commit_work                = 'X'
       IMPORTING
            sent_to_all                = w_sent_all
       TABLES
            packing_list               = t_packing_list
            contents_bin               = t_attachment
            contents_txt               = it_message
            receivers                  = t_receivers
       EXCEPTIONS
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            OTHERS                     = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
    ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
*&      Form INITIATE_MAIL_EXECUTE_PROGRAM
      Instructs mail send program for SAPCONNECT to send email.
FORM initiate_mail_execute_program.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
                WITH output = 'X'
                AND RETURN.
ENDFORM.                    " INITIATE_MAIL_EXECUTE_PROGRAM
*&      Form POPULATE_EMAIL_MESSAGE_BODY
       Populate message body text
form populate_email_message_body.
REFRESH it_message.
it_message = 'Please find attached a list test ekpo records'.
APPEND it_message.
endform.
" POPULATE_EMAIL_MESSAGE_BODY
<b>
Reward points if this helps,</b>
Kiran

How to send e-mail with an attachment from remote database server.???

Hi All,
I have tried the simple mail sending and with the attachment using UTL_SMTP. But the problem is , it is sending the mail with attachment of the file name i give, it takes and creates that file and sends as attachment not from the actual file location. I am trying to attach the file which i stored in remote database server.
The following code I tried. But not worked for attachment
DECLARE
   v_From       VARCHAR2(80) := '[email protected]';
   v_Recipient VARCHAR2(80) := '[email protected]';
   v_Subject    VARCHAR2(80) := 'test subject';
   v_Mail_Host VARCHAR2(30) := 'pop3.somedomain.com';
   v_Mail_Conn utl_smtp.Connection;
   crlf         VARCHAR2(2) := chr(13)||chr(10);
BEGIN
v_Mail_Conn := utl_smtp.Open_Connection(v_Mail_Host, 25);
utl_smtp.Helo(v_Mail_Conn, v_Mail_Host);
utl_smtp.Mail(v_Mail_Conn, v_From);
utl_smtp.Rcpt(v_Mail_Conn, v_Recipient);
utl_smtp.Data(v_Mail_Conn,
    'Date: '   || to_char(sysdate, 'Dy, DD Mon YYYY hh24:mi:ss') || crlf ||
    'From: '   || v_From || crlf ||
    'Subject: '|| v_Subject || crlf ||
    'To: '     || v_Recipient || crlf ||
    'MIME-Version: 1.0'|| crlf ||     -- Use MIME mail standard
    'Content-Type: multipart/mixed;'|| crlf ||
    ' boundary="-----SECBOUND"'|| crlf ||
    crlf ||
    '-------SECBOUND'|| crlf ||
    'Content-Type: text/html;'|| crlf ||
    'Content-Transfer_Encoding: 7bit'|| crlf ||
    crlf ||
    'some message text'|| crlf ||     -- Message body
    'more message text'|| crlf ||
    crlf ||
    '-------SECBOUND'|| crlf ||
    'Content-Type: text/html;'|| crlf ||
    ' name="Fund Authorization report"'|| crlf ||
    'Content-Transfer_Encoding: 8bit'|| crlf ||
    'Content-Disposition: attachment;'|| crlf ||
    ' filename="/usr/tmp/Test.html"'|| crlf ||
    crlf ||
    'HTML Attachment'|| crlf ||     -- Content of attachment
    crlf ||
    '-------SECBOUND--'               -- End MIME mail
utl_smtp.Quit(v_mail_conn);
EXCEPTION
WHEN utl_smtp.Transient_Error OR utl_smtp.Permanent_Error then
    raise_application_error(-20000, 'Unable to send mail: '||sqlerrm);
END;How can I attach a file which is stored in database server and send it in a mail.
Please someone help me in this.
Thanks,
Alaka.

Try this code
Regards Salim.
CREATE OR REPLACE TRIGGER EmailOnServerErr AFTER SERVERERROR ON DATABASE
DECLARE
   mail_conn       UTL_SMTP.connection;
   crlf            VARCHAR2(2) := chr(13)||chr(10);
   msg             VARCHAR2(32760);
   sid_name        VARCHAR2(16);
   bdump_dest      VARCHAR2(128);
   smtp_relay      VARCHAR2(32) := 'MyMailRelay';
   recipient_address VARCHAR2(64) := '[email protected]';
   sender_address     VARCHAR2(64) := '[email protected]';
   mail_port       NUMBER := 25;
   log_file_handle UTL_FILE.FILE_TYPE;
   log_file_dir    VARCHAR2(256) := 'ERR_LOG_DIR';
   log_file_name   VARCHAR2(256) := 'OracleErrors.log';
   maxlinesize     NUMBER := 32767;
   session_rec     sys.v_$session%ROWTYPE;
   audit_rec       sys.dba_audit_trail%ROWTYPE;
   auditing        BOOLEAN;
   LinesOfSQL      BINARY_INTEGER;
   offending_sql   DBMS_STANDARD.ora_name_list_t;
   CURSOR bdump_cur IS
      SELECT TRIM(value)
      FROM v$parameter
      WHERE name = 'background_dump_dest'
   CURSOR sid_cur IS
      SELECT TRIM(instance_name)
      FROM v$instance
   CURSOR session_cur IS
      SELECT s.*
      FROM v$session s
      WHERE s.sid = dbms_support.mysid
   CURSOR audit_trail_cur(AUDSID IN NUMBER) IS
      SELECT *
      FROM dba_audit_trail
      WHERE sessionid = AUDSID
BEGIN
   IF (USER = 'SYSTEM' OR USER = 'SYS') THEN
      -- Ignore this error
      NULL;
   ELSIF IS_SERVERERROR (1034) THEN
      -- Ignore this error
      NULL;
   ELSE
      -- get the sid
      OPEN sid_cur;
      FETCH sid_cur INTO sid_name;
      CLOSE sid_cur;
      -- get the location of the alert log
      OPEN bdump_cur;
      FETCH bdump_cur INTO bdump_dest;
      CLOSE bdump_cur;
      -- get the session information
      OPEN session_cur;
      FETCH session_cur INTO session_rec;
      CLOSE session_cur;
      -- get the audit_trail information if it exists
      OPEN audit_trail_cur(session_rec.audsid);
      FETCH audit_trail_cur INTO audit_rec;
      auditing := audit_trail_cur%FOUND;
      CLOSE audit_trail_cur;
      IF session_rec.program = 'MyProgram.exe' THEN
         NULL; -- ignore actions from MyProgram - that's where I do maintenance
      ELSE
         -- compose the message
         msg := 'Subject: Oracle error '||' on '||sid_name||crlf;
         msg := msg||'To: '||recipient_address||crlf;
         msg := msg||'For more information see the alert log file located at:'||crlf;
         msg := msg||bdump_dest||'/alert_'||sid_name||'.log'||crlf;
         msg := msg||'or the error log file: $'||log_file_dir||'/'||log_file_name||crlf;
         msg := msg||'Error Time='||TO_CHAR(SYSDATE,'DD-Mon-YYYY HH24:MI:SS')||crlf;
         msg := msg||DBMS_UTILITY.FORMAT_CALL_STACK||crlf;
         LinesOfSQL := sql_txt(offending_sql);
         msg := msg||'Offending SQL is:'||crlf;
         FOR loop_counter IN offending_sql.FIRST..offending_sql.LAST
         LOOP
            msg := msg||offending_sql(loop_counter);
         END LOOP;
         msg := msg||crlf||'----- PL/SQL Error Stack -----'||crlf;
         msg := msg||DBMS_UTILITY.FORMAT_ERROR_STACK||crlf;
         msg := msg||'V$SESSION.SADDR='   ||session_rec.saddr   ||crlf;
         msg := msg||'V$SESSION.SID='     ||session_rec.sid     ||crlf;
         msg := msg||'V$SESSION.SERIAL#=' ||session_rec.serial# ||crlf;
         msg := msg||'V$SESSION.AUDSID=' ||session_rec.audsid ||crlf;
         msg := msg||'V$SESSION.PADDR='   ||session_rec.paddr   ||crlf;
         msg := msg||'V$SESSION.USER#='   ||session_rec.user#   ||crlf;
         msg := msg||'V$SESSION.USERNAME='||session_rec.username||crlf;
         msg := msg||'V$SESSION.COMMAND=' ||session_rec.command ||crlf;
         msg := msg||'V$SESSION.OWNERID=' ||session_rec.ownerid ||crlf;
         msg := msg||'V$SESSION.TADDR='   ||NVL(session_rec.taddr   ,'Null')||crlf;
         msg := msg||'V$SESSION.LOCKWAIT='||NVL(session_rec.lockwait,'Null')||crlf;
         msg := msg||'V$SESSION.STATUS=' ||NVL(session_rec.status ,'Null')||crlf;
         msg := msg||'V$SESSION.SERVER=' ||NVL(session_rec.server ,'Null')||crlf;
         msg := msg||'V$SESSION.SCHEMA#=' ||session_rec.schema#||crlf;
         msg := msg||'V$SESSION.SCHEMANAME=' ||NVL(session_rec.schemaname,'Null')||crlf;
         msg := msg||'V$SESSION.OSUSER='     ||NVL(session_rec.osuser    ,'Null')||crlf;
         msg := msg||'V$SESSION.PROCESS='    ||NVL(session_rec.process   ,'Null')||crlf;
         msg := msg||'V$SESSION.MACHINE='    ||NVL(session_rec.machine   ,'Null')||crlf;
         msg := msg||'V$SESSION.TERMINAL='   ||NVL(session_rec.terminal ,'Null')||crlf;
         msg := msg||'V$SESSION.PROGRAM='    ||NVL(session_rec.program   ,'Null')||crlf;
         msg := msg||'V$SESSION.TYPE='       ||NVL(session_rec.type      ,'Null')||crlf;
         msg := msg||'V$SESSION.SQL_ADDRESS='    ||session_rec.sql_address ||crlf;
         msg := msg||'V$SESSION.SQL_HASH_VALUE=' ||NVL(TO_CHAR(session_rec.sql_hash_value) ,'Null')||crlf;
         msg := msg||'V$SESSION.PREV_SQL_ADDR=' ||session_rec.prev_sql_addr||crlf;
         msg := msg||'V$SESSION.PREV_HASH_VALUE='||NVL(TO_CHAR(session_rec.prev_hash_value),'Null')||crlf;
         msg := msg||'V$SESSION.MODULE='     ||NVL(session_rec.module              ,'Null')||crlf;
         msg := msg||'V$SESSION.MODULE_HASH='||NVL(TO_CHAR(session_rec.module_hash),'Null')||crlf;
         msg := msg||'V$SESSION.ACTION='     ||NVL(session_rec.action              ,'Null')||crlf;
         msg := msg||'V$SESSION.ACTION_HASH='||NVL(TO_CHAR(session_rec.action_hash),'Null')||crlf;
         msg := msg||'V$SESSION.CLIENT_INFO='||NVL(session_rec.client_info         ,'Null')||crlf;
         msg := msg||'V$SESSION.FIXED_TABLE_SEQUENCE='||NVL(TO_CHAR(session_rec.fixed_table_sequence),'Null')||crlf;
         msg := msg||'V$SESSION.ROW_WAIT_OBJ#=' ||NVL(TO_CHAR(session_rec.row_wait_obj#) ,'Null')||crlf;
         msg := msg||'V$SESSION.ROW_WAIT_FILE#=' ||NVL(TO_CHAR(session_rec.row_wait_file#) ,'Null')||crlf;
         msg := msg||'V$SESSION.ROW_WAIT_BLOCK#='||NVL(TO_CHAR(session_rec.row_wait_block#),'Null')||crlf;
         msg := msg||'V$SESSION.ROW_WAIT_ROW#=' ||NVL(TO_CHAR(session_rec.row_wait_row#) ,'Null')||crlf;
         msg := msg||'V$SESSION.LOGON_TIME='     ||NVL(TO_CHAR(session_rec.logon_time,'DD-Mon-YYYY HH24:MI:SS'),'Null')||crlf;
         msg := msg||'V$SESSION.LAST_CALL_ET='   ||NVL(TO_CHAR(session_rec.last_call_et)   ,'Null')||crlf;
         msg := msg||'V$SESSION.PDML_ENABLED='   ||NVL(session_rec.pdml_enabled   ,'Null')||crlf;
         msg := msg||'V$SESSION.FAILOVER_TYPE=' ||NVL(session_rec.failover_type ,'Null')||crlf;
         msg := msg||'V$SESSION.FAILOVER_METHOD='||NVL(session_rec.failover_method,'Null')||crlf;
         msg := msg||'V$SESSION.FAILED_OVER='    ||NVL(session_rec.failed_over    ,'Null')||crlf;
         msg := msg||'V$SESSION.RESOURCE_CONSUMER_GROUP='||NVL(session_rec.resource_consumer_group,'Null')||crlf;
         msg := msg||'V$SESSION.PDML_STATUS='    ||NVL(session_rec.pdml_status    ,'Null')||crlf;
         msg := msg||'V$SESSION.PDDL_STATUS='    ||NVL(session_rec.pddl_status    ,'Null')||crlf;
         msg := msg||'V$SESSION.PQ_STATUS='      ||NVL(session_rec.pq_status      ,'Null')||crlf;
         IF auditing THEN
            msg := msg||'DBA_AUDIT_TRAIL.OS_USERNAME=' ||NVL(audit_rec.os_username,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.USERNAME='     ||NVL(audit_rec.username   ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.USERHOST='     ||NVL(audit_rec.userhost   ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.TERMINAL='     ||NVL(audit_rec.terminal   ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.TIMESTAMP='    ||TO_CHAR(audit_rec.timestamp,'DD-Mon-YYYY HH24:MI:SS')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.OWNER='        ||NVL(audit_rec.owner      ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.OBJ_NAME='     ||NVL(audit_rec.obj_name   ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.ACTION='       ||audit_rec.action   ||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.ACTION_NAME=' ||NVL(audit_rec.action_name   ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.NEW_OWNER='    ||NVL(audit_rec.new_owner     ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.NEW_NAME='     ||NVL(audit_rec.new_name      ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.OBJ_PRIVILEGE='||NVL(audit_rec.obj_privilege ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.SYS_PRIVILEGE='||NVL(audit_rec.sys_privilege ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.ADMIN_OPTION=' ||NVL(audit_rec.admin_option ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.GRANTEE='      ||NVL(audit_rec.grantee       ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.AUDIT_OPTION=' ||NVL(audit_rec.audit_option ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.SES_ACTIONS=' ||NVL(audit_rec.ses_actions   ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.LOGOFF_TIME=' ||NVL(TO_CHAR(audit_rec.logoff_time) ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.LOGOFF_LREAD=' ||NVL(TO_CHAR(audit_rec.logoff_lread) ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.LOGOFF_PREAD=' ||NVL(TO_CHAR(audit_rec.logoff_pread) ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.LOGOFF_LWRITE='||NVL(TO_CHAR(audit_rec.logoff_lwrite),'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.LOGOFF_DLOCK=' ||NVL(audit_rec.logoff_dlock ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.COMMENT_TEXT=' ||NVL(audit_rec.comment_text ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.SESSIONID='    ||audit_rec.sessionid   ||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.ENTRYID='      ||audit_rec.entryid     ||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.STATEMENTID=' ||audit_rec.statementid ||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.RETURNCODE='   ||audit_rec.returncode ||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.PRIV_USED='    ||NVL(audit_rec.priv_used,'Null')||crlf;
         END IF;
         msg := msg||'-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-'||crlf||crlf;
         -- write the message to the error log file
         log_file_handle := UTL_FILE.FOPEN (log_file_dir, log_file_name, 'A',maxlinesize);
         UTL_FILE.PUT_LINE(log_file_handle,msg);
         UTL_FILE.FCLOSE(log_file_handle);
         -- send the message by Email
         mail_conn := UTL_SMTP.open_connection(smtp_relay, mail_port);
         UTL_SMTP.HELO(mail_conn, smtp_relay);
         UTL_SMTP.MAIL(mail_conn, sender_address);
         UTL_SMTP.RCPT(mail_conn, recipient_address);
         UTL_SMTP.DATA(mail_conn, msg);
         UTL_SMTP.QUIT(mail_conn);
      END IF; -- client_program = MyProgram.exe
   END IF;
END;
/

How to send a mail with rich text content like using outlook

Hi All. I have a serious problem. When we send the mail from
outlook express or yahoo, we can send the mail with the text appearing
in the mail with bold font , with different colors, underlined etc.
If i type this kind of text in any word processor and mail that content through java mail then the message should be received by the recepient with all that bold,color and underlines etc as it is. Can anybody please help me in this case ASAP.

Go to this site and download the htmlArea Javascripts. Embedd them in your HTML and it will turn your normal HTML Text Area into Rich Text Area. Your real code will include all HTML tags. For example if you select some text and make it bold , the real HTML output will look like <B>YOUR TEXT </B>. So i guess your recipient should be able to receive HTML contents.
http://www.interactivetools.com/products/htmlarea/

How to send a mail with PDF attachment

Hello
Good Day!
We have a requirement to send the mail with pdf attachment. Pdf file will be remain same for all mails and it will be placed at server. We are on R12.4 and below is the database information :
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE 11.2.0.3.0 Production
TNS for Linux: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
Thanks a ton for your anticipated help!
Thanks
Gaurav

The word URGENT is considered as rude in this forum.. Nobody here is getting paid for the ansers they are giving..
Just have a look at These threads.Those will help you.

How to send e-mails with attachments using microsoft exchange servers?

I was wondering if there was a way to send e-mails with attached data files. The e-mail server utilizes a Microsoft Exchange Server. I would appreciate any help that is provided.

What version and type of development system of LabVIEW do you have. You have the SMTP Email Send File and SMTP Email Send Multiple Attachments in all except the base package.

We want to send a mail with attachment pdf file.

Hi!!!
We want to send a mail with attachment pdf file.
The PDF file this is in the server sap.

Hi,
Pls check web logs like
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
Eddy
PS.
Put yourself on the SDN world map (http://sdn.idizaai.be/sdn_world/sdn_world.html) and earn 25 points.
Spread the wor(l)d!

Send a mail with change history while changing the Routing (T-Code CA02),

Hi All,
I need to send a mail with change history while changing the Routing (T-Code CA02), Please let me know how can implement this scenario.
I am trying to find out any workflow is there for the same but we have workflow for Routing creating and Display, we donu2019t have workflow for change.
Please suggest meu2026u2026u2026u2026
Thanks,
Amjad.

Hi All,
I need to send a mail with change history while changing the Routing (T-Code CA02), Please let me know how can implement this scenario.
I am trying to find out any workflow is there for the same but we have workflow for Routing creating and Display, we donu2019t have workflow for change.
Please suggest meu2026u2026u2026u2026
Thanks,
Amjad.

Send a mail with a picture from mime repository

Hello,
I want to send a mail with a picture from mime repository.
The mail is sended OK, but the receiver hasn't the picture on the mail (don't find the picture).
Here is my syntax :
st_objtxt-line = '<IMG SRC="SAPR3://005056B2002D1EE3BF8F5B5ECDCA55E1" ALIGN=RIGHT WIDTH="100" HEIGHT="80">'.
append st_objtxt to t_objtxt.
"SAPR3://005056B2002D1EE3BF8F5B5ECDCA55E1" is url of my object mime .
Have you a idea to resolve this problem ? It's the syntax OK ?
Thank for your responses.
Regards.
JCAIL

Have you tried storing your picture as a business document? Have a look at the class cl_bds_document_set to read your picture from the BDS.

TS3276 Hey. I have problems to send e-mail with Mail. The problems is I need to un active ssl ,... but when I do this,... automatically,. its active again????. Whta can i do

Hey. I have problems to send e-mail with Mail. The problems is I need to un active ssl ,... but when I do this,... automatically,. its active again????. Whta can i do

Try posting this in the 10.7 Mail forum. You'll get more help there.
DALE

Send a Mail with Body

Similar Messages

Maybe you are looking for