Send an email and a pager message via modem

I would like to send an email and pager message through modem using RS 232 Serial port. How should I do that? Example codes would be appreciated.

Suna,
Here is a link to NI Developer Zone examples showing how to use the serial port on an FP-20XX module to control a modem and do file transfers. It includes the LabVIEW code for both the PC and the FP-20XX.
http://zone.ni.com/devzone/conceptd.nsf/webmain/4B5DC1F4481A33F286256B4A007D0216?OpenDocument
Regards,
Aaron

Similar Messages

  • If I try to send an email ,I got the message "the server doesn't accept this email address".It happened suddenly,before it worked correctly and I didn't change anything

    If I try to send an email ,I got the message "the server doesn't accept this email address".It happened suddenly,before it worked correctly and I didn't change anything

    Change the password on that e-mail account. It's possible that your account has been hacked/spoofed and spammers have used it to blast out junk, leaving you to 'pay the price'. If it's one where you can contact the company, contact them and ask them what's going on. (if this is g-mail, yahoo, hotmail, don't bother, there's no way to contact any sort of support)

  • I try sending an email and Firefox disrupts the connection and I have to reload the page. Also, cannot attach any documents to emails.

    I try sending an email and Firefox disrupts the connection and I always have to re-load the page. Also, I cannot attach any documents to emails.

    Try one or more of the following:
    > Restart Your Computer
    > Uninstall and Reinstall iTunes
    > Reset iPod (nothing will get deleted)
    > Look in My Computer (Windows 98, XP) OR Computer (Windows Vista or 7) and see if your iPod is in there.
    In some cases (and this happened to me before) plug your iPod in and out your computer a few times. It should get it going. If not, then I strongly recommend starting your computer.

  • I;m no longer able to use the Penn State ANGEL system (I teach on line) for my email and intead get messages about "script" problems.

    Question
    I'm no longer able to use the Penn State ANGEL system (I teach on line) for my email and instead get messages about "script" problems

    I have asked a moderator to provide assistance, they will post an invite on this thread.
    They are the only BT employees on this forum, and are a UK based team of people, who take personal ownership of your problem.
    Once you get a reply, make sure that you are logged into the forum, then click on their name, you will see a screen like this. Click on the link as shown below.
    Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
    For your own security, do not post any personal details, on this forum. That includes any tracking number you are give.
    They will respond either by phone or e-mail within 5-6 working days.
    Please use the tracked e-mail, to reply, not via the forum. Thanks
    This is the form you should see when you click on the link. If you do not see this form, then you have selected the wrong link.
    When you submit the form, you will receive an enquiry number, so please keep a note of it
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • When I go to send an email I get a message saying that it has been placed in the outbox because the email address does not allo relaying. This happens intermittently

    When I want to send an email, I. Get a message saying that the email has been placed in the outbox because the email address that I am sending it to does not allow relaying? This is intermittent and often later the email is sent.

    SEARCH!!!
    http://lmgtfy.com/?q=iphone+server+does+not+allow+relaying

  • I m trying to send a email and sms alert using php and it works fine on all systems except on Iphone,the problem is swedish charcters doesn't show on iphones used by people in sweden but works absolutely fine on iphones in india. plz help

    I m trying to send a email and sms alert to people and it works fine on all systems expect on Iphone,the problem is swedish charcters doesn't show on iphones used by people in sweden but works absolutely fine on iphones in india.
    the code i m using is right below,plz have a look and not into the problem as problem is a bit strange.
    $headers = "MIME-Version: 1.0\n" ;
                $headers .= "Content-Type: text/plain; charset=\"UTF-8\"\n";
                $headers .= "X-Priority: 1 (Highest)\n";
                $headers .= "X-MSMail-Priority: High\n";
                $headers .= "Importance: High\n";
                // Additional headers
                $headers .= 'From: Rakesh <[email protected]>' . "\r\n";
                foreach($disemail as $email)
                    $to = $email;
                    $subject = $succMessage['email_subject'];
                    $message = $smsText;
                    mail($to,'=?UTF-8?B?'.base64_encode($subject).'?=',$message,$header);
            if (stripos($_SERVER['HTTP_USER_AGENT'], 'MSIE') !== FALSE) {
            $smsText = utf8_encode($smsText);

    i have tried this new charset combination specifically for iphone and i m waiting for response from sweden alliance.....i hope this works fine as iso works great for 8-bit characters.
    would like to have your thoughts though.
    $headers .= "Content-Type:text/plain; charset=\"iso-8859-1\"\n  format=flowed Content-Transfer-Encoding: quoted-printable";

  • I tried to send an email and attach a photo and color wheel has been spinning forever

    I tried to send an email and attach a photo and color wheel has been spinning forever. Clearly it is still trying to send the message and it's been 45 minutes. I can't use my mail anymore.

    First off, did you check your internet conection? Your network connection might not be very strong. Try powering your device and turning it on again, see if that works.

  • When I am sending an email and add a recipient, and then go to add another recipient, my contact book will start at "A". How do I change it so that it will leave me at the place I left off at in my contacts?

    When I am sending an email and add a recipient, and then go to add another recipient, my contact book will start at "A". How do I change it so that it will leave me at the place I left off at in my contacts?

    When I am sending an email and add a recipient, and then go to add another recipient, my contact book will start at "A". How do I change it so that it will leave me at the place I left off at in my contacts?

  • When I try to send an email I get the message rejected by the server because it does not allow relaying.  I have sent mails for months with no problems. Can anyone help

    When I try to send an email I get the message rejected by the server because it does not allow relaying.  I have sent mails for months with no problems but has started to be recoccuring. Can anyone help please as its pointless having email on my phone otherwise :-(  as i have to wait till i log on at home to respond.
    thanks
    Alison

    https://discussions.apple.com/message/16832350#16832350  follow the link user was having same problem.  Solution was given.

  • I need to send group email and forward group email?

    I need to send group emails and forward group emails and dont find that capability with ipad or iphone

    There are quite a few group emailing apps available, but most will not allow you to forward an email, as they can only send new emails written within their own app.
    MailShot Pro, uniquely, adds group email to your device so you can send to your groups directly from the standard Mail app. This allows you to forward an email, with any attachments intact, right from Mail.
    Find out why quarter of a milllion users are now using our MailShot apps at jo.my/mailshot (iTunes link). A free version is also available to try, limited to a few small groups of contacts.
    Peter
    Soluble
    Disclosure: I am the developer of MailShot, and may receive benefit from any sales.

  • TS3276 How do I send an email and get a receipt that they opened it? I have seen this before, but don't know what setting to go to.

    How do I send an email and get a recipt that they opened it?

    Additionally, even if Mail supported it, the recipient would have to allow/consent to sending you the receipt - if I were the recipient, I would certainly not allow it. If you are sending legal or other very important files, use the "return receipt required" feature of US Mail - you will get a receipt that it was accepted with a signature.

  • Is there a way to send an email and prevent it from being forwarded

    Is there a way to send an email and prevent it from being forwarded

    Not with the most common email systems - webmail, POP, SMTP or IMAP. 
    The only email system I know of that can prevent forwarding (or copying or printing) is Lotus Notes (now called IBM Notes).  I believe it can technically be done within an MS Exchange environment, but I have never actually seen it implemented in one.

  • Write to file, send to email and pause...

    I have a procedure that writes to a file and sends as an email attachment.
    This procedure uses FOR LOOP, the goal is to get the distinct EMP ID, LOOP and his REFERENCE NUMBER, LOOPS again gets all his record on table and WRITES to file and SEND to EMAIL.
    I have a total of 1,700 files to send to each EMP, however our Email Administrator told me they could not accomodate to send emails that much, they were afraid our email server would crash.
    So I have to rewrite my procedure and use a DELAY option.. Is that possible to put the DELAY option on my code? Let say send 100 email and pause for 10 mins and so on..
    Is this possible to write on the query?

    Would it be possible to use the DBMS_LOCK.SLEEP procedure?
    From the Oracle documentation...
    SLEEP Procedure
    This procedure suspends the session for a given period of time.
    Syntax
    DBMS_LOCK.SLEEP (
    seconds IN NUMBER);
    Reference:
    http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_lock.htm#i997212
    J.Hill

  • I have downloaded the latest pages  update on my iPad, but my iMac still has version 4.3 and I cannot find out how to update it only desktop. When I try to send something from my iPad pages to via email to be opened on my desktop in Pages, it won't open P

    I have downloaded the latest pages update on my iPad, but my iMac still has Pages version 4.3, and I cannot find out how to update it on my desktop. When I try to send something from my iPad pages via email to be opened on my desktop in Pages, it won't open in Pages. I get a message that it can't be opened because the version is too old. I sent the document as a PDF and it worked. But I want to be able to use Pages back and forth. HOw do I update the Pages version on my desktop iMac?

    The file format used by the iOS versions of the iWork apps can only be read by the new iWork apps on your Mac - i.e. Keynote 6, Pages 5 & Numbers 3. Those versions for the Mac require Mavericks, OS X 10.9. The "too old" error on a Mac comes if you are trying to open an iWork '08 or earlier file in the newest apps. If you do have the newest apps you can open the files from your iPad.
    If you can't or don't want to upgrade to Mavericks & the newest iWork apps your best option would be to export/share the files from the iPad to a type an older version of iWork can read such as Word, text, Excel, etc.
    Or contact AppleCare. They made this mess, let them fix it.

  • Send encrypted emails and PIN messages

    I'm using BIS. Is there an easy way to send encrypted emails or PIN messages? I found an app on GetJar called bbCrypt (http://bit.ly/qIM7zG) that encrypts/decrypts strings using 3DES, and I know there is an S/MIME package available for BlackBerry, but I'm not sure how to use it.
    Can someone please help me?

    Anybody? Please help.

Maybe you are looking for